Synthesis of imidazo[4,5-<Emphasis Type="Italic">e</Emphasis>]benzo[1,2-<Emphasis Type="Italic">c</Emphasis>;3,4-<Emphasis Type="Italic">c</Emphasis>´]difuroxanes

A method for the synthesis of imidazo[4,5-e]benzo[1,2-c;3,4-c´]difuroxanes, potential nitric oxide donors, has been developed. The synthesized compounds were characterized by IR and NMR spectroscopy, high resolution mass spectrometry, and elemental analysis.     

Synthesis of New Thieno[2,3-<Emphasis Type="Italic">b</Emphasis>:5,4-<Emphasis Type="Italic">c</Emphasis>′]dipyridines

Summary. We describe the formation of thieno[2,3-b:5,4-c]dipyridines from 5,6-dihydropyridine-2(1H)-thiones. The two-step reaction mechanism was revealed by isolation of an intermediate. The oxo and thioxo groups of the obtained tricyclic compounds were hydrogenated selectively. The structures of all new compounds were elucidated by NMR experiments.Received December 17, 2002; accepted December 20, 2002 Published online June 2, 2003     

<Emphasis Type="Italic">N</Emphasis>-arylsulfanyl-<Emphasis Type="Italic">N</Emphasis>-arylsulfonyl(acyl)-<Emphasis Type="Italic">N</Emphasis>′-phenylthiourea sodium salts

Reactions of N-arylsulfonyl(acyl)arenesulfenamide sodium salts with phenyl isothiocyanate afforded N-arylsulfanyl-N-arylsulfonyl(acyl)-N-phenylthioura sodium salts which were found to increase thermal stability of finely dispersed poly(vinyl chloride).Translated from Zhurnal Organicheskoi Khimii, Vol. 40, No. 10, 2004, pp. 1532–1535.Original Russian Text Copyright © 2004 by Koval, Oleinik.     

Crystal structure of the molecular complex of 1,3,5-<Emphasis Type="Italic">tris</Emphasis>-<Emphasis Type="Italic">m</Emphasis>-chlorophenylisocyanurate with ε-caprolactone

The molecular complexes of 1,3,5-tris-m-chlorophenylisocyanurate and ε-caprolactone were synthesized by the reaction of the latter with 3-chlorophenylisocyanate in the presence of triethylamine. Single crystals were grown, and the molecular and crystal structures of the synthesized complexes were investigated.     

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

Rhodium(I) pentasubstituted cationic complexes on the basis of 1,2-<Emphasis Type="Italic">O</Emphasis>-Alkylidene-3,5,6-<Emphasis Type="Italic">O</Emphasis>-phosphinetriyl-α-<Emphasis Type="SmallCaps">D</Emphasis>-glucofuranose

Reaction of 1,2-O-alkylidene--D-glucofuranose 3,5,6-phosphites with dicarbonylrhodium(I) acetylacetonate was studied. The structure of the reaction products is determined by the reagent ratio. At a 5:1 molar ratio, the step ligand-exchange process yields chiral complexes of the [RhL₅]⁺acac^– type. Dynamics of and anion exchange in these complexes are considered.Translated from Zhurnal Obshchei Khimii, Vol. 74, No. 9, 2004, pp. 1418–1421.Original Russian Text Copyright © 2004 by A. Koroteev, Teleshov, M. Koroteev, and Nifantev.This revised version was published online in April 2005 with a corrected cover date.     

Basicity of Highly Substituted β-Octaalkyl-<Emphasis Type="Italic">meso</Emphasis>-aryl- and -<Emphasis Type="Italic">meso</Emphasis>-thienyl Porphyrins

5-Phenyl-, 5,15-diphenyl-5,15-di(thiophen-2-yl)-, and 5,10,15,20-tetraphenyloctaalkyl-21H,23H-porphyrins in benzene–acetic acid mixtures are moderate bases (pK–0.27 to–2.48). There is no simple correlation between the basicity constants and any electronic or geometric structure parameter of their molecules due to the contributions of three factors to the basicity: distortion of the planar structure in highly substituted macrocycles and their protonated forms, positive charge delocalization over the conjugated bond system, and electronic effects of substituents.     

Determination of the <Emphasis Type="Italic">R</Emphasis> ⇄ <Emphasis Type="Italic">S</Emphasis> enantiomerization barrier in 5,6-dihydrobenzoimidazo[1,2-<Emphasis Type="Italic">c</Emphasis>]quinazolines

Chiral imidazoquinazolines undergoing thermally induced reversible R ⇄ S enantiomerization have been synthesized by the interaction of 2-(o-aminophenyl)benzimidazoles with aldehydes and ketones. The benzimidazole fragment has been used for the first time as an indicator group in temperature-dependent ¹H NMR spectra for determining the energy barrier of this rearrangement. The effects of nearby substituents on the kinetic and activation parameters, and on the recyclization mechanism have been investigated.     

Synthesis and reactivity of 2-(2-furyl)-1,7-dimethyl-1<Emphasis Type="Italic">H</Emphasis>,7<Emphasis Type="Italic">H</Emphasis>-benzo[1,2-<Emphasis Type="Italic">d</Emphasis>: 3,4-<Emphasis Type="Italic">d</Emphasis>′]diimidazole

2-(2-Furyl)-1,7-dimethyl-1H,7H-benzo[1,2-d: 3,4-d′]diimidazole was synthesized by the Weidenhagen reaction followed by N-methylation. Electrophilic substitution reactions of the title compound (nitration, bromination, sulfonation, formylation, and acylation) involved both the furan ring and central benzene fragment.     

Properties of a poly(ethylene glycol)-<Emphasis Type="Italic">block</Emphasis>-poly(<Emphasis Type="Italic">γ</Emphasis>-benzyl <Emphasis Type="SmallCaps">l</Emphasis>-glutamate)-<Emphasis Type="Italic">graft</Emphasis>-poly(ethylene glycol) copolymer membrane

Poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) (PEG-block-PBLG-graft-PEG) copolymer was synthesized by the ester exchange reaction of PBLG-block-PEG copolymer with a PEG chain. Surface morphology of the PEG-block-PBLG-graft-PEG copolymer membrane was characterized by atomic force microscopy (AFM). Mechanical and chemical properties of the PEG-block-PBLG-graft-PEG copolymer membrane were investigated by tensile testing and contact angle testing. The effects of grafting ratio on the properties of PEG-block-PBLG-graft-PEG copolymer membrane were primarilly studied.     

SBR composites reinforced with <Emphasis Type="Italic">N</Emphasis>-isopropyl-<Emphasis Type="Italic">N</Emphasis>′-phenyl-<Emphasis Type="Italic">P</Emphasis>-phenylenediamine-modified clay

SBR compounds including the N-isopropyl-N’-phenyl-p-phenylenediamine-modified clay(organoclay) were prepared.Effects of modified clay and antioxidant(IPPD) contents on mechanical and rheological properties of SBR composites were studied.FTIR results confirmed that the clay was chemically modified by IPPD and changed into an organoclay.X-ray diffraction(XRD) results confirmed the increase in interlayer distance of the clay due to the insertion of IPPD.Rheological and cure characteristics of SBR compounds were determined using RPA(Rubber Process Analyzer) and rheometer.Scorch time and cure time of SBR compounds decreased with introduction of the organoclay.Mechanical properties and heat aging resistance of the SBR composites were improved significantly by incorporation of the organoclay.     

1,3-Diamino-2-Hydroxypropane-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-Tetraacetic Acid: Crystal and Molecular Structures

The synthesis, IR spectroscopic study, and X-ray diffraction analysis (CIF file CCDC no. 1574078) are carried out for 1,3-diamino-2-hydroxypropane-N,N,N′,N′-tetraacetic acid (I). The structural units of a crystal of compound I are (H_4.5HPdta)^0.5– anions, (H_5.5HPdta)^0.5+ cations, and molecules of water of crystallization joined by a branched network of hydrogen bonds: strong intermolecular O–H…O and intramolecular N–H…O bonds.     

Facile cellulose nanofibrils amidation using a ‘<Emphasis Type="Italic">one</Emphasis>-<Emphasis Type="Italic">pot</Emphasis>’ approach

We report a ‘one-pot’ synthetic approach for TEMPO (2,2,6,6-tetramethyl-piperidin-1-oxyl) oxidized cellulose nanofibrils (TOCN) surface amidation by coupling up to 70% of superficial carboxylic units in TOCN with long alkyl chain primary amines (dodecylamine and octadecylamine) using TBTU [O-(1H-benzotriazol-1-yl)-N,N,N’,N’-tetramethyluronium tetrafluoroborate] uronium salt as coupling agent. Raw TOCNs were produced from commercial microcrystalline cellulose and have an elongated highly tangled morphology with nanometric diameters and lengths up to several micrometers with a crystallinity of 62%. TOCN´s degree of oxidation was 1.25 mmol –COOH groups/g cellulose. The TOCN-amidated products named TOCN-AMDC12 and TOCN-AMDC18 depending upon to the primary amine used for the synthesis (dodecylamine –C12– for the former and octadecylamine –C18– for the latter), were characterized using field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy with attenuated total reflectance and X-ray diffraction. After amidation the hydrated gel-like TOCNs become a cream-colored gel insoluble in water and soluble in toluene. IR data indicates formation of an amide bond after the reaction, and FESEM images suggest a slight increase in fibril width as a result of the long-chain amide derivatives grafted onto the TOCN’s surface. Thermal stability and hydrophobicity of the products were determined using thermogravimetrical analysis and contact angle (CA) measurements. The TOCN-amidated products showed improved thermal properties with maximum decomposition temperatures of 347 and 358 °C, for TOCN-AMDC12 and TOCN-AMDC18 respectively, when compared to the raw TOCN (T_d 340 °C); and high hydrophobicity with CA of 61° and 67°, respectively. Finally, the proposed method for TOCN amidation has advantages over current amidation approaches in that it is performed in aqueous media, does not require heating and occurs rapidly (2 h).     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.     

Preparation of surfactant-free nanoparticles of methoxy poly(ethylene glycol)-<Emphasis Type="Italic">b</Emphasis>-poly(D,L-lactide-<Emphasis Type="Italic">co</Emphasis>-glycolide-<Emphasis Type="Italic">co</Emphasis>-ɛ-caprolactone)

Surfactant-free nanoparticles of methoxy poly(ethylene glycol)-b-poly(D,L-lactide-co-glycolide-co-ɛ-caprolactone) diblock copolymers (MPEG-b-PDLLGCL) with different DLL:G:CL ratios were prepared by modified-spontaneous emulsification solvent diffusion method. Sizes of resulted colloidal nanoparticles obtained from light-scattering analysis were in the range of 121–132 nm with narrow size distribution. The nanoparticle sizes depended on the composition of the PDLLGCL block. Scanning electron microscopy demonstrated that the nanoparticles were aggregated after drying process, suggested they were soft nanoparticles. However, their initial aggregates can be observed and it was shown that the nanoparticles have spherical shape with smooth surface. The text was submitted by the authors in English.     

Synthesis of lupane and 19<Emphasis Type="Italic">β</Emphasis>,28-epoxy-18<Emphasis Type="Italic">α</Emphasis>-oleanane 2,3-<Emphasis Type="Italic">seco</Emphasis>-derivatives based on betulin

The α-hydroxyoximes of methyl betulonate and allobetulone were synthesized. Beckmann fragmentation of them produced the lupane and 19β,28-epoxy-18α-oleanane 2,3-seco-derivatives. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 491–494, September-October, 2008. Original article submitted July 4, 2008.     

Alkyl <Emphasis Type="Italic">β</Emphasis>-<Emphasis Type="SmallCaps">d</Emphasis>-cellulosides: non-reducing cellulose mimics

Non-reducing cellulose mimics, termed alkyl β-d-cellulosides, were successfully prepared by two efficient multi-step syntheses starting from commercially available microcrystalline cellulose or cellulose triacetate. Introduction of the alkoxy moiety and degradation of the cellulose backbone was carried out in the presence of a Lewis acid, on one hand. On the other hand, cellulose hydrolysis mediated by mineral acids was combined with β-glycosidation performed in the presence of silver salts. The samples obtained possess a number-average degree of polymerization from 5 to 25, determined by size-exclusion chromatography, elemental analyses, NMR spectroscopy, and MALDI-TOF mass spectrometry. Samples in multi-gram quantities were available. Selective formation of a β-glycosidic bond between the C-1 atom of the reducing end group and alkoxy moieties was confirmed by a combination of 2D NMR spectroscopic and MALDI-TOF MS techniques. Due to the blocking of the aldehyde function, the cellulosides described are very useful mimics for the investigation of polysaccharide interactions with other complex molecules such as proteins or to determine polymer properties in solution or in solid state.     

Complex formation of magnesium and calcium ions with trimethylenediamine-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>’,<Emphasis Type="Italic">N</Emphasis>’-tetraacetic acid

Stability constants and heat effects of the formation reactions of magnesium and calcium trimethylenediaminetetraacetates at 298.15 K and ionic strength of 0.1, 0.5, and 1.0 (mol/L KNO₃) have been determined by means of potentiometry and calorimetry. Standard thermodynamic parameters (log K⁰, Δ_rG⁰, Δ_rH⁰, and Δ_rS⁰) of the studied equilibriums have been determined.     

Synthesis of 20<Emphasis Type="Italic">S</Emphasis>-protopanaxadiol <Emphasis Type="Italic">β</Emphasis>-D-galactopyranosides

20S-Protopanaxadiol (3β,12β,20S-trihydroxydammar-24-ene) 3-, 12-, and 20-O-β-D-galactopyranosides were synthesized for the first time. Condensation of 12β-acetoxy-3β,20S-dihydroxydammar-24-ene (1) and 2,3,4,6-tetra-O-acetyl-α-D-galactopyranosylbromide (α-acetobromogalactose) (2) under Koenigs–Knorr conditions with subsequent removal of the protecting groups resulted in regio- and stereoselective formation of 20S-protopanaxadiol 3-O-β-D-galactopyranoside, an analog of the natural ginsenoside Rh₂. Glycosylation of 12β,20S-dihydroxydammar-24-en-3-one (5) by 2 with subsequent treatment of the reaction products with NaBH₄ in isopropanol and deacetylation with NaOMe gave 20S-protopanaxadiol 12- and 20-O-β-Dgalactopyranosides.     

Thermophysical properties of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimеthylacetamide mixtures with <Emphasis Type="Italic">n</Emphasis>-butanol

The refraction, dielectric, viscosity, density, data of the binary mixtures of N,N-dimethylacetamide (DMA) with n-butanol at 308.15 and 313.15 K. The measured parameters used to obtain derived properties like Bruggeman factor, molar refraction and excess static dielectric constant, excess inverse relaxation time, excess molar volume and excess viscosity, excess molar refraction. The variation in magnitude with composition and temperature of these quantities has been used to discuss the type, strength and nature of binary interactions. Results confirm that there are strong hydrogen-bond interactions between unlike molecules of DMA+ n-butanol mixtures and that 1: 1 complexes are formed and strength of intermolecular interaction increases with temperature.