共查询到18条相似文献,搜索用时 125 毫秒
1.
应用于膜蒸馏过程的F26微孔膜的初步研究 总被引:2,自引:0,他引:2
以N-甲基吡咯酮作为溶剂 ,丙酮为溶胀剂 ,聚乙二醇 4 0 0为添加剂利用相转换法制备出偏氟乙烯 六氟丙烯共聚物 (F2 6 )的疏水微孔膜并且应用在膜蒸馏过程中 .研究了丙酮以及N 甲基吡咯酮 丙酮体系对膜参数以及结构的影响 .通过SEM观察了膜的微观结构 ,发现用N 甲基吡咯酮 丙酮体系制得的微孔膜兼具指状孔和海绵状孔结构 .无添加剂条件下制得的F2 6膜其对蒸馏水的接触角比相同条件下制备的PVDF膜大 .在用相转换法制备的F2 6和PVDF的疏水膜中 ,选择具有适当孔径结构的微孔膜用于膜蒸馏实验 ,F2 6膜的膜蒸馏系数比PVDF膜来得大 ,相同操作条件下的膜蒸馏通量也比PVDF膜高 . 相似文献
2.
3.
4.
添加剂对PVDF相转化过程及膜孔结构的影响 总被引:20,自引:0,他引:20
研究了PVP、PEG及LiCl 3种成孔添加剂下PVDF DMAc H2 O 添加剂体系的成膜机理 .无论那种添加剂的铸膜液相转换成膜过程中都存在凝胶分相和液液分相两种相变方式 ,在 30~ 6 0℃时凝胶分相在较低的非溶剂浓度下先于液液分相发生 ,LiCl作为添加剂较PEG、PVP对铸膜液有较强的致凝胶作用 ,成膜过程中凝胶分相段时间依PVP、PEG、LiCl的顺序延长 ,导致液液分相初始分相点处聚合物浓度增大 ,阻止了大孔结构的充分发展 .制得的膜依PVP、PEG、LiCl的顺序有效孔隙率和通量降低 ,结晶度升高 .以LiCl为添加剂制得的膜几乎不改变PVDF膜的疏水性 ,而以PVP或PEG为添加剂的膜隔水压差降低约 2 0kPa . 相似文献
5.
亲水膜的表面改性及在膜蒸馏中的应用 总被引:4,自引:0,他引:4
膜的微孔性和疏水性是水溶液膜蒸馏的两个基本条件,迄今人们均采用疏水性高分子材料制成疏水微孔膜用于膜蒸馏研究。本文采用辐照接枝聚合和等离子体表面聚合的方法,将亲水的醋酸纤维素微孔膜和硝酸纤维素微孔膜表面疏水化改性,成功地用于膜蒸馏研究,大大扩展了疏水微孔膜的材料来源。实验结果表明,亲水膜表面改性得到的疏水膜,其膜蒸馏性能不低于疏水材料制成的膜,尤其是等离子体聚合法可以实现多种特殊单体在多孔的材料表面聚合,成为制备高性能疏水微孔膜的有效手段,为膜蒸馏的深入发展和实用化创造了有利条件。 相似文献
6.
7.
膜蒸馏是一种以膜为介质,利用传统蒸发工艺开发的新型膜分离技术。随着高分子材料行业的进步和制膜工艺的成熟,膜蒸馏技术取得了巨大的进展,在水处理领域拥有十分广阔的市场前景。膜蒸馏技术的核心是膜的通量和使用寿命,而性能优良的膜材料是膜蒸馏技术发展的关键。聚偏氟乙烯(PVDF)因具有成膜性能好、表面张力大、化学稳定性强等优点,在膜蒸馏技术应用研究中备受青睐。同时PVDF与其他聚合物具有良好的相容性,为膜的改性研究奠定了基础,极大地扩展了应用范围。本文介绍了膜蒸馏技术的工作原理及工艺特点以及PVDF膜材料的特点及改性方法,重点对PVDF膜蒸馏技术在水处理领域的应用进行了梳理和总结,讨论了该技术亟待研究和解决的问题,以期为该工艺技术的进一步发展提供科学支撑和理论依据。 相似文献
8.
9.
10.
TIPS法制备聚偏氟乙烯平板微孔膜及其表征 总被引:2,自引:0,他引:2
以邻苯二甲酸二甲酯(DMP)为稀释剂,采用热致相分离法(TIPS)制备了聚偏氟乙烯(PVDF)平板微孔膜。利用差示扫描量热仪分析了不同PVDF/DMP体系的结晶性能;通过测试纯水通量、孔隙率、泡点、平均孔径、拉伸强度等对膜进行了表征。结果表明:DMP含量增大,结晶温度向低温方向移动,膜拉伸强度降低,当DMP的质量分数为0.70时膜拉伸强度有明显拐点;PVDF/DMP体系冷却发生固-液相分离;PVDF含量增大,膜水通量、孔隙率、最大孔径和平均孔径均减小。 相似文献
11.
《Separation & Purification Reviews》2013,42(1):35-86
Abstract Membrane contactors represent an emerging technology in which the membrane is used as a tool for inter phase mass transfer operations: the membrane does not act as a selective barrier, but the separation is based on the phase equilibrium. In principle, all traditional stripping, scrubbing, absorption, evaporation, distillation, crystallization, emulsification, liquid‐liquid extraction, and mass transfer catalysis processes can be carried out according to this configuration. This review, specifically addressed to membrane distillation (MD), osmotic distillation (OD), and membrane crystallization (MCr), illustrates the fundamental concepts related to heat and mass transport phenomena through microporous membranes, appropriate membrane properties, and module design criteria. The most significant applications of these novel membrane operations, concerning pure/fresh water production, wastewater treatment, concentration of agro food solutions, and concentration/crystallization of organic and biological solutions, are also presented and discussed. 相似文献
12.
In the present work, poly(4-methyl-1-pentene) (TPX) was used to prepare hydrophobic microporous membranes, and the application of the prepared membranes to pervaporation and osmotic distillation was also investigated. The TPX/cyclohexane solution inclines to undergo solid-liquid demixing and form polymer particles at room temperature. The solid-liquid demixing is strongly related to the crystallization process. During membrane formation, the competition between solid-liquid demixing and polymer precipitation determines if particulate membranes can be prepared. By using suitable coagulant, such as propanol, the solid-liquid demixing process occurs before polymer precipitation, particulate TPX membranes with interconnected pores can thus be successfully fabricated. By adjusting the coagulation environment, the pore size of the porous TPX membrane can be tailored. Experiments were performed to evaluate the performance of the prepared membranes in pervaporation and osmotic distillation. The results indicate that the performance of the microporous TPX membranes prepared in the present work is comparable to the commercial PTFE membranes. 相似文献
13.
14.
《中国化学快报》2021,32(11):3298-3306
As an emerging thermal-driven membrane technology, membrane distillation (MD) has attracted immense attention for desalination and water purification. The membranes for MD generally have hydrophobic or superhydrophobic properties to enable vapor permeation without liquid passage (e.g., wetting). However, conventional MD membranes cannot undergo long term stable operations due to gradual wetting in practical applications where the feed solution often contains multiple low-surface tension contaminants (e.g., oil). Recently, omniphobic membranes repelling all sorts of liquids and typically having ultralow surface energy and re-entrant structures have been developed for robust MD to mitigate wetting and fouling. In this paper, we aim to provide a comprehensive review of recent progress on omniphobic membranes. Fundamentals, desirable properties, advantages and applications of omniphobic membranes are discussed. We also summarize the research efforts and methods to engineer omniphobic membranes. Finally, the challenges and future research directions on omniphobic membranes are discussed. 相似文献
15.
16.
Two kinds of polypropylene capillary membranes were used in the membrane distillation (MD). These membranes exhibited a similar morphology, but one of them has an additional low porosity layer on the internal surface of capillaries. The changes of membrane performance during MD process of tap water were investigated. The presence of low porosity layer (thickness below 1 μm) caused that the air permeability was reduced from 1.365 to 0.863 dm3/m2 s kPa, whereas the MD permeate flux was decreased only by 15%. A significantly larger decline of the flux was caused by CaCO3 deposit formed during distillation of tap water. This deposit was removed every 30–70 h by rinsing the modules with a 2–5 wt.% HCl. Unfortunately, a repetition of this operation several times resulted in a gradual decline of the maximum permeate flux (distilled water as a feed). However, the module efficiency with the membranes covered by a surface layer of low porosity was found to decreases twice as slowly. The investigations revealed that a low surface porosity does not limit the possibility of surface wetting of polypropylene membranes, but hindered the scale formation inside the pores. 相似文献
17.
利用静电纺丝技术,制备了不同的聚合物/TiO2杂化纳米纤维微孔膜,吸附液体电解质后形成聚合物/TiO2杂化纳米纤维微孔膜准固态电解质,应用于制备准固态染料敏化太阳能电池(DSSCs).测试了电纺聚合物纳米纤维微孔膜电解质的吸液率、孔隙率、离子电导率等参数,研究了纳米纤维微孔膜准固态电解质DSSCs的光伏性能.结果显示,TiO2的掺入可提高聚合物/TiO2杂化纳米纤维微孔膜对液态电解质的浸润扩散性能,从而提高纳米纤维微孔膜对液态电解质的吸附能力.组装的DSSCs的光电转换效率可达液态电解质的90%以上,并具有较好的长期工作稳定性. 相似文献
18.
Jian-hua Cao~a Bao-ku Zhu~b Dan-ying Zuo~b You-yi Xu~ 《高分子科学》2008,(1):13-21
Microporous poly(vinylidene fluoride-co-hexafluoropropylene)(PVDF-HFP)membranes following supercritical CO_2 induced phase separation process were prepared using four solvents.The solid electrolytes of PVDF-HFP were formed by microporous PVDF-HFP membranes filled and swollen by a liquid electrolyte.The effect of the solvents on the morphology and structure,electrolyte absorptions and lithium ionic conductivity of the activated membranes were investigated.It was approved that all the membrane had the simi... 相似文献