Solubility of carbon dioxide in aqueous solutions of diisopropanolamine and methyldiethanolamine

The solubility of carbon dioxide in aqueous solutions of alkanolamines was measured by means of two experimental methods. The solubility of carbon dioxide was measured at 298 K with a static total pressure apparatus in solutions of water + diisopropanolamine (DIPA) having mass fraction of DIPA equal to 10.1%, 11.0% and 33.9%. The density of the water + DIPA solution was measured continuously during the experiments to investigate the changes in density introduced by the absorption of carbon dioxide. A correlation for the density of CO₂-loaded aqueous solutions of DIPA is presented.     

High pressure phase equilibria in methane + waxy systems: 1. Methane + heptadecane

Fluid–fluid and fluid–solid phase equilibrium were experimentally determined under pressure on the system methane + heptadecane using a full visibility cell. Measurements were performed using the synthetic method on mixtures ranging from pure heptadecane to 99% of methane. The liquid–solid phase transitions were investigated up to 90 MPa and fluid phase boundary was studied in the temperature domain from 293 to 373 K. The appearance of a minimum in the three phase (V–L–S) equilibrium curve is discussed and it is shown that the difference in the solid phase structure and the presence of a solid–solid phase transition do not affect significantly the phase diagram determined.     

Phase equilibria for salt-induced lysozyme precipitation: Effect of salt type and temperature

The salt-induced precipitation of lysozyme from aqueous solutions was studied through precipitation assays in which the equilibrium compositions of the coexisting phases were determined. Lysozyme precipitation experiments were carried out at 5, 15 and 25 °C and pH 7.0 with ammonium sulfate, sodium sulfate and sodium chloride as precipitating agents. In these experiments a complete separation of the coexisting phases (liquid and solid) could not be achieved. Nevertheless it was possible to determine the composition of the precipitate. The enzymatic activity of lysozyme in the supernatant phase as well as in the precipitate phase was also determined. The activity balance suggests that there is a relationship between the composition of the true precipitate and the total activity recovery.     

Liquid–liquid equilibrium of ternary systems 1-octyl-3-methylimidazolium hexafluorophosphate + aromatic + aliphatic hydrocarbons

The phase behavior of six ternary systems involving an aromatic hydrocarbon (benzene, toluene or m-xylene), an aliphatic hydrocarbon (nonane or undecane), and an ionic liquid (1-octyl-3-methylimidazolium hexafluorophosphate, [omim][PF₆]) was experimentally studied at 298.15 K and atmospheric pressure, totalizing 26 tie-lines. The main goal is to determine if [omim][PF₆] is a good solvent for the separation of the aromatic and aliphatic compounds, a common operation in the processing of reformed naphtha. All the ternary diagrams are of type 1, with high and wide two-phase regions, which show that [omim][PF₆] is a good solvent for the extraction of aromatic from aliphatic hydrocarbons. The Othmer–Tobias correlation was used for evaluation of the quality of the tie-line data, with good results. The data were correlated with the NRTL model for the activity coefficient, with estimation of new interaction energy parameters by using a modified Simplex method and a composition-based objective function. The results, expressed by root mean square deviations between experimental and calculated compositions, are very satisfactory.     

Isothermal vapour–liquid equilibrium for cyclic ethers with 1-chloropentane

Isothermal vapour–liquid equilibrium measurements for mixtures containing cyclic ethers: tetrahydrofuran, tetrahydropyran, 1,3-dioxolane or 1,4-dioxane and 1-chloropentane at the temperatures of 298.15, 313.15 and 328.15 K are reported. The thermodynamic consistency of the VLE measurements was satisfactorily checked with the van Ness method. Activity coefficients were correlated with Wilson, NRTL, and UNIQUAC equations. The calculated excess Gibbs functions for tetrahydrofuran and tetrahydropyran are negative over the whole composition range while for 1,3-dioxolane and 1,4-dioxane the excess Gibbs functions are positive.     

Isothermal vapour–liquid equilibria in the binary and ternary systems consisting of an ionic liquid, 1-propanol and CO2

Vapour–liquid equilibrium measurements for binary and ternary systems containing carbon dioxide, 1-propanol, and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide or 1-decyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide or 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ionic liquids are presented in this work. The binary CO₂ + 1-decyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide system at 313.15 K at pressure range from 2 to 14.4 MPa was examined. The obtained phase envelop shows that even at low pressure of CO₂ the solubility of the gas in the ionic liquid is high. The ternary phase equilibria were studied at 313.15 K and pressures in the range from 9 to 12 MPa. The ternary phase diagrams show that higher CO₂ pressure diminishes the miscibility gap.     

High pressure phase equilibria in methane + waxy systems. 2. Methane + waxy ternary mixture

Liquid–vapour and fluid–solid phase transitions were experimentally determined under pressure on the system methane + a ternary waxy mixture using a full visibility cell. The wax was an approximately equimolar mixture of n-C₁₆, n-C₁₇ and n-C₁₈, the composition being chosen to obtain a mixture with an average molecular weight similar to heptadecane. Measurements were performed according to the synthetic method on different mixtures ranging from 0 to 99.5 mol% of methane. The liquid–solid phase transitions were investigated up to 100 MPa and fluid phase boundary was studied in the temperature domain from 293 to 373 K. Measurements performed on this pseudo-binary system were compared to the phase diagram of the binary system methane + heptadecane.     

Liquid–liquid equilibrium of (water + 1-propanol + 1-pentanol) system at 298.15 and 323.15 K

Liquid–liquid equilibrium data for the ternary system water + 1-propanol + 1-pentanol have been determined experimentally at 298.15 and 323.15 K using “static–analytic” apparatus involving ROLSI™ samplers. The experimental data are correlated considering both NRTL and UNIQUAC activity coefficient models. The results obtained show the ability of both models for the determination of liquid–liquid equilibrium data of the studied system. The reliability of the experimental tie-line data is determined through the Othmer–Tobias and Bachman equations.     

Vapor pressure measurement for water,methanol, ethanol,and their binary mixtures in the presence of an ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate

Vapor pressure data were measured for water, methanol and ethanol as well as their binary mixtures with an ionic liquid (IL) 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM][DMP]) at varying temperature and IL-content ranging from mass fraction of 0.10–0.70 by a quasi-static method. The vapor pressure data for the IL-containing binary systems were correlated using NRTL equation with average absolute relative deviation (ARD) within 0.0076, and the binary NRTL parameters was used for predicting the vapor pressure of the IL-containing ternary systems with reasonable accuracy. In addition, the infinite activity coefficients of solvents in [EMIM][DMP] and isobaric vapor–liquid equilibrium for IL-containing ternary systems at 101.325 kPa and mass fraction of IL being 0.5 were predicted with the regressed NRTL parameters. The results indicate that ionic liquid [EMIM][DMP] can depress the volatility of the solvents of water, methanol and ethanol but to a varying degree, leading to the variation of relative volatility of a solvent and even removal of azeotrope for water–ethanol mixture.     

Phase equilibrium and thermophysical properties of mixtures containing a cyclic ether and 1-chloropropane

The phase equilibrium, at T = 298.15 and 313.15 K and several thermophysical properties (density, sound velocity, refractive index) at T = 283.15, 298.15 and 313.5 K of mixtures formed by a cyclic ether (tetrahydropyran, tetrahydrofuran) and 1-chloropropane has been studied. Excess Gibbs functions, excess volumes, excess isentropic compressibilities and refractive index deviations have been obtained from the experimental data. Both the molecular characteristics of the pure compounds and the molecular interactions in the mixing process have been used to analyse the results.     

Solubility of selected dibasic carboxylic acids in water,in ionic liquid of [Bmim][BF4], and in aqueous [Bmim][BF4] solutions

The solubilities of three dibasic carboxylic acids (adipic acid, glutaric acid, and succinic acid) in water, in the ionic liquid of 1-butyl-3-methyl-imidazolim tetrafluoroborate ([Bmim][BF₄]), and in the aqueous [Bmim][BF₄] solutions have been measured by a solid-disapperance method. The binodal curve of water + [Bmim][BF₄] was also determined experimentally from solid–liquid–liquid coexistence temperature up to near the upper critical solution temperature. Experimental results showed that each acid-containing binary behaved as a simple eutectic system. The solid–liquid equilibrium (SLE) data were correlated with the NRTL model for each binary system. The NRTL model with these determined binary parameters predicted the solid-disappearance temperatures of the aqueous ternary mixtures containing [Bmim][BF₄] and the dibasic acids to within an average absolute deviation of 2.0%.     

Phase equilibria study of systems composed of refined babassu oil, lauric acid, ethanol, and water at 303.2 K

Deacidification of vegetable oils can be performed using liquid–liquid extraction as an alternative method to the classical chemical and physical refining processes. This paper reports experimental data for systems containing refined babassu oil, lauric acid, ethanol, and water at 303.2 K with different water mass fractions in the alcoholic solvent (0, 0.0557, 0.1045, 0.2029, and 0.2972). The dilution of solvent with water reduced the distribution coefficient values, which indicates a reduction in the loss of neutral oil. The experimental data were used to adjust the NRTL equation parameters. The global deviation between the observed and the estimated compositions was 0.0085, indicating that the model can accurately predict the behavior of the compounds at different levels of solvent hydration.     

Vapour–liquid equilibrium for the systems diethyl sulphide + 1-butene, +cis-2-butene, +2-methylpropane, +2-methylpropene, +n-butane, +trans-2-butene

Isothermal vapour–liquid equilibrium was measured for the systems of diethyl sulphide + 1-butene, +cis-2-butene, and +2-methylpropene at 312.6 K, diethyl sulphide + n-butane was measured at 317.6 K, diethyl sulphide + trans-2-butene at 317.5 K, and diethyl sulphide + 2-methylpropane at 308.0 K. The pressure–temperature–total composition data were converted into pressure–temperature–liquid–vapour composition data using the method of Barker. Error estimates are provided for each variable. The isothermal parameters for the Wilson, NRTL and UNIQUAC activity coefficient models were regressed. The measurements were compared with the predictions by COSMO segment activity coefficient (COSMO-SAC) and UNIFAC.     

Thermodynamics of aqueous solutions of polyvinylpyrrolidone

Densities, viscosities and water activities of aqueous solutions of polyvinylpyrrolidone have been determined experimentally at T=(298.15, 308.15, 318.15 and 328.15) K. From the density data, the apparent specific volume of polymer and the partial specific volume of polymer and water have been calculated. From the viscosity data, the viscosity and number average molecular weight of polymer have been calculated. From the water activity data, the vapour pressure of solutions has been calculated. Densities, viscosities and water activities have been correlated successfully with an general equation which takes into account the influence of the polymer concentration and the temperature.     

Study on solid–liquid phase equilibria in ionic liquid: 1. The solubility of alkali chloride (MCl) in ionic liquid EMISE

This paper reports the solubility of alkali chloride MCl (M is Li, Na and K) in IL EMISE was measured in the temperature range of 293.15 K to 343.15 K. The relationship between solubility, m and temperature T may be expressed in an empiric formula: ln(m/m⁰) = A₁ + A₂T₀/T + A₃T/T⁰, where m⁰ is 1 mol/kg, T⁰ is 1 K. The observed sequence of solubility is LiCl > NaCl > KCl. The fact implies that the less the radius of alkali ion, the greater is its solubility because little ion is easy to get into the interstices of IL EMISE.     

Thermodynamics of aqueous carbohydrate surfactant solutions

The paper deals with the application of the micelle formation theory, developed by Nagarajan and Ruckenstein [R. Nagarajan, E. Ruckenstein, Langmuir 7 (1991) 2934–2969] and Nagarajan [R. Nagarajan, in: K. Esumi (Ed.), Structure–Performance Relationships in Surfactants, Dekker, New York, 1997, pp. 1–81; R. Nagarajan, Adv. Colloid Interface Sci. 26 (1986) 205-264] to various n-alkyl-β-d-glucopyranoside surfactants, differing in the surfactant tail length (n-octyl-β-d-glucopyranoside C₈G₁, n-decyl-β-d-glucopyranoside C₁₀G₁ and dodecyl-β-d-glucopyranoside C₁₂G₁). The model predicts that the carbohydrate surfactant molecules assemble for energetic reasons in spherical bilayer vesicles. The critical micellar concentration as function of the temperature shows a minimum value. The formed micellar aggregates exhibit a broad distribution of sizes. It is demonstrated in this study that the thermodynamic theory in combination with phase separation thermodynamics can be used successfully to described the phase separation, which occurs for the system C₁₀G₁+water and C₁₂G₁+water at low surfactant concentrations.     

Acid gases partial pressures above a 50 wt% aqueous methyldiethanolamine solution: Experimental work and modeling

Aqueous amine solutions are widely used in the industry for acid gas removal. In order to treat natural gas or refinery process streams, an accurate knowledge of solubility data of carbon dioxide, hydrogen sulfide and other sulfur species in aqueous amine solutions is required. In this paper, new equilibrium measurements on 50 wt% aqueous methyldiethanolamine solution with CO₂ and H₂S have been produced. A simple way to correlate the data has been searched and found. First, a model proposed by Posey et al. in 1996, then a Deshmukh–Mather model are used to correlate “vapor–liquid” equilibria. The Posey et al. model lacks accuracy to represent the experimental data, especially for high loadings. The Deshmukh–Mather model shows good agreement as long as the total loading (H₂S + CO₂) does not reach 1.0.