Flocculation studies of non-aqueous poly(methyl methacrylate) dispersions. II. Stabilization with the diblock copolymer poly (styrene-b-[ethylene-co-propylene])

Well defined non-aqueous dispersions of poly(methyl methacrylate) stabilized by the diblock copolymer poly(styrene-b-[ethylene-co-propylene]) have been studied with a dispersion medium consisting of a binary liquid mixture of n-heptane and n-propanol. Flocculation was induced by adding n-propanol at constant temperature, to find the critical flocculation volume, and by cooling, to find the critical flocculation temperature. Theta conditions for ethylene-propylene copolymer in the same binary liquid mixture were determined using samples obtained by hydrogenating polyisoprene standards. These dispersions just retained stability at theta conditions, with flocculation occurring when the dispersion medium was slightly worse than a theta system for the stabilizing ethylene-propylene chains.     

Analysis of amino acids and proteins using a poly(methyl methacrylate) microfluidic system

Plastic microchips are very promising analytical devices for the high-speed analysis of biological compounds. However, due to its hydrophobicity, their surface strongly interacts with nonpolar analytes or species containing hydrophobic domains, resulting in a significant uncontrolled adsorption on the channel walls. This paper describes the migration of fluorescence-labeled amino acids and proteins using the poly(methyl methacrylate) microchip. A cationic starch derivative significantly decreases the adsorption of analytes on the channel walls. The migration time of the analytes was related to their molecular weight and net charge or pI of the analytes. FITC-BSA migrated within 2 min, and the theoretical plate number of the peak reached 480,000 plates/m. Furthermore, proteins with a wide range of pI values and molecular weights migrated within 1 min using the microchip.     

Studies on the influence of physical aging processes on electret properties of amorphous poly(methyl methacrylate)

The influence of physical aging processes on the electret properties of amorphous poly(methyl methacrylate) was investigated. The experimental method of choice was the thermally stimulated discharge (TSD) technique. The result of these studies is that aging influences the magnitude of the electrical polarization within the glassy state and the thermal stability of the polarization originating from the frozen-in dipole orientation and from trapped charges. The effects of aging on electret properties can, to a good approximation, be accounted for on the basis of the phenomenological aging theory, as proposed by Kovacs et al. More detailed information on the relation between relaxation properties and aging of electret properties can be obtained from an analysis of the experimental results, based on the universal law approach, as proposed by Ngai et al.     

Dielectric analysis of PMMA microcapsules containing an aqueous KCl solution to derive a distribution function of the release rate of KCl

Release of KCl from a batch of PMMA microcapsules containing an aqueous 3 mM KCl solution was studied with the following two methods: 1) dielectric measurements of suspensions of the microcapsules in distilled water. The electrical conductivity of capsule interior was estimated with this method. 2) Measurements of the conductivity of suspending medium of the microcapsule suspensions. These two kinds of experiments provided us with information about the amount of KCl remaining in the capsules and that diffused outside. Results of these experiments showed that the microcapsules varied in their release rate of KCl. A distribution function of the release rates was derived from the results of the dielectric measurements. That distribution function was successful in explaining the results of the measurements of the conductivity of suspending medium. Furrther examination revealed that the release rate increased with the increase in the thickness of capsule wall.     

Compatibilization of blends of polybutadiene and poly(methyl methacrylate) with poly(butadiene-block-methyl methacrylate)

Compatibilization of blends of polybutadiene and poly(methyl methacrylate) with butadiene-methyl methacrylate diblock copolymers has been investigated by transmission electron microscopy. When the diblock copolymers are added to the blends, the size of PB particles decreases and their size distribution gets narrower. In PB/PMMA7.6K blends with P(B-b-MMA)25.2K as a compatibilizer, most of micelles exist in the PMMA phase. However, using P(B-b-MMA)38K as a compatibilizer, the micellar aggregation exists in PB particles besides that existing in the PMMA phase. The core of a micelle in the PMMA phase is about 10 nm. In this article the influences of temperature and homo-PMMA molecular weight on compatibilization were also examined. At a high temperature PB particles in blends tend to agglomerate into bigger particles. When the molecular weight of PMMA is close to that of the corresponding block of the copolymer, the best compatibilization result would be achieved. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36 : 85–93, 1998     

Swelling of poly(methacrylic acid) gels and adsorption of L-lysine and its polymer on the gels

Poly (methacrylic acid) gels (PMAA gels) of various degrees of crosslinking were prepared and the dissociation behavior of these gels was examined; the swelling behavior was investigated as a function of the solution pH values. A reentrant phenomenon of swelling was observed and interpreted based on the Flory-Huggins equation and the Donnan equilibrium formula. Moreover, adsorption of L-lysine, oligo(L-lysine)s (Lys-n,n=3, 9, and 19) and poly(L-lysine) onto PMAA gels from aqueous solutions was investigated under different conditions of pH and concentration of adsorbate. The adsorption ratio of L-lysine onto PMAA gel is dependent on both the pH of solution and the degree of crosslinking. In a pH range between 8 and 9, the protonated form of L-lysine is strongly adsorbed on the PMAA gel by electrostatic interactions. Oligomers and polymer of L-lysine are adsorbed in a somewhat different way from the monomeric L-lysine. In addition, the desorption behavior of L-lysine from PMAA gels by a change in pH was also investigated.     

Structures and thermal properties of chitosan-modified poly(methyl methacrylate)

The emulsion polymerization of methyl methacrylate in the presence of chitosan with potassium persulfate (KPS) as an initiator was examined in a previous article. The free radicals that dissociated from KPS not only initiated the polymerization but also degraded the chitosan molecules. Therefore, in addition to its role as a cationic surfactant, chitosan also participated in the polymerization reaction. When the polymerization was complete, the latex polymer consisted of poly(methyl methacrylate) (PMMA) homopolymer and chitosan–PMMA copolymer. In this article, the structures and thermal properties of latex polymers are examined. Gel permeation chromatography was used to measure the molecular weight of the PMMA homopolymer, with the copolymer composition determined by an elemental analyzer. Scanning and transmission electronic microscopes were used to measure the size of latex particles from different reaction systems. The surface charges of latex particles at several different pH values were determined by the measurement of the ζ potential. All results agreed with the reaction mechanism proposed in the previous article. Finally, the presence of rigid chitosan increased the glass-transition temperature of the final latex polymers. Thermogravimetric analysis showed that the degradation behavior of latex polymers was similar to the unzipping mechanism of PMMA, yet the presence of chitosan units hindered the unzipping of the main chains in chitosan–PMMA copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1646–1655, 2001     

Molecular orientation in hot-drawn poly(ethylene terephthalate) films as determined from the intrinsic polarized fluorescence

The groundstate-stable dimers in the non-crystalline regions of uniaxially drawn poly(ethylene terephthalate) (PET) films were used as chain-intrinsic fluorescent labels for studying the orientation distribution in the non-crystalline regions. As far as indicated by the spectra and the fluorescence decay law, the fluorescent group remains unchanged when the sample is uniaxially oriented by drawing above the glass transition temperature. In contrary to the behaviour of physically incorporated probe molecules, the orientation coefficient f ₂ ^F of the dimers is proportional to the amorphous orientation coefficientf ₂ ^A ; concerning the fluorescence signal, amorphous includes all the material outside the perfect crystal.During deformation, the orientation coefficientf ₂ ^F follows approximately a superposition curve of crystallite-like orientation, separable in the initial range of stretching ratio <2.5, and of true-amorphous orientation of the affine network type that becomes noticably at >3.At temperatures closely aboveT _g, and within the selected range of stretching parameters, the fluorescence intensity of PET remains nearly constant with increasing stretching ratio; at >2.5, where the maximum crystallite orientation is achieved and the increase of amorphous orientation becomes noticably, a slight augmentation of the dimer concentration is observed.     

Synthesis of densely branched poly(methyl methacrylate)s via ATR copolymerization of methyl methacrylate and ethylene glycol dimethacrylate

Densely branched poly(methyl methacrylate)s have been synthesized by copolymerization of methyl methacrylate (MMA) and ethylene glycol dimethacrylate (EGDMA) using atom transfer free radical polymerization (ATRP). By employing the phenyl and benzyl esters of 2-bromo-2-methylpropionic acid as the initiators with 2,2-bipyridyl and Cu(I)Cl it has been possible to use high field ¹H nuclear magnetic resonance spectroscopy to evaluate in some detail the composition and structure of the branched PMMAs obtained. Parallel molar mass size exclusion chromatographic analysis using a multi-angle light scattering detector with a refractive index detector (MALS/SEC) has allowed the branched architecture of the products to be confirmed. Rather remarkably, high yields of branched PMMAs can be obtained without crosslinking using MMA/EGDMA molar feed ratios of up to 5/1 by appropriate adjustment of the molar feed of initiator. In particular by maintaining the EGDMA/initiator molar feed ratio ∼1/1 fully soluble products can be obtained that are densely branched since this feed ratio ensures that on average each living primary chain initiated contains on average only one branching EGDMA segment. As might be expected this controlled free radical process offers better control in the synthesis of branched polymer than the corresponding system we have reported using conventional free radical polymerization, and unlike the latter which requires the use of a chain transfer agent, the ATRP system requires no additional chain regulating component. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2375–2386, 2007     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of poly(methyl methacrylate)‐block‐poly(methylphenylsilane)‐ block‐poly(methyl methacrylate) by atom transfer radical polymerization

ABA block copolymers of methyl methacrylate and methylphenylsilane were synthesized with a methodology based on atom transfer radical polymerization (ATRP). The reaction of samples of α,ω‐dihalopoly(methylphenylsilane) with 2‐hydroxyethyl‐2‐methyl‐2‐bromoproprionate gave suitable macroinitiators for the ATRP of methyl methacrylate. The latter procedure was carried out at 95 °C in a xylene solution with CuBr and 2,2‐bipyridine as the initiating system. The rate of the polymerization was first‐order with respect to monomer conversion. The block copolymers were characterized with ¹H NMR and ¹³C NMR spectroscopy and size exclusion chromatography, and differential scanning calorimetry was used to obtain preliminary evidence of phase separation in the copolymer products. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 30–40, 2003     

Numerical analysis of complex dielectric mixture formulae

As a continuation of our earlier work (Ref. [9]) the complex (frequency dependent) dielectric behaviour of some mixture formulae are studied numerically. These include matrix-inclusion type formulae (as the Wagner-Sillars or the Bruggeman-Boyle equations), mean-field statistical mixture formulae (as the Böttcher-Hsu equation) and symmetrical integral formulae (as the Looyenga equation). The frequency dependent dielectric properties are first calculated for a model system at various particle shapes, field orientations and volume fractions. After this, the validity of these equations is checked on typical sets of experimental data. For low loss powders, the Böttcher and Looyenga equations are suggested; for emulsions, suspensions and filled polymers, the matrix-inclusion type formulae give acceptable results in most cases, while for metal-insulator composites mean-field statistical mixture formulae have to be used, as they are capable of describing the percolation phenomenon.     

Recent development in dielectric relaxation spectroscopy of polymers

An evaluation strategy for dielectric measurements in the frequency and/or time domain is presented which provides complete information about a relaxation mechanism (intensity, position, and shape of the relaxation function) independent of overlapping with neighboring mechanisms. As an example results on poly-(ethyleneterephthalate) are given.     

Analysis on absorption spectra of Nd in poly(methyl methacrylate)

The absorption spectrum of neodymium (III) (Nd³⁺ doped in poly(methyl methacrylate) was measured. The Nephlauxetic effect was found in the spectrum compared to other spectra of Nd³⁺ doped in various matrices. The experimental data used, Slater-Condon parameters (F₂,F₄,F₆) and Lander parameter (ζ_4f) were calculated by the Taylor series expansion based on the assumption that the energy separation between J-levels of the 4fⁿ-configuration is a function of F₂,F₄,F₆ and ζ_4f. The Judd-Ofled intensity parameters (Ω₂,Ω₄,Ω₆) were also calculated. Analysis of the Nephlauxetic effect and the parameters variation on the host matrices was carried out.     

Robust isocratic liquid chromatographic separation of functional poly(methyl methacrylate)

The separation of telechelic poly(methyl methacrylate) (PMMA) prepolymers based on the number of end-groups under critical liquid chromatography (LC) conditions has been studied using a bare-silica column, which can interact with polar functional groups. The critical solvent compositions for non-functional, mono-functional and bi-functional PMMAs were determined in normal-phase LC using mixtures of acetonitrile and dichloromethane (DCM) of varying composition as the mobile phase. The telechelic prepolymers were successfully separated according to hydroxyl (OH) functionality (with zero, one, or two OH groups, respectively) under the critical conditions, in which fast (5 min), base-line separations were obtained independent of molecular weight. Changing the column temperature, flow rate, and mobile-phase composition within a certain range did not affect the functionality separation. Therefore this isocratic LC separation method is quite robust. Evaporative light-scattering detector (ELSD) calibration curves were used for the quantitative analysis of functional PMMA prepolymers.     

Theoretical study of dielectric behavior of microcapsule suspensions with distributed drug release rate

Theoretical consideration is made concerning the dielectric behavior of aqueous suspensions of W/O-type microcapsules containing aqueous electrolyte solutions, especially concerning distribution effects of the electrolyte release rate on the dielectric behavior.It is shown at first that the distribution of the release rate causes electrical conductivity of the capsule interior. Next, it is deduced, in the light of a theory of the interfacial polarization, that the distribution characteristics of the capsule interior's electrical conductivity are closely related to those of the relaxation time for a dielectric relaxation exhibited by the suspensions. Several formulas are derived to describe the relation between the distribution characteristics of the release rate and those of the relaxation time.     

Polyepichlorohydrin polyurethane/poly(methyl methacrylate) interpenetrating polymer networks

Polyurethane (PU) based on polyepichlorohydrin/poly(methyl methacrylate) (PECH/PMMA) interpenetrating polymer networks (IPNs) was synthesized by a simultaneous method. The effects of composition, hydroxyl group number of PECH, NCO/OH ratio and crosslinking agent content in IPNs were investigated in detail. Some other glycols, such as poly(ethylene glycol), poly(propylene glycol) and hydroxyl-terminated polybutadiene, were also used to obtain PU/PMMA IPNs. The interpenetrating and fracture behaviors of the IPNs are explained briefly.     

Conformational change of poly(L-lysine) and poly(L-ornithine) and cooperative binding of sodium alkanesulfonate surfactants with different chain length

Conformations of poly(L-lysine) (PLL) and poly(L-ornithine) (PLO) were examined in aqueous solutions of sodium alkanesulfontates (C_nSO₃Na, n=9, 10, 11, 12) in the presence of 0.02 M NaCl by circular dichroism (CD) spectroscopy. These surfactants induce the-structure for PLL and the-helix for PLO. The binding of surfactants on the polypeptides was measured potentiometrically with a surfactant ion electrode and was found to be highly cooperative. The cooperativity increases with increasing chain length of surfactant. The behavior accompanying the surfactant binding and the conformational change indicated that the conformational change requires a certain amount of bound surfactants in the case of C₉SO₃Na and starts immediately on binding of surfactant in the case of C_{1 2}SO₃Na. The clustering of bound surfactants due to the cooperative binding as well as neutralization of polypeptides contributes to their conformational change. A slow conformational change of PLO was found in the time scale of hours, sometimes days, for C₉- and C₁₀SO₃Na at low concentrations, but the binding process reached the equilibrium quickly. This slow mode might occur due to the slow interaction between surfactant/polypeptide complexes.     

Preparation of poly(methyl methacrylate) microcapsules by in situ polymerization on the surface of calcium carbonate particles

Poly(methyl methacrylate) (PMMA) microcapsules were prepared by the in situ polymerization of methyl methacrylate (MMA) and N,N′-methylenebisacrylamide on the surface of calcium carbonate (CaCO₃) particles, followed by the dissolution of the CaCO₃ core in ethylenediaminetetraacetic acid solution. The microcapsules were characterized using fluorescence microscopy, atomic force microscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. The average sizes of the CaCO₃ particles and PMMA capsules were 3.8 ± 0.6 and 4.0 ± 0.6 μm, respectively. A copolymer consisting of MMA and rhodamine B-bearing MMA was also used to prepare microcapsules for fluorescent microscopy observations. Fluorescein isothiocyanate-labeled bovine serum albumin was enclosed in the PMMA microcapsules and its release properties were studied.