THE PREPARATION OF CROSSLINKED N，O—CARBOXYMETHYL CHITOSAN RESINS AND THEIR ADSORPTION PROPERTIES FOR TRIGLYCERIDE IN SERUM

Crosslinked N,O-carboxymethyl chitosan resins which can selectively adsorb triglyceride,were prepared by the reaction of N,O-carboxymethyl chitosan with glutaraldehyde solution.Adsorption experiments were performed by adding the resins to the serum.The results showed that this type of adsoirbent could cut down the concentration of triglyceride in serum by 56.4%(3.35mg/g resin)at most,while concentration of the total protein(TP) decreased only by 10.9% at least,so this novel adsorbent can be used to cure hypertriglyceridemia by hemoperfusion in the future.     

一种新型甘油三酯吸附剂的制备及其对血清中甘油三酯的吸附性能研究

合成了一种新型的甘油三酯吸附剂-磺化羟乙基化交联壳聚糖，用其对血浆中甘油三酯进行吸附．实验结果表明，该吸附剂最高可使血清中的甘油三酯降低76．9％（每克树脂吸附量为6．25mg），而对血清中总蛋白（TP）的吸附较少．     

磺化羟乙基化交联壳聚糖对血清中低密度脂蛋白的吸附性能研究

磺化羟乙基化，交联壳聚糖，低密度脂蛋白，高密度脂蛋白，总蛋白，高脂蛋白血症     

Surface and biological activity of sophorolipid molecules produced by Wickerhamiella domercqiae var. sophorolipid CGMCC 1576

The ion-imprinted magnetic chitosan resins (IMCR) prepared using U(VI) as a template and glutaraldehyde as a cross-linker showed higher adsorption capacity and selectivity for the U(VI) ions compared with the non-imprinted magnetic chitosan resins (NIMCR) without a template. The results showed that the adsorption of U(VI) on the magnetic chitosan resins was affected by the initial pH value, the initial U(VI) concentration, as well as the temperature. Both kinetics and thermodynamic parameters of the adsorption process were estimated. These data indicated an exothermic spontaneous adsorption process that kinetically followed the second-order adsorption process. Equilibrium experiments were fitted in Langmuir, Freundlich, and Dubinin-Radushkevich adsorption isotherm models to show very good fits with the Langmuir isotherm equation for the monolayer adsorption process. The monolayer adsorption capacity values of 187.26 mg/g for IMCR and 160.77 mg/g for NIMCR were very close to the maximum capacity values obtained at pH 5.0, temperature 298 K, adsorbent dose 50 mg, and contact time 3 h. The selectivity coefficient of uranyl ions and other metal ions on IMCR indicated an overall preference for uranyl ions. Furthermore, the IMCR could be regenerated through the desorption of the U(VI) ions using 0.5 M HNO(3) solution and could be reused to adsorb again.     

浮石负载壳聚糖吸附去除水中丙溴磷

通过浮石负载壳聚糖制备了吸附剂壳聚糖/浮石复合物,采用扫描电子显微镜(SEM)、热重分析(TGA)、元素分析、傅里叶红外光谱(FT-IR)、X射线衍射(XRD)和X射线荧光光谱(XRF)等技术手段表征了吸附剂性质,考察了吸附剂量、吸附时间、溶液pH值、离子强度和温度对该吸附剂吸附去除水中丙溴磷的影响,研究了再生吸附剂的吸附性能。结果表明,负载在浮石上的壳聚糖占吸附剂总量的8.69%;在p H值3.0~7.0内,壳聚糖/浮石对丙溴磷的吸附率大于90%;这种吸附剂对丙溴磷的吸附受溶液离子强度影响较小,随温度升高而稍微减小。在溶液温度25℃、pH=7.0、丙溴磷浓度40 mg/L、壳聚糖/浮石剂量为0.7 g/L和吸附平衡时间为90 min条件下,此吸附剂对丙溴磷最大吸附率为93.3%(最大吸附量为53.4 mg/g)。壳聚糖/浮石连续经过3次吸附/再生循环,每次循环对丙溴磷的吸附率下降约12%。可见壳聚糖/浮石通过吸附可有效地去除水中的农药丙溴磷。     

Synthesis and Properties of Surface Molecular Imprinting Adsorbent for Removal of Pb<Superscript>2+</Superscript>

A new chitosan imprinting adsorbent using diatomite as core material was prepared by using the surface molecular imprinting technology with the Pb²⁺ as imprinted ion. The preparation process conditions of the surface molecular imprinting adsorbent were studied. The adsorbent was characterized by using Fourier transform infrared (FTIR) spectrum. FTIR spectrum indicated that it was cross-linked by epichlorohydrin. The new imprinting adsorbent could provide a higher adsorption capacity for Pb²⁺, which reached 139.6 mg/g increasing 32.3% compared with cross-linking chitosan adsorbent (the initial Pb²⁺ concentration of 600 mg/L). The adsorption velocity was quick and the equilibration time of the imprinting adsorbent for Pb²⁺ was 3 h that shortened about 40% compared with cross-linking chitosan adsorbent. It had a more wide pH range of 5–7 than that of cross-linking chitosan adsorbent. The new imprinting adsorbent can be reused for up to ten cycles without loss of adsorption capacity. In the kinetics and isotherm study, the pseudosecond order model and Langmuir model could represent the adsorption process.     

高比表面季铵基树脂的结构调控及在三七叶总皂甙纯化中的应用研究

利用Davankov后交联反应,合成了一类兼具高比表面积和高功能基含量的季铵基(—N+(CH)3)吸附树脂,考察了树脂比表面积和功能基含量的调控规律,并将其用于三七叶总皂甙的进一步纯化.结果表明,当树脂比表面积为692m2/g,交换量为2.1mmol/g时,树脂具有最佳的纯化效果,只通过吸附—解吸一步工艺,产品纯度即可从32.0%提高到90%以上,皂甙的回收率高于95%.最后,初步探讨了树脂对皂甙和色素的吸附机理,认为树脂对皂甙的吸附是单纯的疏水性作用力,而对色素的吸附应为疏水-离子交换双重作用的协同效应.     

环氧活化法制备免疫吸附剂及其对乙型肝炎表面抗原的吸附

分子采用环氧氯丙烷和1,4－二羟基正丁烷双缩水甘油醚活化交联壳聚糖树脂,经偶联抗－乙型肝炎表面抗原（HBsAg)单克隆抗体,制备树脂／抗体免疫吸附剂。含HBsAg的患者阳性血清的吸附实验结果表明,对HBsAg的吸附率可达44％,能使阳性血清转为阴性,通过对不同活化试剂制备的免疫吸附剂的活化过程和吸附性能的研究发现,活化试剂中的“手臂”结构有利于保持偶联抗的天然构象,使之具有较高的活性。     

Macroporous chitosan layer coated on non-porous silica gel as a support for metal chelate affinity chromatographic adsorbent

A new immobilized metal affinity chromatography (IMAC) matrix was prepared by coordinating Cu2+ with cross-linked chitosan coated on non-porous silica gel (Cu-CTS-SiO2). Macroporous structure could be formed on the coated layer by imprinting polyethylene glycol (PEG) in chitosan film. The surface morphology changes on Cu-CTS-SiO2 bead prepared in different condition were confirmed by scanning electron microscopy (SEM). Effects of chitosan and PEG content in coating solution, the molecular mass of PEG on the surface macropore formation and adsorption capacity of bovine serum albumin (BSA) were investigated. Results indicated that coating solution with 2% chitosan and 10% PEG 20000 was optimal. Batch experiments were also conducted for elucidating the optimal pH, the adsorption isotherm and adsorption kinetics of BSA. Adsorption isotherm of trypsin on the same adsorbent was also performed. Results showed that the support itself had low non-specific interaction with both BSA and trypsin. The maximum adsorption capacity for BSA and trypsin on the prepared IMAC adsorbent could reach 192 mg and 5000 IU, respectively calculated by every gram of chitosan. The binding and eluting condition for BSA were tested on column filled with the adsorbent. Crude BSA sample could be purified on the IMAC column.     

胆红素—白蛋白复合物的化学平衡离解常数及结合自由能的测定

胆红素与血清白蛋白结合能形成一种水溶性的复合物［‘，’j，清除血液中过量的胆红素是人工肝辅助装置研究的热门课题［‘1．血液灌流所用材料必须具备与白蛋白竞争吸附胆红素的能力．而关于胆红素与白蛋白结合的平衡常数的测定尚未见报道．本文利用在不同白蛋白浓度和不同胆红素浓度的溶液中，CHP树脂对胆红素的吸附数据，求得胆红素一白蛋白复合物的化学平衡离解常数及结合自由能，方法简便易行．1实验部分1．1试剂及仪器壳聚糖（南开大学高分子所自制）；戊二醛（天津津宁精细化工厂），巳R．级；Span80（天津化学试剂三厂），C．P；…     

含氨基聚甲基丙烯酸羟乙酯树脂对胆红素的吸附性能研究

以交联聚甲基丙烯酸羟乙酯树脂为载体,以己二胺和多乙烯多胺为功能基制备了一系列胆红素吸附剂,研究了它们在不同吸附温度、离子强度和胆红素浓度等条件下,对胆红素的吸附性能的影响.研究表明,该类吸附剂对胆红素具有良好的吸附性能,其中以己二胺和质子化己二胺为功能基的吸附剂对胆红素的吸附作用最佳.     

Adsorption behavior of uranium(VI) and other ionic species on cross-linked chitosan resins modified with chelating moieties

Cross-linked chitosan resins with catechol (catechol-type chitosan, type 1 and type 2), iminodiacetic acid (IDA-type chitosan), iminodimetylphosphonic acid (IDP-type chitosan), phenylarsonic acid (phenylarsonic acid-type chitosan), or serine (serine-type chitosan) were prepared for the collection and concentration of uranium(VI). The adsorption behavior of U(VI) and other ionic species, such as metal ions and oxo-acid ions, on the cross-linked chitosan (base material) and chitosan resins modified with chelating moieties was examined using a column procedure. Especially, the catechol-type chitosan (type 2) adsorbed U(VI) at pH 2-7, and selectively collected U(VI) at acidic pH regions by forming a stable chelate with hydroxyl groups of catechol moiety introduced to the chitosan. Also, the adsorption properties of cationic and anionic species present in aquatic media were elucidated. The adsorption ability for U(VI) was in the order: catechol-type chitosan (type 2) > serine-type chitosan > phenylarsonic acid-type chitosan > the others. The catechol-type chitosan (type 2) was useful for the collection and concentration of uranium(VI).     

Development of column-pretreatment chelating resins for matrix elimination/multi-element determination by inductively coupled plasma-mass spectrometry

Chelating resins, two kinds of iminodiacetate derivatives (IDA) of cross-linked chitosan (CCS) were synthesized and investigated for adsorption capacity, matrix elimination and collection/concentration of analytes by a column pretreatment in a multi-element ICP-MS determination method. The adsorption behavior of 54 elements at the 10 ng ml(-1) level on chitosan derivatives in a packed mini-column was systematically examined. Almost 30 kinds of metal ions were recovered quantitatively at pH 5 with CCS-HP/IDA (cross-linked chitosan possessing N-2-hydroxypropyl iminodiacetic acid groups) column. Compared with available chitosan-iminodiacetate resin, CHITOPEARL CI-03, the recovery of the metal ions such as Cu, Pb and La is satisfactory with CCS-IDA (cross-linked chitosan possessing N,N-iminodiacetic acid groups) and CCS-HP/IDA using 2 M nitric acid as an eluent, which may be attributed to the difference of cross-linking and macroporous structure. Compared with Chelex-100, the adsorption efficiency is in the order: Chelex-100 > CCS-IDA > CCS-HP/IDA, especially in the chelating ability for alkaline earth metals. The resin with a longer spacer (CCS-HP/IDA) showed higher adsorption selectivity between heavy metal ions and alkaline earth metals at pH < 7. The separation efficiency of the major matrix cations in seawater (Na. K, Mg, Ca) has also been investigated, and matrix interference was negligible even in a seawater sample at pH 5 with CCS-HP/IDA. The recoveries of Mn at pH 5 with CCS-HP/IDA or Chelex-100 were almost 100%. However, those of Mg with each resin were 4 or 98%, respectively. The adsorption capacities of synthesized CCS-HP/IDA for Cu(II), Pb(II) and La(III) were 0.90, 0.65 and 0.34 mmol g(-1), respectively. Therefore, the chelating chitosan resins developed are applicable to the pretreatment of trace amounts of elements in various kinds of water samples.     

螯合树脂研究——ⅩⅥ.以壳聚糖为母体的含硫、氮螯合树脂的合成及其吸附性能

壳聚糖与环硫氯丙烷反应合成了一系列含S和N的交联型螫合树脂。这类树脂对贵金属离子如:金、银、钯、铂等具有优良的吸附性能。     

Biosorbent for tungsten species removal from water: effects of co-occurring inorganic species

The effect of co-occurring inorganic species on the removal of tungsten from water was investigated using biosorbent (i.e., chitosan coated montmorillonite clay). Simulated natural water and well water from Fallon, NV were used for this study. The concentrations of tungsten (21-541 mg/L) and inorganic species ([H(2)CO(3)]=0-4.2 mg/L, [H(4)SiO(4)]=0-90 mg/L, and [SO(2-)(4)]=0-400 mg/L) in simulated feed water were varied. The concentration of tungsten in the well water was 26 microg/L. The pH level of simulated feed water and well water was adjusted to 4 since this pH was found to be the most effective pH for the tungsten removal using chitosan coated clay. Tungsten removal without the existence of co-occurring inorganic species decreases from 99.8 to 87.1% with an increase in initial tungsten concentration from 21 to 541 mg/L. It reduces further as the co-occurring inorganic species concentration increases. The percentage of the tungsten removal ranges between 68.2-93.8%, 66.7-94.2%, and 53.6-93.7% for simulated natural water containing varied amount of H(2)CO(3), H(4)SiO(4), and SO(2-)(4), respectively. The adsorption kinetic data could be best described by the pseudo second order expression. The adsorption equilibrium data was modeled with the Langmuir, Temkin, and Freundlich equations and was found to be represented well by the Langmuir equation. The essential characteristics of the Langmuir isotherm indicate that the adsorption of tungsten on chitosan coated clay is favorable regardless of the presence of interfering species. Compared to natural clay, chitosan coated clay has about 116 times larger adsorption capacity per gram of chitosan, which makes it a superior adsorbent. However, the maximum tungsten adsorption capacity decreases in the presence of co-occurring species since the co-occurring species suppress the adsorption. For the well water treated with biosorbent, the tungsten concentration in the product water was found to be lower than the detection limit (1 microg/L) of the inductively coupled plasma mass spectrometer (ICP-MS). The repeatable results obtained from the treatment of both simulated and well water suggest that using chitosan coated clay can be an efficient adsorbent for tungsten removal from contaminated sites.     

Bisphenol-A modified hyper-cross-linked polystyrene resin for salicylic acid removal from aqueous solution: adsorption equilibrium, kinetics and breakthrough studies

In this study, a series of bisphenol-A modified hyper-cross-linked polystyrene resins labeled as HJ-L00, HJ-L02, HJ-L04, HJ-L06 and HJ-L08 were synthesized, characterized and evaluated for adsorptive removal of salicylic acid from aqueous solutions. The structural characterization results indicated that the resins possessed predominant micropores/mesopores, moderate specific surface area and a few bisphenol-A groups on the surface. All the bisphenol-A modified hyper-cross-linked resins were effective for removing salicylic acid from aqueous solutions, and sample HJ-L02 had the largest adsorption capacity. The adsorption equilibrium data were correlated by the Freundlich isotherm model, and a positive adsorption enthalpy was obtained. The kinetic data were analyzed with two diffusion models and indicated that the intra-particle diffusion was the sole rate-controlling step in the first stage. The dynamic experimental results showed that the breakthrough point of the HJ-L02 adsorbent was at 90.2 BV (bed volume, 1 BV=10 mL) for a feed concentration of 500.0mg/L of salicylic acid, and 14.0 BV of 1% of sodium hydroxide could completely regenerate the HJ-L02 adsorbent column.     

丁酸壳聚糖液晶的临界行为研究

用偏光显微镜法测定了丁酸壳聚糖在四种酸性溶剂中的临界浓度值．发现临界浓度值（ｖ／ｖ％）与溶剂的酸性无关，都是１６％～１７％．在以二氯乙酸为溶剂时，不同丁酰化程度的丁酸壳聚糖有相同的临界浓度．用ＤＳＣ法测定了丁酸壳聚糖／二氯乙酸体系的临界温度，并绘制了相图．结果表明，浓度达６０％（ｗ／ｗ％）后，临界温度基本不再变化，稳定在３９℃左右．     

Preparation of composite monoliths of quaternized chitosan and diatom earth for protein separation

In this study, composite monoliths with porous structures were prepared using quaternized chitosan and diatom earth for protein separation. Quaternized chitosan (N-[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride) dissolved in water was mixed with diatom earth and crosslinked with glutaraldehyde under low-temperature conditions to form a cryogel. Interconnected porous monoliths were obtained after removing ice crystals from the cryogel. The monoliths adsorbed bovine serum albumin selectively from the solution mixture of bovine serum albumin and bovine ɤ-globulin, and bovine ɤ-globulin was recovered in the flow-through fraction. The adsorption selectivity was enhanced by changing the solution pH from 6.8 to 5.5. The adsorption of bovine serum albumin by the monolith was replicated at least five times following its washing with a buffer containing 400 mM NaCl and subsequent regeneration with a 10 mM acetate buffer. The composited monolith is a promising adsorbent for the removal of acidic proteins, such as serum albumin contamination in neutral proteins, for example, ɤ-globulins, in bioproduction processes.     

Preparation and adsorption properties of PAA-grafted cellulose adsorbent for low-density lipoprotein from human plasma

A new low-density lipoprotein (LDL) adsorbent with good adsorption performance has been obtained by use of a simple preparation procedure. Graft copolymerization of acrylic acid (AA) on to macroporous cellulose beads was performed with cerium ammonium nitrate (CAN) as a redox initiator. The effects of initiator concentration, monomer concentration, and reaction time on grafting were examined. In adsorption tests, several factors affecting adsorption of lipoproteins were investigated in detail. In-vitro study showed that this adsorbent could remove total cholesterol (TC), low-density lipoprotein-cholesterol (LDL-C), and triglyceride (TG) at levels of 5.55, 4.46, and 2.48 mg g⁻¹, respectively, from human plasma without substantially affecting high-density lipoprotein-cholesterol (HDL-C) and total proteins (TP). The adsorbent prepared in this work might be further studied for potential clinical application.     

胺基化壳聚糖树脂吸附分离茶多酚的研究

对珠状壳聚糖树脂进行胺基化改性,制备了胺基化珠状壳聚糖树脂,并用FTIR对胺基化珠状壳聚糖树脂进行了结构表征。利用该树脂对绿茶中茶多酚进行吸附分离,探讨了其吸附条件,考察了其吸附性能。结果表明,胺基化壳聚糖树脂对茶多酚的吸附既符合Langmuir等温式,也符合Freundlich等温式;本实验最佳吸附条件为:温度25℃,茶汤溶液pH值5,吸附时间2h;最大吸附量达到486.0mg/g。