Influence of branching on the chiral self‐assembly of poly(phenylene ethynylene)

In this contribution, we report the synthesis of chiral all‐conjugated branched poly(phenylene ethynylenes) with a controlled amount of branching. Subsequently, the self‐assembly of these PPEs is studied by means of UV–vis, fluorescence spectroscopy, and DSC and the influence of branching is investigated. Finally, CD‐spectroscopy is used to study the influence of branching and self‐assembly on the chiral expression of these polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 79–84     

Hydrogen bond‐directed self‐assembly of peripherally modified cyclotriphosphazenes with a homeotropic liquid crystalline phase

The synthesis and characterization of hydrogen‐bonded star‐shaped complexes consisting of stilbazolyloxy, azopyridyl, and Schiff base‐substituted cyclotriphosphazenes ( 3a , 3b , and 3c , respectively) and monoalkyloxy, bis(dodecyloxy), and tris(dodecyloxy)benzoic acids are reported. The thermal behaviors of complexes are studied by the means of differential scanning calorimetry, polarizing optical microscopy, and X‐ray diffractometry. Only 3a and 3b with monoalkyloxybenzoic acids show a homeotropic smectic A mesophase. The effect of azo and ethylene linkage of mesogenic groups in the cyclotriphosphazenes and the length of the flexible chain in monoalkyloxybenzoic acids on mesophase transition behaviors are investigated, revealing that the linkages in mesogenic groups governs the phase transition temperatures, and the length of flexible chain in proton donors plays an important role in controlling the magnitude of enthalpy and entropy of mesophase transitions in this supramolecular liquid crystal system. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4691–4703, 2008     

Energy transfer in poly(3‐hexylthiophene)‐g‐Polyfluorene graft copolymers

Conjugated graft copolymers consisting of a poly(3‐hexylthiophene) (P3HT) backbone and poly(9,9'‐dioctylfluorene) side chains (PF) with different grafting degrees were synthesized by the CuAAC reaction. The properties of these materials were studied by UV‐Vis and fluorescence spectroscopy. The former technique provides insight in their self‐assembly, while the latter is used to study the energy funneling from the PF side chains to the P3HT backbone. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1252–1258     

Evaporation‐Driven Self‐Assembly of Colloidal Silica Dispersion: New Insights on Janus Particles

The evaporation driven self‐assembly of novel colloidal silica Janus particles was evaluated by scanning electron microscopy in comparison to unfunctionalized silica particles. The cyclodextrin‐ and azobenzene‐modified compound was obtained utilizing Pickering emulsion approach, in which the particles were immobilized on solidified wax droplets and subsequently functionalized. Silica particles were modified with 3‐aminopropyl trimethoxysilane and afterward reacted with tosyl‐β‐CD or phenylazo(benzoic acid), respectively. Mesoscopic structures of the colloidal dispersions, as dried films from aqueous solution, have been investigated by scanning electron microscopy and dynamic light scattering. Interestingly, it has been observed that the Janus particles show a significantly different evaporation‐induced assembly than the unmodified particles.     

Functional organogel based on a salicylideneaniline derivative with enhanced fluorescence emission and photochromism

A new organogelator based on a salicylideneaniline derivative with cholesterol moieties was synthesized, and it was proposed that it could gelate various organic solvents, such as 1-butanol, 1-octanol, butyl acetate, tetrachloromethane, benzene, toluene through combination with a gelation test. From the results of analysis by UV/Vis absorption, circular dichroism (CD), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) studies and semiempirical (AM1) calculations, we believed that the gelator molecules could self-assemble into left-handed helical nanofibers through unimolecular layer packing, which further twisted into the thicker fibers and constructed 3D networks in the gel phase. Interestingly, the organogel exhibited strong fluorescence enhancement relative to a solution of the same concentration because of the formation of J aggregations. Meanwhile, photochromism of the organogel could take place under UV-light irradiation. Both strong fluorescence emission and photochromism properties were concurrent in one system based on a salicylideneaniline derivative. It was suggested that the self-assembly of the functional organogelator could lead to unique photophysical properties.     

Main‐chain,thermotropic, liquid‐crystalline,hydrogen‐bonded polymers of 4,4′‐bipyridyl with aliphatic dicarboxylic acids

A series of main‐chain, thermotropic, liquid‐crystalline (LC), hydrogen‐bonded polymers or self‐assembled structures based on 4,4′‐bipyridyl as a hydrogen‐bond acceptor and aliphatic dicarboxylic acids, such as adipic and sebacic acids, as hydrogen‐bond donors were prepared by a slow evaporation technique from a pyridine solution and were characterized for their thermotropic, LC properties with a number of experimental techniques. The homopolymer of 4,4′‐bipyridyl with adipic acid exhibited high‐order and low‐order smectic phases, and that with sebacic acid exhibited only a high‐order smectic phase. Like the homopolymer with adipic acid, the two copolymers of 4,4′‐bipyridyl with adipic and sebacic acids (75/25 and 25/75) also exhibited two types of smectic phases. In contrast, the copolymer of 4,4′‐bipyridyl with adipic and sebacic acids (50/50), like the homopolymer with sebacic acid, exhibited only one high‐order smectic phase. Each of them, including the copolymers, had a broad temperature range of LC phases (36–51 °C). The effect of copolymerization for these hydrogen‐bonded polymers on the thermotropic properties was examined. Generally, copolymerization increased the temperature range of LC phases for these polymers, as expected, with a larger decrease in the crystal‐to‐LC transition than in the LC‐to‐isotropic transition. Additionally, it neither suppressed the formation of smectic phases nor promoted the formation of a nematic phase in these hydrogen‐bonded polymers, as usually observed in many thermotropic LC polymers. The thermal transitions for all of them, measured by differential scanning calorimetry, were well below their decomposition temperatures, as measured by thermogravimetric analysis, which were in the temperature range of 193–210 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1282–1295, 2003     

Control of thermoresponsive property of urea end‐functionalized poly(N‐isopropylacrylamide) based on the hydrogen bond‐assisted self‐assembly in water

The precise synthesis and variation in the thermoresponsive property based on the supramolecular assembly of a novel urea end‐functionalized poly(N‐isopropylacrylamide) (PNIPAM) were studied. A series of PNIPAMs with different diphenylurea groups at the chain end (X? Ph? NH? CO? NH? Ph? trz? PNIPAM: X = H, OCH₃, CH₃, NO₂, Cl, and CF₃) were synthesized by using a combination of the atom transfer radical polymerization and the copper(I)‐catalyzed azide‐alkyne cycloaddition. The cloud point of the obtained polymers depended on the hydrogen‐bonding ability of the introduced urea group. The ¹H NMR measurement suggested that the obtained PNIPAM assembled in water via the intermolecular hydrogen bonding by the terminal urea group. From the dynamic light scattering and transmission electron microscopy measurements, the aggregated nanoparticles of the resulting polymer were directly observed in water at a temperature below its cloud point. The hydrogen‐bonding property of the chain end urea group was concluded to be involved in the aggregation of the PNIPAM in water, leading to the variation in its cloud point. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6259–6268, 2009     

Synthesis of a Novel Glycopeptide by Polymeranalogous Reaction of Gelatin with Mono‐6‐para‐toluenesulfonyl‐β‐cyclodextrin and its Supramolecular Properties

A synthetic model glycoprotein was successfully synthesized using gelatin and mono‐6‐para‐toluenesulfonyl‐β‐cyclodextrin which were reacted under microwave conditions in basic media. The resulting glycoprotein is observed to form intermolecular inclusion complexes through complexation of the aromatic moieties along the polymer chain by the attached cyclodextrins. This phenomenon was analyzed and proven by 2D NMR spectroscopy (ROESY) and dynamic light scattering (DLS). Above the denaturation temperature, a strong increase of the hydrodynamic diameter was found due to enhanced supramolecular agglomeration. Such a novel glycoprotein with supramolecular self‐recognition would be promising in biomedical applications serving as a drug‐delivery basis polymer.

     

Polymerization and characterization of self‐assembled β‐cyclodextrin‐threaded chiral monomers

A helical inclusion complex polymer was fabricated through the polymerization of β‐cyclodextrin‐threaded chiral monomers. The photo induced polymerization of inclusion complex clusters caused shrinkage of the polymer and decreased the pitches, leading to the disappearance of spring‐like construction under TEM. From the results of circular dichroism of the inclusion complex polymer, the helical construction was confirmed, and an entanglement of the polymer chains is proposed. After removal of the β‐cyclodextrins from the pendant groups of the inclusion complex polymer, the helical structure was found to be maintained. The highly ordered molecular arrangement of β‐cyclodextrins removed from the inclusion complex polymer was confirmed using POM. Here we demonstrate the fabrication of helical polymer fibers composed of entangled polymers through self‐assembled β‐cyclodextrin‐threaded chiral monomers. The helical polymer construction was maintained by the entwisted polymer chains even after the removal of β‐cyclodextrins from the pendant groups of the inclusion complex polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2975–2981, 2010     

Steric‐Factor‐Directed Alternating Supramolecular Copolymer Composed of Hydrogen‐Bonded Cyclohexanetricarboxamide Units

Hydrogen‐bonded supramolecular copolymers were easily prepared by mixing cyclohexanetricarboxamides with three ( 1 ) and six ( 2 ) alkylsilyl groups, and supramolecular fibers were fabricated. When the composition of 1 and 2 was at or close to equimolarity, the supramolecular copolymer chain was found to have an alternating sequence. This was attributed to the fact that the steric factor of the alkylsilyl side chains effectively controls the unit sequence of the supramolecular polymer chain.

     

Unusual Stepwise Protonation and J‐Aggregation of meso‐Tetrakis(N‐methylpyridinium‐4‐yl)porphine on Binding Poly(sodium vinylsulfonate)

The binding of a tetracationic porphyrin to a highly charged polymer like poly(sodium vinylsulfonate) has been investigated over a wide pH range and under various experimental conditions. We present evidence that, depending on the pH, the high electrostatic field exerted by the polymer stabilizes the diprotonated form of the free base porphyrin at unusual pH values or otherwise causes the formation of H‐type aggregates. In particular, at a low polymer concentration, lowering the pH at first allows the formation of the diacid species then it determines its reorganization in close‐packed J‐type aggregates. The employment of various metallo‐derivatives of the title porphyrin enables a better insight into the nature of all the detected species.     

“Sandglass”‐Shaped Self‐Assembly of Coil–rod–coil Triblock Copolymer Containing Rigid Aniline‐Pentamer

The amphiphilic PEG_{1 500}‐b‐EM AP‐b‐PEG_{1 500} (EM PAP) triblock copolymer of poly(ethylene glycol) (PEG) and emeraldine aniline‐pentamer (EM AP) in its concentrated solution can self‐assemble into a special shape like “sandglass”, as observed by transmission electron microscopy (TEM), field emission scanning electron microscopy (ESEM) and atomic force microscopy (AFM). This “sandglass”‐shaped assembly is composed of several “rods” aggregated in the middle, with every “rod” being about 8 µm in length and 300 nm in diameter. We conclude that the special “sandglass”‐shaped assembly may come into being because of the inducement effect of the crystallization of EM AP segments, by studying electron diffraction (ED) results and wide‐angle X‐ray diffusion (WAXD) characterization of the EM PAP triblock copolymer.

     

Solvent‐tunable colors in imprinted helical structures on polymer template via multiple UV‐induced polymerization

A solvent tunable single‐layer polymer film with a multipitched photonic structure as a new photonic band gap material has been developed by imprinting the helical structures on polymer matrices through multiple photocrosslinking in an induced chiral nematic mesophase. Here, the polymer matrices themselves served as a chiral template, which exhibited Bragg reflections in the absence of both a chiral dopant and anisotropic materials because of the memory effects of the polymer network. Tuning of colors was achieved by making a refractive index contrast in the two periodic media of imprinted solid helical structure and the isotropic liquids that fill it. On incorporation of various isotropic liquids in the imprinted matrices, a sharp peak in the reflection spectrum shifted drastically, which indicated that the wavelength shifts strongly depended on the sort of liquids that filled the matrices. The effects of temperature on the imprinted polymer template feeding the various liquids were studied through the reflectance spectra. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Supramolecular template‐directed synthesis of stable and high‐efficiency photoluminescence 9,10‐diphenylanthryl‐bridged ladder polysiloxane

A soluble well‐defined 9,10‐diphenylanthryl‐bridged ladder polysiloxane ( DPAnLP ) was prepared via supramolecular assembly‐directed condensation polymerization of silanols. The ladder superstructure ( LS ) was obtained via a synergistic interaction of H‐bonding and π–π stacking between polymerizable precursor 2‐tert‐butyl‐9,10‐bis(methyldihydroxylsilyl)anthracene in organic solvent. The resultant LS was then used as template to direct the condensation of silanol groups to obtain DPAnLP with high regularity. It was found that DPAnLP can emit blue light (430 nm) with great stability and high efficiency in both solution and solid film, which indicated a well organizing of fluorophore within confined environment (ladder structure). TGA and DSC measurements showed that DPAnLP had good thermal stability, and cyclic voltammetry detection gave a low‐lying highest occupied molecular orbital level. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2491–2497, 2010     

Spontaneous Vesicle Formation in Aqueous Solutions of Comb‐Like PEG

Summary: A novel comb‐like poly(ethylene glycol) (CPEG), with dominant water‐soluble PEG, is found to spontaneously aggregate into vesicles above a certain concentration in water. The hollow, three‐dimensional structure of the vesicles is proven by TEM, SEM, and AFM. The diameters of the vesicles are from 200 to 500 nm with 50 nm walls. The spontaneously formed vesicles can be further cross‐linked by the reaction between divinyl sulfone (DVS) and the hydroxy groups in the side chains of the CPEG. The spontaneously formed vesicles with dense reactive hydroxy groups will have great potential in both applications and research.

SEM image of the uncross‐linked vesicles.     

Synthesis,Self‐Assembly,and Multi‐Stimuli Responses of a Supramolecular Block Copolymer

A supramolecular block copolymer is prepared by the molecular recognition of nucleobases between poly(2‐(2‐methoxyethoxy)ethyl methacrylate‐co‐oligo(ethylene glycol) methacrylate)‐SS‐poly(ε‐caprolactone)‐adenine (P(MEO₂MA‐co‐OEGMA)‐SS‐PCL‐A) and uracil‐terminated poly(ethylene glycol) (PEG‐U). Because the block copolymer is linked by the combination of covalent (disulfide bond) and noncovalent (A U) bonds, it not only has similar properties to conventional covalently linked block copolymers but also possesses a dynamic and tunable nature. The copolymer can self‐assemble into micelles with a PCL core and P(MEO₂MA‐co‐OEGMA)/PEG shell. The size and morphologies of the micelles/aggregates can be adjusted by altering the temperature, pH, salt concentration, or adding dithiothreitol (DTT) to the solution. The controlled release of Nile red is achieved at different environmental conditions.

     

Synthesis,self‐assembly,fluorescence, and thermosensitive properties of star‐shaped amphiphilic copolymers with porphyrin core

Star‐shaped amphiphilic poly(ε‐caprolactone)‐block‐poly(oligo(ethylene glycol) methyl ether methacrylate) with porphyrin core (SPPCL‐b‐POEGMA) was synthesized by combination of ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Star‐shaped PCL with porphyrin core (SPPCL) was prepared by bulk polymerization of ε‐caprolactone (CL) with tetrahydroxyethyl‐terminated porphyrin initiator and tin 2‐ethylexanote (Sn(Oct)₂) catalyst. SPPCL was converted into SPPCLBr macroinitiator with 2‐bromoisobutyryl bromide. Star‐shaped SPPCL‐b‐POEGMA was obtained via ATRP of oligo(ethylene glycol) methyl ether methacrylate (OEGMA). SPPCL‐b‐POEGMA can easily self‐assemble into micelles in aqueous solution via dialysis method. The formation of micellar aggregates were confirmed by critical micelle formation concentration, dynamic light scattering, and transmission electron microscopy. The micelles also exhibit property of temperature‐induced drug release and the lower critical solution temperature (LCST) was 60.6 °C. Furthermore, SPPCL‐b‐POEGMA micelles can reversibly swell and shrink in response to external temperature. In addition, SPPCL‐b‐POEGMA can present obvious fluorescence. Finally, the controlled drug release of copolymer micelles can be achieved by the change of temperatures. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Inversion of Supramolecular Helicity in Oligo‐p‐phenylene‐Based Supramolecular Polymers: Influence of Molecular Atropisomerism

The helical organization of oligo‐p‐phenylene‐based organogelators has been investigated by atomic force microscopy, circular and vibrational circular dichroism, and Raman techniques. Whilst OPPs with more than two phenyl rings in the core self‐assemble into left‐handed helices, that with a biphenyl core shows an inversion of the supramolecular helicity depending on the formation conditions through the atropisomerism of the biphenyl central unit. The results presented herein outline a new example of kinetically controlled modulation of supramolecular helicity.     

Stability and Drug Loading of Spontaneous Vesicles of Comb‐Like PEG Derivates

A novel comb‐like derivative CPEG‐g‐cholesterol was prepared by the reaction of cholesteryl chloroformate with hydroxyl groups of CPEG. The TEM and SEM results showed that CPEG‐cholesterol spontaneously aggregated vesicles with the membrane thickness of 4.27 ± 0.48 nm. Compared with the vesicles formed by comb‐like PEG (CPEG), the derivation of cholesteryl chloroformate increased the thickness of vesicle membrane and developed corrugations. The hydrophobic doxorubicin (Dox) was added into the solution of CPEG and CPEG‐g‐cholesterol to test their vesicle stability. The drug‐loaded vesicles of CPEG‐g‐cholesterol still existed but those of CPEG disappeared, which indicated that stability of vesicles was enhanced by the derived cholesteryl chloroformate. The vesicles were further cross‐linked by the reaction between divinyl sulfone (DVS) and the hydroxy groups in the side chains of the CPEG and CPEG‐g‐cholesterol. Both cross‐linked vesicles of CPEG and CPEG‐g‐cholesterol entrapped considerable hydrophobic Dox in the vesicles membrane. The spontaneous vesicles of CPEG‐g‐cholesterol and the crosslinked vesicles of CPEG and CPEG‐g‐cholesterol might have great potential as a cargo of the hydrophobic drug.