A facile method for the fabrication of well‐dispersed mesoporous Pt nanospheres involves the use of a polymeric micelle assembly. A core–shell–corona type triblock copolymer [poly(styrene‐b‐2‐vinylpyridine‐b‐ethylene oxide), PS‐b‐P2VP‐b‐PEO] is employed as the pore‐directing agent. Negatively charged PtCl42? ions preferably interact with the protonated P2VP+ blocks while the free PEO chains prevent the aggregation of the Pt nanospheres. The size of the mesopores can be finely tuned by varying the length of the PS chain. Furthermore, it is demonstrated that the metallic mesoporous nanospheres thus obtained are promising candidates for applications in electrochemistry. 相似文献
Silver nanoparticles (Ag NPs) of improved thermal stability against long‐term aggregation were prepared using the polystyrene‐b‐poly(4‐vinylpyridine)‐b‐polystyrene (PS‐b‐P4VP‐b‐PS) triblock copolymer as a multidentate ligand. First, PS‐b‐P4VP‐b‐PS was synthesized by sequential reversible addition–fragmentation transfer (RAFT) polymerization of styrene and 4‐vinylpydine using a trithiocarbonate chain transfer agent (CTA). Then Ag NPs were obtained by in situ reduction of silver nitrate using PS‐b‐P4VP‐b‐PS as a multidentate ligand. The obtained Ag NPs were stable in solution for at least 24 h while being heated at 110°C. The effect of the molar ratio of N atoms of the P4VP chain segment and AgNO3 on the stability of Ag NPs was studied, and the results suggested that Ag NPs were very stable even if the molar ratio of N atoms of the P4VP chain segment and AgNO3 was very low. This method is promising to scale up the preparation of metal NPs with good dispersibility and thermal stability, which still remains challenging. To further improve its thermal stability, 1,4‐dibromobutane was used to chemically crosslink the P4VP chain segment in solution. However, the results proved that the crosslink method is infeasible to further improve the thermal stability of Ag NPs in this system. 相似文献
With the aim of accessing colloidally stable, fiberlike, π‐conjugated nanostructures of controlled length, we have studied the solution self‐assembly of two asymmetric crystalline–coil, regioregular poly(3‐hexylthiophene)‐b‐poly(2‐vinylpyridine) (P3HT‐b‐P2VP) diblock copolymers, P3HT23‐b‐P2VP115 (block ratio=1:5) and P3HT44‐b‐P2VP115 (block ratio=ca. 1:3). The self‐assembly studies were performed under a variety of solvent conditions that were selective for the P2VP block. The block copolymers were prepared by using Cu‐catalyzed azide–alkyne cycloaddition reactions of azide‐terminated P2VP and alkyne end‐functionalized P3HT homopolymers. When the block copolymers were self‐assembled in a solution of a 50 % (v/v) mixture of THF (a good solvent for both blocks) and an alcohol (a selective solvent for the P2VP block) by means of the slow evaporation of the common solvent; fiberlike micelles with a P3HT core and a P2VP corona were observed by transmission electron microscopy (TEM). The average lengths of the micelles were found to increase as the length of the hydrocarbon chain increased in the P2VP‐selective alcoholic solvent (MeOH<iPrOH<nBuOH). Very long (>3 μm) fiberlike micelles were prepared by the dialysis of solutions of the block copolymers in THF against iPrOH. Furthermore the widths of the fibers were dependent on the degree of polymerization of the chain‐extended P3HT blocks. The crystallinity and π‐conjugated nature of the P3HT core in the fiberlike micelles was confirmed by a combination of UV/Vis spectroscopy, photoluminescence (PL) measurements, and wide‐angle X‐ray scattering (WAXS). Intense sonication (iPrOH, 1 h, 0 °C) of the fiberlike micelles formed by P3HT23‐b‐P2VP115 resulted in small (ca. 25 nm long) stublike fragments that were subsequently used as initiators in seeded growth experiments. Addition of P3HT23‐b‐P2VP115 unimers to the seeds allowed the preparation of fiberlike micelles with narrow length distributions (Lw/Ln <1.11) and lengths from about 100‐300 nm, that were dependent on the unimer‐to‐seed micelle ratio. 相似文献
Linear poly(4‐tert‐butoxystyrene)‐b‐poly(4‐vinylpyridine) (PtBOS‐b‐P4VP) diblock copolymers are synthesized using reversible addition–fragmentation chain transfer polymerization. The self‐assembly of four different PtBOS‐b‐P4VP diblock copolymers is studied using small‐angle X‐ray scattering and transmission electron microscopy and a number of interesting observations are made. A tBOS62‐b‐4VP28 diblock copolymer with a weight fraction P4VP of 0.21 shows a disordered morphology of P4VP spheres with liquid‐like short‐range order despite an estimated value of of the order of 50. Increasing the length of the 4VP block to tBOS62‐b‐4VP199 results in a diblock copolymer with a weight fraction P4VP of 0.66. It forms a remarkably well‐ordered lamellar structure. Likewise, a tBOS146‐b‐4VP120 diblock copolymer with a weight fraction P4VP of 0.33 forms an extremely well‐ordered hexagonal structure of P4VP cylinders. Increasing the P4VP block of this block copolymer to tBOS146‐b‐4VP190 with a weight fraction P4VP of 0.44 results in a bicontinuous gyroid morphology despite the estimated strong segregation of . These results are discussed in terms of the architectural dissimilarity of the two monomers, characterized by the presence of the large side group of PtBOS, and the previously reported value of the interaction parameter, , for this polymer pair.
Fiber‐like π‐conjugated nanostructures are important components of flexible organic electronic and optoelectronic devices. To broaden the range of potential applications, one needs to control not only the length of these nanostructures, but the introduction of diverse functionality with spatially selective control. Here we report the synthesis of a crystalline‐coil block copolymer of oligo(p‐phenylenevinylene)‐b‐poly(2‐vinylpyridine) (OPV5‐b‐P2VP44), in which the basicity and coordinating/chelating ability of the P2VP segment provide a landscape for the incorporation of a variety of functional inorganic NPs. Through a self‐seeding strategy, we were able to prepare monodisperse fiber‐like micelles of OPV5‐b‐P2VP44 with lengths ranging from 50 to 800 nm. Significantly, the exposed two ends of OPV core of these fiber‐like micelles remained active toward further epitaxial deposition of OPV5‐b‐PNIPAM49 and OPV5‐b‐P2VP44 to generate uniform A‐B‐A and B‐A‐B‐A‐B segmented block comicelles with tunable lengths for each block. The P2VP domains in these (co‐)micelles can be selectively decorated with inorganic and polymeric nanoparticles as well as metal oxide coatings, to afford hybrid fiber‐like nanostructures. This work provides a versatile strategy toward the fabrication of narrow length dispersity continuous and segmented π‐conjugated OPV‐containing fiber‐like micelles with the capacity to be decorated in a spatially selective way with varying functionalities. 相似文献
Highly porous polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) diblock copolymer membranes are prepared using carbohydrates as additives. Therefore α‐cyclodextrine, α‐(D )‐glucose, and saccharose (cane sugar) are tested for the membrane formation of three different PS‐b‐P4VP polymers. The addition of the carbohydrates leads to an increasing viscosity of the membrane solutions due to hydrogen bonding between hydroxyl groups of the carbohydrates and pyridine units of the block copolymer. In all cases, the membranes made from solution with carbohydrates have higher porosity, an improved narrow pore distribution on the surface and a higher water flux as membranes made without carbohydrates with the same polymer, solvent ratio, and polymer concentration. 相似文献
We herein report a new facile strategy to ellipsoidal block copolymer nanoparticles that exhibit a pH‐triggered anistropic swelling profile. In a first step, elongated particles with an axially stacked lamellae structure are selectively prepared by utilizing functional surfactants to control the phase separation of symmetric polystyrene‐b‐poly(2‐vinylpyridine) (PS‐b‐P2VP) in dispersed droplets. In a second step, the dynamic shape change is realized by cross‐linking the P2VP domains, thereby connecting glassy PS discs with pH‐sensitive hydrogel actuators. 相似文献
We herein report a new facile strategy to ellipsoidal block copolymer nanoparticles that exhibit a pH‐triggered anistropic swelling profile. In a first step, elongated particles with an axially stacked lamellae structure are selectively prepared by utilizing functional surfactants to control the phase separation of symmetric polystyrene‐b‐poly(2‐vinylpyridine) (PS‐b‐P2VP) in dispersed droplets. In a second step, the dynamic shape change is realized by cross‐linking the P2VP domains, thereby connecting glassy PS discs with pH‐sensitive hydrogel actuators. 相似文献
Low‐molecular weight amphiphilic diblock copolymers, polystyrene‐block‐poly (2‐vinylpyridine) (PS‐b‐P2VP), and (P2VP‐b‐PS) with different block ratios were synthesized for the first time via organotellurium‐mediated living radical polymerization (TERP). For both the homo‐ and block copolymerizations, good agreement between the theoretical, and experimental molecular weights was found with nearly 100% yield in every case. The molecular weight distribution for all the samples ranged between 1.10 and 1.24, which is well below the theoretical lower limit of 1.50 for a conventional free radical polymerization. Furthermore, a very simple approach to producing highly dense arrays of titania nanoparticles (TiO2) is presented using a site‐selective reaction of titanium tetraisopropoxide within the P2VP domains of micellar film of P2VP‐b‐PS in toluene through the sol–gel method.
Summary: A polymeric supramolecule consisting of symmetric polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP), dodecylbenzenesulfonic acid (DBSA), and 3‐pentadecylphenol (PDP) was formed by proton transfer and hydrogen bonding. The surface morphology of a thin film of the polymeric supramolecule has been investigated. The spherical PS microdomains embedded in a P4VP(DBSA)1.0(PDP)1.0 matrix are observed for the as‐cast film because the weight fraction, fcomb, of the P4VP(DBSA)1.0(PDP)1.0 blocks is much higher than that of PS as a result of the non‐covalent interactions of P4VP and DBSA and DBSA and PDP. Upon annealing the PS‐b‐P4VP(1:1)(DBSA)1.0(PDP)1.0 film at high temperatures, the hydrogen bonding between the DBSA and PDP diminishes, which leads to a change of overall morphology from an ordered sphere to a pitted structure.
AFM topographic image of a PS‐b‐P4VP(1:1)(DBSA)1.0(PDP)1.0 thin film. 相似文献