Mössbauer and magnetic studies of MFe2O4(M = Co, Ni) nanoparticles

Nanocrystalline MFe₂O₄ (M?=?Co, Ni) particles are synthesized by citrate precursor technique. Mössbauer and magnetic studies are carried out with the CoFe₂O₄ samples having particle sizes of 9, 14 and 30 nm and the NiFe₂O₄ samples having particle sizes of 9, 21 and 30 nm. The intrinsic magnetic parameters are found to vary with the particle size. The magnetic interactions and cation distribution present in these systems influence the room temperature Mössbauer parameters. Ferrimagnetic sextets are observed for all the different particle sizes. The observed reduction of the magnetic hyperfine field values with the decrease in the size of MFe₂O₄ particles are attributed to the intrinsic size effect and the canted spin structure at the surface of the nanoparticles.     

Magnetic nanocomposite spinel and FeCo core-shell and mesoporous systems

The fabrication of condensed silica and mesoporous silica coated spinel CoFe₂O₄ and FeCo alloy magnetic nanocomposites are reported. The encapsulation of well-defined 5 nm thick uniform silica layer on CoFe₂O₄ magnetic nanoparticles was performed. The formation of mesopores in the shell was a consequence of removal of organic group of the precursor through annealing. The NiO nanoparticles were loaded into the mesoporous silica. The mesoporous silica shells leads to a larger coercivity than that of pure CoFe₂O₄ magnetic nanoparticles due to the decrease of interparticle interactions and magneto-elastic anisotropy. In addition, the FeCo nanoparticles were coated by condensed and mesoporous silica. The condensed silica can protect the reactive FeCo alloy from oxidation up to 300 °C. However, saturation magnetization of FeCo nanoparticles coated by silica after 400 °C annealing is dramatically decreased due to the oxidation of the FeCo core. The mesoporous silica coated magnetic nanostructure loaded with NiO as a final product could be used in the field of biomedical applications.     

Preparation of silica coated cobalt ferrite magnetic nanoparticles for the purification of histidine-tagged proteins

Surface modified cobalt ferrite (CoFe₂O₄) nanoparticles containing Ni–NTA affinity group were synthesized and used for the separation of histidine tag proteins from the complex matrices through the use of imidazole side chains of histidine molecules. Firstly, CoFe₂O₄ nanoparticles with a narrow size distribution were prepared in an aqueous solution using the controlled co-precipitation method. In order to obtain small CoFe₂O₄ agglomerates, oleic acid and sodium chloride were used as dispersants. The CoFe₂O₄ particles were coated with silica and subsequently the surface of these silica coated particles (SiO₂–CoFe₂O₄) was modified by amine (NH₂) groups in order to add further functional groups on the silica shell. Then, carboxyl (–COOH) functional groups were added to the SiO₂–CoFe₂O₄ magnetic nanoparticles through the NH₂ groups. After that Nα,Nα–Bis(carboxymethyl)-l-lysine hydrate (NTA) was attached to carboxyl ends of the structure. Finally, the surface modified nanoparticles were labeled with nickel (Ni) (II) ions. Furthermore, the modified SiO₂–CoFe₂O₄ magnetic nanoparticles were utilized as a new system that allows purification of the N-terminal His-tagged recombinant small heat shock protein, Tpv-sHSP 14.3.     

Magnetic behavior of core–shell particles

We have prepared composite magnetic core–shell particles using the process of soap-free emulsion polymerization and the co-precipitation method. The shell of the synthesized composite sphere is cobalt ferrite (CoFe₂O₄) nanoparticles and the core consists of poly(styrene-co-methacrylic acid) polymer. The mean crystallite sizes of the coated CoFe₂O₄ nanoparticles were controlled in the range of 2.4–6.7 nm by the concentration of [NH₄⁺] and heated temperature. The magnetic properties of the core–shell spherical particles can go from superparamagnetic to ferromagnetic behavior depending on the crystalline sizes of CoFe₂O₄.     

Rapid,Microwave‐Assisted,and One‐Pot Synthesis of Magnetic Palladium–CoFe2O4–Graphene Composite Nanosheets and Their Applications as Recyclable Catalysts

Here, a microwave‐assisted approach has been demonstrated to rapidly prepare magnetic Pd–CoFe₂O₄–graphene (GE) composite nanosheets in ethylene glycol (EG) solvent. The generation of both Pd and CoFe₂O₄ nanoparticles is accompanied with the reduction process of graphene oxide (GO) by EG. The surface morphologies and chemical composition of the composite nanosheets are characterized by transmission electron microscopy (TEM), energy‐dispersive X‐ray spectrometer (EDS), powder X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR) measurements. The as‐prepared Pd–CoFe₂O₄–GE composite nanosheets exhibit a remarkable catalytic activity towards the reduction of 4‐nitrophenol by sodium borohydride (NaBH₄) at room temperature. The apparent kinetic rate constant (K _app) of this catalytic reaction could reach about 11.0 × 10^?3 s^?1. Moreover, the CoFe₂O₄ component exhibits a magnetic property, which could make the Pd–CoFe₂O₄–GE composite nanocatalysts separated from the suspension system. The catalytic conversion of the 4‐nitrophenol to 4‐aminophenol could reach 87.2% after four cycles. This work presents a simple, rapid, and versatile method to fabricate both metal and spinel‐type complex oxides on GE nanosheets, providing a new opportunity for their applications in the recyclable catalytic reaction.     

Plasmonics properties of trimetallic Al@Al2O3@Ag@Au and Al@Al2O3@AuAg nanostructures

Bimetallic and trimetallic nanoparticles have attracted significant attention in recent times due to their enhanced electrochemical and catalytic properties compared to monometallic nanoparticles. The numerical calculations using Mie theory has been carried out for three-layered metal nanoshell dielectric–metal–metal (DMM) system consisting of a particle with a dielectric core (Al@Al₂O₃), a middle metal Ag (Au) layer and an outer metal Au (Ag) shell. The results have been interpreted using plasmon hybridization theory. We have also prepared Al@Al₂O₃@Ag@Au and Al@Al₂O₃@AgAu triple-layered core–shell or alloy nanostructure by two-step laser ablation method and compared with calculated results. The synthesis involves temporal separations of Al, Ag, and Au deposition for step-by-step formation of triple-layered core–shell structure. To form Al@Ag nanoparticles, we ablated silver for 40 min in aluminium nanoparticle colloidal solution. As aluminium oxidizes easily in water to form alumina, the resulting structure is core–shell Al@Al₂O₃. The Al@Al₂O₃ particle acts as a seed for the incoming energetic silver particles for multilayered Al@Al₂O₃@Ag nanoparticles is formed. The silver target was then replaced by gold target and ablation was carried out for different ablation time using different laser energy for generation of Al@Al₂O₃@Ag@Au core–shell or Al@Al₂O₃@AgAu alloy. The formation of core–shell and alloy nanostructure was confirmed by UV–visible spectroscopy. The absorption spectra show shift in plasmon resonance peak of silver to gold in the range 400–520 nm with increasing ablation time suggesting formation of Ag–Au alloy in the presence of alumina particles in the solution.     

类花状ZnO-CoFe2 O4 复合纳米管束的制备及其电磁波吸收特性

在90 ℃水溶液中采用两步晶体生长法制备出类花状ZnO-CoFe₂O₄复合纳米管束.ZnO纳米管束的管壁厚度大约为60 nm,管的直径大约为350 nm,CoFe₂O₄纳米颗粒连续包覆在ZnO纳米管束的表面,CoFe₂O₄纳米颗粒尺寸小于40 nm, 壳层厚度随着CoFe₂O₄在ZnO-CoFe₂O_{4 关键词： 类花状 2}O₄')" href="#">ZnO-CoFe₂O₄ 纳米管束 微波吸收剂     

Facile Fabrication of Bicomponent CoO/CoFe2O4‐N‐Doped Graphene Hybrids with Ultrahigh Lithium Storage Capacity

A facile strategy is developed to fabricate bicomponent CoO/CoFe₂O₄‐N‐doped graphene hybrids (CoO/CoFe₂O₄‐NG). These hybrids are demonstrated to be potential high‐performance anodes for lithium‐ion batteries (LIBs). The CoO/CoFe₂O₄ nanoplatelets are finely dispersed on the surface of N‐doped graphene nanosheets (CoO/CoFe₂O₄‐NG). The CoO/CoFe₂O₄‐NG electrode exhibits ultrahigh specific capacity with 1172 mA h g^?1 at 500 mA g^?1 and 970 mA h g^?1 at 1000 mA g^?1 as well as excellent cycle stability due to the synergetic effects of N‐doped graphene and CoO/CoFe₂O₄ nanoplatelets. The well‐dispersed bicomponent CoO/CoFe₂O₄ is responsible for the high specific capacity. The N‐doped graphene with high specific surface area has dual roles: to provide active sites for dispersing the CoO/CoFe₂O₄ species and to function as an electrical conducting matrix for fast charge transfer. This method provides a simple and efficient way to configure the hybridized electrode materials with high lithium storage capacity.     

Hollow glass microspheres coated with CoFe2O4 and its microwave absorption property

Spinel CoFe₂O₄ coating on the surface of hollow glass microspheres of low density was synthesized by co-precipitation method. The phase structures, morphologies, particle size, shell thickness, chemical compositions of the composites have been characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and energy dispersive X-ray spectroscopy (EDS). The results show that CoFe₂O₄ coating on hollow glass microspheres can be achieved, and the coating layers are constituted by CoFe₂O₄ nanoparticles of mean size ca. 10 nm. The as-synthesized powder materials were uniformly dispersed into the phenolic cement, then the mixture was pasted on metal plate with the area of 200 mm×200 mm as the test plate. The test of microwave absorption was carried out by the radar-absorbing materials (RAM) reflectivity far field radar cross-section (RCS) method. The results indicate that the coated CoFe₂O₄/hollow glass microspheres composites can be applied in lightweight and strong absorption microwave absorbers.     

Leucine-coated cobalt ferrite nanoparticles: Synthesis,characterization and potential biomedical applications for drug delivery

This work was primarily focused on the synthesis, characterization and biomedical applications of cobalt ferrite (CoFe₂O₄) nanoparticles, which were synthesized by a facile solvothermal method using an amino acid of Leucine (Leu) as the surface coating agents. The morphology, structure and properties of the as-synthesized uncoated and Leu-coated CoFe₂O₄ nanoparticles were characterized in detail by means of XRD, SEM, TEM, DLS, FTIR, XPS, TGA and SQUID. More importantly, it was found that the Leu-coated CoFe₂O₄ nanoparticles can be used as the efficient drug delivery with a drug loading capacity of 0.32 mg/mg for doxorubicin hydrochloride (DOX), and the loaded DOX demonstrated a sustained and progressive release manner. The in vitro cytotoxicity studies towards the HeLa cells were carried out, and the results indicated that the Leu-coated CoFe₂O₄ nanoparticles exhibited a relatively high cell viability compared with that of bare CoFe₂O₄ nanoparticles and the DOX loaded Leu-coated CoFe₂O₄ nanoparticles presented an obvious cytotoxic effect on HeLa cells.     

The study of transition on NiFe2O4 nanoparticles prepared by co-precipitation/calcination

In this study, the NiFe₂O₄ nanoparticles have been prepared by co-precipitation and calcination process. Using a vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy dispersive spectrometer of X-ray (EDX), and X-ray photoelectron spectroscopy (XPS), the samples obtained by co-precipitation and then by further calcination have been analyzed. The experimental results show that the precursor synthesized by co-precipitation is the composite of both amorphous FeOOH and Ni(OH)₂, but has no amorphous NiFe₂O₄. The results of both EDX and XPS revealed that the FeOOH species is wrapped up by Ni(OH)₂ species. In the calcination process, the amorphous composite is dehydrated and transformed gradually into crystalline NiFe₂O₄ nanoparticles, with the metal ions diffusing. The reaction is different from the one used to prepare other ferrite (e.g., CoFe₂O₄, MnFe₂O₄, Fe₃O₄, etc.) nanoparticles directly by co-precipitation. With increasing calcination temperature, the NiFe₂O₄ grains grow and the magnetization is enhanced.     

Solid state reaction synthesis of NiFe2O4 nanoparticles

Ni-ferrite (NiFe₂O₄) nanoparticles have been synthesized via a solid state reaction process. Ni and Fe bi-metallic nanoparticles in the form of Ni₃₃Fe₆₇ alloy nanopowder are first synthesized by simultaneous evaporation of the required amounts of pure Ni and Fe metals followed by rapid condensation of the evaporated metal flux into solid state by means of an inert gas, helium, using the process of inert gas condensation (IGC). In order to form the NiFe₂O₄ structure, as-synthesized samples (Ni₃₃Fe₆₇) are annealed for 12 h in ambient conditions at different annealing temperatures. Structural analyses show that NiFe₂O₄ starts to form at around 450 °C and gets progressively well defined with increasing annealing temperatures yielding particle with size ranging between 15 and 50 nm. Besides successfully forming NiFe₂O₄, NiO/Fe₃O₄ core/shell nanoparticles have also been synthesized by adjusting the annealing conditions. Three different structures, Ni₃₃Fe₆₇, NiO/Fe₃O₄, and NiFe₂O₄, obtained in this study are compared with respect to their structural and magnetic properties.     

Exchange coupling behavior in bimagnetic CoFe2O4/CoFe2 nanocomposite

In this work we report a study of the magnetic behavior of ferrimagnetic oxide CoFe₂O₄ and ferrimagnetic oxide/ferromagnetic metal CoFe₂O₄/CoFe₂ nanocomposite. The latter compound is a good system to study hard ferrimagnet/soft ferromagnet exchange coupled. Two steps were followed to synthesize the bimagnetic CoFe₂O₄/CoFe₂ nanocomposite: (i) first, preparation of CoFe₂O₄ nanoparticles using a simple hydrothermal method, and (ii) second, reduction reaction of cobalt ferrite nanoparticles using activated charcoal in inert atmosphere and high temperature. The phase structures, particle sizes, morphology, and magnetic properties of CoFe₂O₄ nanoparticles were investigated by X-Ray diffraction (XRD), Mossbauer spectroscopy (MS), transmission electron microscopy (TEM), and vibrating sample magnetometer (VSM) with applied field up to 3.0 kOe at room temperature and 50 K. The mean diameter of CoFe₂O₄ particles is about 16 nm. Mossbauer spectra revealed two sites for Fe³⁺. One site is related to Fe in an octahedral coordination and the other one to the Fe³⁺ in a tetrahedral coordination, as expected for a spinel crystal structure of CoFe₂O₄. TEM measurements of nanocomposite showed the formation of a thin shell of CoFe₂ on the cobalt ferrite and indicate that the nanoparticles increase to about 100 nm. The magnetization of the nanocomposite showed a hysteresis loop that is characteristic of exchange coupled systems. A maximum energy product (BH)_max of 1.22 MGOe was achieved at room temperature for CoFe₂O₄/CoFe₂ nanocomposites, which is about 115% higher than the value obtained for CoFe₂O₄ precursor. The exchange coupling interaction and the enhancement of product (BH)_max in nanocomposite CoFe₂O₄/CoFe₂ are discussed.     

Investigation of exchange bias in 0.1MFe2O4/0.9BiFeO3 (M=Co, Cu, Ni) nanocomposite

The 0.1MFe₂O₄/0.9BiFeO₃ (M=Co, Cu, Ni) nanocomposite samples were synthesized by the sol-gel method. Phase composition analysis was carried out, which showed that these bulk samples were composed of a ferrimagnetic MFe₂O₄ (M=Co, Cu, Ni) and a ferroelectric antiferromagnet (FEAF) BiFeO₃ phases, respectively. The magnetic properties of all the samples were investigated by measuring their magnetization as a function of temperature and magnetic field. These results indicated that the magnetic hysteresis loops of 0.1CuFe₂O₄/0.9BiFeO₃ sample sintered in air atmosphere at 550 °C for 3 h exhibited a negative shift and an enhanced coercivity at low temperature ascribed to strong exchange coupling between the BiFeO₃ and CuFe₂O₄ grains. However, there were no magnetic hysteresis loops in both the 0.1CoFe₂O₄/0.9BiFeO₃ sample and the 0.1NiFe₂O₄/0.9BiFeO₃ sample. In view of these results, we tend to think the CuFe₂O₄/BiFeO₃ nanocomposite system may be a useful multifunctional material.     

Formation of Sn@C Yolk–Shell Nanospheres and Core–Sheath Nanowires for Highly Reversible Lithium Storage

As one promising anode material with high theoretical capacity, metallic tin has attracted much research interest in the field of lithium‐ion batteries. Here, two types of tin/carbon (Sn@C) core–shell nanostructures with inner buffering voids are fabricated from SnO₂ hollow nanospheres via a facile chemical vapor deposition (CVD) method. The crystallinity and surface topography of SnO₂ hollow nanospheres are found to affect the morphology of resultant Sn@C materials. Sn@C yolk–shell nanospheres and core–sheath nanowires are obtained from the as‐prepared SnO₂ and high‐temperature annealed SnO₂ nanospheres, respectively. The unique Sn@C nanostructures can mitigate the agglomeration/pulverization of Sn nanoparticles and electrical disconnection from the current collector caused by the large volume change during the lithium alloying/dealloying process. Both Sn@C yolk–shell and core–sheath nanostructures show stable cycling performance up to 500 cycles with specific capacities of ca. 430 and 520 mA h g^?1, respectively.     

A study of formation process of NiFe2O4 and ZnFe2O4 prepared bij oxalate coprecipitation

MFe₂(C₂O₄)₃*6H₂O (M=Ni, Zn) powders were prepared by oxalate coprecipitation. Using Mössbauer spectroscopy, XRD, DTA and TEM, the thermal decomposition of MFe₂(C₂O₄)₃*6H₂O and the formation process of NiFe₂O₄ and ZnFe₂O₄ were investigated.     

Synthesis and characterization of TiO2-coated magnetite clusters (nFe3O4@TiO2) as anode materials for Li-ion batteries

TiO₂-coated magnetite clusters (nFe₃O₄@TiO₂) were facilely prepared through the sol–gel reaction between Ti alkoxides (TEOT) and magnetite clusters (nFe₃O₄) with terminated alkoxy groups. The composite particles represented a core–shell nanostructure (nFe₃O₄@TiO₂) consisting of a Fe₃O₄ cluster core and a TiO₂ capsule layer. The capsule layer of nFe₃O₄@TiO₂ was increased with increasing amounts of TEOT (150, 300, 500 μl) in sol–gel reaction. The Fe₃O₄@TiO₂ (150 μl of TEOT) with a thin TiO₂ layer (ca. 10 nm) exhibited two kinds of cathodic (0.79 V and 1.61 V) and anodic (1.78 and 2.1 V) peaks attributed to the reduction and oxidation process by Fe₃O₄ core and TiO₂ layer, respectively. The thin nFe₃O₄@TiO₂ (150 μl of TEOT) exhibited the enhanced capacity retention by ca. 40% probably due to the buffering effect of TiO₂ capsule layer. However, the thick nFe₃O₄@TiO₂ (300–500 μl of TEOT) exhibited a rapid capacity fading due to the disintegrated core–shell nanostructure, i.e., unfavorable hetero-junction between TiO₂ matrix and magnetite clusters.     

Optical and electronic properties of NiFe2O4 and CoFe2O4 thin films

We report the optical and electronic properties of the inverse spinel ferrite NiFe₂O₄ and CoFe₂O₄ thin films deposited on single crystal sapphire by electron beam deposition. We carried out variable temperature (78–500 K) transmittance measurements on the thin films to investigate the optical properties and electronic structures of these ferrites. The absorption spectra of both NiFe₂O₄ and CoFe₂O₄ thin films show insulating characters with Ni (Co) d to d on-site transitions below 3 eV. The energy bands above 3 eV are mainly due to the O 2p to Fe 3d charge transfer transitions. The observed electronic transitions have been assigned based on the first principles calculations and comparisons with structurally similar Ni and Co-containing compounds. The Co²⁺ d to d transition in the CoFe₂O₄ thin film shows a strong temperature dependence, likely due to the spin-charge coupling effect.     

Magnetic properties and local configurations of <Superscript>57</Superscript>Fe atoms in CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript> powders and CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/PVA nanocomposites

The composition and magnetic properties of the powders extracted from CoFe₂O₄ aqueous suspensions and the CoFe₂O₄/PVA (PVA is polyvinyl alcohol) nanocomposites with a cobalt ferrite content of 10–30 wt % have been investigated using Mössbauer spectroscopy, transmission electron microscopy, and vibration magnetometry. The cationic formulas of the cobalt ferrites synthesized have been determined. The differences between samples synthesized at temperatures of 72.5 and 82.5°C have been revealed. The specific features of the observed changes in the agglomeration of CoFe₂O₄ particles after introducing into the PVA matrix have been studied. It has been shown that the iron ion distribution determined by Mössbauer spectroscopy in octahedral and tetrahedral lattice sites correlates with vibration magnetometry data.     

Studies on polyethylene glycol coating on NiFe2O4 nanoparticles for biomedical applications

The NiFe₂O₄ nanoparticles were prepared by the combustion method and these nanoparticles were successfully coated with polyethylene glycol (PEG) for the possible biomedical applications such as magnetic resonance imaging, drug delivery, tissue repair, magnetic fluid hyperthermia etc. The structural and magnetic characterizations of NiFe₂O₄ nanoparticles were carried out by x-ray diffraction and vibrating sample magnetometry techniques, respectively. The morphology of the uncoated and coated nanoparticles was studied by scanning electron microscopy. The existence of PEG layer on NiFe₂O₄ nanoparticles was confirmed by fourier transform infrared spectroscopy technique.