Tailoring dispersion properties of photonic crystal waveguides by topology optimization

The paper describes a systematic method for the tailoring of dispersion properties of slab-based photonic crystal waveguides. The method is based on the topology optimization method which consists in repeated finite element frequency domain analyzes, analytical sensitivity analyzes and gradient based design updates. The goal of the optimization process is to come up with slow light, zero group velocity dispersion photonic waveguides or photonic waveguides with tailored dispersion properties for dispersion compensation purposes. Two examples concerning reproduction of a specific dispersion curve and design of a wide bandwidth, constant low group velocity waveguide demonstrate the efficiency of the method.     

Group-velocity dispersion in photonic crystal fibers

The dispersion properties of photonic crystal fibers are calculated by expression of the modal field as a sum of localized orthogonal functions. Even simple designs of these fibers can yield zero dispersion at wavelengths shorter than 1.27 mum when the fibers are single mode, or a large normal dispersion that is suitable for dispersion compensation at 1.55 mum.     

Control of dispersion in photonic crystal fibers

Photonic crystal fibers (PCFs) exploit the large index difference between air and glass to achieve modal properties unattainable by conventional fiber techniques.     

Semianalytical approach to short-wavelength dispersion and modal properties of photonic crystal fibers

Photonic crystal fibers made from arbitrary base materials are considered, and a unified semianalytical approach for the dispersion and modal properties is derived that applies to the short-wavelength regime. In particular, the dispersion and the effective index are calculated and compared with fully vectorial plane-wave simulations, and excellent agreement is found. Asymptotic results for the mode-field diameter and the V parameter are also calculated, and from the latter it is predicted that the fibers are endlessly single mode for a normalized airhole diameter smaller than 0.42, independently of the base material.     

Nearly zero ultraflattened dispersion in photonic crystal fibers

We present a procedure for achieving photonic crystal fibers with nearly zero ultraflattened group-velocity dispersion. Systematic knowledge of the special guiding properties of these fibers permits the achievement of qualitatively novel dispersion curves. Unlike the behavior of conventional fibers, this new type of dispersion behavior permits remarkably improved suppression of third-order dispersion, particularly in the low-dispersion domain.     

光子晶体光纤非线性特性的研究

光子晶体光纤是近年来出现的一种通常由单一介质构成，并由波长量级的空气孔构成微结构包层的新型光纤．文章介绍了光子晶体光纤的制作工艺、工作原理、基本特性、目前的研究重点和进展情况，重点评述了光子晶体光纤非线性特性方面的研究，特别是在超连续光谱的产生、光孤子效应以及频率变换等方面的实验和理论成果以及潜在的应用．     

光子晶体光纤反常色散区抽运产生超连续谱的相干特性分析

使用复互相干度的定义对超连续谱的相干性进行了数值计算,得到了不同功率抽运情况下的脉冲谱展宽以及超连续谱相干性的变化.结果表明孤子自频移以及色散波辐射是抽运波长位于光纤反常色散区情况下超连续谱展宽的主要物理机理,而超连续谱的相干性则主要受到调制不稳定性的影响.调制不稳定性放大抽运脉冲自身携带的随机噪声,使得非线性效应产生的光谱成分具有随机的相位与幅度,引起超连续谱相干性的下降. 抽运功率越高, 调制不稳定性增益越高,噪声对超连续谱产生的作用越强, 超连续谱的相干性越差.要获得高相干的超连续谱, 需采用峰值功率较小的脉冲进行抽运.要获得大谱宽高相干的超连续谱, 则需要合理选择抽运脉冲功率.     

Influence of temperature on dispersion properties of photonic crystal fibers infiltrated with water

Temperature change of the water infiltrated PCF is an interesting and practical method for a dynamical fine tuning of dispersion in active dispersion shift compensating systems. In this paper we present a numerical study on the influence of the temperature of infiltrated water on the dispersion and modal characteristics of photonic crystal fiber. We study regular hexagonal lattice photonic crystal fibers with various geometrical parameters using finite element method.     

Analytical evaluation of chromatic dispersion in photonic crystal fibers

We present a two-dimensional modal approach for the evaluation, in an analytical manner, of chromatic dispersion in any kind of optical fiber. It combines an iterative Fourier technique to compute the propagation constant at any fixed wavelength and an analytical procedure to calculate its derivatives. The proposed formulation takes into account the effective anisotropy of the interfaces and allows us to deal with microstructured fibers, in general, and specifically with realistic photonic crystal fibers (PCFs), including arbitrary spatial refractive-index distributions of dispersive and absorbing materials. This fast and accurate numerical technique is extremely useful for both analysis and design. We show some results of analysis of PCFs with high anisotropy, and we also describe PCFs with new dispersive properties.     

Modified design of photonic crystal fibers with flattened dispersion

We present a modified method to design photonic crystal fibers with flattened dispersion characteristics. By replacing the circular air-holes of the first central ring with elliptic air-holes, we observe a more flattened dispersion curve. Plane-wave expansion (PWE) method is used to analyze the dispersion property in a high-index core PCF. The simulation results are presented, and ultra-low and ultra-flattened dispersion curves over wide wavelength range are demonstrated.     

Photosensitivity-enabled dispersion controllability for quasi-phase-matching in photonic crystal fibers

A novel photonic crystal fiber featured by concentric cores is proposed to induce dispersion controllability by photosensitivity. Chromatic dispersion can be changed from -1827 to 72 ps/nm/km with refractive index modulation of 4 x 10(-4) produced in Ge-doped regions in the fiber. Effective mode area of inner mode is as small as 6.4 mum(2). The proposed fiber enables to achieve quasi-phase-matched nonlinear parametric interaction in a single piece of photonic crystal fiber, by periodically alternating dispersion and compensating for phase mismatching caused by the dispersion.     

八边形光子晶体光纤色散补偿特性分析

利用多极法对八边形光子晶体光纤的色散补偿特性进行数值模拟,分析了结构参数变化对色散补偿特性的影响;计算了具有相同参数的六边形结构光子晶体光纤的色散系数和非线性系数;研究表明八边形光子晶体光纤比六边形结构的光子晶体光纤的大负色散特性明显提高,非色散系数低,更有利于进行色散补偿.因此,本文设计了一种新型的八边形色散补偿光纤,在λ=1.55μm时色散值为-1434.9ps·nm^-1·km^-1,色散斜率为-4.6338ps·nm^-2· 关键词： 光子晶体光纤 多极法 色散斜率 色散补偿     

Design procedure for photonic crystal fibers with ultra-flattened chromatic dispersion

A simple design procedure is used to generate photonic crystal fibers (PCFs) with ultra-flattened chromatic dispersion. Only four parameters are required, which not only considerably saves the computing time, but also distinctly reduces the air-hole quantity. The influence of the air-hole diameters of each ring of hexagonal PCFs (H-PCF, including 1-hole-missing and 7-hole-missing H-PCFs), circular PCFs (C-PCF), square PCFs (S-PCF), and octagonal PCFs (O-PCF) is investigated through simulations. Results show that regardless of the cross section structures of the PCFs, the 1st ring air-hole diameter has the greatest influence on the dispersion curve followed by that of the 2nd ring. The 3rd ring diameter only affects the dispersion curve within longer wavelengths, whereas the 4th and 5th rings have almost no influence on the dispersion curve. The hole-to-hole pitch between rings changes the dispersion curve as a whole. Based on the simulation results, a procedure is proposed to design PCFs with ultra-flattened dispersion. Through the adjustment of air-hole diameters of the inner three rings and hole-to-hole pitch, a flattened dispersion of 0±0.5 ps/(nm·km) within a wavelength range of 1.239 – 2.083 μm for 5-ring 1-hole-missing H-PCF, 1.248 – 1.992 μm for 5-ring C-PCF, 1.237 – 2.21 μm for 5-ring S-PCF, 1.149 – 1.926 μm for 5-ring O-PCF, and 1.294 – 1.663 μm for 7-hole-missing H-PCF is achieved.     

Differential toolbox to shape dispersion behavior in photonic crystal fibers

We present an analytical procedure to compute the first derivatives of the propagation constants with respect to several structural parameters in photonic crystal fibers (PCFs). From them we can easily evaluate the same derivatives of other directly related magnitudes. The above derivatives provide the trend of the magnitude at issue, which allows us to take advantage of a gradient-based algorithm to shape the properties of the guiding structure. In this way we implement an optimization process to carry out real inverse design in PCFs. We focus our attention on designing PCFs with a specific chromatic dispersion behavior. Likewise, the same approach makes it possible to analyze their fabrication tolerances.     

光子晶体光纤色散补偿特性的数值研究

利用矢量有效折射率方法对光子晶体光纤（PCF）的色散补偿特性进行了数值模拟，研究发现通过调节光子晶体光纤包层的空气穴节距或空气穴大小可以灵活地设计光子晶体光纤的色散系数D、色散斜率Dslope以及κ值，可以设计在波长1.55μm附近具有较大绝对值的正常色散和负色散斜率的色散补偿光子晶体光纤，使光通信中的普通单模光纤（G.652）或非零色散位移光纤(G.655)在1.55μm低损耗窗口得到较好的色散补偿.数值模拟和分析表明色散补偿光子晶体光纤的研制具有很大的发展潜力. 关键词： 光子晶体光纤 色散 色散斜率 色散补偿     

Bandgap properties of Kagomé photonic crystal fibers

Photonic crystal fibers (PCFs) can guide light by the photonic bandgap (PBG) effect created by the periodically arranged air holes in the cladding. In this paper, the bandgap properties of Kagomé photonic crystal fibers (KPCFs) are investigated in detail. First, the bandgap properties of PCFs based on the basic Kagomé lattice are analyzed and compared with the PBGs of PCFs based on honeycomb and triangular lattices. We highlight the similarities between KPCFs and honeycomb PCFs in their PBGs, both having air-guiding regions only at very large air filling fractions (AIFs), whereas the PBGs of triangular PCFs can have large air-guiding regions at smaller AIFs due to the difference in the gap structure. In the second half of this paper, we show how the PBGs of KPCFs can be modified by introducing an extra air hole into the vacant space of the original lattice. In particular, KPCFs with medium-sized air holes can be designed to guide air by introducing extra air holes of a larger size. The air-guiding regions of KPCFs with very large air holes can also be greatly extended by the extra air holes. These air-guiding regions occur at higher normalized frequencies, resulting in larger air hole pitches favorable for fabrication. PACS 42.70.Qs; 42.25.Bs; 42.81.Qb     

Calculation of optical properties of hollow-core photonic crystal fibers

We propose a method for calculation of the bandgaps in the cladding of hollow-core photonic crystal fibers, based on the Floquet theorem. The effectiveness of the approach is confirmed by estimates of the effect of the number of air channels in the cladding on attenuation of the fiber modes due to mode energy leakage from the core. We have studied the conditions for the existence of eigenmodes in the indicated fibers. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 76, No. 2, pp. 311–320, March–April, 2009.     

一种晶体光纤基模色散特性的矢量法分析

利用矢量有效折射率方法(矢量法)对光子晶体光纤基模的色散特性进行了数值模拟，并与双正交归一基矢量法以及标量有效折射率方法(标量法)的模拟结果进行了对比.发现所用矢量法的结果与双正交归一基矢量法的结果符合很好，而标量法在低空气填充率f或较高归一化波数A/λ时是一种较好的近似，在空气填充率f较高或归一化波数A/λ较低时，要得到精确的结果必须利用矢量法对光子晶体光纤的特性进行模拟.讨论了光子晶体光纤包层有效折射率与光纤结构的关系. 关键词： 光子晶体光纤 矢量法 有效折射率 色散     

Dispersion compensation properties of dual-concentric core photonic crystal fibers

The dispersion compensation properties of dual-concentric core photonic crystal fibers are theoretically investigated in this letter.The effects of geometric structure on the dispersion properties of dual-concentric core photonic crystal fibers are carefully studied by finite element method.The first layer of holes around the core area is enlarged in a new manner with the near-core point fixed.Considering the tradeoff among several parameters,results show that the dispersion compensation wavelength and strength can be tuned to desired values by constructing an appropriate design of the geometric structure of photonic crystal fibers.     

Optical fiber sensor based on the short-range surface plasmon polariton mode简

The dispersion compensation properties of dual-concentric core photonic crystal fibers are theoretically investigated in this letter. The effects of geometric structure on the dispersion properties of dual-concentric core photonic crystal fibers are carefully studied by finite element method. The first layer of holes around the core area is enlarged in a new manner with the near-core point fixed. Considering the tradeoff among several parameters, results show that the dispersion compensation wavelength and strength can be tuned to desired values by constructing an appropriate design of the geometric structure of photonic crystal fibers.