Thermodynamics of solution of proto- and mezoporphyrins in N,N-dimethylformamide

This paper describes the results of thermodynamic study of dissolution of proto- and mesoporphyrins in liquid N,N-dimethylformamide (DMF) at different temperatures. Enthalpies of solution and solubility of protoporphyrin dimethylester (PDE) and mesoporphyrin dimethylester (MDE) in DMF have been obtained from T = (298 to 318) K. Free energies, enthalpies, entropies and heat capacities of solution have been computed from the combination of enthalpic and solubility data via the Gibbs–Helmholtz equation. We have shown that for all blood porphyrins this approach reproduces both free energies of solution and solubility values for the physiological temperature range.     

Structure and stability of hydrogen fluoride complexes with N,N-dimethylformamide

The structure, stability, and paths of formation of 11 (HF)_m(DMF)_n heterocomplexes (m = 1–4, n = 1, 2) were studied in terms of the B3LYP/6-31++G(d, p) density functional calculation. The results of this calculation suggest that: a) addition of hydrogen fluoride molecules to the (HF)_mDMF cyclic fragment is the basic tendency in complex formation in the HF-DMF system; b) data about the structure and properties of stable molecular forms that prevail in N,N-dimethylformamide solutions of hydrogen fluoride can be obtained by quantum chemical calculations for (HF)_mDMF complexes (m = 5–10).     

Enthalpies of interaction of urea in mixtures of water and N,N-dimethylformamide at 25°C

Enthalpies of dilution of urea dissolved in mixtures of water and N,N-dimethylformamide with mole fractions of water 0.33, 0.50 and 0.67, respectively, have been measured calorimetrically at 25°C. From these, enthalpic interaction coefficients were obtained. The present results are compared with those of urea dissolved in pure water and in pure N,N-dimethylformamide.     

Densities and excess molar volumes for binary mixtures of N,N-dimethylformamide+ 1,2-dimethoxyethane

Densities are reported for N,N-dimethylformamide and 1,2-dimethoxyethane binary mixtures at different mole fractions covering the whole miscibility range and at 19 temperatures ranging from –10 to 80°C. The experimental density data have been fitted by empirical relations and the excess volumes by a Redlich-Kister equation. The 11 N,N-dimethylformamide and 1,2-dimethoxyethane adduct appears to be stable throughout the temperature range. A comparison with other DMF containing mixtures is made.     

Understanding the efficacy of N,N-dimethylformamide and oxalyl chloride combination as chemoselective O-formylating agent: An unified experimental and theoretical study

We have developed a simple but efficient synthetic protocol for the O-formylation of a wide range of aromatic hydroxyl/phenolic substrates using an N,N-dimethylformamide (DMF) and oxalyl chloride [(COCl)₂] combination in dichloromethane (DCM) as solvent at ambient temperature. The DMF/(COCl)₂ combination was found to be highly chemoselective for the aromatic/phenolic hydroxyl group over aliphatic hydroxyl or aromatic amine/thiol groups. This chemoselectivity of DMF/(COCl)₂ combination towards O-formylation of aromatic alcohols was explained on the basis of outcomes of both experimental and density functional theory–based theoretical studies.     

X-ray structural studies on microscopic mixing in binary mixtures of dimethyl sulphoxide with acetonitrile and N,N-dimethylformamide

The liquid structures of binary acetonitrile (AN)–dimethyl sulphoxide (DMSO) and N,N-dimethylformamide (DMF)–DMSO mixtures were investigated by the X-ray scattering method. Comparison of the X-ray scattering data of AN–DMSO liquid mixtures with those of neat AN and DMSO revealed that the intermolecular AN–DMSO interactions are practically not detected; that is, the X-ray scattering data of the liquid mixtures are well reproduced by summing up those of neat AN and DMSO weighted by their mole fractions. The same applies for DMF–DMSO mixtures. Thus, each component solvent molecule independently forms self-assembled clusters in the liquid mixtures, the structures of which are the same as those in the neat liquids. The clusters are mixed to form macroscopically homogeneous liquid mixtures. The thermodynamic quantities on mixing process for the AN–DMSO, DMF–DMSO and AN–DMF systems in the literature are well elucidated on the basis of the microscopic structure of the liquid mixtures.     

Capillary electrophoresis in N,N-dimethylformamide

N,N-Dimethylformamide (DMF) is a dipolar protophilic solvent with physicochemical properties that makes it suitable as solvent for capillary electrophoresis (CE). It is prerequisite for the proper application of CE to adjust and to change the pH of the background electrolyte (BGE) in a defined manner. This was done in the present work using benzoic acid-benzoate by selecting different concentration ratios of acid and salt, and calculating the theoretical pH from the activity-corrected Henderson-Hasselbalch equation. The mobilities of the analytes (chloro- and nitro-substituted phenolates) were found to follow reasonably well the typical sigmoid mobility versus pH curve as predicted by theory. The actual mobilities and pK(a) values (at 25 degrees C) of the analytes were derived from these curves. pK(a) values were in the range of 11.1-11.7, being thus 3-4.4 units higher than in water. This pK(a) shift is caused by the destabilization of the analyte anion and the better stability (solubility) of the molecular analyte acid in DMF, which overcome the higher basicity of DMF compared to water. Absolute mobilities were calculated from the actual mobilities; they were between 32x10(-9) and 42x10(-9) m(2)/Vxs. Slight deviations of the measured mobilities from the theoretical mobility versus pH curve were discussed on the bases of ion pairing and heteroconjugation and homoconjugation of either buffer components or buffer components and analytes. Heteroconjugation was used as a mechanism for the electrically driven separation of neutral analyte molecules in a BGE where salicylate acted as complex forming ion. Rough estimation of the complexation constants for the phenolic analytes gave values in the range of 100-200 L/mol. Addition of water to the solvent decreased the effect of heteroconjugation, but it was still present up to the surprisingly high concentration of 20% water. Electrophoretically relevant parameters like ionic mobilities and pK(a) values, and conjugation and ion pairing are dependent on the water content of the solvent. The water uptake of DMF was measured when exposed to humidity of ambient air. The resulted behavior of the water uptake was found rather similar to that for acetonitrile and methanol.     

A calorimetric study ofN,N-dimethylformamide complexes of copper(II) in acetonitrile

Complex formation of copper(II) with N,N-dimethylformamide(DMF) has been investigated calorimetrically in acetonitrile at 25°C. Calorimetric titration curves obtained are explained in terms of formation of [Cu(dmf) _n ]²⁺ (n=1–4, 6) and their formation constants, enthalpies and entropies were determined. Formation of [Cu(dmf)₅]²⁺ is uncertain. The stepwise enthalpies S ₃ ⁰ and entropies S _n ⁰ at each consecutive step are all negative except for S ₃ ⁰ . The overall enthalpies of formation of [Cu(dmf)₆]²⁺ is –(77.8±5.4) kJ-mol^–1, which is compared with the enthalpy of transfer of copper(II) ion, H _t ^o =–79.7 kJ-mol^–1, from acetonitrile to DMF.     

LiNO3在DMF中的离子溶剂化和离子缔合的红外光谱

LiNO3在DMF中的离子溶剂化和离子缔合的红外光谱;硝酸锂;N;N-二甲基甲酰胺;离子溶剂化;离子缔合;红外光谱法     

IR spectroscopic study of ion-molecular interactions in the methanesulfonic acid—N,N-dimethylformamide system

Complex formation in the methanesulfonic acid (MSA)-DMF system was studied by Multiple Attenuated Total Reflectance (MATR) IR spectroscopy at 30°C within the composition range from neat MSA up to neat DMF. Depending on the ratio of components, two types of complexes with a strong quasi-symmetrical H bond (1 and2) are formed. The uncharged complex1 is a quasi-ion pair with the (O…H…O) bridge. Complex2 is formed by a protonated DMF molecule and the (A…H…A)⁻ anion bound as an ion pair. It is established that complexes1 are solvated by DMF molecules in an excess of a base. Solvation or2 in an excess of an acid corresponds to a change from contact to contact-separated ion pairs. Continuous absorption spectra of charged and uncharged complexes1 and2 were obtained. The schemes of acid-base interactions in the MSA-DMF and HCl-DMF systems were compared. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2484–2489, December, 1998.     

Partial molal heat capacities of sodium perchlorate in N,N-dimethylformamide from 10 to 75°C

Enthalpies of solution of NaClO₄ have been measured calorimetrically in the aprotic solvent N,N-dimethylformamide at several temperatures ranging from 5 to 80°C. The data have been extrapolated to infinite dilution to obtain standard enthalpies of solution. The integral enthalpy of solution method was used to evaluate the standard partial molal heat capacity c _p2 ^° of NaClO₄ in N,N-dimethylformamide as a function of temperature. This function is almost temperature invariant in N,N-dimethylformamide, in contrast to its complex behavior in aqueous and methanolic solutions. This suggests that ionic heat capacities are extremely sensitive to the structure of solutions and that this function can be used as a probe for studying the structure of electrolytic solutions. The complex temperature dependence of c _p2 ^° in water and methanol can be explained in terms of the decreased hydrogen bonding and dielectric constant of the solvents at the higher temperatures. The data show that one must be cautious in interpreting single-temperature heat capacities of transfer between solvents.This paper was taken from the work submitted by Shuya Chang to the Graduate School of the University of Miami, in partial fulfillment of the requirement for the Master of Science Degree.     

A theoretical study of the interactions between N,N-dimethylformamide and xylenes

The ab initio and density functional (DFT) methods were performed on binary systems of N,N-dimethylformamide (DMF) with xylenes (o-, or m-, or p-xylene), and seven stable configurations were obtained with no imaginary frequencies. To obtain the interaction energies of these complexes, single-point energy calculations with basis set superposition error (BSSE) correction were carried out at B3LYP/6-31G* and MP2/6-31G* levels. The structures, Chelpg (charges from electrostatic potentials using a grid-based method) charge distribution and bond characteristics of the mentioned complexes were calculated. The results indicated the presence of double C–H···O hydrogen bonds between DMF and xylenes in these complexes and the interaction energies of hydrogen bonding between DMF and xylene systems decreased in the following sequence: DMF–o-xylene: a1 > DMF–m-xylene: b1 > DMF–p-xylene: c1.     

A theoretical study of the interactions between N, N-dimethylformamide and aromatic hydrocarbons

The B3LYP and MP2 methods with 6-31G* basis set were used to predict the geometries of N, N-dimethylformamide (DMF) dimer and DMF–aromatic hydrocarbons interaction systems. A total of 10 conformers were obtained with no imaginary frequencies, respectively. The interaction energies of these binary mixtures have been obtained. The analyses of chelpg charge distribution and the atoms in molecules theory (AIM) were used to analyze the nature of the interaction. The results show the presence of hydrogen bonds between DMF and aromatic hydrocarbons. The interaction between DMF and benzonitrile is the strongest with the interaction energy of −21.58 kJ mol⁻¹ (BSSE corrected), and the intensity order of interactions is DMF–benzonitrile: d2 > DMF–DMF: a2 > DMF–toluene: c1 > DMF–benzene: b2.     

Crystallization-driven self-assembly of isotactic polystyrene in N,N-dimethylformamide

Herein we demonstrate crystallization-driven self-assembly of isotactic polystyrene(i PS) with high isotacticity and narrow molecular weight distribution and crystallization-induced switching of the morphology of i PS aggregates in N, N-dimethylformamide(DMF). The formation and morphology switching of the self-assembled aggregates of i PS are investigated by means of dynamic light scattering(DLS), scanning electron microscopy(SEM), differential scanning calorimetry(DSC) and wide angle X-ray diffraction(WXRD). The results reveal that cooling DMF solution of i PS promotes i PS chains to self-assemble into spherical aggregates with a gelled core cross-linked by microcrystals, which is surrounded by solvent-swollen corona. Furthermore, crystallization induces the deformation of i PS aggregates from spherical to plate-like or nest-like.     

Conductivity studies on some alkali metal iodides in aqueous N,N-dimethylformamide solutions at 298.15K

Summary Conductance measurements for NaI, KI, RbI, and CsI in water/N,N-dimethylformamide mixtures over the whole composition range at 298.15K are reported. The data were analyzed employing theFuoss-Justice equation in terms of limiting molar conductances (_o),Walden products (_o), and association constants (K _A). The results indicate that the salts are weakly associated in the above solvent mixture. Variation in theWalden products with solvent composition are briefly discussed. The results were also compared with values reported previously for some alkali metal chlorides and bromides.

---

Untersuchungen zur elektrischen Leitfähigkeit einiger Alkalimetalliodide in wäßrigen N,N-Dimethylformamidlösungen bei 298.15K

Zusammenfassung Die elektrische Leitfähigkeite von NaI, KI, RbI und CsI wurde in N,N-Dimethylformamid-Wasser-Mischungen verschiedener Zusammensetzung bei 298.15K gemessen. Die erhaltenen Daten wurden analysiert und bezüglich der Grenzäquivalenzleitfähigkeiten (_o), derWalden-Produkte (_o) und der Assoziationskonstanten (K _A) ausgewertet. Die Ergebnisse zeigen, daß diese Salze in den verwendeten Lösungsmittelgemischen nur schwach assoziiert sind. Die Änderungen derWalden-Produkte in Abhängigkeit der Lösungsmittelzusammensetzung werden kurz diskutiert. Abschließend werden die Resultate mit Ergebnissen früherer Messungen, in denen das Verhalten von Alkalimetallchloriden und Alkalimetallbromiden untersucht wurde, verglichen.

     

Palladium-Catalyzed Aminocarbonylation of Aryl Halides with N,N-Dialkylformamide Acetals

We developed a protocol for the palladium-catalyzed aminocarbonylation of aryl halides using less-toxic formamide acetals as bench-stable aminocarbonyl sources under neutral conditions. Various aryl (including heteroaryl) halides reacted with N,N-dialkylformamide acetals in the presence of a catalytic amount of tris(dibenzylideneacetone)dipalladium(0)-chloroform adduct and xantphos to give the corresponding aromatic carboxamides at 90–140 °C without any activating agents or bases in up to quantitative chemical yield. This protocol was applied to aryl bromides, aryl iodides, and trifluoromethanesulfonic acid, as well as to relatively less-reactive aryl chlorides. A wide range of functionalities on the aromatic ring of the substrates were tolerated under the aminocarbonylation conditions. The catalytic aminocarbonylation was used to prepare the insect repellent N,N-diethyl-3-methylbenzamide as well as a synthetic intermediate of the dihydrofolate reductase inhibitor triazinate.     

Dielectric relaxation studies of aqueous N,N-dimethylformamide using a picosecond time domain technique

The dielectric relaxation studies of N,N-dimethylformamide at thirteen concentration in aqueous solutions have been carried out using a time domain reflectometry technique in the frequency range 10 MHz to 10 GHz. The dielectric parameters and excess dielectric properties have also been determined from 5 to 40°C. The Luzar theory was applied to compute the cross correlation terms for the mixture. It adequately reproduces the experimental values of the static dielectric constants. The Bruggeman model for the nonlinear case has been fitted to the dielectric data for mixtures.     

Microwave dielectric spectra and molecular relaxation in formamide-N,N-dimethylformamide binary mixtures

The dielectric dispersion and absorption spectra of formamide (FA), N,N-dimethylformamide (DMF) and their binary mixtures are investigated in the frequency range of 500 MHz to 20 GHz at 30 °C in view of the organic synthesis by microwaves heating using amides solvents. The concentration dependent values of molecular reorientation relaxation times lower than that of the ideal mixing behaviour have been attributed to the cooperative dynamics of H-bonded FA–DMF structures. The molar ratio of stable adduct is 2:1 of FA to the DMF, which is determined from the concentration dependent excess static dielectric constant and the relaxation time plots of these binary mixtures. Electrode polarization effect and ionic conduction in FA and DMF were investigated from their dielectric dispersion spectra in the low frequency region of 20 Hz to 1 MHz.     

反相高效液相色谱法测定荧光增白剂CBS中N,N-二甲基甲酰胺的残留量

建立了反相高效液相色谱外标法检测荧光增白剂CBS(即CF-351)中N,N-二甲基甲酰胺(DMF)残留量的方法。使用Accurasil C18(150 mm×4.6 mm,5 μm)反相液相色谱柱,以甲醇-水为流动相梯度洗脱,流速为1.0 mL/min,检测波长为205 nm,柱温为30 ℃,进样量为5 μL。在上述条件下,在DMF质量浓度为0.19～141 mg/L范围内,其峰面积与质量浓度的线性关系良好。在加标水平（用质量分数表示）为0.2344%和0.4678%时,回收率为98.4%～107.3%。本方法最低检出限(LOD)为0.019%（质量分数）,峰面积的相对标准偏差(RSD)为1.73%。此方法可快速、准确地测定出荧光增白剂CBS中DMF的残留量。     

Enthalpies of solvation of alkylated uracils in water,nonaqueous and mixed solvents

The enthalpies of solution of uracil and its alkylated derivatives in water, methanol, N,N-dimethylformamide (DMF) and water+DMF mixtures were measured at 25°C. The enthalpies of solvation were determined. The enthalpies of cavity formation, corresponding to the enthalpies of solvent-solvent interactions were calculated and the enthalpies of solute-solvent interactions were obtained. The presence of the alkyl groups was found to have different effects on the enthalpy of interaction depending on the position and size of the substitution. The effect of alkylation at the nonpolar side of the uracil ring was found to arise mostly from the enhancement of the van der Waals interactions. The alkyl substitutions at the polar side resulted also in the removal of the solvent molecules interacting specifically with the polar groups of uracil. The enthalpy of those specific interactions was determined and found to be stronger in methanol and DMF than in water. Enthalpies of solvation in the binary water+DMF solvent were found to depend in a nonlinear way on the solvent composition. The nonlinearities in the water-rich region were found to arise from the decay of the hydrophobic hydration of the solutes with the increasing DMF content. The substitution of two methyl groups caused the uracil molecule to bahave as a predominantly hydrophobic solute. The nonlinearities in the DMF-rich region were found only for those solutes which can form hydrogen bonds with DMF.