Ligand‐free CuTC‐catalyzed N‐arylation of amides,anilines and 4‐aminoantipyrine: synthesis of N‐arylacrylamides, 4‐amido‐N‐phenylbenzamides and 4‐amino(N‐phenyl)antipyrenes

N‐Arylation of amides and anilines with aryl iodides was efficiently catalyzed by copper thiophenecarboxylate under ligand‐free conditions with good to excellent yields. A variety of substituted aryl iodides, amides, anilines and 4‐aminoantipyrine were found to be applicable to the simple catalytic system. Furthermore, some practical, unique secondary amides, such as N‐arylacrylamides and 4‐amido‐N‐phenylbenzamides, and 4‐amino(N‐phenyl)antipyrenes, which are difficult to obtain by the classical methods, were prepared. Copyright © 2013 John Wiley & Sons, Ltd.     

Palladium‐catalyzed carbonylative cyclization of 1‐bromoallyl bromides with anilines leading to 1‐aryl‐1H‐pyrrol‐2(5H)‐ones

1‐Bromoallyl bromides are carbonylatively cyclized with anilines under carbon monoxide pressure in DMF in the presence of a catalytic amount of a palladium catalyst along with a base to give the corresponding 1‐aryl‐1H‐pyrrol‐2(5H)‐ones in moderate to good yield. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and ethylene polymerization of 8‐(fluorenylarylimino)‐5,6,7‐trihydroquinolylnickel chlorides: Tailoring polyethylenes by adjusting fluorenyl position and adduct Et2Zn

A series of 8‐(arylimino)‐5,6,7‐trihydroquinolines ligand pendant fluorenyl group at N‐aryl ring, and their nickel complexes ( Ni1 ? Ni5 ) have been prepared and characterized. Once activated with Et₂AlCl, the complexes Ni1 , Ni2 , and Ni3 bearing ligands from para‐fluorenylaniline produced unimodal polyethylenes; on the contrary complexes Ni4 and Ni5 gave bimodal polyethylenes due to steric influence of ligands from ortho‐fluorenyl anilines. With a increment of Et₂Zn/ Ni4 ratio from 0 to 400, the distinct bimodel polyethylenes were obtained with molecular weights shifted from 14.3 to 57.6 kg·mol^?1; apart shiftment to higher molecular weights, the portion of low molecular weight decreased along with higher portion of high molecular weight. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1910–1919     

Poly(aryl ether)s containing o‐terphenyl subunits. II. Random poly(ether sulfone)s

The synthesis of a new A₂X‐type difluoride monomer, N‐2‐pyridyl‐4′,4″‐bis‐(4‐fluorobenzenesulfonyl)‐o‐terphenyl‐3,6‐dimethyl‐4,5‐dicarboxylic imide ( 3 ), is described. The monomer 3 was incorporated into a series of copoly(aryl ether sulfone)s by polymerization of 4,4′‐isopropylidenediphenol and 4,4′‐difluorophenylsulfone. The incorporation of monomer 3 had an observable effect on both the glass‐transition temperature of poly(aryl ether sulfone)s and the tendency for macrocyclic oligomers to form during polymerization. Replacement of the pyridyl imide group via a transimidization reaction with propargyl amine proceeded quantitatively and without polymer degradation. The acetylene containing copoly(aryl ether sulfone) could be crosslinked by simple thermal treatment, resulting in an increase in the glass‐transition temperature and solvent resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 9–17, 2000     

Synthesis of 1,3‐Selenazol‐2(3H)‐imines

The reaction of N,N′‐diarylselenoureas 16 with phenacyl bromide in EtOH under reflux, followed by treatment with NH₃, gave N,3‐diaryl‐4‐phenyl‐1,3‐selenazol‐2(3H)‐imines 13 in high yields (Scheme 2). A reaction mechanism via formation of the corresponding Se‐(benzoylmethyl)isoselenoureas 18 and subsequent cyclocondensation is proposed (Scheme 3). The N,N′‐diarylselenoureas 16 were conveniently prepared by the reaction of aryl isoselenocyanates 15 with 4‐substituted anilines. The structures of 13a and 13c were established by X‐ray crystallography.     

Synthesis of 9,9‐Disubstituted 9H‐Pyrrolo[1,2‐a]indoles by Hydriodic Acid‐Catalyzed Cyclization of 1‐[2‐(1‐Aryl(or methyl)ethenyl)phenyl]‐1H‐pyrroles

A novel method is reported for the synthesis of 9,9‐disubstituted 9H‐pyrrolo[1,2‐a]indoles. Cyclization of 1‐[2‐(1‐aryl(or methyl)ethenyl)phenyl]‐1H‐pyrroles, which can be easily prepared from 2‐(1‐aryl(or methyl)ethenyl)anilines, proceeds smoothly, in general, at 0° in the presence of a catalytic (or an equimolar) amount of HI in MeCN to provide the desired products.     

Facile synthesis of soluble aromatic poly(amide amine)s via C–N coupling reaction: Characterization,thermal, and optical properties

Aromatic poly(amide amine)s (APAAs), as novel high‐performance polymers, have been obtained by the condensation polymerization of N,N'‐bis(4‐bromobenzoyl)‐p‐phenylenediamine with two different primary aromatic diamines via palladium‐catalyzed aryl amination reaction. The structures of the polymers are characterized by means of FTIR, ¹H NMR spectroscopy, and elemental analysis, the results show a good agreement with the proposed structures. DSC and TGA measurements exhibit that polymers possess high glass transition temperature (T_g > 240 °C) and good thermal stability with high decomposition temperatures (T₅ > 400 °C). These novel polymers also display good solubility. In addition, due to its special structure, APAA‐2 is endowed with significantly strong photonic luminescence in N,N‐dimethylformamide and good electroactivity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4845–4852     

PdCl2(Ph3P)2/Salicylaldimine Catalyzed Diarylation of Anilines with Unactivated Aryl Chlorides

Triphenylphosphine and salicylaldimine could be used as a mixed ligand system to obtain a high catalytic activity for palladium catalyzed diarylation of primary anilines with unactivated aryl chlorides by the synergistic effect of ligands. The activity and selectivity of the catalytic system could be improved by modifying the structure of salicylaldimine. In refluxing o ‐xylene, PdCl₂(Ph₃P)₂ with 2,5‐ditrifluoromethyl N ‐phenylsalicylaldimine as a coligand shows high efficiency for the diarylation of various anilines. The catalytic system shows good toleration for the steric hindrance of the substrates. The facile catalytic system works as well on the multiple arylation of 1,1′‐biphenyl‐ 4,4′‐diamine with aryl chlorides to afford N ,N ,N′ ,N′ ‐tetraaryl‐1,1′‐biphenyl‐4,4′‐diamines which are important intermediates of organic light emitting diode (OLED) hole transport materials.     

Hybrid inorganic–organic poly(carborane‐siloxane‐arylacetylene) structural isomers with in‐chain aromatics: Synthesis and properties

Structural isomers of thermo‐oxidatively stable poly(carborane‐siloxane‐arylacetylene) (PCSAA), namely, m‐PCSAA and p‐PCSAA, were synthesized by the reaction of the dimagnesium salts of m‐diethynylbenzene or p‐diethynylbenzene with 1,7‐bis(chlorotetramethyldisiloxyl)‐m‐carborane. The developed polymers have exceptional thermo‐oxidative properties similar to their diacetylene counterpart poly(carborane‐siloxane‐acetylene), PCSA. Thermal treatment of either of the PCSAAs results in a fully crosslinked thermoset by 500 °C resulting from the cycloaddition reactions involving the acetylene and aryl functionalities and subsequent formation of bridging disilylmethylene entities as discerned from Fourier transform infrared, ¹³C and ²⁹Si solid‐state NMR, and XPS studies. X‐ray diffraction analysis revealed that the thermosets obtained from p‐PCSAA possess enhanced crystallinity when compared to that obtained from m‐PCSAA possibly due to more efficient packing interactions of the p‐diethynylbenzene groups during thermoset formation. The presence of the aryl groups in the backbone of the PCSAAs' chains appeared to have enhanced the storage and bulk moduli of their thermosets when compared to the thermoset of PCSA. Dielectric studies of m‐PCSAA and p‐PCSAA revealed segmental relaxation peaks, α, above their glass transition temperatures with p‐PCSAA exhibiting a broader peak with a slower relaxation rate than m‐PCSAA. © 2013 Wiley Periodicals, Inc.^? J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2638–2650     

A novel fluorine‐containing graft copolymer bearing perfluorocyclobutyl aryl ether‐based backbone and poly(methyl methacrylate) side chains

A series of novel graft copolymers consisting of perfluorocyclobutyl aryl ether‐based backbone and poly(methyl methacrylate) side chains were synthesized by the combination of thermal [2π + 2π] step‐growth cycloaddition polymerization of aryl bistrifluorovinyl ether monomer and atom transfer radical polymerization (ATRP) of methyl methacrylate. A new aryl bistrifluorovinyl ether monomer, 2‐methyl‐1,4‐bistrifluorovinyloxybenzene, was first synthesized in two steps from commercially available reagents, and this monomer was homopolymerized in diphenyl ether to provide the corresponding perfluorocyclobutyl aryl ether‐based homopolymer with methoxyl end groups. The fluoropolymer was then converted to ATRP macroinitiator by the monobromination of the pendant methyls with N‐bromosuccinimide and benzoyl peroxide. The grafting‐from strategy was finally used to obtain the novel poly(2‐methyl‐1,4‐bistrifluorovinyloxybenzene)‐g‐poly(methyl methacrylate) graft copolymers with relatively narrow molecular weight distributions (M_w/M_n ≤ 1.46) via ATRP of methyl methacrylate at 50 °C in anisole initiated by the Br‐containing macroinitiator using CuBr/dHbpy as catalytic system. These fluorine‐containing graft copolymers can dissolve in most organic solvents. This is the first example of the graft copolymer possessing perfluorocyclobutyl aryl ether‐based backbone. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Palladium‐Catalyzed Amination of Aryl Sulfides with Anilines

A combination of a palladium–NHC catalyst and potassium hexamethyldisilazide enables the amination of aryl sulfides with anilines to afford a wide variety of diarylamines. The reaction conditions are versatile enough for the reaction of even bulky ortho‐substituted aryl sulfides. This amination can be applied to the modular synthesis of N‐aryl carbazoles from the corresponding ortho‐bromothioanisoles. As aryl sulfoxides undergo extended Pummerer reactions to afford ortho‐substituted aryl sulfides, the Pummerer products are thus useful substrates for the amination to culminate in efficient syntheses of a 2‐anilinobenzothiophene and an indole as proof‐of‐principle of the utility of the extended Pummerer reaction/amination cascade.     

Ethylene polymerization by bis(salicylaldiminate)nickel(II)/aluminoxane catalysts

The homopolymerization of ethylene by using different catalytic systems based on dinitro‐substituted bis(salicylaldiminate)nickel(II) precursors such as bis[3,5‐dinitro‐N(2,6‐diisopropylphenyl)]nickel(II) and bis[3,5‐dinitro‐N(phenyl)]nickel(II) in combination with organoaluminum compounds was investigated. In particular, the catalytic performances were studied as a function of the main reaction parameters, such as temperature, pressure, Al/Ni molar ratio, and duration. Methylaluminoxane resulted in the best co‐catalyst. Activities up to 200 kg polyethylene/(mol Ni × h) to give a linear high‐molecular‐weight polymer were achieved. The influence of the bulkiness of the substituents on the N‐aryl group of the aldimine ligand was also checked; it resulted in a determinant for catalytic activity rather than for polymer characteristics. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2534–2542, 2004     

Cyclic poly(lactide)s via the ROPPOC method catalyzed by alkyl‐ or aryltin chlorides

A comparison of tributyltin chloride, dibutyltin dichloride, and butyltin trichloride as catalysts of ring‐opening polymerizations (ROPs) of l‐lactides at 160 °C in bulk reveals increasing reactivity in the above order, but only the least reactive catalysts, Bu₃SnCl, yield a uniform reaction product, namely cyclic poly(L‐lactide)s with weight average molecular weights (M_w's) in the range of 40,000–80,000. A comparison of dimethyltin , dibutyltin , and diphenyltin dichlorides resulted in the following order of reactivity: Me₂SnCl₂ < Bu₂SnCl₂ < <Ph₂SnCl₂. In this series also, the most reactive catalyst yields cyclic polylactides, but the extent of cyclization varies with the molecular weight. The formation of cyclic polylactides is explained by ROP combined with simultaneous polycondensation involving end‐to‐end cyclization (ROPPOC method). ROP of meso‐lactide at 80 or 60 °C yields even‐numbered linear chains as main products, a result supporting the ROPPOC mechanism. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 952–960     

Preparation,characterization, and properties of poly(aryl ether sulfone) systems with double‐decker silsesquioxane in the main chains by reactive blending

A series of copoly(aryl ether sulfone)s containing double‐decker‐shaped silsesquioxane (DDSQ) in the main chain was prepared. Toward this end, a novel diphenol polyhedral oligomeric silsesquioxane macromer was synthesized by hydrosilylation between 3,13‐dihydro octaphenyl double‐decker silsesquioxane (denoted dihydro DDSQ) and eugenol. The poly(aryl ether sulfone)s were synthesized from diphenol DDSQ, bisphenol A (BPA), and 4‐fluorophenyl sulfone using a one‐step high‐temperature solution method. By adjusting the ratio of diphenol DDSQ to BPA, copolymers with variable DDSQ content in the main chains were obtained. With increased DDSQ content in the main chain, the glass transition temperature decreased based on differential scanning calorimetry, and anti‐degradation was enhanced based on thermogravimetric analysis. Moreover, the dielectric constant κ of pure polymer (3.19 at 1 MHz) initially increased to 4.04 (DDSQ molar ratio = 10%), and then decreased to 2.68 at 1 MHz (DDSQ molar ratio = 100%). Crystallization behavior, solubility, and surface hydrophobicity were also investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 780–788     

Synthesis and properties of fluorine‐containing poly(aryl ether oxadiazole)s

Fluorine‐containing poly(aryl ether 1,3,4‐ozadiazole)s were synthesized by the nucleophilic aromatic substitution reaction of 2,5‐bis(2,3,4,5,6‐pentafluorophenyl)‐1,3,4‐oxadiazole and various bisphenols in the presence of potassium carbonate. The polymerizations were carried out at 30 °C in 1‐methyl‐2‐pyrrolidinone to avoid the gelation caused by a crosslinking reaction at para and ortho carbons to the 1,3,4‐oxidiazole ring. The obtained polymers were all para‐connected linear structures. The obtained fluorine‐containing poly(aryl ether 1,3,4‐ozadiazole)s showed excellent solubility and afforded tough, transparent films by the solution‐casting method. They also exhibited a high glass transition temperature depending on the molecular structure, and the glass transition temperature could be controlled by the bisphenols in the range of 157–257 °C. They showed good thermal stability and excellent hydrophobicity due to the incorporation of the 2,3,5,6‐tetrafluoro‐1,4‐phenylene moiety. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2855–2866, 2007     

Light‐Induced CH Arylation of (Hetero)arenes by In Situ Generated Diazo Anhydrides

Diazo anhydrides (Ar?N?N?O?N?N?Ar) have been known since 1896 but have rarely been used in synthesis. This communication describes the development of a photochemical catalyst‐free C?H arylation methodology for the preparation of bi(hetero)aryls by the one‐pot reaction of anilines with tert‐butyl nitrite and (hetero)arenes under neutral conditions. The key step in this procedure is the in situ formation and subsequent photochemical (>300 nm) homolytic cleavage of a transient diazo anhydride intermediate. The generated aryl radical then efficiently reacts with a (hetero)arene to form the desired bi(hetero)aryls producing only nitrogen, water, and tert‐butanol as byproducts. The scope of the reaction for several substituted anilines and (hetero)arenes was investigated. A continuous‐flow protocol increasing selectivity and safety has been developed enabling the experimentally straightforward preparation of a variety of substituted bi(hetero)aryls within 45 min of reaction time.     

Chelation‐Assisted Cross‐Coupling of Anilines through In Situ Activation as Diazonium Salts with Boronic Acids under Ligand‐, Base‐, and Salt‐Free Conditions

We describe the coupling of anilines with aryl boronic acids, under ligand‐, base‐, and salt‐free conditions at room temperature. This new reaction proceeds through the formation of an aryl palladium alkoxo complex, which allows the transmetalation step with aryl boronic acids without any external base. Importantly, this sustainable procedure generates only environmentally friendly byproducts such as tBuOH, H₂O, N₂, and B(OH)₃. The reaction mechanism has been deeply investigated through experimental and theoretical studies.     

Synthesis and characterization of new poly(aryl ether)s with isolated fluorophores

Four novel poly(aryl ether)s ( P1 – P4 ) consisting of alternate isolated electron‐transporting (3,3″′‐bis‐trifluoromethyl‐p‐quaterphenyl for P1 , P3 or 3,3″′‐dicyano‐p‐quaterphenyl for P2 , P4 ) and hole‐transporting fluorophores [N‐(2‐ethylhexyl)‐3,6‐bis(styryl)carbazole for P1 , P2 or 9,9‐dihexyl‐2,7‐bis(styryl)fluorene for P3 , P4 ] were synthesized and characterized. These poly(aryl ether)s can be dissolved in organic solvents and exhibited good thermal stability with 5% weight‐loss temperature above 500 °C in nitrogen atmosphere. The photoluminescent (PL) spectra of the films of these polymers showed maximum peaks at around 442–452 nm. The PL spectral results revealed that the emission of polymers was dominated by the fluorophores with longer emissive wavelength via the energy transfer from p‐quaterphenyl to 3,6‐bis(styryl)carbazole or 2,7‐bis(styryl)fluorene segments. Therefore, the p‐quaterphenyl segments function only as the electron‐transporting/hole‐blocking units in these polymers, and the other segments are the emissive centers and hole‐transporting units. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital energy levels of these polymers were measured by cyclic voltammetry. The electron‐donating nitrogen atom on carbazole resulted in the higher HOMO energy levels of P1 and P2 than those of P3 and P4 . The single‐layer light‐emitting diodes (LED) of Al/poly(aryl ether)s ( P1 – P4 )/ITO glass were fabricated. P1 , P2 , and P4 revealed blue electroluminescence, but P3 emitted yellow light as a result of the excimer emission. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2215–2224, 2002     

Synthesis and new application of green and recyclable cyclic poly(L‐lactide)‐clay hybrid

We report on the application of biodegradable cyclic poly(L ‐lactide) (PLLA) as new stabilizer; synthesis and application of a cyclic PLLA‐clay hybrid material as recyclable catalyst support. Cyclic PLLAs were used to stabilize palladium nanoparticles synthesized by a wet chemical method. It was found that the palladium particles were smaller with cyclic PLLA stabilizer (～5–10 nm) than the particles obtained from linear PLLA. The cyclic PLLA‐clay hybrid was prepared by a zwitterionic ring‐opening polymerization catalyzed by in situ‐generated N‐heterocyclic carbene catalyst. Palladium (0) nanoparticles were supported and well dispersed on the cyclic PLLA‐clay hybrid to form a new nanocomposite. The nanocomposite was found to be a highly efficient and recyclable catalyst for the aminocarbonylation reactions of aryl halides with various amines. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4167–4174