<Superscript>226</Superscript>Ra and <Superscript>228</Superscript>Ra determination in environmental samples by alpha-particle spectrometry

A complete methodology for ²²⁶Ra and ²²⁸Ra determination by alpha-particle spectrometry in environmental samples is being applied in our laboratory using ²²⁵Ra as an isotopic tracer. This methodology can be considered highly suitable for the determination of these nuclides when very low absolute limits of detection need to be achieved. The ²²⁶Ra determination can be performed at any time after the isolation of the radium isotopes from the analyzed samples while the ²²⁸Ra determination needs to be carried out at least six months later through the measurement of one of its grand-daughters. The method has been validated by its application to samples with known concentrations of these Ra nuclides, and by comparison with other radiometric methods.     

Migration processes of <Superscript>137</Superscript>Cs and <Superscript>90</Superscript>Sr in compartments of a lake ecosystem

Summary The dispersion of radioactive substances in the environment following nuclear weapon tests in atmosphere since 1954 and accidents to nuclear plants, like that in Chernobyl in 1986, have allowed us to study the migration processes of some radionuclides in complex ecosystems such as lakes are. In the present paper the behavior of ¹³⁷Cs and ⁹⁰Sr in different compartments of the Monterosi Lake (central Italy) was assessed. The ¹³⁷Cs concentration was measured in lake water as well as sediment, stream water, aquatic plant and fish samples. ⁹⁰Sr concentration in water and sediments was also determined. A total inventory of 4206±76 Bq ^. m^-2 and 958±79 Bq ^. m^-2 (on 27/6/01) has been found for ¹³⁷Cs and ⁹⁰Sr, respectively. The experimental data presented here allow to calibrate theoretical models predicting the temporal trend of radionuclide concentration in similar ecosystems. Moreover, information on cesium and strontium migration processes can be extended to other pollutants having similar environmental behavior.     

Mixing of atmospheric <Superscript>210</Superscript>Pb and <Superscript>7</Superscript>Be and <Superscript>137</Superscript>Cs and <Superscript>90</Superscript>Sr fission products in four characteristic soil types

Depth distribution of atmospheric ²¹⁰Pb and ⁷Be and ⁹⁰Sr and ¹³⁷Cs fission products was measured in two types of aeolian soils (desert dust and volcanic ash), irrigated paddy soil and strongly acidic soil. The depth dependence of ²¹⁰Pb, ⁷Be and ¹³⁷Cs show that these radionuclides have been diffused as solid soil particles in surface soil layers. In aeolian soil layers, about 50% of ⁹⁰Sr were diffused in surface soil layer and the remaining 50% had penetrated to deeper layers. The half of the fission particles containing ⁹⁰Sr were shown to have decomposed over the past 35 years.     

Atmospheric depositional fluxes of cosmogenic <Superscript>32</Superscript>P, <Superscript>33</Superscript>P and <Superscript>7</Superscript>Be in the Sevastopol region

⁹⁰Y was separated from ⁹⁰Sr using an extraction chromatographic resin consisting of 4, 4′(5′)-bis-t-butylcyclohexano-18-crown-6 (DtBuCH₁₈C₆), 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl) amide (C₂mimNTf₂), and a polymer (Amberlite XAD-7). Ionic liquid was introduced into the column to improve the separation efficiency. The column showed an excellent performance for the separation of Y from Sr. After the separation, the ratio of ⁹⁰Sr/⁹⁰Y was <2.0 × 10^?5; the column was recycled for >18 times. This study provides preliminary results on columns to produce ⁹⁰Y with a high purity in radiopharmaceuticals.     

Methodology for determination of <Superscript>89</Superscript>Sr and <Superscript>90</Superscript>Sr in radiological emergency: II. Method development and evaluation

In this work a method for the determination of both ⁸⁹Sr and ⁹⁰Sr is presented. The method can potentially be used in radiological emergency and deliver results shortly after an incident. The method development was based on theoretical calculations of potential interferences from other fission products and how these could be discriminated when applying different chemical separation schemes. Validation was done on reactor coolant water containing short-lived fission products, and on a reference material. The results indicate that correct results of ⁸⁹Sr and ⁹⁰Sr can be obtained 4 and 9 days, respectively, after an incident.     

Variation of <Superscript>231</Superscript>Pa, <Superscript>230</Superscript>Th and <Superscript>231</Superscript>Pa<Subscript>ex</Subscript>/<Superscript>230</Superscript>Th<Subscript>ex</Subscript> in surface sediments of the Sabah–Sarawak coastal waters

Protactinium and thorium activities were measured in eight surface sediment taken in 2004 to determine effectiveness scavenging of ²³¹Pa at Sabah–Sarawak coastal waters. The result found that activity ratios of ²³¹Pa_ex/²³⁰Th_ex were ranged from 0.07 to 0.13 at all sampling stations. The high ²³¹Pa_ex/²³⁰Th_ex activity ratio than the production ratio of 0.093 in seawater at station SR 01, SR 02, SR 04, SB 02 and SB 05, revealed that ²³¹Pa is effectively removed from the water column into the sediment in comparison with ²³⁰Th at those stations. Low percentage of ²³⁰Th_ex (90–95%) in comparison with ²³¹Pa_ex at all stations can be attributed to less efficiently scavenged of ²³⁰Th onto particles prior deposited at the marine sediment bed.     

Simultaneous determination of <Superscript>89</Superscript>Sr and <Superscript>90</Superscript>Sr: comparison of methods and calculation techniques

The presence of ⁸⁹Sr and ⁹⁰Sr in the biosphere constitutes a biological hazard. There are several analytical methods for the determination of ⁸⁹Sr and ⁹⁰Sr. Three analytical methods of various application fields using selective Sr resin for Sr separation and DGA resin for Y separation and measuring techniques, i.e. liquid scintillation spectrometry and Cerenkov counting are discussed in the paper. The calculation techniques are compared in the aspects such as trueness and accuracy of the results and the limit of detection. Uncertainties and detection limits are calculated using the spreadsheet method.     

Distribution characteristics of <Superscript>14</Superscript>C and <Superscript>3</Superscript>H in spent resins from the Canada deuterium uranium-pressurized heavy water reactors (CANDU-PHWRs) of Korea

It is regarded that the spent resins from the water purification systems of moderator (MOD) and the primary coolant of the Canada deuterium uranium-pressurized heavy water reactor (CANDU-PHWR) are a unique waste, owing to their high ¹⁴C and gamma-emitting nuclides. In this work, ¹⁴C and ³H contents, anion and cation fractions and the predominant gamma-emitting nuclides of the spent resins from 4 units of CANDUPHWRs, were investigated. Also the chemical species of ¹⁴C of the spent resins were determined. For a simultaneous separation of ¹⁴C and ³H from the spent resins, the wet oxidation-16 wt% H₂SO₄ stripping process was utilized. The ¹⁴C and ³H activity concentration range of the spent resins of the nuclear power plant (NPP), 4 units of all CANDU-PHWR types, was 2.48E5 Bq/g ∼5.33E6 Bq/g, 1.29E5 Bq/g and ∼2.33E5 Bq/g, respectively. Among the analyzed spent resins, the highest ¹⁴C and ³H activity concentration was detected in units 4 and 3, respectively. It was found that more than 92% of the ¹⁴C activity concentration was retained on the anion resin and the predominant chemical species was inorganic ¹⁴C. It was revealed that the anion resin fraction of the spent resins from unit 1 and unit 2, was about 40% and that of unit 3 and unit 4 was around 60%. More than 80% of the total gamma-radioactivity concentration was associated with the cation fraction of the spent resin. The predominant gamma-emitting nuclide of the spent resin for unit 2 was ¹³⁷Cs, a fission product, and that for unit 4 was ⁶⁰Co, a corrosion product.     

Behavior of <Superscript>134</Superscript>Cs, <Superscript>90</Superscript>Sr,and <Superscript>238</Superscript>Pu in different Syrian soils

The experiment aimed to evaluate the vertical migration of ¹³⁴Cs, ⁹⁰Sr and ²³⁸Pu in the main types of Syrian soils; entisol, inceptisol, alluvial (rock outcrops) and gypsiferous soils, using soil columns through which the aqueous solution of the radionuclides percolated. The results show that the vertical migration of the studied radionuclides through the soil profile depend on the radionuclide and the soil type. More than 97% of ¹³⁴Cs and ²³⁸Pu concentrated in the upper 2 cm of the entisol, inceptisol, and alluvial soils, whereas only 46.2% to 68.6% of the ⁹⁰Sr was retained in the upper 2 cm of these soils. The vertical migration of the studied radionuclides in the gypsiferous soil was different from the other soils. The distribution of the radionuclides in the gypsiferous soil was irregular through the soil profile and reached the deeper layer of the soil. This may be due to its physical characteristics; poor structure stability, high permeability and low retention capacity.     

European measurement comparison of <Superscript>137</Superscript>Cs, <Superscript>40</Superscript>K and <Superscript>90</Superscript>Sr in milk powder

Recently, the Institute for Reference Materials and Measurements (IRMM) has assumed responsibility for organizing regular measurement comparisons among those laboratories which provide radioactivity monitoring data from their country to authorities of the European Commission (EC) under various EC legislation articles. The most recent exercise under this International Comparison Scheme for Radioactivity Environmental Monitoring (ICS-REM) in measuring the ¹³⁷Cs, ⁴⁰K and the ⁹⁰Sr activity concentration in milk powder is presented here. The complete cycle of the comparison is described, including the establishment of reference values traceable to SI units, the demonstration of the homogeneity of the distributed samples, the treatment and measurement of samples in the participating laboratories, and the evaluation of the results.     

Systematic radiochemical separation for the determination of <Superscript>99</Superscript>Tc, <Superscript>90</Superscript>Sr, <Superscript>94</Superscript>Nb, <Superscript>55</Superscript>Fe and <Superscript>59,63</Superscript>Ni in low and intermediate radioactive waste samples

A simple and rapid separation procedure was systemized for the determination of ⁹⁹Tc, ⁹⁰Sr, ⁹⁴Nb, ⁵⁵Fe and ^59,63Ni in low and intermediate level radioactive wastes. The integrated procedure involves precipitation, anion exchange and extraction chromatography for the separation and purification of individual radionuclide from sample matrix elements and from other radionuclides. After separating Re (as a surrogate of ⁹⁹Tc) on an anion change resin column, Sr, Nb, Fe and Ni were sequentially separated as follows; Sr was separated as Sr (Ca-oxalate) co-precipitates from Nb, Fe and Ni followed by purification using Sr-Spec extraction chromatographic resin. Nb was separated from Fe and Ni by anion exchange chromatography. Fe was separated from Ni by anion exchange chromatography. Ni was separated as Ni-dimethylglyoxime precipitates after the removal of ^134,137Cs and ^110mAg by Cs-phosphotungstate and AgCl precipitation, respectively. Finally, the radionuclide sources were prepared by precipitation for their radioactivity measurements. The reliability of the procedure was evaluated by measuring the recovery of chemical carriers added to a synthetic radioactive waste solution.     

Validation of <Superscript>90</Superscript>Sr separation method using molecular recognition product AnaLig<Superscript>®</Superscript> Sr01 gel and extraction chromatography Sr<Superscript>®</Superscript> resin

Two separation techniques for strontium determination using AnaLig^® Sr01 molecular recognition technology and extraction chromatography Sr^®  resin were tested. The methods performance was investigated by analysis of NPL (High Alpha–Beta 2003) intercomparison sample. The results obtained for both procedures were compared in terms of activities and recoveries. Data analysis proved a good agreement with the reference values. The AnaLig^® Sr01 separation method for ⁹⁰Sr determination was successfully validated with the same performance as the Sr^® resin method.     

Separation and purification of <Superscript>249</Superscript>Cf and <Superscript>245</Superscript>Cm

There is a need to provide radioactivity standards of the higher actinides in support of both decommissioning and remediation activities as well as routine environmental analysis. In the case ²⁴⁹Cf, this will provide a useful calibration nuclide for both α-and γ-spectrometry as well as improving knowledge of the decay scheme for this nuclide. There is anecdotal evidence to suggest that the chemical yield of americium and curium may differ in radiochemical analysis. Thus, a chemical yield tracer of ²⁴⁵Cm may help to resolve this issue and will be suitable for both, suitable for use as a chemical yield tracer for both α-particle spectrometry and mass spectrometry. An aged source of ²⁴⁹Cf was used as the source material for the separation of these two nuclides by cation-exchange, using 2-hydroxy-2-methyl-propanoic acid at controlled pH as an eluant, ²⁴⁹Cf being eluted before the ²⁴⁵Cm daughter. The purity of both nuclides was measured by γ-ray spectrometry.     

Sequential separation of <Superscript>99</Superscript>Tc, <Superscript>94</Superscript>Nb, <Superscript>55</Superscript>Fe, <Superscript>90</Superscript>Sr and <Superscript>59/63</Superscript>Ni from radioactive wastes

A sequential separation procedure has been developed for the determination of ⁹⁹Tc, ⁹⁴Nb, ⁵⁵Fe, ⁹⁰Sr and ^59/63Ni in various radioactive wastes generated from nuclear power plants. Ion exchange and extraction chromatography were adopted for individual separation of the radionuclides. Precipitation was supplementarily utilized for both purification of the individual radionuclides and preparation of the radionuclide sources for use in a radioactivity measurement. The chromatographic separation behavior of the radionuclides both from the sample matrix metals and from one another was investigated using stable metals, Re (as a surrogate of ⁹⁹Tc), Nb, Fe, Sr and Ni. The validity of the procedure for reliability and applicability was evaluated by measuring the recovery of the metal carriers added to synthetic radioactive waste solutions. The recoveries by the chromatographic separation were in the range of 84.8 to 102.2% with 2s of less than 8.6%, the recoveries by the precipitation being in the range of 84.3 to 97.3% with 2s of less than 10.9%.     

Study of HDEHP-PAN solid extractants for the determination of <Superscript>90</Superscript>Sr

Solid extractants containing di-(2-ethylhexyl)phosphoric acid (HDEHP) in the support based on modified polyacrylonitrile (PAN) were studied for the determination of ⁹⁰Sr by means of measuring the activity of its separated ⁹⁰Y daughter. In this paper, ¹⁵²Eu and ¹³³Ba were used as chemical homologues of ⁹⁰Y and ⁹⁰Sr. For these radionuclides, dependences of mass distribution coefficients (D _g) on the nitric acid concentration were measured for several types of HDEHP-PAN solid extractants. The mechanism of the Eu³⁺ and Ba²⁺ ions extraction was confirmed to follow the theoretical two-phase equation for the chelating extractants. Further, the influences of the presence of nitrates, calcium and iron ions on the values of D _g(Ba, Eu) were determined concentrating on the possibility of masking the iron ions by the addition of the ascorbic acid. This method was tested on the solution simulating the leachate of ashed green plant sample. The results obtained make the application of solid extractants containing HDEHP in PAN support prospective for ⁹⁰Sr determination.     

Determination of radionuclidic impurities in <Superscript>99m</Superscript>Tc eluate from <Superscript>99</Superscript>Mo/<Superscript>99m</Superscript>Tc generator for quality control

Technetium-99m is the principal radioisotope used in medical diagnostics; radionuclidic impurity is the major concern of its quality. This work presents a analytical method for sequential determination of all radionuclidic impurities listed in pharmacopoeia including gamma emitters, alpha emitters, ⁸⁹Sr and ⁹⁰Sr. Radioactive decay for removal of ^99mTc, ion exchange and extraction chromatography for removal of ⁹⁹Mo and ⁹⁹Tc are effective for separation of interferences. Gamma spectrometry, LSC with alpha/beta discrimination, and Cherenkov counting using LSC are sensitive methods for measurement of the impurity radionuclides. The detection limits of this method are well meet the requirement of the quality control according to the limitation of the pharmacopoeia.     

Determination of <Superscript>90</Superscript>Sr, <Superscript>129</Superscript>I and gross beta radioactivity concentration in some teas

In this study, ⁹⁰Sr (540 keVβ ⁻), ¹²⁹I (150 keVβ ⁻) and the gross beta radioactivity concentrations were determined for the samples of tea as the most leading consumed hot drink in the markets (processed and packaged for sale) in our country. Furthermore, the obtained data were statistically analyzed. For determination of ¹²⁹I (150 keVβ⁻), ⁹⁰Sr (540 keVβ⁻) and gross radioactivity concentrations in tea samples, a sensor system consisting of scintillation detector with BP4 probe sensitive to beta radiation and a radiation meter (ST7) configurable for windows at desired power was used.     

A practical method for monitoring <Superscript>129</Superscript>I concentration in airborne release

Summary To establish a practical method for monitoring ¹²⁹I concentration in airborne release from the Tokai reprocessing plant, the ¹²⁹I collecting performance of sampling media used was tested by in situ experiments. The results indicated that the combined use of an activated charcoal-impregnated filter paper and an activated charcoal cartridge gives a collection efficiency of more than 90% for a one-week sampling of real airborne effluent, at sampling flow rates of 40.6-75.0 l^. min^-1. The sampling and measurement conditions suitable for a routine-base monitoring are demonstrated.     

Determination of <Superscript>3</Superscript>H, <Superscript>226</Superscript>Ra, <Superscript>222</Superscript>Rn and <Superscript>238</Superscript>U in Austrian ground- and drinking water

Screening measurements for ³H, ²²⁶Ra, ²²²Rn and ²³⁸U in ground water were performed within a ground- and drinking water project in Austria. The aim of this project is to get an overview of the distribution of natural radionuclide activity concentration levels in ground water bodies. In some cases this water is used for drinking water abstraction. In this paper methods and results of the screening measurements are presented. Regions with high activity concentrations were identified and in these regions further investigation for ²²⁸Ra, ²¹⁰Pb and ²¹⁰Po will be conducted.     

Quinolinephosphomolybdate as ion exchanger: synthesis,characterization, and application in separation of <Superscript>90</Superscript>Y from <Superscript>90</Superscript>Sr

An inorganic ion exchanger, quinolinephosphomolybdate has been synthesized and characterized by elemental analysis, infrared (IR) and X-ray diffraction (XRD) spectroscopy. This compound is highly stable toward thermal, chemical and radiation dose. This has been employed in the separation of carrier-free ⁹⁰Y from its parent ⁹⁰Sr from an equilibrium mixture. The absorbed daughter was recovered by using 0.0284 mol L⁻¹ ascorbic acid solutions at pH 5.0 as eluting agent.