芳香族小分子物质在表面活性剂溶液中的状态

阴、阳离子表面活性剂在水溶液中混合后很容易形成沉淀,因而以往在应用上将这两种表面活性剂视为配伍禁忌。但是最近几年,混合阴、阳离子表面活性剂水溶液理论性质的研究受到了一种程度的重视。研究发现,该混合体系具有与单纯的离子型表面活性剂或离子与非离子型表面活性剂混合物十分不同的性质,     

高分子与表面活性剂在水相中的相互作用

按照组分荷电属性的不同,高分子/表面活性剂体系可大致划分为三种:中性高分子/离子表面活性剂体系、带电高分子/离子表面活性剂体系、高分子/非离子表面活性剂体系。本文对这三种体系在水相中的高分子/表面活性剂相互作用研究进行综述。在大多数情况下,水相中高分子与表面活性剂共存时都能发生相互作用并形成复合物,其驱动力主要包括疏水作用、静电作用和氢键作用。根据高分子与表面活性剂的荷电情况及结构性质(如疏水链长度)的不同,上述驱动力可以单独或组合作用。此外,温度、pH值、电解质等外界因素对复合物形成过程及结构也具有不同程度的影响。     

阴/阳离子表面活性剂复配体系的中相微乳液研究

阴离子表面活性剂双-2-乙基己基磺化琥珀酸钠(简称AOT), 和阳离子表面活性剂十六烷基三甲基溴代铵(简称CTAB), 在有醇、正辛烷、盐水存在的情况下,能形成多相微乳液。本文系统地研究了阴/阳离子表面活性剂配比、醇的种类、醇的浓度对该体系的中相微乳液的形成及特性的影响, 得到了中相微乳液的特性参数(最佳含盐量S^*, 最佳中相微乳液体积V^*, 界面张力r~E、盐宽△S等)。这些性质对与阴/阳离子表面活性剂复配体系, 三次采油及日用化工上的应用开发具有重要意义。最后还开展单独阴离子表面活性剂体系和阴/阳离子表面活性剂复配体系进行了比较, 得到一些有价值规律, 并从理论上进行了探讨。     

树枝状大分子与表面活性剂相互作用的研究进展

聚酰胺-胺(PAMAM)是目前最具应用前景的树枝状大分子(Dendrimer),它与表面活性剂相互作用后能够形成聚集体,这种聚集体能有效地改变体系的微观环境和物理化学性质。本文综述了小分子表面活性剂与Dendrimer相互作用研究方面所取得的进展,重点讨论了阴离子表面活性剂和阳离子表面活性剂与Dendrimer混合体系中溶液的疏水环境、浊度以及形成的聚集体的中值粒径等物理化学性质的变化,在此基础上,讨论了Dendrimer与小分子表面活性剂相互作用机理研究所取得的进展,为进一步扩大Dendrimer的应用领域提供参考。     

正、负离子表面活性剂凝胶化正丁醇

利用正、负离子表面活性剂混合体系月桂酸钠/十六烷基三甲基溴化铵(SL/CTAB)成功实现了正丁醇的凝胶化, 并借助流变仪、扫描电子显微镜(SEM)研究了该凝胶的流变性质和微观形貌. 实验发现, 正、负离子表面活性剂的浓度及混合比例对正丁醇凝胶的形成具有较大影响, 只有在合适的浓度和混合比例下正丁醇才能被有效地凝胶化. 在正丁醇能够形成凝胶的前提下, 固定正、负离子表面活性剂混合体系中某一组分的浓度, 体系的粘度随着另一组分浓度的增加而增大. 流变结果表明该凝胶具有剪切变稀的非牛顿流体特性. 微观形貌的研究表明所形成的凝胶具有典型的三维网络结构, 厚度相对均一的带状纤维是组成网络的结构单元. 进一步的研究表明, 正、负离子表面活性剂碳氢链的疏溶剂作用、极性头基间的静电吸引作用、表面活性剂与正丁醇分子间的氢键作用对凝胶的形成起到重要的作用.     

咪唑类离子液体的研究进展

咪唑类离子液体以其独特的物理化学性质和在众多领域的巨大应用潜能而引起广泛的关注.本文结合我们的研究工作,对近期国际上关于咪唑类离子液体的气-液和液-液平衡、咪唑类离子液体的表面活性剂行为、传统表面活性剂在咪唑类离子液体中聚集体的形成、表面活性剂/水(油)/咪唑类离子液体三元体系超分子自组装体形成等方面的一些主要研究成果进行了综合评述.在此基础上,提出了进一步开展非传统表面活性剂/离子液体体系超分子自组装体及离子液体结构对聚集体形成、结构、性质影响等研究的设想.     

Dendrimer与表面活性剂相互作用的研究进展

聚酰胺-胺(PAMAM)是目前最具应用前景的树枝状大分子(Dendrimer),它与表面活性剂相互作用后能够形成聚集体,这种聚集体能有效地改变体系的微观环境和物理化学性质。本文综述了小分子表面活性剂与Dendrimer相互作用研究方面所取得的进展,重点讨论了阴离子表面活性剂和阳离子表面活性剂与Dendrimer混合体系中溶液的疏水环境、浊度以及形成聚集体中值粒径等物理化学性质的变化,在此基础上,讨论了Dendrimer与小分子表面活性剂相互作用在机理方面所取得的研究进展,为进一步扩大Dendrimer的应用领域提供参考。     

扩张流变法研究表面活性剂在界面上的聚集行为

近年发展起来的界面流变测定技术在研究界面性质方面具有许多独特之处.本文结合我们的工作,总结了近年来有关该技术在表面活性剂界面聚集行为研究中的应用,讨论了扩张频率、表面活性剂浓度及疏水链长、无机盐和温度对表面扩张流变行为的影响,同时探讨了小分子表面活性剂与高分子表面活性剂表面扩张流变行为的区别以及小分子表面活性剂在气/液界面与液/液表面的扩张流变性的差异.大量研究表明,借助于界面流变性的测定不仅可以研究发生在界面上和界面附近的微观弛豫过程,而且可以探讨界面上超分子聚集体的形成,进而为乳状液和泡沫等分散体系的稳定性提供依据.     

表面活性剂对分散体系粘度影响的特殊性

通过液体石蜡的水基化分散对影响分散体系粘度的粒子大小、表面活性剂胶束和界面膜等因素进行了研究.结果表明,表面活性剂胶束对分散体系粘度的影响极为有限,而在分散相粒子界面上由表面活性剂分子所形成的界面膜是导致分散体系粘度产生变化的重要因素.实验数据表明,对于分散体系的稳定性,存在一个表面活性剂浓度变化的临界值,而该临界值所对应的是表面活性剂分子在粒子表面以最紧密和规整的方式形成的界面膜,该种界面膜使分散体系粘度达到最大值,从而最大限度地保证了分散体系的稳定性.     

抗衡离子对硫酸盐表面活性剂气/液界面性质影响的分子动力学模拟

采用全原子分子动力学方法研究了抗衡离子为第一主族离子(Li⁺、Na⁺、K⁺、Rb⁺和Cs⁺)的十二烷基硫酸盐表面活性剂的气/液界面性质. 通过分析体系中各组分的密度分布曲线, 考察表面活性剂单分子层在界面的聚集形态, 并利用径向分布函数分析了表面活性剂极性头基与抗衡离子间的相互作用. 研究结果表明: 随着抗衡离子半径的增大, 不同体系的界面水层厚度依次增加, 表面活性剂极性头基与抗衡离子形成的Stern和扩散层厚度也相应增加. 但表面活性剂吸附层的抗衡离子缔合度以及体系表面张力却随抗衡离子半径的增大而减小. 研究表明抗衡离子的差异对十二烷基硫酸盐表面活性剂气/液界面性质有很大影响.     

正、负离子混合表面活性剂双水相系统相图及微观 结构研究

研究了水/十二烷基硫酸钠(SDS)/十六烷基三甲基溴化胺(CTAB)三元相图上的双水相区及其相关性质,研究发现：该系统在两个非常狭窄的区域能够形成双水相,SDS过量的双水相区具有类似浊点的性质,上相有明显的偏光现象,而CTAB过量的双水相区则具有Krafft点性质,上相偏光现象较弱。冷冻蚀刻显微镜观察双水相的微观结构表明,上相为层状结构,下相一般为球状结构。双水相的体积比对正、负离子表面活性剂比例的微小变化非常敏感。     

Effect of salts on synthesis of mesoporous materials with mixed cationic and anionic surfactants as templates

Mesoporous silica materials were synthesized using tetraеthoxysilane as precursor and liquid crystals formed in aqueous mixtures of cetyl trimethyl ammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) as templates, without and with the addition of NaBr or Na₂SO₄. For this purpose, the formation of liquid crystals as a function of the ratio of CTAB and SDS under different conditions was studied. It was found that liquid crystals formed in the mixed system of CTAB and SDS at certain mixing ratios are well-structured templates for the synthesis of mesoporous silicas. The synthesized silica materials were characterized by transmission electron microscope and nitrogen adsorption/desorption analysis. The pore size of mesoporous silicas could be controlled between 3 to 6 nm by simply changing the concentration of NaBr in solution. The mesoporous silicas exhibited lamellar structure and the order of structural arrangement was promoted with addition of NaBr. However, addition of Na₂SO₄ led to ink-bottle type pores of mesoporous silica with a narrow pore size distribution of around 2 nm and a higher specific surface area of 610 m² g^–1.     

The significant effects of linear medium chain fatty alcohols on phase behavior of aqueous solution of mixed cationic–anionic surfactant

The effect of 1-hexanol on the phase behavior of aqueous solutions of sodium dodecyl sulfate (SDS) and cetyl trimethyl ammonium bromide (CTAB) has been systematically studied. The phase ranges of vesicle and liquid crystal (LC) can be greatly extended with the addition of 1-hexanol. These specific structures distributed symmetrically on the two sides of the SDS/CTAB equimolar line in the pseudo ternary phase diagram. The aqueous two phase system (ATPS) contained vesicles that would transform into lamellar LC with the change of ratio of SDS/CTAB. The phase behaviors of SDS/CTAB system with addition of different alcohols (C₅OH–C₈OH) showed similar trends in structural transition except for phase span, demonstrating that the obstruction of electrostatic interaction between surfactant polar heads was affected by the insertion depth of the added alcohols.     

Synthesis of lamellar mesoporous silica materials using LCs as templates

The study focuses on the synthesis of mesoporous silica materials using liquid crystals (LCs) formed in an aqueous mixture of cationic cetyltrimethylammonium bromide (CTAB) and anionic sodium dodecyl sulfate (SDS) as templates and tetrathoxysilane (TEOS) as precursor. For this purpose, the phase behavior and range of LC areas were determined at different temperatures, concentrations, and ratios of CTAB/SDS. It was found that LCs became denser with the increased of concentration of surfactants. The mesoporous materials were synthesized using LCs as templates at various temperatures, surfactant concentrations, and pH values. The mesoporous samples were characterized using SEM and nitrogen sorption analysis. The research results showed that the structure of synthesized samples were lamellar and their surface areas increased significantly with the increase of temperature in the temperature range of LCs, reaching about 900?m²/g at 60°C. The surfactant concentrations affect the thickness of pore wall and thereby the specific surface area of products. The specific surface area and the order of mesoporous sample increased gradually with the decrease of pH.     

Spectral and electrochemical studies of bis(diimine)copper(II) complexes in anionic, cationic and nonionic micelles

The spectral and redox behavior of bis(diimine)copper(II) complexes, where diimine is bipyridine, 1,10-phenanthroline, 4-methyl-1,10-phenanthroline, 5-methyl-1,10-phenanthroline, 5-nitro-1,10-phenanthroline, 4,7-dimethyl-1,10-phenanthroline, 5,6-dimethyl-1,10-phenanthroline, 2,9-dimethyl-1,10-phenanthroline, 3,4,7,8-tetramethyl-1,10-phenanthroline and dipyrido-[3,2-d:2',3'-f]-quinoxaline, are significantly different in aqueous and in aqueous SDS, CTAB and Triton X-100 micellar solutions. The (1)H NMR spectral study in aqueous (D(2)O) and aqueous micelles reveals that the Cu(II) complexes interact more strongly with SDS than with CTAB and Triton X-100 micelles and at sites on SDS micelles different from those on the latter. Ligand Field spectral studies reveal that the complexes exist as the dicationic aquated species [Cu(diimine)(2)(H(2)O)(2)](2+), which interacts strongly with the anionic SDS micelles through columbic forces. However, they exist as [Cu(diimine)(2)(H(2)O)Cl](+) and/or [Cu(diimine)(2)H(2)] located in the hydrophobic microenvironments in Triton X-100 and CTAB micelles. The attainment of reversibility of the redox systems in the micellar microenvironments is remarkable and this illustrates that the Cu(II) and Cu(I) species undergo stereochemical changes suitable for reversible electron-transfer. The remarkable differences in spectral and electrochemical properties of Cu(II) complexes in aqueous and aqueous micellar solutions illustrate that the complexes are nestled largely within the micellar environments and imply that the accessibilities of the complexes to electron-transfer are different and are dependent on the nature of micelles as well as the nature and hydrophobicity of the diimine ligands.     

Characterization of surfactant and phospholipid vesicles for use as pseudostationary phases in electrokinetic chromatography

The physical, electrophoretic and chromatographic properties (mean diameter, electroosmotic flow, electrophoretic mobility, elution range, efficiency, retention, and hydrophobic, shape, and chemical selectivity) of three surfactant vesicles and one phospholipid vesicle were investigated and compared to a conventional micellar pseudostationary phase comprised of sodium dodecyl sulfate (SDS). Chemical selectivity (solute-pseudostationary phase interactions) was discussed from the perspective of linear solvation energy relationship (LSER) analysis. Two of the surfactant vesicles were formulated from nonstoichiometric aqueous mixtures of oppositely charged, single-tailed surfactants, either cetyltrimethylammonium bromide (CTAB) and sodium octyl sulfate (SOS) in a 3:7 mole ratio or octyltrimethylammonium bromide (OTAB) and SDS in a 7:3 mole ratio. The remaining surfactant vesicle was comprised solely of bis(2-ethylhexyl)sodium sulfosuccinate (AOT) in 10% v/v methanol, and the phospholipid vesicle consisted of 1-palmitoyl-2-oleyl-sn-glycero-3-phosphocholine (POPC) and phosphatidyl serine (PS) in 8:2 mole ratio. The mean diameters of the vesicles were 76.3 nm (AOT), 86.9 nm (CTAB/SOS), 90.1 nm (OTAB/SDS), and 108 nm (POPC/PS). Whereas the coefficient of electroosmotic flow (10(-4) cm2 V(-1) s(-1)) varied considerably (1.72 (OTAB/SDS), 3.77 (CTAB/SOS), 4.05 (AOT), 5.26 (POPC/PS), 5.31 (SDS)), the electrophoretic mobility was fairly consistent (-3.33 to -3.87 x 10(-4) cm2 V(-1) s(-1)), except for the OTAB/SDS vesicles (-1.68). This resulted in elution ranges that were slightly to significantly larger than that observed for SDS (3.12): 3.85 (POPC/PS), 8.6 (CTAB/SOS), 10.1 (AOT), 15.2 (OTAB/SDS). Significant differences were also noted in the efficiency (using propiophenone) and hydrophobic selectivity; the plate counts were lower with the OTAB/SDS and POPC/PS vesicles than the other pseudostationary phases (< or = 75,000/m vs. > 105,000/m), and the methylene selectivity was considerably higher with the CTAB/SOS and OTAB/SDS vesicles compared to the others (ca. 3.10 vs. < or = 2.6). In terms of shape selectivity, only the CTAB/SOS vesicles were able to separate all three positional isomers of nitrotoluene with near-baseline resolution. Finally, through LSER analysis, it was determined that the cohesiveness and hydrogen bond acidity of these pseudostationary phases have the greatest effect on solute retention and selectivity.     

盐对正负离子表面活性剂双水相性质的影响

主要研究了盐对SDS/CTAB/H₂O混合系统双水相相行为的影响, 并对双水相上相的液晶性质进行了初步的探索. 结果表明: 盐能促使阴离子双水相区和阳离子双水相区分别向SDS和CTAB方向移动, 并使双水相区加宽. 反离子扩散双电层中盐的离子半径越大, 其对ATPS区的位置及相区宽度的影响程度越大. 盐的浓度达到一定值时, 它对双水相的影响可以达到饱和状态. ATPS_a区的饱和盐浓度值大于ATPS_c区的饱和盐浓度值. 异号盐离子对反离子层的限制作用与其离子半径有关.     

新型疏水缔合聚合物P(AM/POEA)与表面活性剂的相互作用

采用粘度法、荧光探针和透射电镜研究了新型疏水缔合聚合物P(AM/POEA)和表面活性剂SDS和CTAB在水溶液中的相互作用. 聚合物P(AM/POEA)结构中, 疏水体(2-苯氧乙基丙烯酸酯)呈嵌段状无序地分布在聚丙烯酰胺主链上. 这类聚合物很容易和表面活性剂相互作用, 通过疏水缔合, 形成混合胶束状聚集体, 导致溶液粘度剧增. 随聚合物溶液中SDS的加入, 溶液粘度发生大幅度起伏变化, 出现最大值. 粘度最大值对应的表面活性剂浓度c_S,max位于表面活性剂CMC附近, 并发现它的位置不随聚合物微结构而变化. 然而它们缔合作用的增粘程度却与聚合物疏水体含量X_H及疏水嵌段尺寸N_H有关. 在实验浓度范围内, X_H和N_H愈大, 溶液的粘度越高. 此外用透射电镜直接观察到聚合物/表面活性剂体系中聚集体的交联结构形貌.     

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

添加剂对双子表面活性剂DYNOL－604浊点的影响

对双子表面活性剂DYNOL－604的浊点开展研究,考察了添加剂对其浊点的影响 。离子表面活性剂的加入,使其浊点升高,而加入醇时出现了一种双浊点的现象, 我们称之为“下限浊点”和“上限浊点”。即温度低于“下限浊点”和高于“上限 浊点”,体系由浑浊变为澄清。采用NMR手段测定“上限浊点”以上温度体系的自 扩散系数,证明为双连续微乳液结构,并从R比值理论进行分析。