The thermochemistry of solvation of imidazolium-based ionic liquids in benzene

ABSTRACT

The present work is devoted to the thermochemical study of solvation of ionic liquids (IL) in benzene. The solution enthalpies of 1-ethyl-3-methylimidazolium tricyanomethanide [EMIM][C(CN)₃], 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF₆], 1-octyl-3-methylimidazolium tetrafluoroborate [OMIM][BF₄], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][TfO] in benzene were measured. The solvation enthalpies of imidazolium-based IL were calculated. Molar refractions of imidazolium-based IL form literature data on density and refractive indexes of IL were also calculated. The linear correlation between solvation enthalpy and molar refraction of IL was observed. This correlation can be used to calculate the vaporization enthalpy of imidazolium-based IL from solution calorimetry data.     

Extraction of Metal Ions from Aqueous Solutions Using Imidazolium Based Ionic Liquids

This article represents a step towards how to choose an ionic liquid as the solvent to improve metal ion (Ag⁺ and Pb²⁺) extraction. The liquid-liquid solvent extraction is proposed with the following imidazolium ionic liquids (ILs): 1-ethyl-3-ethylimidazolium, or 1-butyl-3-ethylimidazolium, or 1-hexyl-3-ethylimidazolium bis{(trifluoromethyl)sylfonyl}imide [EEIM][NTf₂], or [BEIM][NTf₂], or [HEIM][NTf₂], or 1-butyl-3-ethylimidazolium hexafluorophosphate [BEIM][PF₆], or 1-hexyl-3-ethylimidazolium hexafluorophosphate [HEIM][PF₆] and the popular 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF₆] for comparison. The effect of anion type (NTf₂⁻ versus PF₆⁻) and the effect of structural components of an ionic liquid including alkyl chain length at the cation and the ethyl substituent instead methyl at the cation, on the extraction and re-extraction processes by using dithizone as a metal chelator, were studied at 296 K. Dithizone was employed to form neutral metal-dithizone complexes with heavy metal ions to extract them from aqueous solution into the ILs. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users. Presented at the 236th ACS National Meeting, August 17–21, Philadelphia, USA.     

Thermodynamics of cesium complexes formation with 18-crown-6 in ionic liquids

Thermodynamic data for cesium complexes formation with 18-crown-6 (18C6, L) [Cs(18C6)]⁺ in N-butyl-4-methyl-pyridinium tetrafluoroborate ([BMPy][BF₄], I), in 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄], II) and in 1-butyl-3-methylimidazolium dicyanamide ([BMIM][N(CN)₂], III) were measured with NMR ¹³³Cs technique at 23–50 °C. The stability of cesium complex in RTILs is estimated to be in the range between water and DMFA. Stability constants for [Cs(18C6)]⁺ are found to decrease as temperature is increasing. The following values for lgK(Cs+L) and ΔH(Cs+L) at 23 °C are determined: 2.6 (0.3), ?47(1) kJ/mol (RTIL I); 2.8(0.3), ?80(3) kJ/mol (RTIL II) and 3.03 (0.08), ?47(2) kJ/mol (RTIL III). It is demonstrated that enthalpy change promotes complex formation while the corresponding change of entropy is negative and provides decomposition of [Cs(18C6)]⁺.     

Estimates of Internal Pressure and Molar Refraction of Imidazolium Based Ionic Liquids as a Function of Temperature

Estimates of the internal pressure (∂ U/∂ V) _T of the ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF₆], and 1-methyl-3-octylimidazolium tetrafluoroborate [OMIM][BF₄] were made from experimentally determined densities and speeds of sound in the temperature range 283.15 to 343.15 K. Values (∂ U/∂ V) _T for all the ILs studied are higher than those of water and molecular organic liquids. We also measured the refractive indices n _D in the temperature range 288.15 to 343.15 K and estimated the molar refraction R _M. Refractive indices of ILs were also higher than those of normal organic liquids but were comparable to those of long hydrocarbon chain organic solvents.     

The physicochemical properties of some imidazolium-based ionic liquids and their binary mixtures

The density, viscosity and conductivity of ionic liquids (ILs), 1-octyl-3-methylimidazolium tetrafluoroborate ([omim][BF4]), 1-octyl-3-methylimidazolium chloride ([omim][Cl]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim] BF4]), 1-hexyl- 3-methylimidazolium chloride ([hmim][Cl]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF6]), and the [omim][BF4] + [omim][Cl], [hmim][BF4] + [hmim][Cl], and [hmim][PF6] + [hmim][Cl] binary mixtures were studied at dif- ferent temperatures. It was demonstrated that the densities of both the neat ILs and their mixtures varied linearly with temper- ature. The density sensitivity of a binary mixture is between those of the two components. The excess molar volumes (VE) of [hmim][BF4] + [hmim][Cl] and [hmim][PF6] + [hmim][Cl] mixtures are positive in the whole composition range. For [omim][BF4] + [omim][Cl], the VE is also positive in the [omim][Cl]-rich region, but is negative in the [omim][BF4]-rich re- gion. The viscosity or conductivity of a mixture is in the intermediate of those of the two neat ILs. For all the neat ILs and the binary mixtures studied, the order of conductivity is opposite to that of the viscosity. The Vogel-Tammann-Fulcher (VTF) equations can be used to fit the viscosity and conductivity of all the neat ILs and the binary mixtures. The neat ILs and their mixtures obey the Fractional Walden Rule very well, and the values of the Walden slopes are all smaller than unit, indicating obvious ion associations in the neat ILs and the binary mixtures.     

离子液体[BMIM]Br与[BMIM][BF4]配比浓度对Br-离子电荷转移的调节

利用X射线吸收精细结构光谱(XAFS)及紫外吸收光谱两种方法, 分析了离子液体1-丁基-3-甲基咪唑溴盐([BMIM]Br)中逐渐掺入1-丁基-3-甲基咪唑四氟硼酸盐([BMIM][BF₄])时, Br^-阴离子与咪唑阳离子之间氢键作用及电荷偏移量的改变. 随着[BMIM][BF₄]加入量增多, Br 元素XAFS近边(XANES)显示吸收峰降低, 吸收边位置向低能端位移0.9 eV; 扩展边(EXAFS)算出径向结构显示Br 与近邻原子间平均配位数降低、平均键长增长; 紫外光谱也有明显蓝移减色效应. 这些结果都表明Br₄^-的掺入改变了Br^-与阳离子间的电荷偏移量, 负电荷更多地转移到Br^-上, 量化计算的数据同样支持该结论.     

离子液体型表面活性剂研究

以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF₄]及[bmim][PF₆])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF₄]及[hmim][PF₆])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C₁₆mim][BF₄]及[C₁₆mim][PF₆])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF₄]及[2-hemim][PF₆])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF₄]及[eocmmim][PF₆]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C₁₆mim][BF₄]和[C₁₆mim][PF₆]具有发泡性能, 发泡力分别为68和120 mm.     

Experimental methodology for precise determination of density of RTILs as a function of temperature and pressure using vibrating tube densimeters

A specific calibration procedure that allows the accurate determination of densities of room temperature ionic liquids, RTILs, as a function of temperature and pressure using vibrating tube densimeters is presented. This methodology overcomes the problems of common calibration methods when they are used to determine the densities of high density and high viscosity fluids such as RTILs. The methodology is applied for the precise density determination of RTILs 1-ethyl-3-methylimidazolium tetrafluoroborate [Emim][BF₄], 1-butyl-3-methylimidazolium tetrafluoroborate [Bmim][BF₄], 1-hexyl-3-methylimidazolium tetrafluoroborate [Hmim][BF₄], and 1-octyl-3-methylimidazolium tetrafluoroborate [Omim][BF₄] in the temperature and pressure intervals (283.15 to 323.15) K and (0.1 to 60) MPa, respectively. The viscosities of these substances, needed for the estimation of the viscosity-induced errors, were estimated at the same conditions from the experimental measurements in the intervals (283.15 to 323.15) K and (0.1 to 14) MPa and from a specific extrapolation procedure. The uncertainty in the density measurements was estimated in ±0.30 kg · m^?3 which is an excellent value in the working intervals. The results of these RTILs have demonstrated that viscosity-induced errors are relevant and they must be taken into account for a precise density determination. Finally, an alternative tool for a simpler application of this procedure is presented.     

Ionic liquids as porogens in the microwave-assisted synthesis of methacrylate monoliths for chromatographic application

Several imidazolium-based ionic liquids (ILs) with varying cation alkyl chain length (C₄–C₁₀) and anion type (tetrafluoroborate ([BF₄]⁻), hexafluorophosphate ([PF₆]⁻) and bis(trifluoromethylsulfonyl)imide ([Tf₂N]⁻)) were used as reaction media in the microwave polymerization of methacrylate-based stationary phases. Scanning electron micrographs and backpressures of poly(butyl methacrylate-ethylene dimethacrylate) (poly(BMA-EDMA)) monoliths synthesized in the presence of these ionic liquids demonstrated that porosity and permeability decreased when cation alkyl chain length and anion hydrophobicity were increased. Performance of these monoliths was assessed for their ability to separate parabens by capillary electrochromatography (CEC). Intra-batch precision (n = 3 columns) for retention time and peak area ranged was 0.80–1.13% and 3.71–4.58%, respectively. In addition, a good repeatability of RSD_{Retention time} = <0.30% and ∼1.0%, RSD_{Peak area} = <1.30% and <4.3%, and RSD_Efficiency = <0.6% and <11.5% for intra-day and inter-day, respectively exemplify monolith performance reliability for poly(BMA-EDMA) fabricated using 1-hexyl-3-methylimidazolium tetrafluoroborate ([C₆mim][BF₄]) porogen. This monolith was also tested for its potential in nanoLC to separate protein digests in gradient mode. ILs as porogens also fabricated different alkyl methacrylate (AMA) (C4–C18) monoliths. Furthermore, employing binary IL porogen mixture such as 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim][BF₄]) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim][Tf₂N]) successfully decreased the denseness of the monolith, than when using [C₄mim][Tf₂N] IL alone, enabling a chromatographic run to be performed with 1:1 ratio produced baseline separation for the analytes. The combination of ILs and microwave irradiation made polymer synthesis very fast (∼10 min), entirely green (organic solvent-free) and energy saving process.     

Synthesis and characterization of hybrid materials based on 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid and Dawson-type tungstophosphate K7[H4PW18O62]·18H2O and K6[P2W18O62]·13H2O

In this study, we synthesized hybrid materials using well-Dawson polyoxometalates (POMs), K₇[H₄PW₁₈O₆₂]·18H₂O or K₆[P₂W₁₈O₆₂]·13H₂O and a room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]). K, W, P and CHN elemental analysis showed that one mole of [H₄PW₁₈O₆₂]⁷⁻ reacts with 6 moles of BMIM⁺ and one mole of [P₂W₁₈O₆₂]⁶⁻ reacts with 4 moles of BMIM⁺ to form, respectively, K[BMIM]₆H₄PW₁₈O₆₂ and K₂[BMIM]₄P₂W₁₈O₆₂. X-ray diffraction illustrated amorphous structure of the hybrid materials. FT-IR spectra showed the presence of both 1-butyl-3-methylimidazolium cation and the Dawson anion. TG analysis displayed a relative thermal stability of the hybrid materials compared to the parents Dawson POMs. Cyclic voltammetry showed that the reduction peak potentials of the Dawson anion in the hybrid materials shift towards negative values and the shift is more pronounced for K[BMIM]₆H₄PW₁₈O₆₂ compared to K₂[BMIM]₄P₂W₁₈O₆₂. This was attributed to a decrease in the acidity of the Dawson POM anion in the hybrid material.     

Thermodynamics of complexation of cesium ions with dibenzo-18-crown-6 in hydrophobic ionic liquids

The stability constants of the [Cs(DB18C6)]⁺ complex (DB18C6 is dibenzo-18-crown-6, L) in hydrophobic ionic liquids (room-temperature ionic liquids, RTIL) trioctylmethylammonium salicylate ([TOMA][Sal]), tetrahexylammnoium dihexylsulfosuccinate ([THA][DHSS]), and 1-butyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([BMIM][N(Tf)₂], as well as of the [Cs(18C6)₂]⁺ complex in [BMIM][N(Tf)₂], were measured by 133Cs NMR in the temperature range 27–57°C. The changes in the enthalpy and entropy of complex formation were determined. A linear correlation was revealed between logK ₁ and the extraction factor logD _Cs^DB18C6 for the cesium extraction from an aqueous solution into the RTIL.     

Effects of temperature and anion species on CO2 permeability and CO2/N2 separation coefficient through ionic liquid membranes

The permeability of carbon dioxide (CO₂) through imidazolium-based ionic liquid membranes was measured by a sweep gas method. Six species of ionic liquids were studied in this work as follows: [emim][BF₄], [bmim][BF₄], [bmim][PF₆], [bmim][Tf₂N], [bmim][OTf], and [bmim][dca]. The ionic liquids were supported with a polyvinylidene fluoride porous membrane. The measurements were performed at T = (303.15 to 343.15) K. The partial pressure difference between feed and permeate sides was 0.121 MPa. The permeability of the CO₂ increases with temperature for the all ionic liquid species. Base on solution diffusion theory, it can be explained that the diffusion coefficient of CO₂ in an ionic liquid affects the temperature dependence more strongly than the solubility coefficient. The greatest permeability was obtained with the [bmim][Tf₂N] membrane. The membrane of [bmim][PF₆] presents the lowest permeability.The separation coefficient between CO₂ and N₂ through the ionic liquid membranes was also investigated at the volume fraction of CO₂ at feed side 0.10. The separation coefficient decreases with the increase of temperature for the all ionic liquid species. The membrane of [emim][BF₄] and [bmim][BF₄] gives the highest separation coefficient at constant temperature. The lowest separation coefficient was obtained from [bmim][Tf₂N] membrane which presents the highest permeability of CO₂.     

Tunning CO2 Separation Performance of Ionic Liquids through Asymmetric Anions

This work aims to explore the gas permeation performance of two newly-designed ionic liquids, [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂], in supported ionic liquid membranes (SILM) configuration, as another effort to provide an overall insight on the gas permeation performance of functionalized-ionic liquids with the [C₂mim]⁺ cation. [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂] single gas separation performance towards CO₂, N₂, and CH₄ at T = 293 K and T = 308 K were measured using the time-lag method. Assessing the CO₂ permeation results, [C₂mim][CF₃BF₃] showed an undermined value of 710 Barrer at 293.15 K and 1 bar of feed pressure when compared to [C₂mim][BF₄], whereas for the [C₂mim][CF₃SO₂C(CN)₂] IL an unexpected CO₂ permeability of 1095 Barrer was attained at the same experimental conditions, overcoming the results for the remaining ILs used for comparison. The prepared membranes exhibited diverse permselectivities, varying from 16.9 to 22.2 for CO₂/CH₄ and 37.0 to 44.4 for CO₂/N₂ gas pairs. The thermophysical properties of the [C₂mim][CF₃BF₃] and [C₂mim][CF₃SO₂C(CN)₂] ILs were also determined in the range of T = 293.15 K up to T = 353.15 K at atmospheric pressure and compared with those for other ILs with the same cation and anion’s with similar chemical moieties.     

Hydrophobic ionic liquid‐based ultrasound‐assisted extraction of magnolol and honokiol from cortex Magnoliae officinalis

The hydrophobic ionic liquid of [BMIM][PF₆] was successfully used for the ultrasound‐assisted extraction of hydrophobic magnolol and honokiol from cortex Magnoliae officinalis. To obtain the best extraction efficiencies, some ultrasonic parameters including the concentration of [BMIM][PF₆], pH, ultrasonic power and ultrasonic time were evaluated. The results obtained indicated that the [BMIM][PF₆]‐based ultrasound‐assisted extraction efficiencies of magnolol and honokiol were greater than those of the [BMIM][BF₄]‐based ultrasound‐assisted extraction (from 48.6 to 45.9%) and the traditional ethanol reflux extraction (from 16.2 to 13.3%). Furthermore, the proposed extraction method is validated by the recovery, correlation coefficient (R²) and reproducibility (RSD, n=5), which were 90.8–102.6, 0.9992–0.9998, and 1.6–5.4%, respectively.     

Thin-film TiO2 electrode surface characterization upon CO2 reduction processes

The effect of electrochemical reduction of CO₂ on the structure and morphology of titanium(IV) oxide thin films was examined after a fixed-potential bulk electrolysis process. Films deposited on ITO (Indium-Tin Oxide) substrates were used as the working electrodes and 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]) as solvent and as supporting electrolyte. Grazing incidence X-ray diffraction analysis performed before and after the electrolysis process indicated no microstructural changes of the anatase films. X-ray photoelectron spectroscopy revealed peaks associated with adsorbed carbonate ions at 288 eV and CO₂ species at 293 eV, whereas Ti2p peaks displacements for CO₂-saturated TiO₂/ITO surfaces in [BMIm][BF₄] revealed chemical bonding effects. Auger electron spectroscopy revealed a high carbon content on CO₂-exposed films, and suggested a strong chemisorption of CO₂ and CO₃²⁻ species on the TiO₂/ITO surface in [BMIm][BF₄] solvent system. A significant decrease in carbon content after bulk electrolysis indicated that the CO₂ electroreduction process is not controlled by either diffusion or by adsorption of CO₂ on the TiO₂/ITO electrode surface.     

The Synthesis of Anatase TiO2 Nanoparticles by Solvothermal Method using Ionic Liquid as Additive

The solvothermal reactions of Ti(OiPr)₄ in alcohol using ionic liquid as additive were investigated. In the presence of [BMIM][Cl], [BMIM][Br], [BMIM][NTf₂], [BMIM][SO₃Me], [BMIM][SO₄Me], or [BMIM][OTf] (BMIM = 1‐Butyl‐3‐methylimidazolium), pure anatase nanoparticles were obtained. The controlled hydrolysis of Ti(OiPr)₄ in the presence of ionic liquids to form titanium oxo clusters plays a key role in the formation of anatase nanostructures, and ionic liquids can be repeatedly used to synthesise anatase nanoparticles. However, in the presence of [BMIM][PF₆], [BMIM]₂[Ti(OH)₆] was obtained by an anion exchange reaction.     

Ionic Liquids and Water: Hydrophobicity vs. Hydrophilicity

Many chemical processes rely extensively on organic solvents posing safety and environmental concerns. For a successful transfer of some of those chemical processes and reactions to aqueous media, agents acting as solubilizers, or phase-modifiers, are of central importance. In the present work, the structure of aqueous solutions of several ionic liquid systems capable of forming multiple solubilizing environments were modeled by molecular dynamics simulations. The effect of small aliphatic chains on solutions of hydrophobic 1-alkyl-3-methylimidazolium bis(trifluoromethyl)sulfonylimide ionic liquids (with alkyl = propyl [C₃C₁im][NTf₂], butyl [C₄C₁im][NTf₂] and isobutyl [iC₄C₁im][NTf₂]) are covered first. Next, we focus on the interactions of sulphonate- and carboxylate-based anions with different hydrogenated and perfluorinated alkyl side chains in solutions of [C₂C₁im][C_nF_2n+1SO₃], [C₂C₁im][C_nH_2n+1SO₃], [C₂C₁im][CF₃CO₂] and [C₂C₁im][CH₃CO₂] (n = 1, 4, 8). The last system considered is an ionic liquid completely miscible with water that combines the cation N-methyl-N,N,N-tris(2-hydroxyethyl)ammonium [N_{1 2OH 2OH 2OH}]⁺, with high hydrogen-bonding capability, and the hydrophobic anion [NTf₂]^–. The interplay between short- and long-range interactions, clustering of alkyl and perfluoroalkyl tails, and hydrogen bonding enables a wealth of possibilities in tailoring an ionic liquid solution according to the needs.     

Influence of 1-alkyl-3-methylimidazolium tetrafluoroborate on the lamellar liquid crystal formed by tetraethylene glycol lauryl ether and water

Lyotropic liquid crystals (LLCs) formed in tetraethylene glycol lauryl ether–water system by the addition of 1-alkyl-3-methylimidazolium tetrafluoroborate ([C _n Mim][BF₄], n?=?2, 4, 6, 8, 10) are characterised by polarised optical microscopy and small-angle X-ray scattering techniques. A small number of [C _n Mim][BF₄] molecules can be solubilised in the liquid crystal without changing the lamellar type. These imidazolium salts are considered as an ideal kind of modifiers for the ordered structure. With different lengths of alkyl chains, [C _n Mim][BF₄] molecules appear in various domains of ordered assemblies: in the water layer for [C₂Mim][BF₄], in the water layer as well as in the polar domain for [C₄Mim][BF₄] and in the apolar domain for the other imidazolium salts with long alkyl chains. Diverse distributions of [C _n Mim][BF₄] molecules in the inner structure bring about their specific influence on the lamellar phase. These results enlighten the use of diverse alkyl-substituted imidazolium salts in modulating LLC and other assemblies and also enrich the aggregation behaviour of these assemblies.