多重散射方法研究轴对称空腔覆盖层的声学特性

发展了一种多重散射方法研究声学覆盖层的半数值半解析模型,分析了影响轴对称空腔结构声学性能的主要能量耗散机制。在球坐标条件下推导出轴对称空腔结构的位移和应力场基函数,通过对空腔表面基函数的数值积分,得到散射波和入射波之间的传输矩阵方程,结合分层介质声传播理论计算了周期性空腔结构覆盖层的反射、透射和吸声性能。研究结果表明;空腔共振是低频能量耗散的主要形式,边界条件对材料空腔结构的谐振特性影响很大,利用双空腔耦合共振可以拓宽材料的低频吸声频带;背衬对材料的高频吸声影响较小,材料的高频能量损耗取决于空腔的散射和波型转换特性。      

中国散裂中子源铁氧体加载腔的性能研究

利用同轴线理论分析了扫频工作的中国散裂中子源（CSNS）铁氧体加载同轴谐振腔的主要性能参数。给出了铁氧体加载腔在三维电磁场仿真计算中的建模过程,在场分析的基础上提出了陶瓷介质等效谐振电容的方法。将模拟计算得到的腔体的谐振特性与同轴线理论计算和实际腔体测量结果相比较,三者吻合得非常好。通过对腔体样机母排引入的寄生模的实验和模拟研究,提出了解决寄生模问题的方法;通过对腔体内铁氧体环的填充系数的研究,给出了短尺寸腔的扫频工作方案。     

0.3 THz TM10, 1, 0模同轴耦合腔链

通过本征方程研究了工作在太赫兹(THz)频段的高次模同轴谐振腔,讨论了TM_{m, 1, 0}模,TM_{m, 2.0}模与TM_{m, 1, 1}模的谐振频率与腔体的几何参数之间的关系,并给出了工作模式的选择依据。在此基础上,提出了一种新型的0.3 THz TM_{10, 1, 0}模同轴耦合腔链,使用等效电路模型和CST-MWS软件对耦合腔链的色散特性、特征阻抗和电场分布等冷腔特性进行了分析和仿真,并着重分析和总结了耦合腔链的几何参数对色散特性和特征阻抗的影响。研究结果表明:对于工作在THz频段的高次模同轴耦合腔链,采用TM_{10, 1, 0}模为工作模式是合理的选择; 工作于2π腔模的0.3 THz TM_{10, 1, 0}模同轴耦合腔链具有较大的特征阻抗,但模式间隔较小,因此可将其应用于窄带太赫兹扩展互作用器件; 增大高次模耦合腔链的耦合槽张角是增大模式间隔的最佳途径。     

反馈调制型同轴虚阴极振荡器

 对反馈调制型同轴虚阴极振荡器进行了理论分析和数值模拟研究,结果表明:该器件通过增加同轴谐振腔结构并引入反馈可以对入射电子束形成明显的调制效果,从而使得器件具有高束波转化效率和频率单一稳定的特性;同时输出微波的频率被器件结构中的同轴谐振腔锁定,调节腔参数可以在一定范围内对输出微波频率进行调谐;在二极管电压约为600 kV,电子束功率26.2 GW条件下,可以得到平均功率3.6 GW的微波输出,转换效率达到13.7%,主频为5.5 GHz,模式为TM₀₂模。     

左手介质对谐振腔谐振频率的影响

在谐振腔设计过程中, 谐振腔的品质因数以及谐振频率都是需要考虑的关键因素. 传统的方法是通过减小谐振腔的尺寸或者利用高次模来提高谐振腔的谐振频率, 但是由于两种方法都有其局限性, 导致设计结果并不理想. 通过理论计算与模拟仿真相结合的方法, 对影响谐振腔谐振频率的因素进行分析, 得出了填充介质的材料属性与谐振腔谐振频率的关系. 理论计算显示: 当用“左手介质”作为谐振腔的填充物质时, 可以在不改变谐振腔尺寸的基础上提高谐振频率. 高频结构仿真器(high frequency structure simulator)的仿真数据也证明了以上结果, 从而得出谐振腔的谐振频率可以不受谐振腔尺寸的限制. 相较于传统理论而言, 研究结论有进一步的发展, 为探索和设计新颖的谐振腔提供了理论依据.     

A coaxial HOM coupler for a superconducting RF cavity and its low-power measurement results

A resonant buildup of beam-induced fields in a superconducting radio frequency(RF)cavity may make a beam unstable or a superconducting RF cavity quench. Higher-order mode(HOM)couplers are used for damping higher-order modes to avoid such a resonant buildup. A coaxial HOM coupler based on the TTF (TESLA Test Facility)HOM coupler has been designed for the superconducting RF cavities at the Proton Engineering Frontier Project(PEFP)in order to overcome notch frequency shift and feed-through tip melting issues. In order to confirm the HOM coupler design and finalize its structural dimensions, two prototype HOM couplers have been fabricated and tested. Low-power testing and measurement of the HOM couplers has shown that the HOM coupler has good filter properties and can fully meet the damping requirements of the PEFP low-beta superconducting RF linac.     

计算波导加载谐振腔谐振频率的新方法

基于边界元法,提出了一种新的简单有效的计算速调管输出系统波导加载腔的谐振频率、场分布的方法。计算了一种矩形波导加载矩形谐振腔的常见结构。利用主模TE10波激励,在波导的端口处采用推导出的Robin-type边界条件,通过扫频的方式,观测选定场点的值,极值对应系统的谐振频率。数值结果表明:波导加载谐振腔的谐振频率要低于同尺寸谐振腔的频率,谐振腔内的电场分布也受到耦合孔的影响。利用边界元法计算波导加载腔这样的半开放系统,具有实现简单、计算精确度高、数据输入少、计算时间短等优点。     

回旋速调管调制腔模拟分析

 多腔回旋速调管中的调制腔采用内外腔同轴结构,对回旋电子注角向群聚起着关键作用。用场匹配理论及HFSS软件对调制腔冷腔特性进行了研究,对多种输入结构、耦合缝尺寸和方位、腔体长度、半径进行了模拟。分析表明,耦合狭缝中心线与输入波导轴线成45°,耦合缝长度达到0.72时,内外腔储能比值达到41.65;耦合缝尺寸对腔体Q值影响较大,但并非呈简单线性关系,并且Q值对缝长的变化比缝宽的变化要敏感得多;而狭缝尺寸变化对谐振频率的影响不大;计算了内外腔储能,得到了模式转换效率高、内外腔储能比高、性能优良的调制腔。     

A coaxial HOM coupler for a superconducting RF cavity and its low-power measurement results

A resonant buildup of beam-induced fields in a superconducting radio frequency (RF) cavity may make a beam unstable or a superconducting RF cavity quench. Higher-order mode (HOM) couplers are used for damping higher-order modes to avoid such a resonant buildup. A coaxial HOM coupler based on the TTF (TESLA Test Facility) HOM coupler has been designed for the superconducting RF cavities at the Proton Engineering Frontier Project (PEFP) in order to overcome notch frequency shift and feed-through tip melting issues. In order to confirm the HOM coupler design and finalize its structural dimensions, two prototype HOM couplers have been fabricated and tested. Low-power testing and measurement of the HOM couplers has shown that the HOM coupler has good filter properties and can fully meet the damping requirements of the PEFP low-beta superconducting RF linac.     

非线性光子晶体中原子辐射光场的非经典性质

讨论了非线性光子晶体微腔中二能级原子在相干场驱动下腔场的频谱特性及光子的统计性质.研究结果表明,当光子晶体的态密度很大时,如果腔场模与原子共振荧光Mollow峰的中心峰共振,则腔场的涨落压缩到量子散弹噪声之下,且与线性光子晶体微腔的情况相比其谱线峰值变大.当驱动场频率较大时光子服从亚Poisson分布,且非常接近Poisson分布. 关键词： 光子晶体 参量振荡 非弹性谱 二阶相关函数     

回旋管同轴谐振腔模式的选择

 为了研究回旋管工作模式的选择机理,分析了圆柱波导开放式谐振腔、光滑同轴谐振腔和纵向内开槽同轴谐振腔相应波导的色散特性,进而研究了这些谐振腔内模式竞争的问题。对同轴结构波导色散方程作了相应的数值计算,结果表明,同轴谐振腔利用自身色散曲线与谐振腔内外半径比值的数值关系,能够使在开放式谐振腔内无法工作的高阶模式在其内部稳定工作。最后,以德国卡尔斯鲁厄理工学院(KIT)研制的同轴回旋管为例,进行了相应的分析计算,结果表明纵向内开槽同轴谐振腔相对于光滑同轴谐振腔更适合高阶模式的稳定工作。     

非线性光子晶体中原子辐射光场的非经典性质

讨论了非线性光子晶体微腔中二能级原子在相干场驱动下腔场的频谱特性及光子的统计性质.研究结果表明,当光子晶体的态密度很大时,如果腔场模与原子共振荧光Mollow峰的中心峰共振,则腔场的涨落压缩到量子散弹噪声之下,且与线性光子晶体微腔的情况相比其谱线峰值变大.当驱动场频率较大时光子服从亚Poisson分布,且非常接近Poisson分布.     

多纵模短腔染料激光放大前后光谱的比较

实验观测了短腔染料激光器输出的多纵模激光及其经一级染料放大的激光光谱，比较了光谱特性。在一定情况下，短腔染料激光器的多纵模激光经放大器放大可产生一个至几个新纵模，新纵模与短腔染料激光器输出的纵模有相似的频率间隔、线宽及频率牵引等特征。新纵模产生属于三阶四光子混频（即四波混频）为主导的非线性光学效应。存在频率牵引表明，增益介质中的多波混频存在频率失配，在这一四波混频中光子能量并不守恒     

A Single-Ridged Coaxial Hybrid TE011 Coupler with High Mode Purity

We design a single-ridged coaxial hybrid coupler which excites a TE₀₁₁ mode of high mode content in a cylindrical cavity, resonating at 28.2GHz. The coupler consists of a WR-28 rectangular waveguide, a coaxial TE_n11 cavity, and a cylindrical TE₀₁₁ cavity. Both TE₃₁₁ coaxial cavity and TE₄₁₁ single-ridged coaxial cavity are analyzed to examine the TE₀₁₁ mode purity in the central cavity. Mode purity analysis is performed by a field expansion method using Fourier-Bessel orthonormal basis functions. Numerical calculations predict that the TE₄₁₁ single-ridged coaxial cavity excites the TE₀₁₁ mode with mode purity of 98.6%, which is improved by 3% higher compared with the TE₃₁₁ coaxial cavity. Measurements on the single-ridged coaxial coupler show a resonant frequency at 28.078GHz and ohmic and external Qs of 1560, 473 respectively, which are in good agreement with the simulated results of a 3-D finite element electromagnetic code.     

Helmholtz水声换能器弹性壁液腔谐振频率研究

针对传统Helmholtz水声换能器设计中刚性壁假设的局限性,将Helmholtz腔体的弹性计入到液腔谐振频率计算中,实现低频弹性Helmholtz水声换能器液腔谐振频率精确设计.基于细长圆柱壳腔体的低频集中参数模型,导出了腔体弹性引入的附加声阻抗表达式,得到了弹性壁条件下Helmholtz水声换能器等效电路图,给出了考虑了末端修正的弹性壁Helmholtz共振腔液腔谐振频率计算公式.利用ANSYS软件建立了算例模型,仿真分析了不同材质、半径、长度时的Helmholtz共振腔液腔谐振频率.结果对比表明弹性理论值与仿真值符合得很好,相比起传统的刚性壁理论计算结果,本文的弹性壁理论得出的液腔谐振频率值有所降低,与真实情况更加接近.本文的结论可以为精确设计低频弹性Helmholtz水声换能器提供理论支持.     

孔缝对金属腔体强电磁脉冲耦合特性影响研究

核电磁脉冲和高功率微波等强电磁脉冲易造成电子设备功能失效甚至损毁,在实际工程实施中用金属腔体对电子设备进行屏蔽是常用的强电磁脉冲抑制手段。基于电磁仿真计算,对含矩形孔缝金属腔体的强电磁脉冲耦合特性进行了系统研究,阐述了孔缝宽长比、腔体尺寸等因素对多种不同类型强电磁脉冲（核电磁脉冲、宽带高功率微波、窄带高功率微波）作用下腔体内耦合场的影响;并以此为基础,重点分析了强电磁脉冲与含孔缝金属腔体之间的作用机制。研究结果表明:不同类型强电磁脉冲耦合信号差异明显,金属腔体对强电磁脉冲的响应是腔体谐振模式、孔缝谐振频率与强电磁脉冲共同作用的结果;当腔体谐振模式、孔缝谐振频率在强电磁脉冲的带内时,腔体内部的耦合场会出现增强效应;特别地,腔体与孔缝间的相互作用还可造成腔体与缝隙的谐振频率发生偏移。因此,在为电子设备设计金属屏蔽外壳时,应基于不同强电磁脉冲的频带范围,对腔体与孔缝的尺寸进行综合设计,抑制腔体、孔缝谐振及谐振频率偏移,提升其强电磁脉冲防护性能。     

Scattering properties of an individual metallic nano-spheroid by the incident polarized light wave

The scattering properties of a metallic nano-spheroid under the illumination of different polarized light waves are investigated using 3D boundary element method. The influences of different geometrical sizes of the nano-spheroid and incident directions of the illuminating light wave on the scattering spectrum are studied for different incident polarized light waves. The results show that the metallic nano-spheroid has two intrinsic resonant modes, corresponding to different polarization states and resonant wavelengths. The scattering enhancement, the resonant wavelength, and the location of the enhanced optical field are strongly dependent on the polarization properties of the illuminating light waves, and they can be modulated by appropriately choosing the polarization directions of the incident light wave.     

Effect of metal boundaries on surface-wave spectrum in plasma-vacuum structures

The effect of metal on the surface-wave spectrum in cylindrical metal-plasma-vacuum-metal and metal-vacuum-plasma-metal waveguide structures and waveguides with a single metal boundary is investigated. It is shown that such boundaries can greatly affect the spectral properties of the waveguide and change the nature of surface-wave dispersion. Analytic expressions are obtained for the frequency of symmetrical surface waves in various spectrum intervals. The strong dependence of phase velocity on the size of the internal metal cylinder that is found can be convenient for beam and wave synchronization in a plasma waveguide.     

大耦合孔同轴输出腔的3维解析分析

 在高功率微波器件中，通常采用大耦合孔的同轴微波输出腔，该腔为3维结构。采用场等效原理将腔体、耦合孔及其输出负载(行波边界)进行分区,每个区域中的场由界面上的磁流密度决定。采用格林函数积分法可得每个区域中的3维场,再由各个区域的场匹配方程求得腔体的谐振频率、特性阻抗、有载品质因数、模式分布等参数。为腔体的计算和设计提供一种计算模型。     

500 nm continuous wave tunable single-frequency mid-IR light source for C-H spectroscopy

A computer controlled tunable mid-IR light source, based on single resonant difference frequency generation (DFG), is experimentally investigated. The DFG process is pumped by an external cavity tapered diode laser, tunable over a spectral range of 30 nm. Grating feedback to the single mode channel of the tapered diode narrows the spectrum and allows for tuning of the emitted spectrum in the range from 780 to 810 nm. The DFG process takes place intra-cavity in a high finesse diode pumped 1064 nm solid state Nd:YVO₄ laser cavity, using periodically poled LiNbO₃ as the nonlinear material. Based on this new approach, a tunable single-frequency output power exceeding 3 mW was obtained in the mid-IR tuning range from 2.9 to 3.4 ??m.