The Cubic-Two-State Equation of State: Cross-associating mixtures and Monte Carlo study of self-associating prototypes

A new equation of state for associating fluids has recently been presented by Medeiros and Tellez-Arredondo, the Cubic-Two-State Equation of State (CTS EoS) [Ind. Eng. Chem. Res. 47 (2008) 5723]. This equation arises from the coupling of the Soave–Redlich–Kwong EoS (SRK) with an association term from a two-state association model. The CTS EoS is polynomial in volume and it is able to describe vapor pressures and molar volume of associating fluids such as water, alcohol and phenol, among others. The equation is also able to describe the liquid–vapor equilibria of their mixtures with alkanes. In this paper, the physical and thermodynamic foundations of the CTS EoS are further investigated. In order to verify its applicability for cross-associating systems, the equation was employed in the prediction of phase equilibria behavior of binary alcohol–alcohol and water–alcohol mixtures. Very good agreement between predictions and experimental phase equilibria data was obtained with very simple combining rules and only one adjustable binary parameter. No additional parameters were necessary to describe ternary systems. With the purpose of checking the model's hypothesis and limitations, the two-state association term was coupled with the hard sphere Carnahan–Starling EoS, forming the CS-TS equation and the association characteristic parameters were determined theoretically for prototype association fluids. Monte Carlo NPT simulations of such fluids were performed and the results were compared with the equation's predictions. The CS-TS was able to describe qualitatively the pvT$pvT$ behavior of the prototype; nevertheless, it is not as accurate as those predictions obtained from the combination CS with Wertheim's association term. It seems that, when adjusting parameters of the CTS EoS to real substances, the discrepancies between the predicted and the real association contribution are dissipated among other adjustable parameters, specially on the dispersive term of the SRK equation. Finally, it is shown that CTS EoS isotherms can only have one or three real bigger roots than the co-volume for positive pressures, similar to cubic equations of state, and then it has the desirable form to describe vapor–liquid phase equilibria of associating compounds mixtures.     

Modeling phase equilibria of alkanols with the simplified PC-SAFT equation of state and generalized pure compound parameters

The simplified PC-SAFT equation of state has been applied to liquid–liquid, vapor–liquid and solid–liquid equilibria for mixtures containing 1- or 2-alkanols with alkanes, aromatic hydrocarbons, CO₂ and water. For the alkanols we use generalized pure compound parameters. This means that two of the physical pure compound parameters, m (segment number) and σ (segment diameter), are obtained from linear extrapolations, since m and mσ³, increase linearly with respect to the molar mass, and moreover, the two association parameters (association energy and association volume) were assumed to be constant for all alkanols. Only the dispersion energy is fitted to experimental data. Thus it is possible to estimate parameters for several 1- and 2-alkanols. The final aim is to develop a group contribution approach for PC-SAFT which is suitable for complex compounds, considering that the motivation of this project is to obtain a thermodynamic model which can be used in the development of sophisticated products such as pharmaceuticals, polymers, detergents or food ingredients. One of the severe limitations in applying SAFT-type equations of state to these compounds is that the procedure for obtaining the pure compound parameters is usually based on fitting to saturated vapor pressure and liquid density data over an extended temperature range. However, such data are rarely available for complex compounds. To verify the new pure compound parameters, comparisons to ordinary optimized alkanol parameters, where all five pure compound parameters were fitted to experimental liquid density and vapor pressure data, were made. The results show that the new generalized alkanol parameters from this work perform at least as well as other alkanol parameter sets.     

Thiourea linked peracetylated glucopyranosyl–anthraquinone conjugate as reversible ON–OFF receptor for fluoride in acetonitrile

A new thiourea linked peracetylated glucopyranosyl–anthraquinone conjugate (L) has been synthesized and characterized. The binding properties of L have been studied with nineteen different anions. The L exhibited selective chromogenic as well as fluorescent chemosensor property toward F⁻ by a ∼13-fold increase in the emission intensity upon binding with F⁻. The minimal detection limit for F⁻ is 185 ± 5 ppb in acetonitrile. Interaction of F⁻ led to a bathochromic shift of 80 nm in the absorption band. An INHIBIT logic gate has been proposed using the output obtained from the fluorescence studies. The structure of the species formed upon the interaction of F⁻ with L has been established by DFT computations.     

Atom transfer radical polymerization on the interior of the P22 capsid and incorporation of photocatalytic monomer crosslinks

We have successfully used atom transfer radical polymerization (ATRP) to form linear and crosslinked polyacrylamide and polyacrylate polymers, constrained within the virus like particle (VLP) derived from the bacteriophage P22. Polymerization of Tris(hydroxymethyl)methylacrylamide was initiated, in a spatially controlled manner, using macroinitiators derived from two different mutants of P22, S39C and K118C. Initiation from the S39C mutant results in spatially confined polymer growth on the interior of P22 while initiation from the K118C site results in a polymerized VLP in which some of the polymer is partially exposed on the outside of the capsid. Using the S39C macroinitiator we have demonstrated polymerization of aminoethyl methacrylate (AEMA) monomers, crosslinked by co-polymerization with the multifunctional monomer [Ru(5-methacrylamido-phenanthroline)₃]²⁺ resulting in an active photocatalytic P22 capsid particle.     

Thermodynamic and spectroscopic study of the interaction of Cu(II), Ni(II), Zn(II) and Ca(II) ions with 2-amino-N-(2-oxo-2-(2-(pyridin-2-yl)ethyl amino)ethyl)acetamide,a pseudo-mimic of human serum albumin

The protonation equilibria of 2-amino-N-(2-oxo-2-(2-(pyridin-2-yl)ethyl amino)ethyl)acetamide ([H₂(556)–N]) and the complexation of this ligand with Cu(II) Ca(II), Zn(II) and Ni(II) have been studied by glass electrode potentiometry and UV–visible spectrophotometry. From pH ∼2.00–11.00, five models for Cu(II) with the following complexes; MLH, ML, MLH₋₁, MLH₋₂ and MLH₋₃ were generated and observed to describe the experimental data equally well as far as the statistical criteria were concerned. The MLH₋₂ complex predominates at physiological pH in all five models, while the MLH₋₁ complex species exists only at low concentration in two models. The coordination in the MLH₋₂ complex suggested the involvement of one amino, two deprotonated peptides and one pyridyl nitrogen atoms. Molecular mechanics (MM) calculations confirmed the MLH₋₂ complex as the most stable species. Speciation calculations, using a blood plasma model, predicted that the Cu(II)–[H₂(556)–N] complex is able to mobilize Cu(II). Octanol/water partition of CuLH₋₂ showed that 30% of the complex went into the octanol phase, hence promoting percutaneous absorption of copper. The complex is a poor mimic of native copper–zinc superoxide dismutase.     

Mixed micelles of homologous perfluoropolyether anionic surfactants in water

The mixtures of sodium and ammonium salts of three homologous perfluoropolyether carboxylic acids having Cl-terminated perfluoroalkyl group (Cl-PFPE) and differing in the average molecular weight (MW) were examined. The surfactants, namely n2, n3 and n4, have two, three and four PFPE units, respectively. Each surfactant was studied alone and in mixture with the other surfactants with the same counterion. NMR chemical shifts were measured for each surfactant and for the mixtures in different concentrations. For a given mixture the micelle composition, X_i, can be determined from the observation of the chemical shifts of the micellar components. It was found that Cl-PFPE surfactant mixtures form in water mixed micelles which contain the surfactants in equilibrium with monomeric species. The analysis of NMR chemical shift variations allowed evaluating the partition of the various surfactants in the mixed aggregates as a function of the total concentration. Composition of mixed micelles resembles ideal mixing predictions particularly at high surfactant concentrations.     

Action des hydrazines fluoroalkylées sur les phosphoallènes: synthèse d’hydrazones N-fluoroalkylées β-phosphonatées

Ten phosphorylated β-hydrazones of structure R₂P(O)C(NNHR_F)CHR₂′ were prepared in 54-91% yield by heating the allenes R₂P(O)CHCCR₂′ with fluorinated hydrazines H₂NNHR_F in chloroform or methanol [R=Ph, OCH₂C(Me)₂CH₂O or OCH₂C(Me)(Pr)CH₂O, R′=H or Me and R_F=CH₂CF₃ or C₆F₅]. Two cyclohexyl derivatives were prepared similarly from R₂P(O)CHCCy. The triphenyl derivatives Ph₂P(O)CH₂C(NNHCH₂CF₃)Ph and Ph₂P(O)CH₂C(NNHC₆F₅)Ph were made in 91 and 68% yield by heating the ketones Ph₂P(O)CH₂C(O)Ph with an ethanol solution of the corresponding hydrazines. The stereochemistry of the hydrazones was determined by multinuclear NMR experiments. Compounds with C(NNHR_F)Me groups exist as a mixture of Z and E isomers, with the Z form predominating (fluorinated group syn to phosphorus). Those with C(NNHR_F)CHMe₂, C(NNHR_F)Cy or C(NNHR_F)Ph groups were formed selectively, the Z isomers being the only products. The results are explained by steric hindrance, the bulkier isopropyl, cyclohexyl or phenyl group disfavouring the E configuration. , , , NMR data, coupling constants and IR data are reported.     

A short, simple and general approach for the synthesis of (3S,4S)-3-methoxy-4-methylamino pyrrolidine and (3S,4R)-3-methoxy-4-methylamino pyrrolidine

A general and efficient stereoselective approach for the synthesis of (3S,4S) and (3S,4R)-3-methoxy-4-methylamino pyrrolidines, a part of the structure of AG-7352, a naphthyridine antitumor agent and quinoline antibacterial compounds has been described.     

Dilute solution behaviour of progressively hydrolyzed polyacrylamide in water-N, N dimethylformamide mixtures

The intrinsic viscosities [η’s] of anionic (hydrolyzed; low and high carboxyl content) and nonionic polyacrylamide (unhydrolyzed) were measured in water-N, N dimethylformamide mixtures at various temperatures. Non-polyelectrolyte behavior of low carboxyl content polyacrylamide was observed in mixed solvent system. The plots of [η] vs. solvent composition in a mixed solvent system pass through minima for both high as well as low carboxyl content polymers but through a maximum for nonionic polyacrylamide. Observed minimum for charged polymers may be attributed to the loss of polymer sites available to interact with solvent for H-bonding interaction between neighboring amide and the acid groups. The maximum for nonionic polymer at the particular solvent composition arises for the most powerful cosolvent effect. Existence of two antagonistic effects is apparent in [η] values of nonionic polymer at various temperatures. Huggins constant (K_H) also indicates a significant variation of cosolvency as a function of solvent composition. Activation parameters of viscous flow were calculated using Frenkel-Eyring equation. The volume related parameter and the shape factor were also computed. Shape factor data indicate that polymer molecules are more or less rigid spheres and are not affected by temperature and composition of solvent.     

Synthesis of lariat organochalcogenoethers based on azacalix[3]arenes for the potentiometric detection of [UO2] ions

The syntheses of organochalcogen-supported azacalix[3]arenes are described in a one-pot manner in satisfactory yields. A remarkably selective potentiometric response was accomplished for uranyl ions over a variety of other metal ions, including alkali (Na⁺, K⁺), alkaline-earth (Mg²⁺, Ca²⁺, Ba²⁺), transition and heavy metal ions (Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Fe³⁺, Zn²⁺, Cd²⁺ and Pb²⁺) using an ion-selective electrode based on compound 3 incorporated into a polymeric (PVC) membrane.     

Synthesis of an original poly(vinylidene fluoride-co-hexafluoropropylene)-g-perfluoropolyether graft copolymer

The synthesis of one original poly(vinylidene fluoride-co-hexafluoropropylene)-g-perfluoropolyether graft copolymer, achieved from the radical terpolymerization of vinylidene fluoride (VDF), hexafluoropropylene (HFP) and a perfluoropolyether (PFPE) bearing an ω-allylic group, is presented. This functional PFPE was synthesized from the condensation of an ω-carboxylic PFPE with an allyl amine. The terpolymerization was initiated by t-butyl peroxide in a perfluorohexane/acetonitrile mixture. NMR spectroscopy enabled the VDF, HFP and allyl amido PFPE base units contained in the terpolymer to be assessed, showing the good incorporation of VDF and the poor reactivity of HFP.     

The regioselectivity of the formation of 2-pyrazolylthiazoles and their precursors from the reaction of 2-hydrazinothiazoles with 4,4,4-trifluoro-1-hetaryl-1,3-butanediones

Reaction of 2-hydrazinothiazoles 1 with 1-thienyl- and 1-furyl-1,3-butanediones 2a,b in methanol in the presence of hydrochloric acid mainly leads to a mixture of pyrazoles 3 and pyrazolines 4 or pyrazoles 3 and 5 in strong acidic conditions. Isomeric hydrazones 6 and pyrazolines 4 were formed and isolated in these reactions in the absence of hydrochloric acid. It has been shown that the regioselectivity in the reaction of diketones 2 with hydrazine 1 is governed by both the concentration of acid and the nature of substituents in the 1,3-diketones 2. Cyclization of hydrazones 6 is shown to occur under milder conditions than dehydration for pyrazolines 4. The new heterocyclic compounds were prepared and fully characterized by NMR spectra and by X-ray analysis for 3c.     

Synthesis and characterisation of bis(pentafluorophenyl)antimony(V) cations, [(C6F5)2SbL3]

Pentacoordinate complex cations of the general formula [(C₆F₅)₂SbL₃]³⁺ stabilized as solid salts in combination with tetraphenylborate (BPh₄), tetrafluorobroate (BF₄) anions, where L=DMSO, Ph₃AsO, PyO, DMF, α-, β- and γ-picoline have been isolated. The newly formed complexes were characterized by elemental analysis, molar conductance measurements, solid-state IR and and NMR. From these results, a five-fold coordination around antimony was required.     

Substitution of Co in YBa2Fe3O8

The accommodation of Co in the oxygen-saturated solid-solution phase YBa₂(Fe_1−zCo_z)₃O_8+w has been investigated by powder X-ray and neutron diffraction techniques, as well as by Mössbauer spectroscopy. Of the nominal composition range 0.00?z?1.00 tested, the solid-solution limit under syntheses at 950°C in is z=0.47(5). No symmetry change in the nuclear and magnetic structures is seen as a consequence of the Co substitution, and the Co atoms are distributed evenly over the two sites that are square-pyramidally and octahedrally coordinated for w=0. The oxygen-saturated samples maintain their oxygen content roughly constant throughout the homogeneity range, showing that Co³⁺ replaces Fe³⁺. Despite the nearly constant value of w, Mössbauer spectroscopy shows that the amount of tetravalent Fe slightly increases with increasing z, and this allows Co to adopt valence close to 3.00 to a good approximation. The magnitude of the antiferromagnetic moment (located in the a,b plane) decreases with z in accordance with the high-spin states of the majority Fe³⁺ and Co³⁺ ions. Bond-valence analyses are performed to illustrate how the structural network becomes increasingly frustrated as a result of the substitution of Fe³⁺ by the smaller Co³⁺ ion. A contrast is pointed out with the substitution of cobalt in YBa₂Cu₃O₇ where it is a larger Co²⁺ ion that replaces smaller Cu²⁺.