DSC investigation of isothermal bulk copolymerization of alkylaryl methacrylates

The free radical copolymerization of phenyl methacrylate (PhMA) witho-methylphenyl-methacrylate(o-MPhMA) ando-ethylphenyl methacrylate (o-EPhMA) was carried out and the enthalpies of copolymerization, overall rate constants and copolymerization parameters were determined for different molar ratios of comonomers in the temperature range 353–373 K.     

Random and block styrenic copolymers bearing both ammonium and fluorinated side‐groups

1H,1H,2H,2H‐Perfluorooctyloxymethylstyrene (FS) was prepared and copolymerized with chloromethylstyrene (CMS). Conventional radical copolymerization of both these aromatic monomers led to poly(CMS‐co‐FS) random copolymers for which CMS was shown to be more reactive than the fluorinated comonomer. Their controlled radical copolymerization based on degenerative transfer, namely iodine transfer polymerization (ITP), led to various poly(CMS)‐b‐poly(FS) block copolymers. Molecular weights of poly(CMS‐co‐FS) copolymers reached 33,000 g mol^?1 while those of poly(CMS)‐b‐ poly(FS) block copolymers were 22,000 g mol^?1. Their composition ranged from 18 to 61 mol.% in FS. These copolymers were modified via a cationization step, aiming at replacing the chlorine atom in CMS unit by a trimethylammonium group, leading to the formation of cationic sites. The resulting functionalized copolymers exhibited different solubilities. If both copolymerization techniques led to water‐insoluble copolymers, the block architecture enabled incorporating lower FS proportion, resulting in more cationic sites. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of novel alternating fluorinated copolymers bearing oligo(ethylene oxide) side chains

The synthesis and characterization of novel poly(CTFE‐g‐oligoEO) graft copolymers [chlorotrifluoroethylene (CTFE) and ethylene oxide (EO)] are presented. First, vinyl ether monomers bearing oligo(EO) were prepared by transetherification of ω‐hydroxyoligo(EO) with ethyl vinyl ether catalyzed by a palladium complex in 70–84% yields. Two vinyl ethers of different molecular weights (three and 10 EO units) were thus obtained. Then, radical copolymerization of the above vinyl ethers with CTFE led to alternating poly(CTFE‐alt‐VE) copolymers that bore oligo(OE) side chains in satisfactory yields (65%). These original poly(CTFE‐g‐oligoEO) graft copolymers were characterized by ¹H, ¹⁹F, and ¹³C NMR spectroscopy. Their molecular weights reached 19,000 g mol^?1, and their thermal properties were investigated while their glass transition temperatures ranged between ?42 and ?36 °C. Their thermogravimetric analyses under air showed decomposition temperatures of 270 °C with 10% weight loss (T_d,10%). These novel copolymers are of potential interest as polymer electrolytes in lithium ion batteries, showing room temperature conductivities ranging from 4.49 × 10^?7 to 1.45 × 10^?6 S cm^?1 for unplasticized material. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,characterization, and bulk properties of amphiphilic copolymers containing fluorinated methacrylates from sequential copper‐mediated radical polymerization

The partly fluorinated monomers, 2,2,2‐trifluoroethyl methacrylate (3FM), 2,2,3,3,4,4,5,5‐octafluoropentyl methacrylate (8FM), and 1,1,2,2‐tetrahydroperfluorodecyl methacrylate (17FM) have been used in the preparation of block copolymers with methyl methacrylate (MMA), 2‐methoxyethyl acrylate (MEA), and poly(ethylene glycol) methyl ether methacrylate (PEGMA) by Atom Transfer Radical Polymerization. A kinetic study of the 3FM homopolymerization initiated with ethyl bromoisobutyrate and Cu(I)Br/N‐(n‐propyl)‐2‐pyridylmethanimine reveals a living/controlled polymerization in the range 80–110 °C, with apparent rate constants of 1.6 · 10⁻⁴ s⁻¹ to 2.9 · 10⁻⁴ s⁻¹. Various 3FM containing block copolymers with MMA are prepared by sequential monomer addition or from a PMMA macroinitiator in all cases with controlled characteristics. Block copolymers of 3FM and PEGMA resulted in block copolymers with PDI < 1.22, whereas block copolymers from 3FM and MEA have less controlled characteristics. The block copolymers based on MMA with 8FM and 17 FM have PDI's < 1.30. The glass transition temperatures of the block copolymers are dominated by the majority monomer, as the sequential monomer addition results in too short pure blocks to induce observable microphase separation. The thermal stability of the fluorinated poly((meth)acrylate)s in inert atmosphere is less than that of corresponding nonfluorinated poly((meth)acrylate)s. The presence of fluorinated blocks significantly increases the advancing water contact angle of thin films compared to films of the nonfluorinated poly((meth)acrylate)s. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8097–8111, 2008     

Copolymers of methyl methacrylate and fluoroalkyl methacrylates: Effects of fluoroalkyl groups on the thermal and optical properties of the copolymers

Fluoroalkyl methacrylates, 2,2,2‐trifluoroethyl methacrylate ( 1 ), hexafluoroisopropyl methacrylate ( 2 ), 1,1,1,3,3,3‐hexafluoro‐2‐methyl‐2‐propyl methacrylate ( 3 ), and perfluoro t‐butyl methacrylate ( 4 ) were synthesized. Homopolymers and copolymers of these fluoroalkyl methacrylates with methyl methacrylate (MMA) were prepared and characterized. With the exception of the copolymers of MMA and 2,2,2‐trifluoroethyl methacrylate ( 1 ), the glass transition temperatures (T_gs) of the copolymers were found to deviate positively from the Gordon‐Taylor equation. The positive deviation from the Gordon‐Taylor equation could be accounted for by the dipole–dipole intrachain interaction between the methyl ester group and the fluoroalkyl ester group of the monomer units. These T_g values of the copolymers were found to fit with the Schneider equation. The fitting parameters in the Schneider equation were calculated, and R² values, the coefficients of determination, were almost 1.0. The refractive indices of the copolymers, measured at 532, 633, and 839 nm wavelengths, were lower than that of PMMA and showed a linear relationship with monomer composition in the copolymers. 2 and MMA have a tendency to polymerize in an alternating uniform monomer composition, resulting in less light scattering. This result suggests that the copolymer prepared with an equal molar ratio of 2 and MMA may have useful properties with applications in optical devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4748–4755, 2008     

Synthesis and characterization of original alternated fluorinated copolymers bearing glycidyl carbonate side groups

A vinyl ether bearing a carbonate side group (2‐oxo‐1,3‐dioxolan‐4‐yl‐methyl vinyl ether, GCVE) was synthesized and copolymerized with various commercially available fluoroolefins [chlorotrifluoroethylene (CTFE), hexafluoropropylene (HFP), and perfluoromethyl vinyl ether (PMVE)] by radical copolymerization initiated by tert‐butyl peroxypivalate. Although HFP, PMVE, and vinyl ether do not homopolymerize under radical conditions, they copolymerized easily yielding alternating poly(GCVE‐alt‐F‐alkene) copolymers. These alternating structures were confirmed by elemental analysis as well as ¹H, ¹⁹F, and ¹³C NMR spectroscopy. All copolymers were obtained in good yield (73–85%), with molecular weights ranging from 3900 to 4600 g mol^?1 and polydispersities below 2.0. Their thermogravimetric analyses under air showed decomposition temperatures at 10% weight loss (T_d,10%) in the 284–330°C range. The HFP‐based copolymer exhibited a better thermal stability than those based on CTFE and PMVE. The glass transition temperatures were in the 15–65°C range. These original copolymers may find potential interest as polymer electrolytes in lithium ions batteries. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of solid alkaline fuel cell binders based on fluorinated poly(diallyldimethylammonium chloride)s [poly(DADMAC)] or poly(chlorotrifluoroethylene‐co‐DADMAC) copolymers

A membrane or an electrode binder to be used in a solid alkaline fuel cell (SAFC) needs to (i) be insoluble in both aqueous solutions and the required fuels, and (ii) exhibit an hydroxide ion conductivity. To achieve these goals, two pathways were employed: (i) one consists of the radical copolymerization of diallyldimethylammonium chloride (DADMAC) with chlorotrifluoroethylene (CTFE) while (ii) the other one is based on the counter‐ion exchange of a poly(DADMAC) by fluorinated anions. First, the radical copolymerization of CTFE with DADMAC under various experimental conditions was achieved in yields up to 85%, and DADMAC percentages in the copolymers were higher than those in the feed compositions. To obtain insoluble copolymers, high CTFE feed contents (>70 mol %) were required. The other route consisting in the partial replacement of the Cl^? counter‐ions in the water‐soluble poly(DADMAC) by bistrifluoromethanesulfonimide (TFSI^?) did confer the starting material insolubility in water while maintaining its conductivity. When the fluorinated poly(DADMAC) was obtained from concentrated solutions of fluorinated surfactant, it was observed that the amount of counter‐ions exchanged was difficult to control, which limits optimization. Nevertheless, under diluted conditions, membranes with ion exchange capacity up to 0.7 meq g^?1, and conductivities close to 1 mS cm^?1 were obtained. Although their conductivities were low, these membranes fulfill the requirements for a SAFC membrane in terms of solubility in DMSO, water insolubility, and thermal stability (T_d,10% > 320 °C). When used in a fuel cell, as a binder in the membrane‐electrode assembly (MEA), significant improvements were noted (+50% of the open circuit voltage, +580% in current density, and +540% in accessible power). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2043–2058, 2009     

Effects of 2‐hydroxyalkyl methacrylates on the styrene miniemulsion polymerizations stabilized by SDS and alkyl methacrylates

The effects of 2‐hydroxyalkyl methacrylates (HEMA and HPMA) on the styrene miniemulsion polymerizations stabilized by SDS/lauryl methacrylate (LMA) or SDS/stearyl methacrylate (SMA) were investigated. A mixed mode of particle nucleation (monomer droplet nucleation and homogeneous nucleation) is operative during polymerization. Homogeneous nucleation plays a crucial role in the polymerizations stabilized by SDS/LMA, whereas monomer droplet nucleation becomes more important in the polymerizations stabilized by SDS/SMA. The polymerization kinetics is insensitive to the type of 2‐hydroxyalkyl methacrylates, but the difference in the relative importance of monomer droplet nucleation and homogeneous nucleation is detected. Incorporation of 1‐pentanol (C₅OH) into the reaction mixture also shows a significant influence on the polymerizations stabilized by SDS/LMA or SDS/SMA. This is attributed to the formation of a close‐packed structure of SDS and C₅OH on the droplet surface, which acts as a barrier to the incoming oligomeric radicals. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3188–3199, 2000     

Synthesis and optical properties of white phosphorescent carbazole - iridium copolymers

A series of novel carbazole-iridium copolymers have been designed and synthesized by the combination of blue-emitting acrylate carbazole M1 with hole transporting property and yellow-emitting cyclometalated iridium complex M2 containing 2-phenylpyridine as main ligand and acrylic acid as auxiliary ligand. The results showed that the blue carbazole host resulted in an efficient energy transfer to the yellow iridium complex guest, and when the feed molar ratio of M1 to M2 was 99:1, the emission spectrum of the copolymer presented a broad peak emission which can cover the whole visible range from 400 to 700 nm to obtain a nearly white copolymer material with the CIE coordinates of (0.30, 0.31), as a consequence of polymerized units luminescence, host-guest energy transfer and conjugation degree. Nevertheless, the host-guest energy transfer resulted in green emission about 524 nm of copolymer as the proportion of iridium complex monomer increased. The fluorescence quantum yields of the copolymers were significantly improved compared to the iridium complex monomer.     

Thermal degradation of copolymers based on selected alkyl methacrylates

The thermal stability and thermal degradation of copolymers based on selected alkyl methacrylates at temperatures between 250 and 400?°C have been studied using pyrolysis?Cgas chromatography. The type and composition of thermal degradation products gave useful information about the mechanism of pyrolysis of copolymers synthesized by using typical commercially available alkyl methacrylates. It was observed that the main thermal degradation products from alkyl methacrylate copolymers are monomers of alkyl methacrylates using by synthesis. Other pyrolysis by-products formed during thermal degradation were carbon dioxide, carbon monoxide, methane, ethane, methanol, ethanol, and propanol-1.     

全氟磺酰氟树脂热裂解的研究

全氟磺酰氟树脂是四氟乙烯和全氟3,6-二氧杂、4-甲基、7-辛烯磺酰氟(1)的共聚物(2):     

Dual‐curable fluorinated poly(methacrylate) copolymers for optical adhesives

In pursuit of photo‐curable adhesive for optical communication, dual‐curable acrylic oligomers (AOs) having alkoxy silane group, fluorine atoms and vinyl group as a pendent group were synthesized by two‐stage reactions. The isocyanate group containing oligomers were firstly synthesized via radical polymerization of acrylic monomers, and followed by urethane reaction with 2‐hydroxy ethyl methacrylate. The dual curing behaviors, e.g. thermal and photo‐cure, were studied by using photo‐differential scanning calorimetry (DSC) and real‐time IR. An optimum adhesive formulation, based on AO (15 g), epoxy acrylate (80 g), isobonyl methacrylate (17 g) and photo‐initiator (3 g), was obtained. As the content of AO was increased in the optical adhesive formulation, refractive index decreased but transmittance increased due to the increase in fluorine content. The optical transmittance at the range of 1.3 to 1.55 μm was higher than 90%. The addition of colloidal silica with the earlier mentioned formulation was helpful in decreasing crosslinking volume shrinkage and the increasing of glass fiber adhesion. The required properties for the optical adhesive, including chemical resistance and thermal resistance, dimension stability, etc. were also investigated. Copyright © 2005 John Wiley & Sons, Ltd.     

Thermal degradation of copolymers of 2-hydroxyethyl methacrylate and alkyl methacrylates

Thermal degradation of homopolymers of ethyl methacrylate (I), n-butyl methacrylate (II), 2-hydroxyethyl methacrylate (III), and copolymers of III with I and II were carried out by thermal volatilization analysis (TVA) up to 440°C with subsequent subambient thermal volatilization analysis (SATVA). An on-line mass spectrometry coupled with TVA and SATVA was employed to identify the products of thermal degradations. Isothermal pyrolyses of the polymers were carried out separately at 400°C in vacuum for 30 min and the liquid products of decomposition were collected and analysed by gas chromatography. The relationship between the amounts of I and II obtained from pyrolysis and the amounts of these components actually present in the copolymer samples was determined. Also the amount of III and ethyleneglycol dimethacrylate obtained from pyrolysis increases with the amount of III in the copolymer. The polymers were also characterized by differential thermal analysis.     

Energy transfer in luminescent complexes of EuIII and TbIII with homo- and copolymers of acrylic acid and alkyl methacrylates

The influence of the composition and structure of a macromolecular ligand on the efficiency of energy transfer in complexes of Eu^III and Tb^III with ligands based on acrylic acid has been studied. It has been found that a decrease in the size of an alkyl group of methacrylic esters and a low content of acrylic moieties of Eu^III complexes with copolymers increase the efficiency of Eu^III concentration quenching. Insertion of noncoordinative alkyl methacrylate into the polymeric chain results in an increase in the efficiency of energy transfer from Tb³⁺ to Eu³⁺.Translated fromIzvestiya Akademii Nauk. Seriya Klrimicheskaya, No. 6, pp. 1425–1428, June, 1996.     

Thermal studies of copolymers of acrylonitrile with haloalkyl acrylates and methacrylates

Thermal behaviour of copolymers of acrylonitrile containing 2–15 mol% of halogen substituted alkyl acrylates and methacrylates was studied by differential scanning calorimetry and thermogravimetry (TG) under nitrogen atmosphere. It was observed that incorporation of haloalkyl acrylates or methacrylates in polyacrylonitrile decreases the second order transition and does not affect the extent of nitrile oligomerization but the oligomerization is delayed. TG analysis of the copolymers revealed that the threshold decomposition temperatures of these copolymers are ≥260° as compared to 248° for pure polyacrylonitrile. The residue at 850° was less for the copolymers and it further decreases with increase in the comonomer concentration.     

Thermogravimetric analysis of poly(alkyl methacrylates) and poly(methylmethacrylate-g-dimethyl siloxane) graft copolymers

The thermal stabilities of various poly(alkyl methacrylate) homopolymers and poly(methyl methacrylate-g-dimethyl siloxane) (PMMA-g-PSX) graft copolymers have been determined by thermogravimetric analysis (TGA). As expected, the thermal stabilities of poly(alkyl methacrylates) were a function of the ester alkyl group, and polymerization mechanism. In particular, thermally labile linkages, which result from termination during free radical or nonliving polymerization mechanisms, decrease the ultimate thermal stabilities of the polymers. However, graft copolymers, which were prepared by the macromonomer technique with free radical initiators, exhibited enhanced thermal stability compared to homopolymer controls. A more complex free radical polymerization mechanism for the macromonomer modified polymerization may account for this result. © 1994 John Wiley & Sons, Inc.     

The influence of alkylene spacers on conformational and thermal properties of poly (aryl methacrylates)

The effect of introducing alkylene spacers on the thermal and conformational properties of poly(aryl methacrylates) has been studied. Poly(2-phenylethyl-1-methacrylate) (PPEMA) and poly(4-phenylbutyl-1-methacrylate) (PPBMA) samples of narrow poly-dispersities and covering a very broad range of molecular weights were produced by free radical solution polymerization, followed by fractionation. These materials were studied by a combination of differential scanning calorimetry, light scattering, and viscometry measurements to allow evaluation of their glass transition temperatures (T_g) and characteristic ratios (C_∞). These results are compared with literature data available for poly(phenyl methacrylate) (PPMA), which has no alkylene spacer, and poly(benzylmethacrylate) (PBMA), which has a methylene spacer. A progressive decrease in T_g is observed as the length of the alkylene spacer is increased, reflecting the enhancement of side group (local) flexibility. C_∞ decreases substantially on going from PPMA to PBMA but then increases on going to PPEMA and PPBMA. This behavior is attributed to the fact that while side group flexibility increases for the materials with longer alkylene spacers, and this would be expected to decrease C_∞, the side group size is progressively increasing. Larger side groups generally increase C_∞ of polymethacrylates. Thus the observed C_∞ behavior for these polymers reflects both the size and flexibility of the substituents. © 1994 John Wiley & Sons, Inc.     

A fluorine-containing hydrophobically associating polymer. I. Synthesis and solution properties of copolymers of acrylamide and fluorine-containing acrylates or methacrylates

Fluorine-containing hydrophobically associating polymers have been synthesized by copolymerization of acrylamide with a small amount of an acrylate or methacrylate having a fluorocarbon containing ester group. It was found that hydrophobic associations occurring between these fluorocarbon chains was stronger than the interactions of the corresponding hydrocarbon comonomers and depend on the length of the fluorocarbon chain. The rheological properties of the copolymer solutions were studied. The solutions were found to be highly pseudoplastic but the viscosity loss was completely reversible upon removal of shear. Evidence for hydrophobic association of the fluorocarbon groups was obtained by the dependence of the Brookfield viscosity on temperature, the addition of NaCl, and the addition of organic solvents, urea, and surfactants.     

Thermal behaviour of copolymers of acrylonitrile with haloalkyl acrylates or methacrylates

Thermal stabilities of copolymers of acrylonitrile with 4–14 mol% of 3-chloro-2-hydroxypropyl acrylate or methacrylate, 2-chloroethyl acrylate or methacrylate and 2-bromoethyl acrylate or methacrylate were studied by TGA in air. A two-step degradation between 300 and 350° and 600 and 650° is observed for both PAN and the copolymers. Initially, the degradation is slow up to 350° for the copolymers (8–23% wt loss) compared with PAN (27% wt loss); the trend reverses after 350°. A mechanism of the degradation has been proposed on the basis of i.r. studies of the residue of the copolymers isothermally heated at 300° for 10 min. The influence of the haloalkyl comonomers on the flammability of acrylic copolymers in terms of limiting oxygen index is also reported.