Polymerization of the new double‐charged monomer bis‐1,3(N,N,N‐trimethylammonium dicyanamide)‐2‐propylmethacrylate and ionic conductivity of the novel polyelectrolytes

The achievement of high ionic conductivity in single‐ion conducting polymer electrolytes is one of the important aims for various electrochemical devices including modern lithium batteries. One way to enhance the ionic conductivity in polyelectrolyte systems is to increase the quantity of charge carriers in each monomer unit. Highly charged poly(bis‐1,3(N,N,N‐trimethylammonium)‐2‐propylmethacrylate) with one of the most conducting anions, namely dicyanamide, was prepared via free radical bulk polymerization or using ionic liquids as reaction medium. The cationic polymers of the double‐charged monomer have molar masses up to = 1,830,000 g/mol and the ionic conductivity equal to 5.51 × 10^?5 S / cm at 25°C. The film forming ability, crystallinity, thermal stability, and glass transition temperatures of the new polymeric ionic liquids obtained from detailed studies are presented. Copyright © 2009 John Wiley & Sons, Ltd.     

Ruthenium‐incorporated,metathesis‐active polyacetylene

Two olefin metathesis methods have been developed for the preparation of metal‐incorporated polyacetylene (MIPA) with high levels of covalently attached ruthenium complex. Treatment of freshly prepared, porous polyacetylene (PA) formed by polymerization of acetylene by the metathesis catalyst (H₂IMes)RuCl₂(?CHPh)(3‐bromopyridine)₂ ( G2B ) with additional G2B resulted in the incorporation of the ruthenium complex into the solid polymer in levels up to 75% by mass, giving two‐step MIPA (MIPA2). Alternatively, single‐step MIPA (MIPA1) samples with similar levels (up to 79% by mass) of ruthenium incorporation were obtained by polymerization of acetylene with highly concentrated solutions of G2B , and the resulting materials formed fine suspensions in CH₂Cl₂. A variety of experiments confirmed that both the methods give materials with ruthenium covalently attached to PA chains. Shiny, tough MIPA films were obtained by pressing the black powders obtained by either method. Some MIPA properties were dependent on the amount of metal incorporation, but even samples with high incorporation levels mimicked untreated PA in many respects. MIPA1, but not MIPA2, was made electrically conductive by doping with iodine. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1061–1072, 2009     

Electrochemical synthesis of PEDOT derivatives bearing imidazolium‐ionic liquid moieties

Novel poly(3,4‐ethylenedioxythiophene) (PEDOT) polymers bearing imidazolium‐ionic liquid moieties were synthesized by electrochemical polymerizations. For this purpose, new functional monomers were synthesized having an 3,4‐ethylenedioxythiophene (EDOT) unit and an imidazolium‐ionic liquid with different anions such as tetrafluoroborate (BF), bis(trifluoromethane)sulfonimide ((CF₃SO₂)₂N^?), and hexafluorophosphate (PF). Next, polymer films were obtained by electrochemical synthesis in dicholoromethane solutions. Obtained polymers were characterized, revealing the characteristics of PEDOT in terms of electrochemical and spectroelectrochemical properties, FTIR, ¹H NMR, and AFM microscopy. Interestingly, the hydrophobic character of electropolymerized films could be modified depending on the anion type. The hydrophobicity followed the trend PF > (CF₃SO₂)₂N^? > BF > pure PEDOT as determined by water contact angle measurements. Furthermore, the polymers could be dissolved in a range of polar organic solvents such as dimethylformamide, propylene carbonate, and dimethyl sulfoxide making these polymers interesting candidates for wet processing methods. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3010–3021, 2009     

The influence of ionic liquid's nature on free radical polymerization of vinyl monomers and ionic conductivity of the obtained polymeric materials

Various 1,3‐dialkylimidazolium and tetraalkylphosphonium ionic liquids (ILs), including novel ones, have been studied as reaction media for free radical polymerization of methyl methacrylate (MMA), acrylonitrile (AN) and 1‐vinyl‐3‐ethylimidazolium salts (ViEtIm⁺)Y^?. The influence of IL's nature upon the polymer formulation was investigated. The use of different ionic liquids allows not only to obtain the polymers with high molecular weight (PMMA, up to 5,770,000 g/mol; PAN, up to 735,000 g/mol and poly[(ViEtIm⁺)Y^?], up to 1,130,000 g/mol) in high yields, but also to control the polymerization rate and molecular mass. The physicochemical characteristics, including mechanical properties, thermal stability and heat‐resistance of the obtained polymers were studied in order to compare with those of polymers prepared in a traditional media. It was found that elongation, tensile modulus and strength of PAN, which was synthesized in ionic liquid, are reliatively higher. The influence of IL's nature upon their ionic conductivity and the formation of conductive polymers from molten‐salt‐type vinyl monomers was investigated. Molecular design of the polymers simultaneously with the influence of IL's nature in order to achieve higher ionic conductivity is discussed. Flexible, transparent polymer films, obtained in different ways, show relatively high ionic conductivity (of about 10^?5 S cm^?1 at 20°C). Copyright © 2006 John Wiley & Sons, Ltd.     

Correlating backbone‐to‐backbone distance to ionic conductivity in amorphous polymerized ionic liquids

The morphology and ionic conductivity of poly(1‐n‐alkyl‐3‐vinylimidazolium)‐based homopolymers polymerized from ionic liquids were investigated as a function of the alkyl chain length and counterion type. In general, X‐ray scattering showed three features: (i) backbone‐to‐backbone, (ii) anion‐to‐anion, and (iii) pendant‐to‐pendant characteristic distances. As the alkyl chain length increases, the backbone‐to‐backbone separation increases. As the size of counterion increases, the anion‐to‐anion scattering peak becomes apparent and its correlation length increases. The X‐ray scattering features shift to lower angles as the temperature increases due to thermal expansion. The ionic conductivity results show that the glass transition temperature (T_g) is a dominant, but not exclusive, parameter in determining ion transport. The T_g‐independent ionic conductivity decreases as the backbone‐to‐backbone spacing increases. Further interpretation of the ionic conductivity using the Vogel–Fulcher–Tammann equation enabled the correlation between polymer morphology and ionic conductivity, which highlights the importance of anion hoping between adjacent polymer backbones. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Enhanced electrochemical response of solution‐deposited n‐doping polymer via cocasting with ionic liquid

A novel cocasting approach is presented for improving electroactivity of solution‐cast films of conducting polymers. Solutions of the n‐doping polymer poly(benzimidazobenzophenanthroline) (BBL) were co‐deposited with the ionic liquid electrolyte 1‐ethyl‐3‐methyl‐imidazolium bis(trifluoromethylsulfonyl)imide (EMIBTI). The resultant co‐continuous mixture yielded highly porous polymer films (CC‐BBL) upon removal of solvent and EMIBTI. Electrochemical quartz crystal microgravimetry revealed that the n‐doping process in neat ionic liquid is anion‐dominant, which is contrary to what is observed in dilute electrolyte solutions. The CC‐BBL films exhibit a thirty‐fold increase in initial current response and capacity relative to non‐cocast BBL films. While current response and capacity of the non‐cocast BBL improve with cycling, they level out after 800 cycles at 35% of those of the CC‐BBL. CC‐BBL shows high n‐doping stability; no decrease in electroactivity is seen after 1000 cycles. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Facile one‐pot synthesis and characterization of novel nanostructured organic dispersible polyaniline

Novel polyaniline (PANI) with nanotube, nanosheet, and nanofiber shapes was facilely synthesized by a self‐templating one‐pot process. Anilinium‐dodecylsulfate (DS) complex, obtained by mixing equivalent amounts of aniline and sodium dodecylsulfate (SDS), played a template‐like role in forming PANI nanostructures. It was found that the morphology and electrical conductivity of the PANI nanostructures changed with the amount of SDS and the reaction temperature. Nanotube‐shaped PANI synthesized at the temperature of anilinium‐DS complex formation in presence of SDS (concentration <0.12 M) showed high conductivity (12.9 S/cm). At higher temperature, the morphology changed to shape of a rose flower and electrical conductivity decreased to 3.95 S/cm. This suggested that both temperature and SDS concentration were key parameters for controlling the formation of the anilinium‐DS complex that acted as a template. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1024–1029, 2009     

Synthesis and properties of processable conducting copolymers from N‐ethylaniline with aniline

Copolymers were synthesized through the chemically oxidative polymerization of N‐ethylaniline (EA) and aniline (AN) in five acid aqueous media. The polymerization yield, intrinsic viscosity, molecular weight, solubility, solvatochromism, electrical conductivity, and mechanical properties of the copolymer films were systematically studied through changes in the comonomer ratio, polymerization temperature, oxidant, oxidant/monomer ratio, and acid medium. Open‐circuit‐potential and temperature measurements of the polymerization solutions showed that the polymerization rate depended on the EA content, and the polymerization was an exothermic reaction. The resultant copolymers were characterized in detail with IR, ultraviolet–visible, and ¹H NMR spectroscopy, gel permeation chromatography, wide‐angle X‐ray diffractometry, and scanning electron microscopy. The reactivity ratios of the monomer pair were calculated from the ¹H NMR spectra of the copolymers formed at a low conversion. The polymers exhibited good solubility and interesting solvatochromism in most of the solvents and variable conductivity with the EA/AN ratio and doping state. The conductivity of the HCl‐doped copolymers increased monotonically from 5.61 × 10^?7 to 2.55 × 10^?1 S/cm with decreasing EA content from 100 to 0 mol % and showed a percolation transition between EA concentrations of 20 and 30 mol %. The EA/AN copolymers also had excellent film formability and flexibility together with high mechanical and oxygen‐enriching properties. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6109–6124, 2004     

Organic solvent dispersion of poly(3,4‐ethylenedioxythiophene) with the use of polymeric ionic liquid

A nonaqueous dispersion of poly(3,4‐ethylenedioxythiophene) (PEDOT) was prepared with the use of polymeric ionic liquid (PIL) as a polymerization template and phase transfer medium. A detailed investigation was performed to understand the role of PIL in the course of polymerization and phase transfer reaction. On the basis of our findings from X‐ray photoelectric spectroscopy (XPS), we propose a mechanism by which the PIL leads to the nanostructured PEDOT colloids in various organic solvents and thus facilitating smoother surface morphologies of the PEDOT‐PIL films. In addition, the enhancement of charge transport was observed for PEDOT‐PIL complex when compared with PEDOT without PIL. Raman spectroscopy indicates that there is a reduced interaction between the charge carriers on the PEDOT and the counter ions bound to PIL, thus promoting charge carrier hopping rates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6872–6879, 2008     

The NSN link as electron accepting moiety for stable,solution‐processable conjugated oligomers

New conjugated oligomers, oligo(9,9‐didodecylfluorene‐bis‐sulphurdiimide), consisting of 9,9‐didodecylfluorene separated by ? N?S?N? moieties, are reported. These oligomers are stable purple solids under ambient conditions with absorption covering a broad spectral window in the UV‐vis range and a main broad peak centered at 555 nm with onset extending to 700 nm. These oligomers show an obviously longer conjugation length than its dimeric analogue, bis‐9,9‐didodecyl‐fluorene‐2‐sulfurdiimide that shows a band‐edge absorption centered at 484 nm with onset at 590 nm. The dimer and oligomers are soluble in a variety of organic solvents. Moreover, we found that the oligomer with an average repeating‐unit number of six could significantly quench the photoluminescence (PL) of poly[2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐1,4‐phenylene vinylene] (MEH‐PPV) or poly(3‐hexylthiophene) (P3HT) in the solid state. More importantly, the composites of this oligomer with P3HT showed a nearly 10‐fold enhancement of the photocurrent, compared with that of P3HT itself. In addition, the PL of this oligomer could be quenched by the presence of phenyl‐C₆₁‐butyric acid methyl ester (PCBM) in toluene. These results suggest the presence of photoinduced charge transfer in composites of these oligomers blended with an electronic partner that either donates or accepts electrons. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Spray‐processable thiazolothiazole‐based copolymers with altered donor groups and their electrochromic properties

Two novel thiazolo[5,4‐d]thiazole containing donor–acceptor type alternating copolymers, poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)thiophen‐2‐yl)‐5‐(thiophen‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzTh) and poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)furan‐2‐yl)‐5‐(furan‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzFr) were synthesized by Stille coupling polymerization and their electrochemical and electrochromic properties were explored. Electrochemical activities of the spray‐casted polymer films were determined by cyclic voltammetry. To evaluate the effect of thiophene and furan moieties on the optical properties of the copolymers, spectroelectrochemistry studies were performed. To examine the switching abilities, copolymer films were subjected to a double potential step chronoamperometry in their local maximum absorptions. Both thiazolothiazole‐containing copolymers showed multichromic properties with low band‐gap values 1.7 and 1.9 eV for BTzTh and BTzFr, respectively. The decent electrochromical properties together with solution processability make them important candidates for electrochromic applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3901–3906     

Fluorene‐based alternating polymers containing electron‐withdrawing bithiazole units: Preparation and device applications

We report here the synthesis via Suzuki polymerization of two novel alternating polymers containing 9,9‐dioctylfluorene and electron‐withdrawing 4,4′‐dihexyl‐2,2′‐bithiazole moieties, poly[(4,4′‐dihexyl‐2,2′‐bithiazole‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PHBTzF) and poly[(5,5′‐bis(2″‐thienyl)‐4,4′‐dihexyl‐2,2′‐bithiazole‐5″,5″‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)] (PTHBTzTF), and their application to electronic devices. The ultraviolet–visible absorption maxima of films of PHBTzF and PTHBTzTF were 413 and 471 nm, respectively, and the photoluminescence maxima were 513 and 590 nm, respectively. Cyclic voltammetry experiment showed an improvement in the n‐doping stability of the polymers and a reduction of their lowest unoccupied molecular orbital energy levels as a result of bithiazole in the polymers' main chain. The highest occupied molecular orbital energy levels of the polymers were ?5.85 eV for PHBTzF and ?5.53 eV for PTHBTzTF. Conventional polymeric light‐emitting‐diode devices were fabricated in the ITO/PEDOT:PSS/polymer/Ca/Al configuration [where ITO is indium tin oxide and PEDOT:PSS is poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid)] with the two polymers as emitting layers. The PHBTzF device exhibited a maximum luminance of 210 cd/m² and a turn‐on voltage of 9.4 V, whereas the PTHBTzTF device exhibited a maximum luminance of 1840 cd/m² and a turn‐on voltage of 5.4 V. In addition, a preliminary organic solar‐cell device with the ITO/PEDOT:PSS/(PTHBTzTF + C₆₀)/Ca/Al configuration (where C₆₀ is fullerene) was also fabricated. Under 100 mW/cm² of air mass 1.5 white‐light illumination, the device produced an open‐circuit voltage of 0.76 V and a short‐circuit current of 1.70 mA/cm². The fill factor of the device was 0.40, and the power conversion efficiency was 0.52%. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1845–1857, 2005     

The catalytic performance study of polymerized ionic liquid synthesized in different conditions on alkylation of o‐Xylene with styrene

In this work, a series of novel acidic polymerized ionic liquids were used as heterogeneous catalyst for alkylation of o‐Xylene with styrene. And the effect of the amount of initiator and the type of acid used for ion exchange on catalyst structure and the catalytic performance of catalysts for alkylation were studied thoroughly. The experiment results show: when the percentage of the amount of initiator in the total material is 3%, the polymerized ionic liquid catalyst MPM‐SO₃H‐[C₃V][SO₃CF₃] has the most uniform with a specific surface area of 97.30 m²/g and a pore volume of 0.35 cm³/g. Benefiting from the unique structure features, MPM‐SO₃H‐[C₃V][SO₃CF₃] manifested an excellent catalytic performance for alkylation of o‐Xylene with styrene, along with the conversion of styrene was 96.8% and the yield of 1‐Phenyl‐1‐ortho‐xylene ethane was 94.7%. Therefore, this work provides a novel reference to the synthesis of polymerized ionic liquids and clearly explains the advantage of novel acidic polymerized ionic liquids on alkylation.     

A new ionic liquid surface‐imprinted polymer for selective solid‐phase‐extraction and determination of sulfonamides in environmental samples

Toward improving the selective adsorption performance of molecularly imprinted polymers in strong polar solvents, in this work, a new ionic liquid functional monomer, 1‐butyl‐3‐vinylimidazolium bromide, was used to synthesize sulfamethoxazole imprinted polymer in methanol. The resulting molecularly imprinted polymer was characterized by Fourier transform infrared spectra and scanning electron microscopy, and the rebinding mechanism of the molecularly imprinted polymer for sulfonamides was studied. A static equilibrium experiment revealed that the as‐obtained molecularly imprinted polymer had higher molecular recognition for sulfonamides (e.g., sulfamethoxazole, sulfamonomethoxine, and sulfadiazine) in methanol; however, its adsorption of interferent (e.g., diphenylamine, metronidazole, 2,4‐dichlorophenol, and m‐dihydroxybenzene) was quite low. ¹H NMR spectroscopy indicated that the excellent recognition performance of the imprinted polymer was based primarily on hydrogen bond, electrostatic and π‐π interactions. Furthermore, the molecularly imprinted polymer can be employed as a solid phase extraction sorbent to effectively extract sulfamethoxazole from a mixed solution. Combined with high‐performance liquid chromatography analysis, a valid molecularly imprinted polymer‐solid phase extraction protocol was established for extraction and detection of trace sulfamethoxazole in spiked soil and sediment samples, and with a recovery that ranged from 93–107%, and a relative standard deviation of lower than 9.7%.     

Synthesis,characterization, and electrical properties of a diazodiphenylene‐bridged Cu–phthalocyanine polymer

A diazodiphenylene‐bridged Cu–phthalocyanine polymer was synthesized from the diazonium salt of bensidine and the Cu(II) 1,8,15,22‐tetraaminophthalocyanine complex and characterized with Fourier transform infrared, ultraviolet–visible spectroscopy, and elemental analysis. The polymer was partially soluble in organic solvents such as dimethylformamide and tetrahydrofuran. The molecular weight of the soluble part of the polymer was investigated with ebullioscopy and viscosimetry methods in tetrahydrofuran. Both methods showed that the molecular weight of the polymer was much larger than that of the complex. The conductivity of the samples was measured with a four‐prop conductivity measuring device. Iodine and hydrogen chloride were doped to the polymer, and an increase of about 10⁴ S cm^?1 in the electrical conductivity was observed. The cyclic voltammogram of the diazodiphenylene‐bridged Cu–phthalocyanine polymer in contact with a LiClO₄ electrolyte exhibited two reductions and two reoxidations with high reversibility and electrochemical stability. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5692–5698, 2006     

Electrochemical polymerization of imidazolum‐ionic liquids bearing a pyrrole moiety

A series of imidazolium‐based ionic liquid monomers bearing a terminal pyrrole moiety were synthesized and electrochemically polymerized. It is found that the polymerizability of the synthesized ionic liquids is strongly dependent on the type of the counteranions. Although bromide monomer is not polymerizable, well‐defined polymeric films can be formed on various substrates in the cases of flour‐containing anions (BF₄^?, PF₆^?). The performed characterizations show that all resulting polypyrrole films are electroactive, and the imidazolium‐based ionic liquid moieties are correctly incorporated in polymer films during the electropolymerization process. This work not only provides a facile new method to immobilize ionic liquids on solid surface. Interestingly, without use of any template unique “knit” morphology and nanostructure, even hierarchical structures could also be produced by the electropolymerization of these new functionalized pyrrole monomers. We found that the properties of the pendant ionic liquid units on the surface of the formed polymer films preserved, and by simple anion exchange their surface energy and tension could be easily tuned without loss of the electrical, optical properties, and morphology of the polypyrrole films. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4151–4161, 2008     

New Organic Dispersions of Conducting Polymers Using Polymeric Ionic Liquids as Stabilizers

Summary: Polypyrrole (PPy), polyaniline (PANI), and poly(ethylenedioxythiophene) (PEDOT) aqueous dispersions were prepared by polymerizing the corresponding monomer in the presence of a polymeric ionic liquid (PIL), poly(1‐vinyl‐3‐ethylimidazolium bromide). By addition of bispentafluoroethanesulfonimide lithium salt, the PIL stabilizer becomes hydrophobic and precipitates in water and traps the conducting polymer microparticles inside. The dispersion of the recovered powders in organic solvents leads to organic conducting dispersions. After casting the organic dispersions, hydrophobic films with electrical conductivity values as high as 0.1 S · cm⁻¹ were obtained.

A new synthetic route to new organic dispersions.     

Study on incomplete fluorescence quenching of cationic poly(p‐phenylenevinylene)s with different contents of cis‐ and trans‐vinylic linkages

Fluorescence properties of a series of cationic poly(p‐phenylenevinylene) (PPV) derivatives with different contents of cis‐ and trans‐vinylic linkages quenched by Fe(CN) were intensively investigated. PPVs with cis‐/trans‐vinylic linkages display downward Stern‐Volmer curves indicating incomplete quenching. The fluorescence quenching mechanism and the effect of many factors possible on the incomplete quenching has been examined, and the difference of the quenching behavior of two isomers was investigated, which further confirmed that the presence of cis‐vinylic linkages would most probably cause inaccessible fluorophores and thus the incomplete quenching. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010