Reflection absorption infrared spectroscopy and temperature-programmed desorption studies of the adsorption and desorption of amorphous and crystalline water on a graphite surface

Reflection absorption infrared spectroscopy (RAIRS) and temperature-programmed desorption (TPD) have been used to perform a detailed investigation of the adsorption of water on highly oriented pyrolytic graphite (HOPG) at 90 K. RAIRS shows that water is physisorbed on HOPG at all coverages, as expected. Experiments at higher surface temperatures show marked changes in the O-H stretching region of the spectrum which can be assigned to the observation of the amorphous to crystalline ice phase transition. The infrared signature of both phases of solid water has been determined on HOPG and can be used to identify the phase of the ice. TPD spectra show the desorption of multilayers of crystalline ice. At high exposures a small bump appears in the TPD spectrum, on the low temperature side of the main peak, which is attributed to the amorphous to crystalline phase transition. At very low exposures of water, it is possible to distinguish the desorption of water from two- and three-dimensional islands and hence to determine the growth mode of water on the HOPG surface. Isothermal TPD studies have also been performed and show that the desorption of water does not obey perfect zero-order kinetics. Desorption orders, derived directly from the TPD spectra, confirm this observation. Desorption energies and preexponential factors have also been determined for this adsorption system.     

Reflection absorption infrared spectroscopy and temperature programmed desorption investigations of the interaction of methanol with a graphite surface

Reflection absorption infrared spectroscopy (RAIRS) and temperature programmed desorption (TPD) have been used to investigate the adsorption of methanol (CH(3)OH) on the highly oriented pyrolytic graphite (HOPG) surface. RAIRS shows that CH(3)OH is physisorbed at all exposures and that crystalline CH(3)OH can be formed, provided that the surface temperature and coverage are high enough. It is not possible to distinguish CH(3)OH that is closely associated with the HOPG surface from CH(3)OH adsorbed in multilayers using RAIRS. In contrast, TPD data show three peaks for the desorption of CH(3)OH. Initial adsorption leads to the observation of a peak assigned to the desorption of a monolayer. Subsequent adsorption leads to the formation of multilayers on the surface and two TPD peaks are observed which can be assigned to the desorption of multilayer CH(3)OH. The first of these shows a fractional order desorption, assigned to the presence of hydrogen bonding in the overlayer. The higher temperature multilayer desorption peak is only observed following very high exposures of CH(3)OH to the surface and can be assigned to the desorption of crystalline CH(3)OH.     

Adsorption energies, inter-adsorbate interactions, and the two binding sites within monolayer benzene on Ag(111)

The adsorption of monolayer and multilayer benzene on the Ag(111) surface was characterized using temperature programmed desorption (TPD). TPD spectra revealed two broad peaks at approximately 205 and approximately 150 K at submonolayer coverage and a sharper, multilayer peak at 140 K. Analysis of the coverage-dependent shape and shift of the two submonolayer peaks has resulted in their assignment to desorption from two different binding geometries on threefold-hollow sites with symmetries C(3v)(sigma d) and C(3v)(sigma v). The TPD peak analysis incorporated inter-adsorbate repulsive interaction that resulted from the local dipole moment at the adsorption site induced by the adsorbate-surface charge transfer bonding. The analysis has yielded desorption energies of 54.9 +/- 0.8 and 50.4 +/- 0.4 kJ/mol for the C(3v)(sigma d) and C(3v)(sigma v) configurations, respectively. The interface dipole and polarizability of the benzene-silver complex have been determined to be 5.4 +/- 1.8 D and 14 +/- 10 A3, respectively. Repulsive interactions in the monolayer were found to lower the desorption energy from the zero-coverage value by 14.8 kJ/mol. Leading edge analysis of the multilayer peak yielded a desorption energy of 40.9 +/- 0.7 kJ/mol.     

Thermally induced mixing of water dominated interstellar ices

Despite considerable attention in the literature being given to the desorption behaviour of smaller volatiles, the thermal properties of complex organics, such as ethanol (C(2)H(5)OH), which are predicted to be formed within interstellar ices, have yet to be characterized. With this in mind, reflection absorption infrared spectroscopy (RAIRS) and temperature programmed desorption (TPD) have been used to probe the adsorption and desorption of C(2)H(5)OH deposited on top of water (H(2)O) films of various thicknesses grown on highly oriented pyrolytic graphite (HOPG) at 98 K. Unlike many other molecules detected within interstellar ices, C(2)H(5)OH has a comparable sublimation temperature to H(2)O and therefore gives rise to a complicated desorption profile. RAIRS and TPD show that C(2)H(5)OH is incorporated into the underlying ASW film during heating, due to a morphology change in both the C(2)H(5)OH and H(2)O ices. Desorption peaks assigned to C(2)H(5)OH co-desorption with amorphous, crystalline (CI) and hexagonal H(2)O-ice phases, in addition to C(2)H(5)OH multilayer desorption are observed in the TPD. When C(2)H(5)OH is deposited beneath ASW films, or is co-deposited as a mixture with H(2)O, complete co-desorption is observed, providing further evidence of thermally induced mixing between the ices. C(2)H(5)OH is also shown to modify the desorption of H(2)O at the ASW-CI phase transition. This behaviour has not been previously reported for more commonly studied volatiles found within astrophysical ices. These results are consistent with astronomical observations, which suggest that gas-phase C(2)H(5)OH is localized in hotter regions of the ISM, such as hot cores.     

Ethanol decomposition: C--C cleavage selectivity on Rh(111).

Ethanol adsorption, desorption and decomposition on Rh(111) have been studied by X-ray photoelectron spectroscopy and tem-perature-programmed desorption experiments. The evolution of the C is and O is core level spectra was monitored as a function of ethanol exposure and surface temperature. Ethanol adsorption at 90 K results in two nonequivalent ethanol-adsorbed species at low surface coverage, while a third species--related to multilayer formation--appears after longer exposures. Upon surface annealing, ethanol undergoes both desorption and dissociation, thus creating intermediate surface species which further decompose to hydrogen, carbon monoxide and atomic carbon. Our results clearly show that C--C bond cleavage is the preferential dissociation channel, while C--O bond scission is not observed. Calculations performed within the framework of the unity bond index-quadratic exponent potential model, have been used to test and compare different competing dissociation channels, providing an estimate of adsorption energies and dissociation barriers.     

Adsorption and desorption of HCl on Pt(111)

The adsorption and desorption of HCl on Pt(111) is investigated by temperature programmed desorption, infrared reflection absorption spectroscopy, and low energy electron diffraction. Five peaks are identified in the desorption spectra prior to the onset of multilayer desorption. At low coverage ( < 0.25 monolayers (ML)), desorption peaks at approximately 135 and 200 K are observed and assigned to recombinative desorption of dissociated HCl. At higher coverages, desorption peaks at 70, 77, and 84 K are observed. These peaks are assigned to the desorption of molecularly adsorbed HCl. The infrared spectra are in agreement with these assignments and show that HCl deposited at 20 K is amorphous but crystallizes when heated above 60 K. Kinetic analysis of the desorption spectra reveals a strong repulsive coverage dependence for the desorption energy of the low coverage features ( < 0.25 ML). The diffraction data indicate that at low temperature the adsorbed HCl clusters into ordered islands with a (3 x 3) structure and a local coverage of 4/9 with respect to the Pt(111) substrate.     

Crystallization kinetics and excess free energy of H2O and D2O nanoscale films of amorphous solid water

Temperature-programmed desorption (TPD) and reflection absorption infrared spectroscopy (RAIRS) are used to investigate the crystallization kinetics and measure the excess free energy of metastable amorphous solid water films (ASW) of H(2)O and D(2)O grown using molecular beams. The desorption rates from the amorphous and crystalline phases of ASW are distinct, and as such, crystallization manifests can be observed in the TPD spectrum. The crystallization kinetics were studied by varying the TPD heating rate from 0.001 to 3 K/s. A coupled desorption-crystallization kinetic model accurately simulates the desorption spectra and accurately predicts the observed temperature shifts in the crystallization. Isothermal crystallization studies using RAIRS are in agreement with the TPD results. Furthermore, highly sensitive measurements of the desorption rates were used to determine the excess free energy of ASW near 150 K. The excess entropy obtained from these data is consistent with there being a thermodynamic continuity between ASW and supercooled liquid water.     

Adsorption of n-hexane in zeolite-5A: a temperature-programmed desorption and IR-spectroscopic study

The adsorption and desorption of n-hexane over Zeolite-5A has been investigated as a function of loading using simultaneous Fourier transform infrared (FTIR)-temperature-programmed desorption (TPD) measurements. The TPD profiles show a second peak developing at lower temperatures when loading exceeds 16 hexane molecules per Zeolite-5A unit cell or two molecules per alpha-cavity of the Zeolite-5A structure. The infrared spectra rule out two types of adsorption sites as the origin of the two peaks in the TPD. Changes in the conformation of the adsorbed hexane as a function of loading and temperature were followed by monitoring the position of the methylene stretching modes in the infrared spectra. With increasing loading, the adsorbed hexane adopts a stretched trans conformation. These changes occur at loading levels below 12 hexane molecules per Zeolite-5A unit cell. No change is observed above this loading, ruling out any conformational change at loadings where the second peak is seen in the TPD. The second peak in the TPD arises, therefore, from a combination of steric repulsion and loss of translational entropy.     

Zn adsorption on Pd(111): ZnO and PdZn alloy formation

The adsorption and thermal desorption of Zn and ZnO on Pd(111) was studied in the temperature range between 300 and 1300 K with TDS, LEED, and CO adsorption measurements. At temperatures below 400 K, multilayer growth of Zn metal on the Pd(111) surface takes place. At a coverage of 0.75 ML of Zn, a p(2 x 2)-3Zn LEED structure is observed. Increasing the coverage to 3 ML results in a (1 x 1) LEED pattern arising from an ordered Zn multilayer on Pd(111). Thermal desorption of the Zn multilayer state leads to two distinct Zn desorption peaks: a low-temperature desorption peak (400-650 K) arising from upper Zn layers and a second peak (800-1300 K) originating from the residual 1 ML Zn overlayer, which is more strongly bound to the Pd(111) surface and blocks CO adsorption completely. Above 650 K, this Zn adlayer diffuses into the subsurface region and the surface is depleted in Zn, as can be deduced from an increased amount of CO adsorption sites. Deposition of >3 ML of Zn at 750 K leads to the formation of a well-ordered Pd-Zn alloy exhibiting a (6 x 4 square root 3/3)rect. LEED structure. CO adsorption measurements on this surface alloy indicate a high Pd surface concentration and a strong reduction of the CO adsorption energy. Deposition of Zn at T > 373 K in 10(-6) mbar of O2 leads to the formation of an epitaxial (6 x 6) ZnO overlayer on Pd(111). Dissociative desorption of ZnO from this overlayer occurs quantitatively both with respect to Zn and O2 above 750 K, providing a reliable calibration for both ZnO, Zn, and oxygen coverage.     

Atomic hydrogen interaction with Ru(1010)

The interaction of atomic hydrogen with clean and deuterium precovered Ru(1010) was studied by means of temperature-programmed desorption (TPD) spectroscopy. Compared to molecular hydrogen experiments, after exposure of the clean surface to gas-phase atomic hydrogen at 90 K, two additional peaks grow in the desorption spectra at 115 and 150 K. The surface saturation coverage, determined by equilibrium between abstraction and adsorption reactions, is 2.5 monolayers. Preadsorbed deuterium abstraction experiments with gas-phase atomic hydrogen show that a pure Eley-Rideal mechanism is not involved in the process, while a hot atom (HA) kinetics describes well the reaction. By least-squares fitting of the experimental data, a simplified HA kinetic model yields an abstraction cross section value of 0.5 +/- 0.2 angstroms2. The atomic hydrogen interaction with an oxygen precovered surface was also studied by means of both TPD and x-ray photoelectron spectroscopy: oxygen hydrogenation and water production take place already at very low temperature (90 K).     

Water adsorption, desorption, and clustering on FeO(111)

The adsorption of water on FeO(111) is investigated using temperature programmed desorption (TPD) and infrared reflection absorption spectroscopy (IRAS). Well-ordered 2 ML thick FeO(111) films are grown epitaxially on a Pt(111) substrate. Water adsorbs molecularly on FeO(111) and desorbs with a well resolved monolayer peak. IRAS measurements as a function of coverage are performed for water deposited at 30 and 135 K. For all coverages (0.2 ML and greater), the adsorbed water exhibits significant hydrogen bonding. Differences in IRAS spectra for water adsorbed at 30 and 135 K are subtle but suggest that water adsorbed at 135 K is well ordered. Monolayer nitrogen TPD spectra from water covered FeO(111) surfaces are used to investigate the clustering of the water as a function of deposition or annealing temperature. Temperature dependent water overlayer structures result from differences in water diffusion rates on bare FeO(111) and on water adsorbed on FeO(111). Features in the nitrogen TPD spectra allow the monolayer wetting and 2-dimensional (2D) ordering of water on FeO(111) to be followed. Voids in a partially disordered first water layer exist for water deposited below 120 K and ordered 2D islands are found when depositing water above 120 K.     

Kinetics and dynamics in physisorption of CH3Cl on HOPG: surface temperature and molecular orientation dependence

We report a study of kinetics and dynamics in physisorption of CH(3)Cl on a highly-oriented pyrolytic graphite (HOPG). Thermal energy atom scattering (TEAS) was used to probe the kinetics of thermal CH(3)Cl adsorption on HOPG during the coverage evolution. The desorption energy of CH(3)Cl on HOPG changes from 0.25 to 0.30 eV with increasing surface coverage, suggesting the attractive interaction between CH(3)Cl molecules on the surface. On the other hand, the oriented molecular beam scattering was used to monitor the dynamical interaction of CH(3)Cl with HOPG at zero coverage, demonstrating that the CH(3)Cl scattering intensity depends on the molecular orientation of the incident CH(3)Cl. The observed steric preference is not sensitive to the surface temperature. These results suggest that the moderate anisotropy in the interaction potential induces the molecular-orientation dependence of energy dissipation during the transient trapping into the physisorption well.     

Reactions of ammonia on stoichiometric and reduced TiO(2)(001) single crystal surfaces

The reaction of NH(3) on the surface of the 011-faceted structure of the TiO(2)(001) single crystal is studied and compared to that on the O-defected surface. Temperature-programmed desorption (TPD) conducted after NH(3) adsorption at 300 K shows only molecular desorption at 340 K. Modeling of TPD signals as a function of surface coverage indicated that the activation energy, E(d), and pre-exponential factor, v(eff), decrease with increasing coverage. Near zero surface coverage, E(d) was found to be equal to 92 kJ/mol and v(eff) to be close to 10(13) /s. Both parameters decreased to approximately 52 kJ/mol and approximately 10(7) /s at saturation coverage. The decrease is due to a repulsive interaction of adsorbed NH(3) molecules on the surface. Computing of the TPD results show that saturation is obtained at 1/2 monolayer coverage (referred to Ti atoms). Both the amount and shape of NH(3) peak change on the reduced (Ar(+)-sputtered) surfaces. The desorption peak at 340 K is considerably attenuated on mildly reduced surfaces (TiO( approximately )(1.9)) and has totally disappeared on the heavily reduced surfaces (TiO(1.6)(-)(1.7)), where the main desorption peak is found at 440 K. This 440-K desorption is most likely due to NH(x) + H recombination resulting from ammonia dissociation upon adsorption on Ti atoms in low oxidation states.     

Benchmarking the accuracy of coverage-dependent models: adsorption and desorption of benzene on Pt (1 1 1) and Pt3Sn (1 1 1) from first principles

Bimetallic catalysts have demonstrated properties favorable for upgrading biofuel through catalytic hydrodeoxygenation. However, the design and optimization of such bimetallic catalysts requires the ability to construct accurate, predictive models of these systems. To generate a model that predicts the kinetic behavior of benzene adsorbed on Pt (1 1 1) and a Pt₃Sn (1 1 1) surface alloy (Pt₃Sn (1 1 1)), the adsorption of benzene was studied for a wide range of benzene coverages on both surfaces using density functional theory (DFT) calculations. The adsorption energy of benzene was found to correlate linearly with benzene coverage on Pt (1 1 1) and Pt₃Sn (1 1 1); both surfaces exhibited net repulsive lateral interactions. Through an analysis of the d-band properties of the metal surface, it was determined that the coverage dependence is a consequence of the electronic interactions between benzene and the surface. The linear coverage dependence of the adsorption energy allowed us to quantify the influence of the lateral interactions on the heat of adsorption and temperature programmed desorption (TPD) spectra using a mean-field model. A comparison of our simulated TPD to experiment showed that this mean-field model adequately reproduces the desorption behavior of benzene on Pt (1 1 1) and Pt₃Sn (1 1 1). In particular, the TPD correctly exhibits a broadening desorption peak as the initial coverage of benzene increases on Pt (1 1 1) and a low temperature desorption peak on Pt₃Sn (1 1 1). However, due to the sensitivity of the TPD peak temperature to the desorption energy, precise alignment of experimental and theoretical TPD spectra demands an accurate calculation of the adsorption energy. Therefore, an analysis of the effect of the exchange-correlation functional on TPD modeling is presented. Through this work, we show the necessity of incorporating lateral interactions into theoretical models in order to correctly predict experimental behavior.     

Physisorption of N2, O2, and CO on fully oxidized TiO2(110)

Physisorption of N(2), O(2), and CO was studied on fully oxidized TiO(2)(110) using beam reflection and temperature-programmed desorption (TPD) techniques. Sticking coefficients for all three molecules are nearly equal (0.75 +/- 0.05) and approximately independent of coverage suggesting that adsorption occurs via a precursor-mediated mechanism. Excluding multilayer coverages, the TPD spectra for all three adsorbates exhibit three distinct coverage regimes that can be interpreted in accord with previous theoretical studies of N(2) adsorption. At low coverages (0-0.5 N(2)/Ti(4+)), N(2) molecules bind head-on to five-coordinated Ti(4+) ions. The adsorption occurs preferentially on the Ti(4+) sites that do not have neighboring adsorbates. This arrangement minimizes the repulsive interactions between the adsorbed molecules along the Ti(4+) rows resulting in a relatively small shift of the TPD peak (105 --> 90 K) with increasing coverage. At higher N(2) coverages (0.5-1.0 N(2)/Ti(4+)) the nearest-neighbor Ti(4+) sites become occupied. The close proximity of the adsorbates results in strong repulsion thus giving rise to a significant shift of the TPD leading edges (90 --> 45 K) with increasing coverage. For N(2)/Ti(4+) > 1, an additional low-temperature peak (approximately 43 K) is present and is ascribed to N(2) adsorption on bridge-bonded oxygen rows. The results for O(2) and CO are qualitatively similar. The repulsive adsorbate-adsorbate interactions are largest for CO, most likely due to alignment of CO dipole moments. The coverage-dependent binding energies of O(2), N(2), and CO are determined by inverting TPD profiles.     

Probing the interaction of hydrogen chloride with low-temperature water ice surfaces using thermal and electron-stimulated desorption

The interaction and autoionization of HCl on low-temperature (80-140 K) water ice surfaces has been studied using low-energy (5-250 eV) electron-stimulated desorption (ESD) and temperature programmed desorption (TPD). There is a reduction of H(+) and H(2)(+) and a concomitant increase in H(+)(H(2)O)(n=1-7) ESD yields due to the presence of submonolayer quantities of HCl. These changes are consistent with HCl induced reduction of dangling bonds required for H(+) and H(2)(+) ESD and increased hole localization necessary for H(+)(H(2)O)(n=1-7) ESD. For low coverages, this can involve nonactivated autoionization of HCl, even at temperatures as low as 80 K; well below those typical of polar stratospheric cloud particles. The uptake and autoionization of HCl is supported by TPD studies which show that for HCl doses ≤0.5 ± 0.2 ML (ML = monolayer) at 110 K, desorption of HCl begins at 115 K and peaks at 180 K. The former is associated with adsorption of a small amount of molecular HCl and is strongly dependent on the annealing history of the ice. The latter peak at 180 K is commensurate with desorption of HCl via recombinative desorption of solvated separated ion pairs. The activation energy for second-order desorption of HCl initially in the ionized state is 43 ± 2 kJ/mol. This is close to the zero-order activation energy for ice desorption.     

Acetone and water on TiO2(110): H/D exchange

Isotopic H/D exchange between coadsorbed acetone and water on the TiO2(110) surface was examined using temperature programmed desorption (TPD) as a function of coverage and two surface pretreatments (O2 oxidation and mild vacuum reduction). Coadsorbed acetone and water interact repulsively on reduced TiO2(110) on the basis of results from the companion paper to this study, with water exerting a greater influence in destabilizing acetone and acetone having only a nominal influence on water. Despite the repulsive interaction between these coadsorbates, about 0.02 monolayers (ML) of a 1 ML d6-acetone on the reduced surface (vacuum annealed at 850 K to a surface oxygen vacancy population of 7%) exhibits H/D exchange with coadsorbed water, with the exchange occurring exclusively in the high-temperature region of the d6-acetone TPD spectrum at approximately 340 K. The effect was confirmed with combinations of d0-acetone and D2O. The extent of exchange decreased on the reduced surface for water coverages above approximately 0.3 ML due to the ability of water to displace coadsorbed acetone from first layer sites to the multilayer. In contrast, the extent of exchange increased by a factor of 3 when surface oxygen vacancies were pre-oxidized with O2 prior to coadsorption. In this case, there was no evidence for the negative influence of high water coverages on the extent of H/D exchange. Comparison of the TPD spectra from the exchange products (either d1- or d5-acetone depending on the coadsorption pairing) suggests that, in addition to the 340 K exchange process seen on the reduced surface, a second exchange process was observed on the oxidized surface at approximately 390 K. In both cases (oxidized and reduced), desorption of the H/D exchange products appeared to be reaction limited and to involve the influence of OH/OD groups (or water formed during recombinative desorption of OH/OD groups) instead of molecularly adsorbed water. The 340 K exchange process is assigned to reaction at step sites, and the 390 K exchange process is attributed to the influence of oxygen adatoms deposited during surface oxidation. The H/D exchange mechanism likely involves an enolate or propenol surface intermediate formed transiently during the desorption of oxygen-stabilized acetone molecules.     

Probing the crossover in CO desorption from single crystal to nanoparticulate Ru model catalysts

Using model catalysts, we demonstrate that CO desorption from Ru surfaces can be switched from that typical of single crystal surfaces to one more characteristic of supported nanoparticles. First, the CO desorption behaviour from Ru nanoparticles supported on highly oriented pyrolytic graphite was studied. Both mass-selected and thermally evaporated nanoparticles were deposited. TPD spectra from the mass-selected nanoparticles exhibit a desorption peak located around 410 K with a broad shoulder extending from around 480 K to 600 K, while spectra obtained from thermally evaporated nanoparticles exhibit a single broad feature from ～350 K to ～450 K. A room temperature deposited 50 ? thick Ru film displays a characteristic nanoparticle-like spectrum with a broad desorption feature at ～420 K and a shoulder extending from ～450 K to ～600 K. Subsequent annealing of this film at 900 K produced a polycrystalline morphology of flat Ru(001) terraces separated by monatomic steps. The CO desorption spectrum from this surface resembles that obtained on single crystal Ru(001) with two large desorption features located at 390 K and 450 K due to molecular desorption from terrace sites, and a much smaller peak at ～530 K due to desorption of dissociatively adsorbed CO at step sites. In a second experiment, ion sputtering was used to create surface defects on a Ru(0 1 54) single crystal surface. A gradual shift away from the desorption spectrum typical of a Ru(001) surface towards one resembling desorption from supported Ru nanoparticles was observed with increasing sputter time.     

n-alkanes on MgO(100). I. Coverage-dependent desorption kinetics of n-butane

High-quality temperature-programmed desorption (TPD) measurements of n-butane from MgO(100) have been made for a large number of initial butane coverages (0-3.70 ML, ML-monolayers) and a wide range of heating ramp rates (0.3-10 K/s). We present a TPD analysis technique which allows the coverage-dependent desorption energy to be accurately determined by mathematical inversion of a TPD spectrum, assuming only that the preexponential factor (prefactor) is coverage independent. A variational method is used to determine the prefactor that minimizes the difference between a set of simulated TPD spectra and corresponding experimental data. The best fit for butane desorption from MgO is obtained with a prefactor of 10(15.7+/-1.6) s(-1). The desorption energy is 34.9+/-3.4 kJ/mol at 0.5-ML coverage, and varies with coverage approximately as Ed(theta)=34.5+0.566theta+8.37 exp(-theta/0.101). Simulations based on these results can accurately reproduce TPD experiments for submonolayer initial coverages over a wide range of heating ramp rates (0.3-10 K/s). Advantages and limitations of this method are discussed.