Covalent functionalization of multi-walled carbon nanotubes by lipase

Lipase from Candida rugosa was covalently anchored onto acid-treated multi-walled carbon nanotubes (MWNTs) through a self-catalytic mechanism. A variety of characterization techniques including FTIR, Raman spectroscopy, and XPS were employed to demonstrate the formation of the ester linkage between lipase and MWNTs. The MWNTs-lipase biocomposites showed significantly increased solubility in some common-used organic solvents, such as THF, DMF and chloroform. This study may offer a novel and facile route for covalent modification of carbon nanotubes, and expand the potential utilization of both lipases and MWNTs in the fields of biocatalyst and biosensor.     

Synthesis,characterization, and electrochemical properties of imidazole derivatives functionalized single‐walled carbon nanotubes

The imidazole derivatives functionalized single‐walled carbon nanotubes (SWNTs) were synthesized by a diazonium‐based reaction. We have designed and synthesized two imidazole derivatives to modify SWNTs. The resulting products were characterized by Fourier transform infrared (FT‐IR) spectroscopy, Raman spectroscopy, ultraviolet visible (UV/Vis) spectroscopy, thermo gravimetric analysis (TGA), energy dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), and atomic force microscopy (AFM). Electrochemical measurements via a cyclic voltammetry method revealed that the weak intramolecular electronic interactions presented between the attached imidazole derivatives groups and the nanotubes. Copyright © 2008 John Wiley & Sons, Ltd.     

Transparent and flexible field emission display device based on single‐walled carbon nanotubes

A fully transparent and flexible field emission device (FED) has been demonstrated. Single‐walled carbon nanotubes (SWCNTs) coated on arylite substrate were used as electron emitters for the FED and a novel metavanadate phosphor coated on the SWCNTs/arylite film was used as transparent and flexible screen. The SWCNTs/arylite based emitters and the SWCNTs/arylite/metal‐vanadate‐based phosphor showed a transmittance value of 92.6% and 54%, respectively. The assembled device also showed satisfactory transparency and flexibility as well as producing significant current. Metavanadate phosphor is considered to be an excellent candidate due to its superior luminescence properties and easy fabrication onto transparent and flexible conductive substrate at room temperature while retaining reasonable transparency of the substrate. Thus, its transparency and flexibility will open the door to next‐generation FEDs. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Temperature‐dependent magneto‐photoluminescence spectroscopy of carbon nanotubes: evidence for dark excitons

We review recent experimental and theoretical studies on the radiative properties of excitons in single‐walled carbon nanotubes (SWNTs) as a function of magnetic field and temperature. These studies not only provide new insight into the fundamental properties of excitons in the ultimate one‐dimensional (1D) limit but also reveal new phenomena associated with the unique crystal and electronic structure of SWNTs. During the past several years, SWNTs have emerged as one of the most ideal systems available for the systematic study of 1D excitons, which are predicted to possess a set of properties that are distinctly different from excitons in higher dimensions. In addition, their tubular nature allows them to exhibit non‐intuitive quantum phenomena when subjected to a parallel magnetic field, which breaks time reversal symmetry and adds an Aharonov‐Bohm phase to the electronic wavefunction. In particular, a series of recent experiments demonstrate that such a symmetry‐breaking magnetic field can dramatically “brighten” an optically‐inactive, or dark, exciton state at low temperature (see the title figure on the right). We show that this phenomenon, magnetic brightening, can be understood as a consequence of interplay between the strong intervalley Coulomb mixing and field‐induced lifting of valley degeneracy. Detailed temperature‐dependent photoluminescence studies of excitons in SWNTs in a varying magnetic field have thus provided one of the most critical tests for recently proposed theories of 1D excitons taking into account the strong 1D Coulomb interactions and unique band structure on an equal footing. Furthermore, results of these studies suggest the intriguing possibility of manipulating the optical properties of SWNTs by judicious symmetry control, which can lead to novel devices and applications in lasers and optoelectronics.     

Changes in the vibrational modes of carbon nanotubes induced by electron‐beam irradiation: resonance Raman spectroscopy

Influence of electron‐beam (e‐beam) irradiation on multi‐walled (MW) and single‐walled (SW) carbon nanotube films grown by microwave chemical vapor deposition technique is investigated. These films were subjected to an e‐beam energy of 50 keV from a scanning electron microscope for 2.5, 5.5, 8.0, and 15 h, and to 100 and 200 keV from a transmission electron microscope for a few minutes to ∼2 h continuously. Such conditions resemble an increased temperature and pressure regime enabling a degree of structural fluidity. To assess structural modifications, they were analyzed prior to and after irradiation using resonance Raman spectroscopy (RRS) in addition to in situ monitoring by electron microscopy. The experiments showed that with extended exposures, both types of nanotubes displayed various local structural instabilities including pinching, graphitization/amorphization, and formation of an intramolecular junction (IMJ) within the area of electron beam focus possibly through amorphous carbon aggregates. RRS revealed that irradiation generated defects in the lattice as quantified through (1) variation of the intensity of radial breathing mode (RBM), (2) intensity ratio of D to G band (I_D/I_G), and (3) positions of the D and G bands and their harmonics (D* and G*) and combination bands (D + G). The increase in the defect‐induced D band intensity, quenching of RBM intensity, and only a slight increase in G band intensity are some of the implications. The MW nanotubes tend to reach a state of saturation for prolonged exposures, while the SW ones transform from a semiconducting to a quasi‐metallic character. Softening of the q = 0 selection rule is suggested as a possible reason to explain these results. Furthermore, these studies provide a contrasting comparison between MW and SW nanotubes. Copyright © 2006 John Wiley & Sons, Ltd.     

Evaluation of crystalline perfection degree of multi‐walled carbon nanotubes: correlations between thermal kinetic analysis and micro‐Raman spectroscopy

Commercially available and laboratory‐prepared multi‐walled carbon nanotubes (MWCNTs) are systematically investigated by the use of micro‐Raman spectroscopy (MRS), thermogravimetric analysis (TGA) and complementary techniques (scanning electron microscopy (SEM) and transmission electron microscopy (TEM)) with the aim of establishing a standardised post‐growth diagnostic protocol for the assessment of their overall crystalline quality. By studying a set of ‘reference’ samples, clear correlations are evidenced between the Raman graphitisation indexes (D/G, G′/G and G′/D intensity ratios) commonly adopted to describe the crystalline arrangement of nanotubes, and their reactivity towards oxygen, as measured by the apparent activation energy needed for their oxidation, inferred from the kinetic analysis in quasi‐isothermal conditions. The higher the crystalline perfection degree, the higher the energy needed for oxidising them. The efficacy of the found correlations in indirectly assessing the reactivity of nanotubes prepared under different conditions is successfully demonstrated by the use of a second set of samples. The physical meaning and range of validity of the shown correlations are further discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Plasmon‐enhanced Raman scattering by suspended carbon nanotubes

We report plasmon‐enhanced Raman scattering of the order of 10³ by a metallic carbon nanotube partially suspended inside a near‐field cavity. The tube is part of a small bundle, and is interfaced with an Au nanodisc dimer using a recently developed assembly scheme based on dielectrophoretic deposition. Spatially resolved Raman measurements with two excitation wavelengths and two orthogonal polarizations confirm that the enhancement arises from a 65 nm long suspended tube segment. We show that the orientation of the tube inside the cavity can be as effective for generating enhancement as placing the nanotube precisely in a plasmonic hotspot. Position and shape of the G‐peak show that the suspended part of the tube is free of strain and doped with a Fermi energy shift ≤40 meV. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Raman evidence of the interaction between multiwalled carbon nanotubes and nanostructured TiO2

Nanocomposites of carbon nanotubes and titanium dioxide (TiO₂) have attracted much attention due to their photocatalytic properties. Although many examples in the literature have visualized these nanocomposites by electron microscopic images, spectroscopic characterization is still lacking with regard to the interaction between the carbon nanotube and TiO₂. In this work, we show evidence of the attachment of nanostructured TiO₂ to multiwalled carbon nanotubes (MWNTs) by Raman spectroscopy. The nanostructured TiO₂ was characterized by both full‐width at half‐maximum (FWHM) and the Raman shift of the TiO₂ band at ca 144 cm⁻¹, whereas the average diameter of the crystallite was estimated as approximately 7 nm. Comparison of the Raman spectra of the MWNTs and MWNTs/TiO₂ shows a clear inversion of the relative intensities of the G and D bands, suggesting a substantial chemical modification of the outermost tubes due to the attachment of nanostructured TiO₂. To complement the nanocomposite characterization, scanning electronic microscopy and X‐ray diffraction were performed. Copyright © 2011 John Wiley & Sons, Ltd.     

New features in the anti‐Stokes and Stokes Raman spectra of single‐walled carbon nanotubes that are highly separated into their semiconducting and metallic nanotube components

Surface‐enhanced Raman scattering studies were performed using nonresonant (514.5 nm) and resonant (676.4 nm) optical excitations on single‐walled carbon nanotubes thoroughly separated into semiconducting (pure 99%) and metallic (pure 98%) components. Regardless of the support (Au or Ag), the metallic nanotubes do not present an anomalous anti‐Stokes Raman emission. Regardless of whether an on‐resonant or off‐resonant optical excitation is used, only the semiconducting nanotubes produce an abnormal anti‐Stokes Raman emission that grows when increasing the excitation light intensity or temperature. The Raman studies under light polarized relative to the main nanotube axis demonstrate that only semiconducting nanotubes are sensitive toward changes in the polarization of the excitation light. Copyright © 2014 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman scattering of pyridine‐functionalized multi‐walled carbon nanotubes

Carbon nanotubes (CNTs) have attracted great attention for their potential use in many applications because of their intrinsic properties. The importance other than the impact of the application of CNT‐embedded membranes in the area of water technology development is immense. In this context, the identification and quantification of CNTs in aqueous resources during relevant water purification processes can be proven of high significance. Surface‐enhanced Raman scattering (SERS) potentially has the sensitivity required for trace analysis and has been previously used for CNT identification on solid substrates. A thorough study for the identification and quantification of small concentrations of multi‐walled CNTs (MWCNTs) in water suspensions via SERS has been performed. The functionalization of MWCNTs with pyridine groups seems to favor the surface enhancement of relevant Raman signal. This study constitutes the first step of a work in progress for the characterization of CNTs at quite low concentration range by SERS in any water suspension. It is based on an ex ante functionalization of the CNTs by pyridine, demonstrating the potential of the method. Our long‐term aim is its general application built, however, in an ex post relevant functionalization of the CNTs in any aqueous solution. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of sulphuric–nitric acid mixture composition on surface chemistry and structural evolution of liquid‐phase oxidised carbon nanotubes

Liquid phase functionalisation of carbon nanotubes is carried out via a H₂SO₄ + HNO₃ mixture, and the effect of the sulphuric to nitric acid volume ratio (1:3–3:1) is systematically investigated by means of complementary techniques, observing the expected progressive downgrade of the crystalline quality, along with the increase of oxygenated functionality concentration. In addition, in contrast with common expectations, the results obtained demonstrate that the concentration of carboxylic groups (acids and anhydrides) never exceeds that of all other functionalities (lactones, phenols, quinones/carbonyls and sulphonic groups) introduced by chemical oxidation. Only by using equal volumes of sulphuric and nitric acids the concentrations of carboxylic and non‐carboxylic groups become comparable. Raman analysis reveals that a change in the sample homogeneity accompanies the variations of the relative proportions of the various oxygenated groups, by the typology of which the vibration modes of carbon pairs and carbon rings appear to be affected to different extents. Copyright © 2012 John Wiley & Sons, Ltd.     

Effects of purification on the diameter separation of metallic single‐walled carbon nanotubes by gel column chromatography

Metallic single‐walled carbon nanotubes (m‐SWCNTs) with excellent conductivity and transparency are considered to be eminent electrode materials. However, it still remains a challenge to separate m‐SWCNTs by their diameters. As reported in this Letter, by effective purification treatment of SWCNTs, we succeeded in achieving diameter separation of m‐SWCNTs using gel column chromatography. TEM and Raman characterizations revealed that metal catalysts and amorphous carbon on tube surfaces were largely reduced, which contributed to the diameter separation of m‐SWCNTs.

     

A DFT study of the mechanism and selectivities of the [3 + 2] cycloaddition reaction between 3‐(benzylideneamino)oxindole and trans‐β‐nitrostyrene

The mechanism and regioselectivities and stereoselectivities of the [3 + 2] cycloaddition (32CA) reaction of 3‐(benzylideneamino) oxindole (AY) and trans‐β‐nitrostyrene have been studied using both B3LYP and ωB97XD density functional theory methods together with the standard 6‐31G(d) basis set. Four reactive pathways associated with the ortho and meta regioselective channels and endo and exo stereoselective approaches modes have been explored and characterized. While the B3LYP functional fails to predict the experimental regioselectivity, the ωB97XD one succeeds to predict the experimentally observed meta regioselectivity favoring the formation of meta/endo cycloadduct as the major isomer. Inclusion of solvent effects increases the regioselectivity and decreases the experimentally observed stereoselectivity. Analysis of the density functional theory global reactivity indices and the Parr functions of the reagents in its ground state allows explaining the reactivity and the meta regioselectivity of this zwitterionic‐type 32CA reaction, which account for the high polar character of this reaction. Non‐covalent interaction analysis of the most favorable meta/endo transition state structure reveals that the formation of a hydrogen‐bond between 1 nitro oxygen and the AY N–H hydrogen is responsible for the selectivity experimentally found in this polar zwitterionic‐type 32CA reaction.     

An XANES study on the modification of single‐walled carbon nanotubes by nitric acid

X‐ray absorption near‐edge structure (XANES) spectroscopy has been applied to identify the modification process of single‐walled carbon nanotubes (SWCNTs) treated by nitric acid. The carboxyl groups created by the nitric acid treatment have been found to be formed on both the carbonaceous fragments and the side walls of SWCNTs. The carbonaceous fragments could be removed by a following washing treatment with sodium hydroxide. XANES spectra indicate that carbonaceous fragments are the result of the synthesis process and/or of the nitric acid treatment. Tube walls of SWCNTs are weakly oxidized by the nitric acid treatment although, after removing carbonaceous fragments, a direct oxidation process of SWCNTs is observed. Experimental data address the removal of carbonaceous fragments on SWCNTs as an efficient method for side‐wall modification of a SWCNT.     

Anti‐Stokes Raman spectroscopy as a method to identify the metallic and semiconducting configurations of double‐walled carbon nanotubes

Although Raman spectra reveal, as a signature of double‐walled carbon nanotubes (DWCNTs), two radial breathing mode (RBM) lines associated with the inner and outer tubes, the specification of their nature as metallic or semiconducting remains a topic for debate. Investigating the spectral range of the RBM lines, we present a new procedure of the indexing of the semiconducting or metallic nature of the inner and outer shell that forms the DWCNT. The procedure exploits the difference between the intensities of recorded anti‐Stokes Raman spectrum and the anti‐Stokes spectrum calculated by applying the Boltzmann formulae to the recorded Stokes spectrum. The results indicate that the two spectra do not coincide with what should happen in a normal Raman process, namely, that there are RBM lines of the same intensity in both spectra, as well as RBM lines of higher intensity that are observed in the calculated spectrum. This discrepancy results from the surface‐enhanced Raman scattering mechanism that operates differently on metallic or semiconducting nanotubes. In this context, the analysis of the RBM spectrum can reveal pairs of lines associated with the inner/outer shell structure of DWCNT, and when the intensities between the recorded and calculated spectra coincide, the nanotube is metallic; otherwise, the nanotube is semiconducting. Copyright © 2014 John Wiley & Sons, Ltd.     

Exploring the possible interlinked structures in single‐wall carbon nanotubes under pressure by Raman spectroscopy

High‐pressure Raman measurements on single‐wall carbon nanotubes (SWNTs) have been carried out in a diamond anvil cell by using two wavelength lasers: 830 and 514.5 nm. Irrespective of using a pressure transmitting medium (PTM) or not, we found that nanotubes undergo similar transformations under pressure. The pressure‐induced changes in Raman signals at around 2 and 5 GPa are attributed to the nanotube cross‐section transitions from circle to ellipse and then to a flattened shape, respectively. Especially with pressure increasing up to 15–17 GPa, we observed that the third transition takes place in both the Raman wavenumber and the linewidth of G‐band. We propose explanations that the interlinked configuration with sp³ bonds forms in the bundles of SWNTs under pressure, which was the cause for the occurrence of those Raman anomalies, similar to the structural‐phase transition of graphite above 14 GPa. Our TEM observations and Raman measurements on the decompressed samples support this transition picture. Copyright © 2012 John Wiley & Sons, Ltd.     

Theoretical analysis of planar and non‐planar electron ‐ acoustic shock waves in electron‐positron‐ion plasma

The propagation properties of planar and non‐planar electron acoustic shock waves composed of stationary ions, cold electrons, and q‐non‐extensive hot electrons and positrons are studied in unmagnetized electron‐positron‐ion plasma. In this model, the Korteweg‐de Vries Burgers equation is obtained in the planar and non‐planar coordinates. We have investigated the combined action of the dissipation, non‐extensivity, density ratio of hot to cold electrons, concentration of positrons, and temperature difference of cold electrons, hot electrons, and positrons. It was found that the amplitude of shock wave in e‐p‐i plasma increases when the positron concentration and temperature increase. The same effect is observed in the case of kinematic viscosity η. Furthermore, it is noticed that spherical wave moves faster in comparison to the shock waves in cylindrical geometry. This difference arises due to the presence of the geometry term m/2τ. It should be noted that the contribution of the geometry factor comes through the continuity equation. Results of our work may be helpful to illustrate the different properties of shock wave features in different astrophysical and space environments like supernova, polar regions, and in the vicinity of black holes.     

氮掺杂手性碳纳米管的电子结构和输运特性的理论研究

运用第一性原理的密度泛函理论,结合非平衡格林函数,研究了氮原子取代掺杂手性单壁(6,3)碳纳米管的电子结构和输运特性.计算结果表明:不同构形和不同数目的氮原子取代掺杂对手性碳管的输运性质有很复杂的影响.研究发现,氮原子掺杂明显改变了碳管的电子结构,使金属型手性碳管的输运性能降低,电流-电压曲线呈非线性变化,而且输运性能随着杂质原子间间距的变化而发生显著改变.在一定条件下,金属型碳管向半导体型转变. 关键词： 手性单壁碳纳米管 氮掺杂 电子结构 输运性能