Syntheses of pyrimidine‐based polymers containing electron‐withdrawing substituent with high open circuit voltage and applications for polymer solar cells

Polymers using new electron‐deficient units, 2‐pyriminecarbonitrile and 2‐fluoropyrimidine, were synthesized and utilized for the photovoltaics. Donor‐acceptor (D‐A) types of conjugated polymers ( PBDTCN, PBDTTCN, PBDTF, and PBDTTF ) containing 4,8‐bis(2‐octyldodecyloxy)benzo[1,2‐b;3,4‐b′]dithiophene (BDT) or 4,8‐bis(5‐(2‐octyldodecyloxy)thiophen‐2‐yl)benzo[1,2‐b:4,5‐b′]dithiophene (BDTT) as electron rich unit and 2‐pyriminecarbonitrile or 2‐fluoropyrimidine as electron deficient unit were synthesized. We designed pyrimidine derivatives in which strong electron‐withdrawing group (C?N or fluorine) was introduced to the C2 position for the generation of strong electron‐deficient property. By the combination with the electron‐rich unit, the pyrimidines will provide low band gap polymers with low highest occupied molecular orbital (HOMO) energy levels for higher open‐circuit voltages (V_OC). For the syntheses of the polymers, the electron‐rich and the electron‐deficient units were combined by Stille coupling reaction with Pd(0)‐catalyst. Absorption spectra of the thin films of PBDTTCN and PBDTTF with BDTT unit show shift to a longer wavelength region than PBDTCN and PBDTF with BDT unit. Four synthesized polymers provided low electrochemical bandgaps of 1.56 to 1.96 eV and deep HOMO energy levels between ?5.67 and ?5.14 eV. © 2015 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 771–784     

Proton conducting polymers containing 1H‐1,2,3‐triazole moieties

Polyacrylates containing a different number of 1H‐1,2,3‐triazole groups per repeat unit have been synthesized via conventional free radical polymerization. These polymers were characterized by nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Proton conductivity measurements were made using impedance spectroscopy. Introduction of more than one triazole per repeat unit did not result in an increase in conductivity as there was an accompanying increase in glass transition temperature (T_g). A maximum conductivity of 17.5 μS/cm was obtained at 200 °C under anhydrous condition. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 188–196, 2009     

Polyaniline copolymers with solvent‐mimic side chains

We investigated new polyaniline copolymers with solvent‐mimic side chains for enhanced processability in various solvents. The solvent‐mimic side chains, benzyloxypropoxy (BOP), phenoxybutoxy (POB), and dihydroxypropoxy (DHP), were introduced into copolymers and used with nonpolar aromatic and polar alcoholic solvents, respectively. Compared to a polyaniline homopolymer, polyaniline copolymers with a small amount of side chains (<4 mol %) exhibit different physical properties, including film‐forming ability. This can be attributed to the solvent‐mimic side chains strongly interacting with the solvent and/or the polyaniline backbone. Especially, in nonpolar aromatic solvents, polyaniline copolymers with nonpolar aromatic BOP and POB side chains exhibit good film‐forming ability leading to high electrical conductivity, while the polyaniline homopolymer did not form a film. Therefore, introducing solvent‐mimic side chains in conducting polymers is a very attractive method of enhancing their processability and physical properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1986–1995     

Reversible Wettability Switching of Polyaniline‐Coated Fabric,Triggered by Ammonia Gas

A superhydrophobic polyaniline (PANI)‐coated fabric was prepared by in‐situ doping polymerization in the presence of perfluorosebacic acid (PFSEA) as the dopant. It is found that the PANI‐coated fabric undergoes a change in wettability from superhydrophobic (doped state) to superhydrophilic (de‐doped state) when it is exposed to ammonia gas. In particular, a reversible wettability of the PANI‐fabric is observed when it is doped with PFSEA and de‐doped with ammonium gas. It is proposed that the coordination effect of the pore structure of the polyester fabric, low surface energy of the PFSEA dopant, and reversible doping/dedoping characteristics of PANI results in the reversible wettability of the PANI‐coated fabric from superhydrophobicity to superhydrophilicity. Moreover, the tactic used here may provide a new method to monitor the toxic gas.

     

Syntheses of conductive adhesives based on epoxy resin and polyanilines by using N‐tert‐butyl‐5‐methylisoxazolium perchlorate as a thermally latent curing reagent

Conductive composites consisted of epoxy resin and polyanilines (PANIs) doped with dodecylbenzenesulfonic acid ( 1 ), dodecylsulfonic acid (2), di(2‐ethylhexyl)sulfosuccinic acid (3), and HCl were synthesized by use of N‐tert‐butyl‐5‐methylisoxazolium perchlorate (5) under various reaction conditions. It was found that the composites with PANI doped with acid 2 (PANI‐2) prepared by curing with 10 mol % of reagent 5 at 80 °C for 12 h showed high electroconductivity along with the low conducting percolation threshold (3 wt % of PANI‐2). Furthermore, the composite with even ?10 wt % of PANI‐2 exhibited ?10^?1 S/cm of electroconductivity. The UV–vis and IR measurements indicated that the conductive emeraldine salt form of PANI‐2 in the composite was maintained after the curing reaction. The thermal stability was studied by TGA and DSC measurements, and then, the T_d10 and T_g of the composite with 5 and 10 wt % of PANI‐2 were found to be similar to those with the cured epoxy resin itself. In addition, the similar investigation with an oxetane resin instead of the epoxy resin was also carried out. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 718–726, 2006     

A novel approach for preparation of conductive hybrid elastomeric nano‐composites

Since the discovery of carbon nanotubes (CNTs) and intrinsically conductive polymers, such as polyaniline (PANI) some research has focused on the development of novel hybrid materials by combining CNT and PANI to achieve their complementary properties. Electrically conductive elastomer nano‐composites containing CNT and PANI are described in the present investigation. The synthesis procedure includes in‐situ inverse emulsion polymerization of aniline doped with dodecylbenzene sulfonic acid in the presence of CNT and dissolved styrene‐isoprene‐styrene (SIS) block copolymer, followed by a precipitation–filtration step. The synthesis step is carried out under ultrasonication. The resulting uniform SIS/CNT/PANI dispersions are stable for long time durations. The incorporation of CNT/PANI in the SIS elastomeric matrix improves thermal, mechanical and electrical properties of the nano‐composites. The formation of continuous three‐dimensional CNT/PANI network, assumed to be responsible for enhancement of the resulting nano‐composite properties, is observed by HRSEM. A relatively low percolation threshold of 0.4 wt.% CNT was determined. The Young's modulus of the SIS/CNT/PANI significantly increases in the presence of CNT. High electrical conductivity levels were obtained in the ternary component systems. Copyright © 2013 John Wiley & Sons, Ltd.     

Acceptor–acceptor conjugated copolymers based on perylenediimide and benzothiadiazole for all‐polymer solar cells

Donor–acceptor (D–A) conjugated copolymers are one of known classes of organic optoelectronic materials and have been well developed. However, less attention has been paid on acceptor–acceptor (A–A) conjugated analogs. In this work, two types of A–A conjugated copolymers, namely P1‐Cn and P2‐Cn (n is the carbon number of their alkyl side chains), were designed and synthesized based on perylenediimide ( PDI ) and 2,1,3‐benzothiadiazole ( BT ). Different from P1‐Cn , P2‐Cn polymers have additional acetylene π‐spacers between PDI and BT and thus hold a more planar backbone configuration. Property studies revealed that P2‐Cn polymers possess a much red‐extended UV–vis absorption spectrum, stronger π–π interchain interactions, and one‐order larger electron mobility in their neat film state than P1‐Cn . However, all‐polymer solar cells using P1‐Cn as acceptor component and poly(3‐hexyl thiophene) or poly(2,7‐(9,9‐didodecyl‐fluoene)‐alt?5,5′‐(4,7‐dithienyl‐2‐yl‐2,1,3‐benzothiadiazole) as donor component exhibited much better performance than those based on P2‐Cn . Apart from their backbone chemical structure, the side chains were found to have little influence on the photophysical, electrochemical, and photovoltaic properties for both P1‐Cn and P2‐Cn polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1200–1215     

Polyurethane/polyaniline and polyurethane‐poly(methyl methacrylate)/polyaniline conductive core‐shell particles: Preparation,morphology, and conductivity

Polyurethane/polyaniline (PU/PANI) and polyurethane‐poly(methyl methacrylate)/polyaniline (PU‐PMMA/PANI) conductive core‐shell particles were synthesized by a two‐stage polymerization process. The first stage was to produce a core of PU or PU‐PMMA via miniemulsion polymerization using sodium dodecyl sulfate (SDS) as the surfactant. The second stage was to synthesize the shell of polyaniline over the surface of core particles. Hydrogen chloride (HCl) and dodecyl benzenesulfonic acid (DBSA) were used as the dopant agents. Ammonium persulfate (APS) was used as the oxidant for the polymerization of ANI. Different concentrations of HCl, DBSA, and SDS would cause different conformations of PANI chains and thus different morphologies of PANI particles. UV–visible spectra revealed that the polaron band was blue‐shifted because of the more coiled conformation of PANI chains by increasing the concentration of DBSA. Besides, with a high concentration of DBSA, both spherical‐ and rod‐shape PANI particles were observed by transmission electron microscope, and the coverage of PANI particles onto the core surfaces was improved. The key point of formation of rod‐type PANI particles was that DBSA was served with a high concentration accompanied with the existence of HCl or SDS. The better coverage of PANI particles over the core surfaces by charging higher DBSA concentrations resulted in a higher conductivity of hybrid particles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3902–3911, 2007     

Benzo[2,1‐b;3,4‐b′]dithiophene‐based low‐bandgap polymers for photovoltaic applications

The synthesis of four alternating copolymers using benzo[2,1‐b;3,4‐b′]dithiophene (BDP) as the common donor unit is presented. Before the synthesis, theoretical calculations that we performed predicted that the incorporation of BDP, which consists of fused dithiophene units with a benzene ring, into these polymers would produce a low‐lying highest occupied molecular orbital (HOMO) energy level. Low‐lying HOMO levels are desirable to produce high open circuit voltages (V_OC) in organic bulk heterojunction (BHJ) photovoltaic devices. The polymers' structural characterization, as well as the preliminary results of their performance in BHJ devices, using (6,6)‐phenyl C₆₁‐butyric acid methyl ester as the electron acceptor, is presented. The V_OC values follow the expected trend: increasing with decreasing HOMO level of the polymer. High V_OC values of 0.81 and 0.82 V have been obtained from two polymers: PBDPBT and PBDPDPP. The initial power conversion efficiency achieved in these unoptimized devices was 1.11% because of relatively low J_SC values. The variation observed in the J_SC values between the four polymers is discussed. Device performance is expected to increase with optimization of processing conditions for the devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Dithieno[2,3‐d:2',3'‐d']benzo[1,2‐b:4,5‐b']dithiophene (DTBDAT)‐based copolymers for high‐performance organic solar cells

P(BDT‐TCNT) and P(DTBDAT‐TCNT) , which has an extended conjugation length, were designed and synthesized for applications in organic solar cell (OSCs). The solution absorption maxima of P(DTBDAT‐TCNT) with the extended conjugation were red‐shifted by 5–15 nm compared with those of P(BDT‐TCNT) . The optical band gaps and highest occupied molecular orbital (HOMO) energy levels of both P(BDT‐TCNT) and P(DTBDAT‐TCNT) were similar. The structure properties of thin films of these materials were characterized using grazing‐incidence wide‐angle X‐ray scattering and tapping‐mode atomic force microscopy, and charge carrier mobilities were characterized using the space‐charge limited current method. OSCs were formed using [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) as the electron acceptor and 3% diphenylether as additive suppress aggregation. OSCs with P(BDT‐TCNT) as the electron donor exhibited a power conversion efficiency (PCE) of 4.10% with a short‐circuit current density of J_SC = 9.06 mA/cm², an open‐circuit voltage of V_OC = 0.77 V, and a fill factor of FF = 0.58. OSCs formed using P(DTBDAT‐TCNT) as the electron donor layer exhibited a PCE of 5.83% with J_SC = 12.2 mA/cm², V_OC = 0.77 V, and FF = 0.62. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3182–3192     

Synthesis of soluble poly(para‐phenylene) with a long polymer chain: Characteristics of regioregular poly(1,4‐phenylene)

Soluble poly(para‐phenylene) having a long polymer chain (more than six repeat units) was synthesized with a tert‐butyl end‐group (t‐PPP) and was found to have improved solubility and excellent optical properties. Poly(1,3‐cyclohexadiene) (PCHD) consisting of only 1,4‐cyclohexadiene (1,4‐CHD) units was synthesized with a tert‐butyl end‐group (t‐PCHD), and completely dehydrogenated to obtain t‐PPP. This end‐group effectively prevented the crystallization of t‐PPP, and polymers containing up to 16 repeat units were soluble in tetrahydrofuran. Soluble t‐PPP obtained had an ability to form a tough thin film prepared by spin‐coating method. Optical analyses of t‐PPP provided strong evidence for a linear polymer chain structure. A block copolymer of t‐PPP and a soluble polyphenylene (PPH) was then synthesized, and the excellent optical properties were retained by this block copolymer along with its solubility. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5223–5231, 2008     

Synthesis of medium‐bandgap π‐Conjugated polymers based on isomers of 5‐Alkylphenanthridin‐6(5H)‐one and 6‐Alkoxylphenanthridine

Two novel dibromo monomers consisting of the isomers of 5‐alkylphenanthridin‐6(5H)‐one (PN) and 6‐alkoxylphenanthridine (PO) were synthesized through alkylation of the precursor 3,8‐dibromophenanthrindi‐6(5H)‐one, where the molecular structures were confirmed by NMR spectroscopy. The medium bandgap conjugated polymers PDBTPN and PDBTPO were constructed by utilizing such two isomers PN and PO as the electron‐donating units and dithiophenebenzo[2,1,3]diathiazole as the electron‐accepting unit. The resulting polymers exhibited analogous absorption profiles with optical bandgap of 1.90 eV, while PDBTPO showed slightly higher absorption coefficiency. Cyclic voltammetry measurements revealed that these polymers had relatively deep highest occupied molecular orbital levels of about ?5.70 eV. Polymer solar cells based on such two polymers showed relatively high open‐circuit voltage of about 0.90 V. All devices exhibited moderate performances with the best power conversion efficiency of 3.77% achieved based on PDBTPO. Devices based on PDBTPO showed slightly higher power conversion efficiency than those based on PDBTPN, which can be ascribed to higher hole mobility and more favorable film morphology of the former. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2119–2127     

Photovoltaic response to structural modifications on a series of conjugated polymers based on 2‐aryl‐2H‐benzotriazoles

The synthesis, characterization, and photovoltaic properties of a series of four conjugated polymers containing 2‐aryl‐2H‐benzotriazoles and “bis(thiopheno)dialkylfluorenes” is described. The polymers were obtained via Suzuki‐polycondensation and comprise alternating electron rich and electron poor building blocks. The impact of systematic structural changes on the electronic and morphological properties and device efficiencies were studied. Application of these polymers as light‐harvesting and electron‐donating materials in organic solar cells using PCBM derivatives as electron accepting materials resulted in power conversion efficiencies up to 1.8%. Both the properties of the pristine polymers and the device performance show that the impact of the substitution farther‐off the backbone is negligible while substitution directly on the backbone has a major impact. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Donor–acceptor‐structured naphtodithiophene‐based copolymers for organic thin‐film transistors

New donor–acceptor (D‐A) polymers, poly(4,5‐bis(2‐octyldodecyloxy)naphto[2,1‐b:3,4‐b']dithiophenebenzo[c][1,2,5]thiadiazole) (PNDT‐B) and poly(4,5‐bis(2‐octyldodecyloxy)naphto [2,1‐b:3,4‐b′]dithiophene‐4,7‐di(thiophen‐2‐yl)benzo[c][1,2,5]thiadiazole) (PNDT‐TBT), with the extended π‐electron delocalization of naphtho[2,1‐b:3,4‐b']dithiophene, were successfully synthesized by Suzuki and Stille coupling reactions. The structure and physical properties of polymers were characterized by DFT calculation, UV–vis absorption, cyclovoltammetry, TGA and DSC analyses. X‐ray diffraction studies indicated a relatively highly ordered intermolecular structure in PNDT‐TBT after annealing. This high degree of molecular order resulted from the crystallinity and increasing planarity, provided by the thiophene linker groups and the interdigitation of the long alkoxy side chains. The new D‐A polymer, PNDT‐TBT, exhibited a p‐type carrier mobility of 0.028 cm²/Vs and an on/off ratio of 5.9 × 10³. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 525–531     

Synthesis and electrochromic performance of oligoaniline‐containing polyureas capped with various functional groups

Tuning the molecular structure is an effective strategy to modulate the electrochromic behaviors of conducting polymers. In this contribution, a novel oligoaniline‐containing polyurea ended with reactable isocyanate groups is designed and synthesized via nucleophilic polymerization. Then various functional groups such as o‐toluidine, poly(ethylene glycol) (PEG), ethoxysilane, and congo red (CR) are introduced as end groups to modulate the electrochromic performance. Hydrophilic PEG could improve the switching speed due to the rapid electrolyte ions diffusion into polymer film through the hydrophilic region. An enhanced switching stability is afforded by crosslinkable ethoxysilane end groups, ascribed to crosslinked densified surface and great adhesion force between the electrochromic layer and ITO substrate through the hydrolysis reaction. Moreover, an ample color change is achieved by introducing colored CR as end groups. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 412–419     

A Template‐Free Method toward Urchin‐Like Polyaniline Microspheres

Urchin‐like PANI microspheres with an average diameter of 5–10 µm have been successfully prepared. Their surfaces consist of highly oriented nanofibers of ≈30 nm diameter and 1 µm length. The solvent composition plays an important role in the formation process of urchin‐like PANI microspheres. The structure of the products has been characterized by FT‐IR, UV‐vis, and XRD. To investigate the self‐assembly of urchin‐like PANI microspheres, the effect of polymerization time on the morphology of the products has been studied. The morphological evolution process indicates that the urchin‐like microspheres originate from the self‐assembly of nanoplates, which then grow into urchin‐like microstructures with nanofibers on the surface.

     

The preparation of polyaniline/polypyrrole conductive polymer films on polycarbonate‐coated Pt electrodes

In this study, free‐standing polymer films were obtained first with an electrochemical coating of polyaniline and then with a coating of polypyrrole on an insulating polycarbonate‐coated Pt electrode. The films contained varying amounts of polyaniline and polypyrrole obtained by varying the electrolysis time, and their conductivities were determined. The Raman spectra of the films taken from the electrode side were similar to those of pure polyaniline, whereas the spectra of the solution side were identical to those of pure polypyrrole. The resistance change in the films between −15 and +120°C revealed that the films were sensitive to temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 51–59, 2000     

Study on synthesis of poly(N‐isopropylacrylamide) grafted carbon black and temperature‐dependence conductivity of grafted carbon black/epoxy composites

Carbon black nanoparticle grafted with poly(N‐isopropylacrylamide) (CB‐g‐PNIPAAm) was synthesized by surface‐initiated atom transfer radical polymerization (SI‐ATRP). The temperature‐responsive behavior of CB‐g‐PNIPAAm was proved by temperature‐variable ¹H NMR. A temperature‐dependent conductive composite was prepared by blending CB‐g‐PNIPAAm with epoxy resin. The relationship between temperature and resistivity of the composite was studied: the composite exhibited a negative temperature coefficient (NTC) phenomenon. Possible mechanism for the NTC phenomenon was suggested. The results showed that resultant composites can be used in intelligent temperature‐switching. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1529–1535, 2008     

Spontaneous formation of hierarchical proton‐conductive structures in sulfonated poly(p‐phenylene terephthalamide) copolymer films

Two partially sulfonated copolymers of poly(p‐phenylene terephthalamide) were studied; the sulfonated diamine to nonsulfonated diamine ratios were x = 1 and x = 2. Polymer solutions in water demonstrated lyotropic liquid‐crystalline behavior, with the critical concentration for nematic phase formation being around 0.7 wt %. Films of these copolymers could be considered for fuel‐cell applications. The in‐plane proton conductivities were of the order of 10^?3 to 10^?2 S cm^?1 between 20 and 90 °C. Increasing the sulfonation level resulted in a more conductive material. Spontaneous alignment of the polymer occurred during film formation, as revealed by X‐ray diffraction. Scattering along the polymer backbone was observed perpendicular to the film, implying that the polymer chains were homeotropically aligned with respect to the film. The average degree of alignment was determined to be 0.66 and 0.77 for x = 1 and x = 2, respectively. Evidence of secondary layering within the plane of the film was seen in SEM images. These layers could provide a pathway for proton conduction to occur within the plane of the film. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 666–676, 2007     

Transparent conductive films based on polymer composites containing the mixed‐valence tetrathiafulvalene nanofibers

We report the facile preparation of the conductive polymer composites containing the mixed‐valence tetrathiafulvalene (TTF) nanofibers and their applications as all‐organic transparent conductive materials. TTF can be used as a nanofiller for transforming conventional polymers to conductive materials. Self‐assemble nanofibers of the neutral and radical cation of TTF can be formed in the polymer solutions during the film deposition, and the resulting composite films with several micron thickness can serve as the conductive material with high transparency. Several kinds of conventional polymers, such as polystyrene, poly(methyl methacrylate) (PMMA), and poly(vinylpyrrolidone), can be used as a polymer matrix of the composites. The conductivities of the PMMA film containing 35 mol % of the mixed‐valence TTF and the PEDOT–PSS film showed similar values (2.8 × 10^–2 and 5.4 × 10^–1 S/cm, respectively). In contrast, the normalized transmittance of the PMMA film by 1‐μm thickness greatly increased (96%/μm) when compared with that of the PEDOT–PSS film (10%/μm). In addition, the degradation of the conductivity of the nanofibers by heating and aging was effectively suppressed in the composite samples. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6441–6450, 2009