纳米受限下溶质水化结构的分子模拟

利用分子动力学模拟研究了五种不同种类的溶质分子(K+, Mg2+, Cl-, K-和K0)在直径为0.60-1.28 nm的纳米碳管内的水化结构. 模拟结果揭示了单电荷溶质、双电荷溶质和中性溶质在受限条件下具有不同的水化行为. 单价溶质的配位数只有在直径不大于0.73 nm的纳米碳管内才会明显减少. 和带有电荷的溶质不同, 中性溶质的配位数对纳米碳管直径的改变非常敏感, 并且随着管径的减小而迅速减少. 模拟结果还表明带单价正电荷的溶质(K+)第一配位层水分子的取向结构会随着纳米碳管直径的改变发生变化, 而其他溶质配位层取向结构在本文所涉及的纳米碳管内都几乎和体相中一致. 在直径大于1.0 nm的纳米碳管中, K+的配位层取向结构有序度随着管径的减小而单调下降, 但是在直径小于1.0 nm的纳米碳管中, 随着碳管管径的减小而迅速上升. 在两个最窄的纳米碳管内, 其结构有度甚至高于体相. 双电荷溶质的水化结构在本文所研究的碳管直径范围内和体相完全一致, 即使在直径只有0.6 nm的碳管内也无任何改变.     

碳纳米管修饰碳纤维超微圆柱电极的研制与应用

制作了碳纳米管修饰碳纤维组合电极(EUME-CNT),研究了木犀草素在EUME-CNT上的电化学行为,并且通过优化测定参数,建立了木犀草素的电化学分析方法。检出限达到4×10-7mol/L,线性范围为6×10-7~1×10-5mol/L。     

Electrochemical parameters of ethamsylate at multi-walled carbon nanotube modified glassy carbon electrodes

In this paper, some electrochemical parameters of ethamsylate at a multi-walled carbon nanotube modified glassy carbon electrode, such as the charge number, exchange current density, standard heterogeneous rate constant and diffusion coefficient, were measured by cyclic voltammetry, chronoamperometry and chronocoulometry. The modified electrode exhibits good promotion of the electrochemical reaction of ethamsylate and increases the standard heterogeneous rate constant of ethamsylate greatly. The differential pulse voltammetry responses of ethamsylate were linearly dependent on its concentrations in a range from 2.0 x 10(-6) to 6.0 x 10(-5) mol L(-1), with a detection limit of 4.0 x 10(-7) mol L(-1).     

Enhanced electrostatic modulation of ionic diffusion through carbon nanotube membranes by diazonium grafting chemistry

A membrane structure consisting of an aligned array of open ended carbon nanotubes (7 nm i.d.) spanning across an inert polymer matrix allows the diffusive transport of aqueous ionic species through CNT cores. The plasma oxidation process that opens CNTs tips inherently introduces carboxylic acid groups at the CNT tips, which allows for a limited amount of chemical functional at the CNT pore entrance. However for numerous applications, it is important to increase the density of carboxylic acid groups at the pore entrance for effective separation processes. Aqueous diazonium-based electrochemistry significantly increases the functional density of carboxylic acid groups. pH dependent dye adsorption–desorption and interfacial capacitance measurements indicate 5–6 times increase in functional density. To further control the spatial location of the functional chemistry, a fast flowing inert liquid column inside the CNT core is found to restrict the diazonium grafting to the CNT tips only. This is confirmed by the increased flux of positively charged with anionic functionality. The electrostatic enhancement of ion diffusion is readily screened in 0.1 M electrolyte solution consistent with the membrane pore geometry and increased functional density.     

Molecular simulation study of temperature effect on ionic hydration in carbon nanotubes

Molecular dynamics simulations have been performed to investigate the hydration of Li(+), Na(+), K(+), F(-), and Cl(-) inside the carbon nanotubes at temperatures ranging from 298 to 683 K. The structural characteristics of the coordination shells of ions are studied, including the ion-oxygen radial distribution functions, the coordination numbers, and the orientation distributions of the water molecules. Simulation results show that the first coordination shells of the five ions still exist in the nanoscale confinement. Nevertheless, the first coordination shell structures of cations change more significantly than those of anions because of the preferential orientation of the water molecules induced by the carbon nanotube. The first coordination shells of cations are considerably less ordered in the nanotube than in the bulk solution, whereas the change of the first coordination shell structures of the anions is minor. Furthermore, the confinement induces the anomalous behavior of the coordination shells of the ions with temperature. The first coordination shell of K(+) are found to be more ordered as the temperature increases only in the carbon nanotube with the effective diameter of 1.0 nm, implying the enhancement of the ionic hydration with temperature. This is contrary to that in the bulk solution. The coordination shells of the other four ions do not have such behavior in the carbon nanotube with the effective diameter ranging from 0.73 to 1.00 nm. The easier distortion of the coordination shell of K(+) and the match of the shell size and the nanotube size may play roles in this phenomenon. The exchange of water molecules in the first coordination shells of the ions with the solution and the ion diffusion along the axial direction of the nanotube are also investigated. The mobility of the ions and the stability of the coordination shells are greatly affected by the temperature in the nanotube as in the bulk solutions. These results help to understand the biological and chemical processes at the high temperature.     

Pore characterization of assembly-structure controlled single wall carbon nanotube

Single wall carbon nanotube (SWCNT), which has bundle structure and entangled structure, was untangled and cut by sonication in hydrogen peroxide (H₂O₂) solution. The untangled state of SWCNT was examined by SEM, TEM, Raman spectroscopy and N₂ adsorption. It was confirmed that the surface area of sonicated nanotubes strongly depended on the sonication time. The BET specific surface area (SSA) of nanotubes sonicated for 3 h was maximum. The SSA decreased at 6 h or more of sonication time. These results indicated that the bundle structure was untangled and the cap of SWCNT was opened. Thus, N₂ molecules can access the most efficiently inside of the SWCNT sonicated for 3 h. On the contrary, the sonication treatment for 6 h or more decomposed the nanotubes to produce amorphous carbon, evidenced by TEM and SEM observation; the amorphous carbon blocked the open pore sites such as the internal pore spaces and interstitial pores.     

双氯芬酸钠在多壁碳纳米管修饰电极上的电化学行为及其应用

应用循环伏安法和线性扫描伏安法研究了双氯芬酸钠在多壁碳纳米管修饰电极上的电化学行为,建立了一种直接测定双氯芬酸钠的电分析方法.在0.1 mol/L HClO4溶液中,双氯芬酸钠的氧化峰电位在0.38 V(vs Ag/AgCl),峰电流与浓度在2.0×10-7 mol/L～7.0 × 10-6 mol/L范围内呈线性关系,开路富集3 min后检出限为9.0×10-8 mol/L.5×10-6 mol/L双氯芬酸钠溶液平行测定10次的相对标准偏差(RSD)为4.5%.已用于扶他林片剂中双氯芬酸钠的测定.     

Direct electron transfer of glucose oxidase immobilized in an ionic liquid reconstituted cellulose–carbon nanotube matrix

Conductive cellulose-multiwalled carbon nanotube (MWCNT) matrix with a porous structure and good biocompatibility has been prepared using a room temperature ionic liquid (1-ethyl-3-methylimidazolium acetate) as solvent. Glucose oxidase (GOx) was encapsulated in this matrix and thereby immobilized on a glassy carbon surface. The direct electron transfer and electrocatalysis of the encapsulated GOx has been investigated using cyclic voltammetry and chronoamperometry. The GOx exhibited a pair of stable, well defined and nearly symmetric reversible redox peaks. The experimental results also demonstrate that the immobilized GOx retains its biocatalytic activity toward the oxidation of glucose and therefore can be employed in a glucose biosensor. The results show that the bioelectrode modified by the cellulose-MWCNT matrix has potential for use in biosensors and other bioelectronics devices.     

Reversible electrochemistry of DNA on multi-walled carbon nanotube modified electrode

Calf thymus DNA was electrochemically oxidized at a multi-walled carbon nanotube modified electrode. The potentials for DNA oxidation at pH 7.0 were 0.71 and 0.81 V versus SCE, corresponding to the oxidation of guanine and adenine residues, respectively. The initial 6e-oxidation of adenine, observed in the first scan, resulted a quasi-reversible 2e-redox process of the oxidation product in the following scans.     

去甲肾上腺素在多壁碳纳米管修饰玻碳电极上的电化学行为

动物体内的去甲肾上腺素(NE)含量变化反映了肢体神经系统植物交感神经的活动状况,在临床和基础研究中非常重要[1-3]。用化学修饰电极研究儿茶酚胺类神经递质的电化学行为以及对其进行测定是目前分析化学比较活跃的研究领域[4-6]。利用羧基化后的多壁碳纳米管(MWC-NT)对电极表面     

A novel magnetic ionic liquid modified carbon nanotube for the simultaneous determination of aryloxyphenoxy-propionate herbicides and their metabolites in water

A reliable, sensitive, rapid and environmentally friendly analysis procedure for the simultaneous determination of the analytes with a wide range of polarity in the environmental water was developed by coupling dispersive magnetic solid-phase extraction (d-MSPE) with high-performance liquid chromatography (HPLC)–diode array detector (DAD) and ultra-high pressure liquid chromatography (UHPLC)-triple quadrupole mass spectrometer (MS/MS), in this work. Magnetic ionic liquid modified multi-walled carbon nanotubes (m-IL-MWCNTs) were prepared by spontaneous assembly of magnetic nanoparticles and imidazolium-modified carbon nanotubes, and used as the sorbent of d-MSPE to simultaneously extract aryloxyphenoxy-propionate herbicides (AOPPs) and their polar acid metabolites due to the excellent π–π electron donor–acceptor interactions and anion exchange ability. The factors, including the amount of sorbent, pH of the sample solution, extraction time and the volume of elution solvent were investigated. Under the optimized conditions, the proposed d-MSPE coupling to HPLC–DAD system had a satisfactory performance, the limits of detection (LODs, defined as the signal to noise ratio of 3) and the limits of quantification (LOQs, defined as the signal to noise ratio of 10) for analytes in Milli-Q water were in the range of 2.8–14.3 and 9.8–43.2 μg L⁻¹ respectively. Calibration curves were linear (r² > 0.998) over the concentration range from 0.02 to 1 mg L⁻¹. The recoveries of the eight analytes ranged from 66.1 to 89.6% with the RSDs less than 8.6%. In order to extend the method in extremely low concentration analysis, d-MSPE-UHPLC–MS/MS was investigated, which showed better performance in terms of limit of detection and analysis time.     

Probing the electrochemical double layer of an ionic liquid using voltammetry and impedance spectroscopy: A comparative study of carbon nanotube and glassy carbon electrodes in [EMIM][EtSO4]

Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) are compared as techniques for analyzing double layer capacitances of ionic liquids (ILs) at the surfaces of two carbon-based electrodes. These systems are relevant for energy storage supercapacitors and often are associated with unconventional electrochemical properties. Certain theoretical and experimental aspects of CV and EIS necessary for quantitative evaluation of the capacitance characteristics of such systems are explored. The experiments use 1-ethyl-3-methyl imidazolium ethylsulfate as a model IL electrolyte in combination with a porous electrode of carbon nanotubes (CNTs). The results are compared with those obtained with a nonporous glassy carbon (GC) electrode. The time is constant, and hence the power delivery characteristics of the experimental cell are affected by the electrolyte resistance and residual faradaic reactions of the IL, as well as by the spatially inhomogeneous electrode surfaces. It is shown that adequate characterization of these IL-electrode systems can be achieved by combining CV with EIS. A phenomenological framework for utilizing this combination is discussed.     

Molecular dynamics simulation of polyethylene on single wall carbon nanotube

Molecular dynamics simulations are carried out on the isothermal crystallization process of single polyethylene chains with different chain lengths on the single wall carbon nanotube. This process is summarized as two steps, i.e., adsorption and orientation, and the bond-orientational order parameter is used to show the details of this process. The results show that the attractive van der Waals interactions control the adsorption and orientation of polyethylene on single wall carbon nanotube, and as the chain length increases, more microstructures appear in the last ordered structure. The stems of the ordered structure align parallel to the single wall carbon nanotube axis.     

Molecular dynamics simulation of anticancer drug delivery from carbon nanotube using metal nanowires

In this study, we have investigated delivery of cisplatin as the anticancer drug molecules in different carbon nanotubes (CNTs) in the gas phase using molecular dynamics simulation. We examined the shape and composition of the releasing agent by using the different nanowires and nanoclusters. We also investigated the doping effect on the drug delivery process using N-, Si, B-, and Fe-doped CNTs. Different thermodynamics, structural, and dynamical properties have been studied by using the pure and different doped CNTs in this study. Our results show that the doping of the CNT has significant effect on the rate of the drug releasing process regardless of the composition of the releasing agent. © 2019 Wiley Periodicals, Inc.     

聚乙烯链在碳纳米管侧壁吸附的动力学模拟研究

利用经典的分子动力学模拟方法对聚乙烯(PE)分子在两种不同类型的碳纳米管(CNT)中的吸附进行了研究. 计算了两者之间的扩散系数和相互作用能; 利用PE链自身的扭转角分布和取向参数对PE链构象进行了分析. 结果表明, PE链可以在CNT上很好的吸附, 且PE的构象和吸附位置主要与温度和CNT的半径有关, 与管的类型关系不大.     

阿奇霉素在多壁碳纳米管修饰电极上的电化学行为及其测定

运用循环伏安法与线性扫描伏安法研究了阿奇霉素在多壁碳纳米管修饰玻碳电极上的电化学行为,建立了一种直接测定阿奇霉素的电化学分析方法。结果表明,与裸玻碳电极相比,多壁碳纳米管修饰电极能显著提高阿奇霉素的氧化峰电流,阿奇霉素的电极过程完全不可逆,存在典型的吸附特性。在优化的实验条件下,氧化峰电流与阿奇霉素浓度在3.0×10-7～2.5×10-5 mol/L和2.5×10-5～5.0×10-4 mol/L范围内呈现良好的线性关系,检出限为1.0×10-7 mol/L。     

水合肼在多壁碳纳米管修饰电极上的电化学行为及测定

报道了水合肼在碳纳米管修饰电极上的电化学行为以及水合肼测定的新方法。与裸玻碳电极相比,多壁碳纳米管修饰玻碳电极使水合肼的氧化峰电流显著提高,同时氧化过电位降低,测定灵敏度大为提高。优化了底液、pH、修饰剂量等测定条件。在最佳条件下,该修饰电极测定水合肼的线性范围为2.9×10-8~9.8×10-4mol/L,线性相关系数为-0.9945,检出限为1.0×10-9mol/L。对1.0×10-4mol/L的水合肼平行测定10次的相对标准偏差为4.4%。此方法已用于模拟水样中水合肼的测定。     

First-principles study of a new type nanojunction: Finite length carbon chain inserted into half of a carbon nanotube

Based on first-principles calculations, we investigate the structure and electronic properties of a carbon atomic chain in finite length inserted into half of a single walled carbon nanotube (SWCNT), which we called half chain@SWCNT or more generally HCS. Comparing the optimized structure of HCS with that of the same chiral indices SWCNT and all carbon chain inserted SWCNT, we find that the geometry of the tube in HCS is slightly altered due to the weakly interacting between the inserted chain and the outer tube wall of HCS. Our calculation of band structure indicates that the armchair (5, 5) HCS exhibits metallic character, which is as that of (5, 5) SWCNT and all carbon chain inserted (5, 5) SWCNT. The zigzag (8, 0) and (9, 0) HCSs have small change in the energy gap compared to the corresponding pristine ones. Due to the downshift of conduction bands originating from the carbon chain, the calculation of band structure shows that chiral (6, 4) HCS is a semiconductor system with a small band gap of 0.94 eV, less than 1.125 eV in pristine SWCNT. The studied HCSs with unique structure and electronic property may construct a new generation nanoscale junctions without the usual heptagon–pentagon defect pair considerations.     

Molecular dynamics simulation of thymine glycol-lesioned DNA reveals specific hydration at the lesion

One nanosecond molecular dynamics (MD) simulation of a thymine glycol (TG)-lesioned part of human lymphoblast AG9387 was performed to determine structural changes in DNA molecule caused by the presence of a lesion. These changes can be significant for proper recognition of lesions by a repair enzyme. Thymine glycol is the DNA oxidative lesion formed by addition of OH radicals to C5 and C6 atoms of the thymine base. This lesion is known as causing Cockayne Syndrome-inherited genetic disorder. Distribution of water molecules in a hydration shell around the DNA molecule was analyzed for its contribution to the recognition of the TG lesion by the repair enzyme. The results of MD simulation show there is a specific DNA structural configuration formed at the lesion. After 500 ps the DNA is bent in a kink at the TG site. This change dislocates the glycosyl bond at C5' to a position closer to the DNA surface, and thus its atoms are more exposed to the surrounding water shell. The increased number of water molecules that are close to the TG site indicates that the glycosyl bond may be easily contacted by the repair enzyme. In addition, the higher number of water molecules at the TG site substantiates the importance of water-mediated hydrogen bonds created between the repair enzyme and the DNA upon formation of the complex. Copyright 2001 John Wiley & Sons, Inc. J Comput Chem 22: 1723-1731, 2001