Photochemical isomerization of norbornadiene‐containing polytriazoles obtained by click chemistry polyaddition

Polyesters and polyethers containing norbornadiene (NBD) and 1,2,3‐triazole units in the main chain are prepared by step growth polymerization of diester or diether NBD‐based dialkynes with different aromatic diazides using copper‐catalyzed azide–alkyne cycloaddition. The solubility and the physical properties of the resulting polytriazoles are investigated by differential scanning calorimetry, thermogravimetric analysis, size exclusion chromatography, and ¹H NMR spectroscopy, and are discussed taking into account of the chemical structures of the monomers. All of them are amorphous with glass transition temperatures ranging from 51 to 117 °C, number average molecular weight (M_n) values from 16 to 43 kDa and thermal degradation (T_d10) values from 175 to 292 °C. The photochemical valence isomerization (PVI) of the NBD units into quadricyclanes (QC) is investigated using UV–vis spectroscopy of polymer films spin‐coated onto quartz substrates. For the first time the PVI of NBD into QC is demonstrated by ¹H NMR spectroscopy. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 223–231     

Thiol–norbornene materials: Approaches to develop high Tg thiol–ene polymers

The ability to prepare high T_g low shrinkage thiol–ene materials is attractive for applications such as coatings and dental restoratives. However, thiol and nonacrylated vinyl materials typically consist of a flexible backbone, limiting the utility of these polymers. Hence, it is of importance to synthesize and investigate thiol and vinyl materials of varying backbone chemistry and stiffness. Here, we investigate the effect of backbone chemistry and functionality of norbornene resins on polymerization kinetics and glass transition temperature (T_g) for several thiol–norbornene materials. Results indicate that T_gs as high as 94 °C are achievable in thiol–norbornene resins of appropriately controlled chemistry. Furthermore, both the backbone chemistry and the norbornene moiety are important factors in the development of high T_g materials. In particular, as much as a 70 °C increase in T_g was observed in a norbornene–thiol specimen when compared with a sample prepared using allyl ether monomer of analogous backbone chemistry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5686–5696, 2007     

Synthesis and thermoresponsive properties of OEGylated polypeptide with a LCST at body temperature in water and with a UCST in alcohol or ethanol/water solvent mixture

Thermoresponsive polypeptides bearing oligo(ethylene glycol) (OEG) pendants (i.e., P1‐OEG_x and P2‐OEG_x, x = 3, 7) were synthesized by copper‐mediated 1,3‐dipolar cycloaddition with high grafting efficiency (≥97%) between side‐chain “clickable” polypeptides, namely poly(γ‐4‐(propargoxycarbonyl)benzyl‐l ‐glutamate) (P1) or poly(γ‐4‐(4‐propargoxyphenoxycarbonyl)benzyl‐l ‐glutamate) (P2) and azido functionalized OEG (N₃‐OEG_x). P1 and P2 with similar degree of polymerization (DP = 35 or 37) were prepared from triethylamine initiated ring‐opening polymerization of respective N‐carboxyanhydrides. P1‐OEG_x (x = 3, 7) and P2‐OEG₇ showed reversible UCST‐type phase transitions in various alcoholic solvents (e.g., ethanol, propanol, n‐butanol, and n‐pentanol). P2‐OEG₃ also showed reversible UCST‐type phase transitions in ethanol/water solvent mixtures at the weight percentage of ethanol no less than 50 wt %. P1‐OEG₇ and P2‐OEG₇ showed reversible LCST‐type phase transitions in aqueous solutions. Variable‐temperature UV–vis spectroscopy revealed that the LCST‐type phase transition temperature (T_pt) of P2‐OEG₇ with benzoic acid phenyl ester linkages was at around body temperature and it was barely changed with the variation of polymer concentration, yet it showed noticeable dependence on the nature of salt (i.e., NaCl, NaBr, NaI, or KCl) and salt concentration in the range of 0–300 mM. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 163–173     

Arborescent polymers and other dendrigraft polymers: A journey into structural diversity

Arborescent polymers are characterized by a dendritic, multilevel branched architecture derived from successive grafting reactions. In spite of their much larger size, these materials display properties analogous to dendrimers and hyperbranched polymers, the two other dendritic polymer families. The distinguishing features of arborescent polymers are their assembly from polymeric building blocks of uniform size and their very high molecular weights attained in few synthetic steps. This article offers an overview of the historical aspects of the development of dendrigraft polymers, starting from our initial efforts on the synthesis of arborescent polystyrenes. Major subsequent developments in the synthetic techniques from our and other research groups allowing the synthesis of dendrigraft copolymers, tailoring of the structural characteristics of the molecules, and further simplifications to their synthesis are also reviewed, with emphasis over the broad range of architectures attainable in these systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3803–3810, 2007     

Small band gap conjugated polymers based on thiophene–thienopyrazine copolymers

In this study, five small band gap thiophene ( TH )–thienopyrazine ( TP ) conjugated copolymers were synthesized by Stille‐coupling reaction. The polymer structures consisted of one to four thiophene rings with the TP of different side groups provided a systematical investigation on the structure–electronic property relationship. The absorption maxima of the polymer films decreased from 850 to 590 nm as the thiophene moieties increased from thiophene to quaterthiophene. The optical and electrochemical band gaps of the studied poly[2,3‐didodecyl‐5‐(thiophen‐2‐yl)thieno[3,4‐b]pyrazine] ( PTHTP‐C12 ) were 0.97 and 0.78 eV, respectively, indicating a significant intramolecular charge transfer. The theoretical geometry and electronic properties of the TH ‐ TP copolymers by the density functional theory at the B3LYP level and 6‐31G(d) basis set suggested that the bond length alternation enlarged with enhancing the thiophene content and resulted in the variation on the polymer band gap. The relatively small theoretical effective mass of poly( TH ‐alt‐ TP ) also indicated its potential applications for field transistor applications. Our study demonstrates the tunable electronic properties of small band gap copolymers by the thiophene content and the resulted geometry variation. Such polymers could be potentially used for near‐infrared electronic and optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5872–5883, 2007     

Synthesis and UCST‐type phase behaviors of OEGylated random copolypeptides in alcoholic solvents

A series of OEGylated random copolypeptides with similar main‐chain lengths and different oligo(ethylene glycol) (OEG) molar content and chain lengths were prepared from triethylamine initiated ring‐opening polymerization (ROP) of OEGylated γ‐benzyl‐_L‐glutamic acid based N‐carboxyanhydride (OEG_mBLG–NCA, m = 2, 3) and γ‐benzyl‐_L‐glutamic acid based N‐carboxyanhydride (BLG–NCA). ¹H NMR analysis verified copolypeptides structures and determined the OEG molar content (x). FTIR analysis further confirmed the molecular structures, indicated α‐helical conformations of copolypeptides in the solid‐state, and revealed H‐bonding interactions between OEG pendants and alcoholic solvents. The copolypeptides exhibited a reversible upper critical solution temperature (UCST)‐type phase behavior in various alcoholic solvents (i.e., methanol, ethanol, 1‐propanol, 1‐butanol, and 1‐pentanol) depending on the x values and OEG side‐chain lengths (m). Variable‐temperature UV–vis analysis revealed that the UCST‐type transition temperatures (T_pts) of the copolypeptides in alcohols decreased as x or m value increased or as polymer concentration decreased. T_pts of copolypeptides with high x values (x ≥ 0.50) increased as the number of methylene of the alcoholic solvent increased from 3 (i.e., 1‐propanol) to 5 (i.e., 1‐pentanol). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3444–3453     

Synthesis and UCST‐type phase behavior of OEGylated poly(γ‐benzyl‐l‐glutamate) in organic media

A series of OEGylated poly(γ‐benzyl‐l ‐glutamate) with different oligo‐ethylene‐glycol side‐chain length, molecular weight (MW = 8.4 × 10³ to 13.5 × 10⁴) and narrow molecular weight distribution (PDI = 1.12–1.19) can be readily prepared from triethylamine initiated ring‐opening polymerization of OEGylated γ‐benzyl‐l ‐glutamic acid based N‐carboxyanhydride. FTIR analysis revealed that the polymers adopted α‐helical conformation in the solid‐state. While they showed poor solubility in water, they exhibited a reversible upper critical solution temperature (UCST)‐type phase behavior in various alcoholic organic solvents (i.e., methanol, ethanol, 1‐propanol, 1‐butanol, 1‐pentanol, and isopropanol). Variable‐temperature UV–vis analysis revealed that the UCST‐type transition temperatures (T_pts) of the resulting polymers were highly dependent on the type of solvent, polymer concentration, side‐ and main‐chain length. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1348‐1356     

Mechanical property tuning of semicrystalline network polymers by controlling rates of crystallization and crosslinking

Semicrystalline network polymers were obtained by the Diels–Alder (DA) reaction of furyl‐telechelic poly(ε‐caprolactone) and tris(2‐maleimide ethyl)amine. Controlling the rates of crystallization and crosslinking reaction gave materials with various properties. Curing at a temperature much below T_m of poly(ε‐caprolactone), at which crystallization proceeded first followed by DA reaction, gave a hard and stiff material, whereas curing above T_m gave a soft and stretchable one. When crystallization and crosslinking were promoted simultaneously, tough and ductile materials were obtained. Structural analysis of the network polymers showed that the variation in the properties was derived from the difference in the crystallinity, crystallite size, and network structure. Therefore, materials with various mechanical properties, from soft to hard, could be obtained by simple thermal treatment. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Anionic Synthesis and Rheological Characterization of Poly(p‐methylstyrene) Model Comb Architectures with a Defined and Very Low Degree of Long Chain Branching

A method is presented for the synthesis of defined sparsely branched polystyrene‐based homopolymer model combs. By the use of poly(p‐methylstyrene) (PpMS) as backbone and side chains, a low, but well controlled amount of branching of typically less than 1 mol‐% (e.g., 1 branch per approx. 200 backbone C‐atoms) can be achieved. The used anionic synthesis offers full control of the molecular weight in combination with low polydispersity. Molecular weight and polydispersity were determined by SEC‐MALLS, confirming the well defined synthesis with low polydispersity ( < 1.07). The melt rheological properties of the synthesized linear and comb polymers were obtained in both oscillatory shear and uniaxial extensional flow. Using the so‐called van Gurp–Palmen plot, clear differences between both synthesized topologies are clearly seen. The appearance of a second minimum for lower values of the complex modulus in shear is a clear indication of a second relaxation process attributable to the entangled side chains. The presence of the entangled side chains is responsible for the observed strain hardening obtained in extensional viscosity experiments, as compared to the linear polymers. These model samples open up the possibility to compare different advanced rheological methods, e.g., FT‐rheology or extensional rheology, towards limiting sensitivity.

     

Synthesis of chalcone‐based fluorescent polymers: Diels‐Alder reaction of chalcones and their polymerization through ROMP

Ring opening metathesis polymerization (ROMP) was carried out on Diels‐Alder adducts formed from reactions between chalcones and cyclopentadiene. Most of the chalcones gave predominantly endo‐adducts and the exo‐adducts were obtained in good yields from reacting cyclopentadiene with furfurylidine acetone and N,N,diethylaminobenzylidine‐(4‐hydroxy)acetophenone. These exo‐adducts were subjected to ROMP using Grubbs catalyst, bis(tricyclohexylphosphine)benzylidinedichloride. The monomers and polymers were characterized using spectroscopic techniques like FT‐IR, ¹HNMR. The polymers were characterized using TGA, DSC, and GPC. The polymers were found to possess fluorescent properties and poly[2‐(4‐diethylamino)phenyl‐3,5‐divinylcyclopentyl](4‐hydroxyphenyl) methanone was found to have good emissive property at two wavelengths. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1521–1531, 2008     

Dehydrocoupling and Diels–Alder reactions on siloxane polymers

Dehydrocoupling reactions between linear poly(methylhydrosiloxane) {Me₃SiO–[MeSi(H)O]_n–SiMe₃} and alcohols such as cholesterol, anthracene‐9‐carbinol, (12‐crown‐4)‐2‐carbinol, pyrene‐1‐carbinol, 4‐methyl‐5‐thiazoleethanol, and 4‐pyridilpropanol were introduced under catalytically mild conditions. The degrees of conversion of Si? H bonds in polysiloxane were monitored with ¹H NMR spectra. The reaction of the 9‐methoxyanthracene adduct on siloxane polymers and maleimide derivatives (maleimide, N‐ethylmaleimide, and maleic acid anhydride) produced [2+4]‐cycloadducts in very high yields. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4013–4019, 2002     

Thieno[3,2‐b]thiophene‐substituted benzodithiophene in donor–acceptor type semiconducting copolymers: A feasible approach to improve performances of organic photovoltaic cells

Thieno[3,2‐b]thiophene‐substituted benzo[1,2‐b:4,5‐b′]dithiophene donor units (TTBDT) serve as novel promising building blocks for donor–acceptor (D‐A) copolymers in organic photovoltaic cells. In this study, a new D‐A type copolymer (PTTBDT‐TPD) consisting of TTBDT and thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) is synthesized by Stille coupling polymerization. A PTTBDT‐TPD analog consisting of TTBDT and alkylthienyl‐substituted BDT (PTBDT‐TPD) is also synthesized to compare the optical, electrochemical, morphological, and photovoltaic properties of the polymers. Bulk heterojunction photovoltaic devices are fabricated using the polymers as p‐type donors and [6,6]‐phenyl C₇₁‐butyric acid methyl ester (PC₇₁BM) as the n‐type acceptor. The power conversion efficiencies of the devices fabricated using PTTBDT‐TPD and PTBDT‐TPD are 6.03 and 5.44%, respectively. The difference in efficiency is attributed to the broad UV–visible absorption and high crystallinity of PTTBDT‐TPD. The replacement of the alkylthienyl moiety with thieno[3,2‐b]thiophene on BDT can yield broad UV–visible absorption due to extended π‐conjugation, and enhanced molecular ordering and orientation for organic photovoltaic cells. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3608–3616     

Poly(butylene terephthalate‐co‐5‐tert‐butyl isophthalate) copolyesters: Synthesis,characterization, and properties

A series of poly(butylene terephthalate) copolyesters containing 5‐tert‐butyl isophthalate units up to 50 mol %, as well as the homopolyester entirely made of these units, were prepared by polycondensation from a melt. The microstructure of the copolymers was determined by NMR to be random for the whole range of compositions. The effect exerted by the 5‐tert‐butyl isophthalate units on thermal, tensile, and gas transport properties was evaluated. Both the melting temperature (T_m) and crystallinity were found to decrease steadily with copolymerization, whereas the glass‐transition temperature (T_g) increased and the polyesters became more brittle. Permeability and solubility slightly increased with the content in substituted isophthalic units, whereas the diffusion coefficient remained practically constant. For the homopolyester poly(5‐tert‐butyl isophthalate), all these properties were found to deviate significantly from the general trend displayed by copolyesters, suggesting that a different structure in the solid state is likely adopted in this case. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 92–100, 2005     

Long‐chain‐branched polyethene by the copolymerization of ethene and nonconjugated α,ω‐dienes

Ethene was copolymerized (1) with 1,5‐hexadiene with rac‐ethylenebis(indenyl)zirconium dichloride/methylaluminoxane (MAO) used as a catalyst and (2) with 1,7‐octadiene with bis(n‐butylcyclopentadienyl)zirconium dichloride/MAO and rac‐ethylenebis(indenyl)hafnium dichloride (Et[Ind]₂HfCl₂)/MAO used as catalysts at 80 °C in toluene. The copolymer microstructure and the influence of diene incorporation on the rheological properties were examined. Ethene and 1,5‐hexadiene formed a copolymer in which a major fraction of the 1,5‐hexadiene was incorporated into rings and a small fraction formed 1‐butenyl branches. The copolymerization of ethene with 1,7‐octadiene resulted in a higher selectivity toward branch formation. Some of the branches formed long‐chain‐branching (LCB) structures. The ring formation selectivity increased with decreasing ethene concentration in the polymerization reactor. Melt rheological properties of the diene copolymers resembled those of metallocene‐catalyzed LCB homopolyethenes and depended on the vinyl content, the catalyst, and the polymerization conditions. At high diene contents, all three catalysts produced crosslinked polyethene. This was especially pronounced with Et[Ind]₂HfCl₂, where only 0.2 mol % 1,7‐octadiene in the copolymer was required to achieve significantly modified rheological properties. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3805–3817, 2001     

Jacket‐like structure of donor–acceptor chromophores‐based conducting polymers for photovoltaic cell applications

Through the Stille coupling polymerization, a series of soluble acceptor/donor quinoxaline/thiophene alternating conducting polymers with a hole‐transporting moiety of carbazole as a side chain ( PCPQT ) has been designed, synthesized, and investigated. The UV–vis measurement of the charge‐transferred type PCPQT s of different molecular weights with low polydispersity exhibits a red shifting of their absorption maximum from 530 to 630 nm with increasing chain length (M_n: from 1100 to 19,200). The HOMO and LUMO energy levels of PCPQT can be determined from the cyclic voltammetry measurement to be ?5.36 and ?3.59 eV, respectively. Solar cells made from PCPQT/PCBM bulk heterojunction show a high open‐circuit voltage, V_oc of ～0.75 V, which is significantly higher than that of a solar cell made from conventional poly(3‐hexyl thiophene)/ PCBM as the active polymer PCPQT has lower HOMO level. Further improvements are anticipated through a rational design of the new low band‐gap and the structurally two‐dimensional donor–acceptor conducting polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1607–1616, 2010     

Synthesis,characterization, and ion‐complexing properties of polymers displaying densely packed arrays of crown‐ethers as lateral substituents

We report the synthesis and ion‐binding properties of four poly(crown‐ethers) displaying either one or two crown‐ethers (15‐crown‐5 or 18‐crown‐6) on every third carbon alongside the backbone. The polymers were synthesized by living anionic ring‐opening polymerization of disubstituted cyclopropane‐1,1‐dicarboxylates monomers. Cation binding of the polychelating polymers and corresponding monomers to Na⁺ and K⁺ was evaluated by picrate extraction and isothermal calorimetry titration. This novel family of poly(crown‐ethers) demonstrated excellent initial binding of the alkali ions to the polymers, with a higher selectivity for potassium. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2337–2345     

Benzo[2,1‐b;3,4‐b′]dithiophene‐based low‐bandgap polymers for photovoltaic applications

The synthesis of four alternating copolymers using benzo[2,1‐b;3,4‐b′]dithiophene (BDP) as the common donor unit is presented. Before the synthesis, theoretical calculations that we performed predicted that the incorporation of BDP, which consists of fused dithiophene units with a benzene ring, into these polymers would produce a low‐lying highest occupied molecular orbital (HOMO) energy level. Low‐lying HOMO levels are desirable to produce high open circuit voltages (V_OC) in organic bulk heterojunction (BHJ) photovoltaic devices. The polymers' structural characterization, as well as the preliminary results of their performance in BHJ devices, using (6,6)‐phenyl C₆₁‐butyric acid methyl ester as the electron acceptor, is presented. The V_OC values follow the expected trend: increasing with decreasing HOMO level of the polymer. High V_OC values of 0.81 and 0.82 V have been obtained from two polymers: PBDPBT and PBDPDPP. The initial power conversion efficiency achieved in these unoptimized devices was 1.11% because of relatively low J_SC values. The variation observed in the J_SC values between the four polymers is discussed. Device performance is expected to increase with optimization of processing conditions for the devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of Guanidinylation on the Properties of Poly(2‐aminoethylmethacrylate)‐Based Antibacterial Materials

The effect of converting ammonium into guanidine moieties, compared to other factors such as molecular weight or hydrophobicity, on the antibacterial activity is investigated for homo‐ and copolymers of 2‐aminoethylmethacrylate in solution or coatings. Polymers are obtained by free radical polymerization, polymer‐analogous guanidinylation is conducted with cyanamide; non‐leaching immobilization is achieved by LBL assembly of homopolymers or crosslinking of functional sidegroups in copolymers. Antibacterial activity to Escherichia coli or Bacillus subtilis is determined by different standard methods. Guanidinylation improves antibacterial activity and speed as well as cytotoxicity of hydrophilic homo‐ and copolymers in solution or coatings.

     

Synthesis of ω‐anthracenyl‐functionalized soluble polyphenylene: effect of the end‐group on optical and electrical properties

ω‐Anthracenyl‐functionalized soluble polyphenylene (AN‐SPP) with a well‐controlled polymer chain was synthesized. The optical and electrical properties were strongly affected by the anthracenyl end‐group. The UV absorption and photoluminescence emission were enhanced and shifted toward the longer wavelength region in comparison to that of soluble polyphenylene. The optical band gap energies of the main chain and the anthracenyl end‐group were 3.15 and 3.89 eV, respectively. The highest occupied molecular orbital/lowest unoccupied molecular orbital energy levels of the main chain and the anthracenyl end‐group of AN‐SPP were ?4.98/?1.81 eV and ?7.25/?3.36 eV, respectively. The current–voltage characteristics of AN‐SPP were controllable by the presence of the anthracenyl end‐group. Copyright © 2008 John Wiley & Sons, Ltd.     

Soluble dithienothiophene polymers: Effect of link pattern

Soluble conjugated polymers based on 3,5‐didecanyldithieno[3,2‐b:2′,3′‐d]thiophene—single‐bond ( 1 ), double‐bond ( 2 ), and triple‐bond linked ( 3 )—were synthesized by palladium(0)‐catalyzed Stille coupling reaction and oxidation polymerization. The thermal, absorption, emission, and electrochemical properties of these polymers were examined; the effect of the link pattern was studied. All polymers exhibit decomposition temperatures over 295 °C and glass‐transition temperatures in the range of 137–202 °C. The absorption spectra of 1 , 2 , and 3 in thin films exhibit absorption maxima at 381, 584, and 444 nm, respectively. Polymer 1 exhibits intense green emission located at 510 nm in film, whereas polymers 2 and 3 are nonemissive both in solution and in film due to H‐aggregate. Cyclic voltammograms of polymers 1 , 2 , and 3 display irreversible oxidation waves with onset oxidation potentials at 1.73, 0.78, and 1.03 V versus Ag⁺/Ag, respectively. Theory calculation on model compounds suggests that the dihedral angle decreases in the order of 1 > 3 > 2 . On reducing the dihedral angle, the polymer exhibits a longer absorption maximum, a smaller bandgap, a less oxidizing potential and fluorescence quench, due to more coplanar and more π‐electron delocalized backbone structure. Polymer solar cells were fabricated based on the blend of polymer 2 and methanofullerene [6,6]‐phenyl C61‐butyric acid methyl ester (PCBM). The power conversion efficiency of 0.45% was achieved under AM 1.5, 100 mW cm^?2 using polymer 2 :PCBM (1:2, w/w) as active layer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2843–2852, 2009