Synthesis and characterization of organic/inorganic hybrid star polymers of 2,2,3,4,4,4‐hexafluorobutyl methacrylate and octa(aminophenyl)silsesquioxane nano‐cage made via atom transfer radical polymerization

Well‐defined organic/inorganic hybrid fluorinated star polymers were synthesized via atom transfer radical polymerization (ATRP) of 2,2,3,4,4,4‐hexafluorobutyl methacrylate (HFBMA) using octa(aminophenyl)silsesquioxane (OAPS) nano‐cage as initiator. For this purpose, OAPS was transformed into ATRP initiator by reacting with 2‐bromoisobutyrylbromide. ATR polymerization of HFBMA was carried out in trifluorotoluene at 75 °C using CuCl/2,2‐bipyridine or N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst system. GPC and ¹H NMR data confirmed the synthesis of OAPS/PHFBMA hybrid star polymer. Kinetics of the ATR polymerization of HFBMA using OAPS nano‐cage initiator was also investigated. The OAPS/PHFBMA hybrid stars were found to be molecularly dispersed in solution (THF); however, TEM micrographs revealed the formation of spherical particles of ～ 120–180 nm by the OAPS/PHFBMA hybrid star polymer after solvent evaporation. Thermal characterization of the nanocomposites by differential scanning calorimetry (DSC) revealed a slightly higher glass transition temperature (T_g) (when compared with the linear PHFBMA) of higher molecular weight OAPS/PHFBMA hybrid star polymers. In contrast, lower T_g than the linear PHFBMA was observed for OAPS/PHFBMA of relatively lower molecular weight (but higher than the linear PHFBMA). Thermal gravimetric analysis (TGA) showed a significant retardation (by ～60 °C) in thermal decomposition of nanocomposites when compared with the linear PHFBMA. Additionally, surface properties were evaluated by measuring the contact angles of water on polymer surfaces. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7287–7298, 2008     

ATRP of methyl methacrylate using a novel binol ester‐based bifunctional initiator

Novel bifunctional initiators [1,1′‐Bi‐2‐naphthol bis(2‐bromo‐2‐methylpropionate); (R)‐, (S)‐, and racemic‐] were synthesized from the esterification of 1,1′‐bi‐2‐naphthol and used as initiators in atom transfer radical polymerization (ATRP) in conjunction with N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA), and copper (I) bromide or copper (I) chloride. The initiators synthesized were completely characterized by UV, FTIR, NMR, and Mass spectroscopies. A detailed investigation of the ATRP of methyl methacrylate (MMA) with the bifunctional initiators (BBiBN) along with CuBr or CuCl/PMDETA catalyst system in anisole was carried out at 30 °C. Thus, MMA polymerization is shown to proceed with first‐order kinetics, with predicted molecular weight, and narrow polydispersity indices. The ATRP of glycidyl methacrylate (GMA) and tert‐butyl acrylate (tBA) were also performed with BBiBN initiator in conjunction with CuBr/PMDETA catalyst system. The polymerization of GMA was carried out at 30 °C, but tBA was polymerized at 60 °C. Gel permeation chromatography (GPC), FTIR, NMR, UV spectroscopies, and TGA were used for the characterization of the polymers synthesized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 902–915, 2004     

Synthesis of novel crosslinkable polymers by atom transfer radical polymerization of cardanyl acrylate

In this work, the successful application of atom transfer radical polymerization (ATRP) to cardanyl acrylate, a polymerizable monomer derived from a renewable resource cardanol, is reported. Polycardanyl acrylate and poly(methylmethacrylate)‐cardanyl acrylate copolymers were prepared in bulk ATRP, using Copper(I) bromide/N, N, N′, N′, N″‐pentamethyl diethylene triamine (PMDETA) catalyst system at 95 °C in combination with ethyl‐2‐bromo isobutyrate initiator. The copolymers had mol. wt. (M_n) in the range 8300–2400 g/mol and polydispersity index (PDI) 1.27–2.00, depending upon the [M]₀/[I]₀ ratio. ¹H NMR analysis of the copolymer showed that unsaturation in the side chain of cardanyl acrylate is unaffected under the conditions of ATRP. This was further confirmed by studying the curing reaction of polycardanyl acrylate by supported dynamic mechanical thermal analysis (DMTA) in dual cantilever mode. The thermogravimetric analysis shows that the copolymers have improved thermal stability, by about 35 °C, in comparison with pure PMMA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5953–5961, 2005     

Preparation of carboxyl‐end‐group polyacrylamide with low polydispersity by ATRP initiated with chloroacetic acid

Atom transfer radical polymerization (ATRP) of acrylamide was successfully carried out with chloroacetic acid as initiator and CuCl/N,N,N′,N′‐tetramethylethylenediamine (TMEDA) as catalyst either in water at 80 °C or in glycerol–water (1:1 v/v) medium at 130 °C. In both cases, carboxyl‐end‐group polyacrylamide was obtained with lower polydispersity ranging from 1.03 to 1.44 depending on the polymerization condition. Polymerization kinetics showed that the polymerizations proceeded with a living/controlled nature and accelerated at a higher temperature. The effect of pH in the reaction system on the polymerizations was further studied, revealing that chloroacetic acid not only served as a functional initiator for the ATRP of acrylamde but also provided the acidic polymerization condition, which effectively protected the ATRP of acrylamide from the unexpected complexation and cyclization side‐reactions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3956–3965, 2007     

Atom transfer radical copolymerization of acrylonitrile and ethyl methacrylate at ambient temperature

Copolymerization of acrylonitrile (AN) and ethyl methacrylate (EMA) using copper‐based atom transfer radical polymerization (ATRP) at ambient temperature (30 °C) using various initiators has been investigated with the aim of achieving control over molecular weight distribution. The effect of variation of concentration of the initiator, ligand, catalyst, and temperature on the molecular weight distribution and kinetics were investigated. No polymerization at ambient temperature was observed with N,N,N′,N′,N″‐pentamethyldiethylenetriamine (PMDETA) ligand. The rate of polymerization exhibited 0.86 order dependence with respect to 2‐bromopropionitrile (BPN) initiator. The first‐order kinetics was observed using BPN as initiator, while curvature in first‐order kinetic plot was obtained for ethyl 2‐bromoisobutyrate (EBiB) and methyl 2‐bromopropionate (MBP), indicating that termination was taking place. Successful polymerization was also achieved with catalyst concentrations of 25 and 10% relative to initiator without loss of control over polymerization. The optimum [bpy]₀/[CuBr]₀ molar ratio for the copolymerization of AN and EMA through ATRP was found to be 3/1. For three different in‐feed ratios, the variation of copolymer composition (F_AN) with conversion indicated toward the synthesis of copolymers having slight changes in composition with conversion. The high chain‐end functionality of the synthesized AN‐EMA copolymers was verified by further chain extension with methyl acrylate and styrene. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1975–1984, 2006     

Atom transfer radical polymerization of 6‐O‐methacryloyl‐1,2;3,4‐di‐O‐isopropylidene‐D‐galactopyranose in solution

A detailed exploration of the atom transfer radical polymerization (ATRP) of a sugar‐carrying monomer, 6‐O‐methacryloyl‐1,2;3,4‐di‐O‐isopropylidene‐D‐galactopyranose (MAIPGal) was performed. The factors pertinent to ATRP, such as initiators, ligands, catalysts, and temperature were optimized to obtain good control over the polymerization. The kinetics were examined in detail when the polymerization was initiated by methyl 2‐bromoisopropionate (2‐MBP), ethyl 2‐bromoisobutyrate (2‐EBiB), or a macroinitiator, [α‐(2‐bromoisobutyrylate)‐ω‐methyl PEO] (PEO–Br), with bipyridine (bipy) as the ligand at 60 °C or by 2‐EiBB with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the ligand at room temperature (23 °C). The effects of the catalysts (CuBr and CuCl) were also investigated. We demonstrate that the successful ATRP of MAIPGal can be achieved for 2‐EBiB/CuBr/bipy and 2‐MBP/CuCl/bipy at 60 °C and for 2‐EBiB/CuBr/PMDETA at room temperature. The initiation by 2‐EBiB at room temperature with PMDETA as the ligand should be the most optimum operation for its moderate condition and suppression of many side reactions. Chain extension of P(MAIPGal) prepared by ATRP with methyl methacrylate (MMA) as the second monomer was carried out and a diblock copolymer, P(MAIPGal)‐b‐PMMA, was obtained. Functional polymers, poly(D‐galactose 6‐methacrylate) (PGMA), PEO‐b‐PGMA, and PGMA‐b‐PMMA were obtained after removal of the protecting groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 752–762, 2005     

Living free‐radical polymerization of sterically hindered monomers: Improving the understanding of 1,1‐disubstituted monomer systems

The sterically hindered, 1,1‐disubstituted monomers di‐n‐butyl itaconate (DBI), dicyclohexyl itaconate (DCHI), and dimethyl itaconate (DMI) were polymerized with reversible addition–fragmentation chain transfer (RAFT) free‐radical polymerization and atom transfer radical polymerization (ATRP). Cumyl dithiobenzoate, cumyl phenyl dithioacetate, 2‐cyanoprop‐2‐yl dithiobenzoate, 4‐cyanopentanoic acid dithiobenzoate, and S‐methoxycarbonylphenylmethyl dithiobenzoate were employed as RAFT agents to mediate a series of polymerizations at 60 °C yielding polymers ranging in their number‐average molecular weight from 4500 to 60,000 g mol^?1. The RAFT polymerizations of these hindered monomers displayed hybrid living behavior (between conventional and living free‐radical polymerization) of various degrees depending on the molecular structure of the initial RAFT agent. In addition, DCHI was polymerized via ATRP with a CuCl/methyl benzoate/N,N,N′,N″,N″‐pentamethyldiethylenetriamine/cyclohexanone system at 60 °C. Both the ATRP and RAFT polymerization of the hindered monomers displayed living characteristics; however, broader than expected molecular weight distributions were observed for the RAFT systems (polydispersity index = 1.15–3.35). To assess the cause of this broadness, chain‐transfer‐to‐monomer constants for DMI, DBI, and DCHI were determined (1.4 × 10^?3, 1.3 × 10^?3, and 1.0 × 10^?3, respectively) at 60 °C. Simulations carried out with the PREDICI program package suggested that chain transfer to monomer contributed to the broadening process. In addition, the experimental results indicated that viscosity had a pronounced effect on the broadness of the molecular weight distributions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3692–3710, 2006     

Synthesis of poly(methyl methacrylate) via ARGET ATRP and study of the effect of solvents and temperatures on its polymerization kinetics

This investigation reports the synthesis of poly(methyl methacrylate) via activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and studies the effect of solvents and temperature on its polymerization kinetics. ARGET ATRP of methyl methacrylate (MMA) was carried out in different solvents and at different temperatures using CuBr₂ as catalyst in combination with N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a ligand. Methyl 2‐chloro propionate was used as ATRP initiator and ascorbic acid was used as a reducing agent in the ARGET ATRP of MMA. The conversion was measured gravimetrically. The semilogarithmic plot of monomer conversion versus time was found to be linear, indicating that the polymerization follows first‐order kinetics. The linear polymerization kinetic plot also indicates the controlled nature of the polymerization. N,N‐Dimethylformamide (DMF), tetrahydrofuran (THF), toluene, and methyl ethyl ketone were used as solvents to study the effect on the polymerization kinetics. The effect of temperature on the kinetics of the polymerization was also studied at various temperatures. It has been observed that polymerization followed first‐order kinetics in every case. The rate of polymerization was found to be highest (k_app = 6.94 × 10⁻³ min⁻¹) at a fixed temperature when DMF was used as solvent. Activation energies for ARGET ATRP of MMA were also calculated using the Arrhenius equation.     

Effect of phenol and derivatives on atom transfer radical polymerization in the presence of air

The various phenolic compounds in conjunction with Cu(II) or Cu(I)‐N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) complexes are used to initiate atom transfer radical polymerization (ATRP) of methyl methacrylate, styrene, and methyl acrylate in the presence of a limited amount of air at temperatures in the range of 80–110 °C. Meanwhile, an effort is directed toward the elucidation of the role of phenol and derivatives in ATRP catalyzed by Cu(II)/PMDETA. The catalytic sequence involves the formation of Cu(I) by electron transfer from phenol to Cu(II); Cu(I) so formed can then react in two distinctly different ways: with organic halide to form a propagating radical or with oxygen to form copper salt in its higher oxidation state; and regeneration of Cu(I) by excess phenol. Such regeneration of Cu(I) would be expected to lead to polymerization as a result of the consumption of oxygen and phenol as well. The phenols with electron releasing groups tended to increase the conversion of the polymerization. In this respect, sodium phenoxide, a more effective additive was found, whereas p‐nitro phenol was the least effective. The obtained polymers displayed the common features of a controlled polymerization such as molecular weight control and low polydispersity index value (M_w/M_n < 1.5). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 351–359, 2004     

Elaboration of well‐defined Rasta resins and their use as supported catalytic systems for atom transfer radical polymerization

New supported catalytic systems based on the immobilization of a ligand onto supported (co)polymers were prepared, allowing copper immobilization onto a solid support during the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA). These supported catalysts were elaborated by the ATRP of 2‐vinyl‐4,4‐dimethyl‐5‐oxazolone and/or styrene onto a Wang resin initiator. Two different approaches were used, involving well‐defined architectures synthesized by ATRP. First, a supported electrophilic homopolymer [Wang‐g‐poly(2‐vinyl‐4,4‐dimethyl‐5‐oxazolone)] was synthesized to obtain an azlactone ring at each repetitive unit, and a supported statistical copolymer [Wang‐g‐poly(2‐vinyl‐4,4‐dimethyl‐5‐oxazolone‐stat‐styrene)] was synthesized to introduce a distance between the azlactone rings. The azlactone‐based (co)polymers were then modified by a reaction with N,N,N′,N′‐tetraethyldiethylenetriamine (TEDETA) to create supported complexing sites for copper bromide. The ATRP of MMA was studied with these supported ligands, and a first‐order kinetic plot was obtained, but high polydispersity indices of the obtained poly(methyl methacrylate) were observed (polydispersity index > 2). On the other hand, the supported ATRP of styrene was performed, followed by the nucleophilic substitution of bromine by TEDETA (Wang‐g‐polystyrene–N,N,N′,N′‐tetraethyldiethylenetriamine) at the chain end of the grafted polystyrene chains. This strategy led the ligand away from the core bead, depending on the length of the polystyrene block (number‐average molecular weight determined by size exclusion chromatography = 1100–2250 g/mol). These supported complexes mediated a controlled polymerization of MMA, yielding polymers with controlled molar masses and low polydispersity indices. Moreover, after the polymerization, 96% of the initial copper was kept in the beads. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5316–5328, 2006     

Synthesis of well‐defined amphiphilic graft copolymer bearing poly(2‐acryloyloxyethyl ferrocenecarboxylate) side chains via successive SET‐LRP and ATRP

A series of well‐defined ferrocene‐based amphiphilic graft copolymers, consisting of poly(N‐isopropylacrylamide)‐b‐poly(ethyl acrylate) (PNIPAM‐b‐PEA) backbone and poly(2‐acryloyloxyethyl ferrocenecarboxylate) (PAEFC) side chains, were synthesized by the combination of single‐electron‐transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). A new ferrocene‐based monomer, 2‐(acryloyloxy)ethyl ferrocenecarboxylate (AEFC), was prepared first and it can be polymerized via ATRP in a controlled way using methyl 2‐bromopropionate as initiator and CuBr/PMDETA as catalytic system in DMF at 40 °C. PNIPAM‐b‐PEA backbone was synthesized by sequential SET‐LRP of NIPAM and HEA at 25 °C using CuCl/Me₆TREN as catalytic system followed by the transformation into the macroinitiator by treating the pendant hydroxyls with α‐bromoisobutyryl bromide. The targeted well‐defined graft copolymers with narrow molecular weight distributions (M_w/M_n < 1.20) were synthesized via ATRP of AEFC initiated by the macroinitiator. The electro‐chemical behaviors of PAEFC homopolymer and PNIPAM‐b‐(PEA‐g‐PAEFC) graft copolymer were studied by cyclic voltammetry. Micellar properties of PNIPAM‐b‐(PEA‐g‐PAEFC) were investigated by transmission electron microscopy and dynamic light scattering. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4346–4357, 2009     

Ambient‐temperature copper‐catalyzed atom transfer radical polymerization of methacrylates in ethylene glycol solvents

The use of ethylene glycol solvents in the room‐temperature atom transfer radical polymerization (ATRP) of various hydrophobic and hydrophilic methacrylates is demonstrated. Unlike many of the very polar solvents described in the literature for room‐temperature ATRP, these solvents have good solvency for a wide range of polymers and monomers and are cheap and relatively nontoxic. Ethylene glycols with one hydroxyl and one methoxy group, such as tri(ethylene glycol) monomethyl ether (TEGMME), provide optimal results. The polymerization of methyl methacrylate in TEGMME with CuBr/N,N,N′N′,N″‐pentamethyldiethylenetriamine as the catalyst requires the addition of CuCl₂ at the beginning of the reaction to produce well‐controlled polymerizations. This leads to polymers with predictable molecular weights and relatively narrow polydispersities. Polymerization in solvents that are fully methoxy‐capped terminate prematurely because of catalyst precipitation. The electrochemical behavior of copper complexes in selected solvents is examined to determine why these solvents provide good rates at room temperature. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1588–1598, 2005     

Reverse atom transfer radical polymerization of methyl methacrylate initiated by p‐chlorobenzenediazonium tetrafluoroborate

The controlled polymerization of methyl methacrylate (MMA) in bulk was initiated with p‐chlorobenzenediazonium tetrafluoroborate ( 1 ) and Cu(II) or Cu(I)/Cu(II)/N,N,N′,N″,N″‐pentamethyldietylene triamine (PMDETA) complex system at various temperatures (20, 60, and 90 °C). The proposed polymerization mechanism is based on the Meerwein‐type arylation reaction followed by a reverse atom transfer radical polymerization. In this mechanism, aryl radicals formed by the reaction with 1 and Cu(I) and/or PMDETA initiated the polymerization of MMA. The polymerization is controlled up to a molecular weight of 46,000 at 90 °C. Chain extension was carried out to confirm the controlled manner of the polymerization system. In all polymerization systems, the polydispersity index and initiator efficiency ranged from 1.10–1.57 to 0.10–0.21, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2019–2025, 2003     

Microstructure determination of methyl methacrylate and n‐butyl acrylate copolymers synthesized by atom transfer radical polymerization with two‐dimensional NMR spectroscopy

Copolymers of methyl methacrylate (MMA) and n‐butyl acrylate (n‐BA) were synthesized under atom transfer radical polymerization (ATRP) conditions. The molar infeed ratio was varied to obtain copolymers with different compositions. Methyl 2‐bromo propionate was used as the initiator with CuBr/Cu(0)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalyst at 60 °C. Molecular weight distribution was determined by gel permeation chromatography (GPC). Copolymer compositions (F_M) were calculated from ¹H NMR spectra. Reactivity ratios calculated with the Mao–Huglin terminal model at a high conversion were found to be r_M = 2.17 and r_B = 0.47. The polymerization mechanism was studied with the α‐methyl region of MMA. The backbone methylene and carbonyl carbons of both MMA and n‐BA units were found to be compositionally as well as configurationally sensitive. Complete spectral assignments were performed with the help of heteronuclear single quantum coherence (HSQC) spectroscopy along with total correlated spectroscopy (TOCSY). Further, the assignments of the carbonyl region were made with the help of heteronuclear multiple quantum coherence (HMBC) spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1100–1118, 2005     

ATRP of butyl acrylates from functionalized carbon black surfaces

The functionalization of carbon black surface with atom transfer radical polymerization (ATRP) initiating sites and subsequent ATRP of n‐butyl acrylate (n‐BA) and t‐butyl acrylate (t‐BA) from the surface of carbon black is reported. The polymerizations were carried out using CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the primary catalytic system in anisole at 70 °C. The initiator density on carbon black surface was tuned and the effect of initiator density on the polymers grafted on the surface was illustrated. Polymerizations were also performed in the presence of a sacrificial initiator to indirectly monitor the molecular weight evolution of polymers formed in the system. Block copolymerization of t‐BA initiated from poly(n‐BA) grafted carbon black was conducted to achieve water‐dispersible carbon black composites after cleavage of the t‐butyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4695–4709, 2005     

Controlled grafting of ethyl cellulose with azobenzene‐containing polymethacrylates via atom transfer radical polymerization

Graft copolymers of ethyl cellulose with azobenzene‐containing polymethacrylates were synthesized through atom transfer radical polymerization (ATRP). The residual hydroxyl groups on ethyl cellulose were first esterified with 2‐bromoisobutyryl bromide to yield 2‐bromoisobutyryloxy groups, which was then used to initiate the polymerization of 6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl methacrylate (MMAzo) in the presence of CuBr/N,N,N′,N″,N″‐pentamethylenetriamine (PMDETA) as catalyst and anisole as solvent. The graft copolymers were characterized by gel permeation chromatography (GPC) and ¹H‐NMR. The molecular weights of the graft copolymers increased relatively to the macroinitiator, and the polydispersities were narrow. The thermal and liquid crystalline property of the graft copolymers were investigated by differential scanning calorimeter (DSC) and polarizing optical microscope (POM). Photoresponsive property was studied under the irradiation of UV–vis light in THF solution. The graft copolymers have potential applications, including sensors and optical materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1653–1660, 2007     

Synthesis of amphiphilic A3B mikto‐arm copolymers from a sugar core: Combination of hydrophobic PCL and hydrophilic glycopolymers for biocompatible nanovector preparation

Amphiphilic A₃B mikto‐arm copolymers have been synthesized using a t‐butyl‐diphenyl silyl‐based methylglucoside derivative. The latter has been first used as initiator for the polymerization of ε‐caprolactone leading to three‐arm star‐shaped structures followed by several postpolymerization steps to obtain star‐shaped poly(ε‐caprolactone) macroinitiator. Atom transfer radical polymerization (ATRP) of diisopropylidene galactose methacrylate in THF at 60 °C using CuBr ligated with 1,1,4,7,10,10‐hexamethyltriethylenetetramine (HMTETA) as catalytic complex allowed the formation of A₃B mikto‐arm copolymers with different compositions and molecular weights. Selective deprotection of sugar protecting groups finally generated amphiphilic mikto‐arm copolymers. The molecular characterization of those copolymers was performed by ¹H NMR spectroscopy and gel permeation chromatography (GPC) analysis. The self‐assembly of the copolymers into micellar aggregates and the related critical micellization concentration (CMC) in aqueous media were determined by dynamic light scattering (DLS) and UV‐visible spectroscopy, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3271–3280, 2010     

Synthesis of poly(2‐ethylhexyl acrylate)/clay nanocomposite by in situ living radical polymerization

This investigation reports the preparation of tailor‐made poly(2‐ethylhexyl acrylate) (PEHA) prepared via in situ living radical polymerization in the presence of layered silicates and characterization of this polymer/clay nanocomposite. Being a low T_g (?65 °C) material, PEHA has very good film formation property for which it is used in paints, adhesives, and coating applications. 2‐Ethylhexyl acrylate was polymerized at 90 °C using CuBr and Cu(0) as catalyst in combination with N,N,N′,N″,N″‐pentamethyl diethylenetriamine (PMDETA) as ligand. A tremendous enhancement in reaction rate and polymerization data was achieved when acetone was added as additive to increase the efficiency of the catalyst system. PEHA/clay nanocomposite was prepared at 90 °C using CuBr as catalyst in combination with PMDETA as ligand. Different types of clay with same loading were also used to study the effect on reaction rate. The molecular weight (M_n) and polydispersity index of the prepared nanocomposites were characterized by size exclusion chromatography. The active end group of the polymer chain was analyzed by ¹H NMR analysis and by chain extension experiment. Polymer/clay interaction was studied by Fourier Transform Infrared spectrometry and wide‐angle X‐ray diffraction analyses. Distribution of clay in the polymer matrix was studied by the transmission electron microscopy. Thermogravimetric analysis showed that thermal stability of PEHA/clay nanocomposite increases on addition of nanoclay. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Surface modification of polystyrene latex particles via atom transfer radical polymerization

The atom transfer radical polymerization (ATRP) technique using the copper halide/ N,N′,N′,N″,N″‐pentamethyldiethylenetriamine complex was applied to the graft polymerization of methyl methacrylate and methyl acrylate on the uniform polystyrene (PS) seed particles and formed novel core‐shell particles. The core was submicron crosslinked PS particles that were prepared via emulsifier‐free emulsion polymerization. The crosslinked PS particles obtained were transferred into the organic phase (tetrahydrofuran), and surface modification using the chloromethylation method was performed. Then, the modified seed PS particles were used to initiate ATRP to prepare a controlled poly(methyl methacrylate) (PMMA) and poly(methyl acrylate) (PMA) shell. The final core‐shell particles were characterized using Fourier transform infrared spectroscopy, nuclear magnetic resonance, scanning electron microscopy, thermogravimetric analysis, and elementary analysis. The grafting polymerization was conducted successfully on the surface of modified crosslinked PS particles, and the shell thickness and weight ratio (PMMA and PMA) of the particles were calculated. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 892–900, 2002; DOI 10.1002/pola.10160     

A novel fluorine‐containing graft copolymer bearing perfluorocyclobutyl aryl ether‐based backbone and poly(methyl methacrylate) side chains

A series of novel graft copolymers consisting of perfluorocyclobutyl aryl ether‐based backbone and poly(methyl methacrylate) side chains were synthesized by the combination of thermal [2π + 2π] step‐growth cycloaddition polymerization of aryl bistrifluorovinyl ether monomer and atom transfer radical polymerization (ATRP) of methyl methacrylate. A new aryl bistrifluorovinyl ether monomer, 2‐methyl‐1,4‐bistrifluorovinyloxybenzene, was first synthesized in two steps from commercially available reagents, and this monomer was homopolymerized in diphenyl ether to provide the corresponding perfluorocyclobutyl aryl ether‐based homopolymer with methoxyl end groups. The fluoropolymer was then converted to ATRP macroinitiator by the monobromination of the pendant methyls with N‐bromosuccinimide and benzoyl peroxide. The grafting‐from strategy was finally used to obtain the novel poly(2‐methyl‐1,4‐bistrifluorovinyloxybenzene)‐g‐poly(methyl methacrylate) graft copolymers with relatively narrow molecular weight distributions (M_w/M_n ≤ 1.46) via ATRP of methyl methacrylate at 50 °C in anisole initiated by the Br‐containing macroinitiator using CuBr/dHbpy as catalytic system. These fluorine‐containing graft copolymers can dissolve in most organic solvents. This is the first example of the graft copolymer possessing perfluorocyclobutyl aryl ether‐based backbone. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010