助剂对Ru/CeO2催化剂的表面性质及氨合成性能的影响

以KF、KNO₃、Ba(NO₃)₂、CsNO₃为助剂前驱体,CeO₂为载体采用氧化还原共沉淀法制备了一系列无氯负载型钌催化剂,考察了助剂种类和助剂含量及单双助剂对Ru/CeO₂氨合成活性的影响,并采用N₂物理吸附、CO脉冲吸附、XRD、XRF等表征手段,考察了助剂对Ru/CeO₂催化剂比表面积、孔分布、钌分散度的影响。结果表明,F与碱金属、碱土金属一样可以促进Ru/CeO₂催化剂的氨合成活性,四种单助剂中以CsNO₃前驱体为助剂的促进效果最好,而对于双助剂Ba+Cs的促进效果最明显,在400℃,10 MPa,10 000 h^-1反应条件下,出口氨浓度达到了13.3%。加入助剂后使各Ru/CeO₂催化剂表面结构发生改变,但是催化剂的结构因素对氨合成活性的影响不明显,电子效应才是影响催化剂氨合成活性的主要因素。     

助剂对于Cu/ZnO催化剂结构特征及催化草酸二甲酯加氢合成乙二醇反应性能的影响

采用共沉淀法合成了掺杂不同助剂的Cu-M/ZnO (Cu:ZnO 物质的量比=5∶4,M=Zr⁴⁺、Al³⁺、Mg²⁺，助剂含量为4.0%)用于催化草酸二甲酯(Dimethyl oxalate, DMO)选择加氢反应催化剂。结果表明，微量掺杂Al³⁺、Mg²⁺助剂嵌入于ZnO 晶相，Zr⁴⁺助剂嵌入Cu晶相均能显著促进Cu/ZnO 催化剂中铜分散；其中，Mg²⁺助剂能够有效增强Cu、ZnO 物相间相互作用，Zr⁴⁺助剂能够有效增强Cu、ZrO₂物相间相互作用。催化DMO加氢选择加氢反应，Cu/ZnO 催化剂乙二醇(Ethylene glycol,EG)收率仅为75.0%,Cu-Al/ZnO 、Cu-Zr/ZnO 和Cu-Mg/ZnO 催化剂的EG收率分别为90.0%、85.0%、95.0%。相比Cu/ZnO 和Cu-Al/ZnO 催化剂催化DMO选择加氢反应易于失活，Cu-Zr/ZnO 和C...     

12-钨磷酸及其盐的酸性与催化性能的研究

红外法研究结果表明12-钨磷酸Fe³⁺、Mg²⁺和Na⁺盐都具有L酸点和B酸点。用Benesi法测得10种12-钨磷酸盐的酸强度顺序为(Al³⁺、Fe³⁺、La³⁺、Cu²⁺、Cd²⁺>Zn²⁺>(Ca²⁺、Mg²⁺>(Na⁺、Li⁺,其酸量与抗衡阳离子的离子势和电负性大体成线性关系。还看出酸量与所含结晶水量有关。催化剂的酸量与其对异丙醇脱水反应和丁烯-1异构化反应的催化活性的关系表现出不同的特征,这可用“体相型”和“表面型”催化作用的不同特点来解释。     

X-射线吸收谱原位表征Cu-Zn/SiO2催化剂Cu价态

铜基催化剂的价态组成与制备方法、还原温度有关,也是决定其催化性能的关键因素.本文对比研究Cu-Zn/SiO₂和Cu/SiO₂催化剂前驱体在不同还原温度下的价态组成及其醋酸甲酯加氢性能.采用同步辐射X射线吸收谱原位表征催化剂前驱体的Cu K边的X射线近边吸收谱（XANES）,通过线性组合分析方法（LCF）拟合XANES吸收谱得到了催化剂前驱体在不同还原温度下氧化态（Cu²⁺、Cu⁺）和金属态（Cu⁰）的组分含量.结果表明：（1）采用蒸氨法添加Zn制备的Cu-Zn/SiO₂催化剂前驱体铜组分还原度高;（2）催化剂前驱体在还原过程中Cu⁺主要存在于低温还原阶段（<250℃）,且Cu⁰+Cu⁺含量较低（≤ 40%）;（3）金属态铜是醋酸酯加氢反应的活性中心.     

磷酸氨中和制备磷铵过程中稀土的选择性回收

以含稀土磷酸为原料,系统研究了Ce³⁺和Fe²⁺/Fe³⁺,Ca²⁺,Mg²⁺,Al³⁺的在氨中和制备磷铵过程中的离子迁移行为差异,并考察了不同条件下稀土沉淀物的过滤性能。结果表明,磷酸氨中和pH约为2时,稀土(Ce³⁺)的沉淀率及其与各杂质的分离系数较优。含稀土磷酸模拟料液氨水中和实验中控制pH=2时,各离子沉淀率分别为Ce³⁺99.58%,Fe³⁺8.66%,Ca²⁺13.80%,Mg²⁺11.90%,Al³⁺4.38%,沉淀物中Ce³⁺的质量分数约为43%。含稀土磷酸氨中和过程中pH=2左右稀土优先沉淀且沉淀物可以实现有效过滤。随温度的升高,沉淀料浆的过滤速率从3.39 mL·min^-1提高至4.17 mL·min^-1。     

室温下快速合成超小Fe3+掺杂BiF3纳米粒子

室温下快速合成了Fe³⁺掺杂的BiF₃超小纳米粒子,只需要反应1 min,较小的Fe³⁺离子即可替代BiF₃晶格中较大的Bi³⁺离子.随着Fe³⁺掺杂量的增加,BiF₃：Fe³⁺纳米粒子的粒径不断减小,当Fe³⁺的掺杂量达到0.119时,可以得到尺寸约为6.9 nm的Fe³⁺掺杂BiF₃超小纳米粒子.此外,Fe³⁺离子的掺杂使BiF₃：Fe³⁺-x样品的能带结构发生了显著变化.制备的Fe³⁺掺杂BiF₃超小纳米粒子在光催化剂和荧光材料方面具有潜在的应用价值.     

高硫化氢合成气制甲硫醇新型钼基催化剂研究

研究了一系列负载型钼基催化剂催化含高硫化氢合成气制甲硫醇的性能,用XPS和ESR对其进行表征.活性测试显示,钾促进的钼基催化剂催化的反应产物中甲硫醇成为主导产物.几种钼基催化剂合成甲硫醇的活性大小顺序:K₂MoO₄/CoO/SiO₂>K₂MoO₄/SiO₂>MoO₃/K₂CO₃/SiO₂>K₂MoS₄/SiO₂>MoS₂/K₂CO₃/SiO₂.ESR表征显示,反应后的催化剂可以检测到"oxo-Mo(V) "和"thio-Mo(V)"物种.XPS表征显示反应后催化剂中的Mo包含着Mo⁴⁺,Mo⁵⁺和Mo⁶⁺,S包含着S^2-,(S-S)^2-和S⁶⁺三种价态.添加CoO后,"oxo-Mo(V)"含量减少,而"thio-Mo(V)"含量增加,(S-S)^2-物种的生成得到抑制,S^2-物种的量增多.(Mo⁴⁺+Mo⁵⁺)/Mo⁶⁺峰强度比为0.75以及S^2-/(S-S)^2-接近1有利于甲硫醇的生成.本文提出甲硫醇的合成与"Mo-S-K"相关联的反应机理.     

喹啉取代的氟硼二吡咯染料类三价铁离子荧光探针的合成与性能

设计合成了喹啉取代的氟硼二吡咯荧光探针(BHQ),并用核磁共振波谱仪(NMR)和高分辨质谱仪(HRMS)等技术手段对合成的化合物进行了表征。 结果表明,在水溶液中,探针BHQ在Fe³⁺存在下具有良好的荧光增强识别效果,对 Fe³⁺ 具有响应快、较好的灵敏度和选择性特点,而其它金属离子的存在不干扰 Fe³⁺ 的检测。 探针BHQ与Fe³⁺以摩尔比1:1的方式进行配位。 该探针在Fe³⁺的检测方面具有潜在的应用价值。     

双金属氰化络合物及其催化的聚合反应

本文综述了双金属氰化络合物及其催化的环氧化物参与的聚合反应研究。双金属氰化络合物是由其内界金属M^Ⅱ通过氰基与外界金属M^Ⅰ连接形成的含 M^Ⅱ-C≡N-M^Ⅰ 桥键的三维网络状无机高分子(M^Ⅰ一般为Zn²⁺、Fe²⁺、Co²⁺和Ni²⁺等二价金属离子,M^Ⅱ一般为Fe²⁺、Fe³⁺、Co²⁺、Co³⁺和Ni²⁺等过渡金属离子)。外界金属M^Ⅰ一般被认为是催化反应的活性中心金属。该类催化剂早期被用于催化环氧化物开环聚合,并逐步发展成为合成中高分子量、低不饱和度聚醚多元醇的极高效催化剂。近年来该类催化剂被用来催化环氧化物/环状酸酐共聚、环氧化物/CX₂(X≡O,S)共聚和环氧化物/环状酸酐/CO₂三元共聚反应合成聚酯、聚碳酸酯、聚(醚-碳酸酯)、聚硫代碳酸酯和聚(碳酸酯-酯)等具有生物降解性的聚合物。尤其对氧化环己烯(CHO)与CO₂(或酸酐)共聚,锌-钴双金属氰化络合物表现出了极高的催化活性和选择性。结合本研究组十多年的研究结果,本文讨论了双金属氰化络合物催化活性中心的可能结构和催化机理,提出了双金属氰化络合物催化聚合的共性难题和解决这些问题的方向。     

金属离子掺杂二氧化钛及水体光催化脱氮研究

采用溶胶-凝胶法制备了掺杂Ce³⁺、La³⁺、Ag⁺、Fe³⁺的TiO₂光催化剂,以考察其薄膜和粉体形式对水中无机氮的光催化去除效果和活性.用所制备的催化剂对含氨氮-亚硝酸氮的混合液进行了光催化脱氮研究.本文利用UV-Vis吸收光谱、XRD和TEM对催化剂进行了表征.同时,对影响TiO₂光催化效率的因素:如掺杂金属离子的种类、浓度、涂膜层数、反应液中有无Fe²⁺、不锈钢和玻璃载体、反应器的构型等进行了探讨,并对今后的研究进行展望.经过2 h紫外光照射反应,实验最佳脱氮效果:金属离子掺杂TiO₂薄膜型催化剂总氮去除率在30%左右,金属离子掺杂粉末型催化剂光催化最高总氮去除率可达41.7%.     

Relationship between temperature-programmed reduction profile and activity of modified ferrite-based catalysts for WGS reaction

A series of modified ferrites were prepared by doping iron oxide with various transition/non-transition/inner-transition metal ions [M = Cr, Mn, Co, Ni, Cu, Zn and Ce] in situ during synthesis. All the modified ferrites thus obtained exhibit remarkably high surface areas, greater than that of pure iron oxide (Fe₂O₃) sample. The efficacy of the dopant ions in modifying the resultant specific surface area, could be directly related to variations in the rate of crystal growth. The nature and concentration of the foreign cations present in the system govern this variation. Interestingly all the modified ferrites, exhibit a narrow pore size distribution in the range of 4.9–25 nm. XRD analysis revealed the existence of hematite (Fe₂O₃) phase in all the as-prepared samples. The X-ray diffraction experiments performed on activated catalysts, confirmed the existence of magnetite (Fe₃O₄) phase with a nominal composition of Fe_2.73M_0.27O₄. These inverse or mixed spinels with general formula A_(1−δ)B_δ[A_δB_(2−δ)]O₄, possess highly facile Fe³⁺  Fe²⁺ redox couple, the degree of facileness depends on the extent of synergistic interaction between iron and the other substitutent metal ion. The rapid electron hopping between Fe³⁺  Fe²⁺ in the Fe₃O₄ lattice system is essential to catalyze WGS reaction. From TPR it was observed that, incorporation of metal cations into the hematite (-Fe₂O₃) crystal structure alters the reducibility of the hematite particles, which in turn depends on the nature of the incorporated metal cation. A plausible explanation for the WGS activity over various modified ferrites has been attempted with the help of TPR analysis.     

SO_4~(2-)功能化处理对Fe_2O_3催化剂上氨选择性催化还原NO_x性能的促进机理研究

采用沉淀法制备了Fe(OH)_3和Fe_2O_3。通过硫酸化处理得到SO_4~(2-)/Fe(OH)_3和SO_4~(2-)/Fe_2O_3两种催化剂,并将其应用于氨选择性催化还原NO_x(NH_3-SCR)反应,研究了SO_4~(2-)功能化处理对Fe_2O_3催化剂上NH_3-SCR脱硝性能的促进机理。结果表明,与纯的Fe_2O_3相比,硫酸化处理得到的催化剂上SCR活性得到显著提升;其中,SO_4~(2-)/Fe(OH)_3表现出更加优异的催化性能,在250-450℃时NO_x转化率高于80%,且具有优异的稳定性和抗H_2O+SO_2性能。XRD、Raman、TG、FT-IR、H_2-TPR、NH_3-TPD和in situ DRIFTS等表征结果显示,硫酸功能化处理能抑制Fe_2O_3的晶粒生长,同时SO_4~(2-)与Fe~(3+)结合形成硫酸盐复合物,提高了催化剂表面酸性位点的数量和酸强度,抑制了Fe_2O_3上的氨氧化反应,从而提高了其脱硝催化性能。     

Effective Removal of Tetracycline by Using Biochar Supported Fe3O4 as a UV-Fenton Catalyst

Novel Fe3O4-decorate hierarchical porous carbon skeleton derived from maize straw(Fe3O4@MSC)was synthesized by a facile co-precipitation process and a calcination process,which was developed as a UV assisted heterogeneous Fenton-like catalyst.The as-synthesized catalysts were characterized via X-ray powder diffraction(XRD), scanning electron microscope(SEM),transmission electron microscope(TEM),Brunauer-Emmet-Teller(BET)and vibrating sample magnetometer(VSM)at room temperature.The morphology and structure analysis revealed that the as-prepared Fe3O4@MSC retained the original pore morphology of the maize straw material.The non-uniform poly- hedral Fe3O4 grew on the whole surface of the MSC,which reduced the aggragation of Fe3O4 and provided more active sites to strengthen the UV-assisted Fenton-like reaction.As a result,the tetracycline(TC)degradation efficiency after 40 min reaction and total organic carbon(TOC)removal efficiency after 2 h reaction of Fe3O4@MSC catalyzing UV-Fenton system reached 99.2%and 72.1%,respectively,which were more substantial than those of Fe3O4@MSC/H2O2(31.5%and 2%),UV/H2O2 system(68%and 23.4%)and UV/Fe3O4/H2O2(80% and 37.5%).The electron spin resonance(ESR)results showed that the ·OH played an important role in the catalytic reaction.A possible degradation pathway of TC was proposed on the basis of the identified intermediates.Overall,the UV assisted heterogeneous Fenton-like process in Fe3O4@MSC improved the cycle of Fe^3+/Fe^2+ and activated the interfacial catalytic site,which eventually realized the enhancement of degradation and mineralization to tetracycline.     

Facial Preparation of Magnetic Lipase as Efficient Biocatalyst to Resolute Esters Enantioselectively

Magnetic lipase was prepared by a facial and cost-effective method. Lipase from Pseudomonase cepacia was covalently linked to Fe₃O₄ nanoparticles, which were produced by co-precipitating Fe²⁺ and Fe³⁺ ions in ammonia solution and subsequent coating with 3,4-dihydroxylaldehyde. Magnetic Fe₃O₄ nanoparticles modified with 3,4-dihydroxylaldehyde bonded lipase efficiently(47 mg/g). The resulting magnetic-lipase is active(0.68 μmol·min^-1·mg^-1) and enantioselective(e.e. of the product >98%) in the hydrolysis of racemic 1-phenylethyl acetate. Furthermore, as a heterogeneous catalyst, the magnetic-lipase can be magnetically recycled, and a retained activity of 48% was obtained even after 6 cycles.     

Inhibition of photooxidation of iron(II) by some semiconductors

The photooxidation of iron(II) in aqueous ethanol is less in presence of TiO₂, ZrO₂, V₂O₅, CeO₂, ZnO, Fe₂O₃, CdO, PbO, SnO₂, CdS, ZnS and Al₂O₃ than in their absence. The photogeneration of iron(III) was studied at different [Fe²⁺], amounts of semiconductors suspended, airflow rates, light intensities, solvent compositions and wavelengths of illumination. The catalysts show sustainable photocatalytic activity. The metal oxides and sulfides reduce iron(III), formed by the homogeneous photooxidation of iron(II). TiO₂, CeO₂, ZnO, Fe₂O₃, CdO, PbO, SnO₂ and Al₂O₃ effectively suppress the photooxidation of iron(II); ZrO₂, ZnS and CdS also suppress but not completely. At high catalyst-loading V₂O₅ catalyses the photooxidation of iron(II). The mechanisms of the photocatalytic processes are discussed.     

山西典型无烟煤灰流动性的调控

为满足气化炉液态排渣的要求,考察和比较了CaO、MgO和Fe₂O₃三种助熔剂对山西典型无烟煤煤灰流动性(熔融性和黏温特性)的影响.研究发现,MgO对硅铝比在1.2~2.0的高硅铝煤灰的流动温度降低最有效,其次为CaO和Fe₂O₃,这是由于使用各种助熔剂时生成不同的高温稳定矿物组分造成的.针对三种助熔剂建立了流动温度和完全液相温度的关系式,并得到了CaO和Fe₂O₃含量与流动温度的关系:FT = 1 593-9.573 × w_CaO (R²=0.9429) 和FT =1 576-8.330 6 × w_Fe2O3 (R²=0.955 9),可以用于指导助熔剂的添加.CaO无论从降低黏度数值或降低临界黏度温度都具有最好的效果.Ca²⁺、Mg²⁺、Fe²⁺的电负性差异和高温下的产物不同是三种助剂对黏度数值影响不同的根本原因; Mg²⁺、Fe²⁺具有较小的离子半径以及单质铁在高温下析出是导致临界黏度温度较高的原因.     

Fe1-xO基氨合成催化剂的制备化学

采用高温熔融法制备了各类铁氧化物,用XRD分析了熔融过程中的物相变化,EOS考察了熔融体凝固-冷却速率对助催化剂分布的影响.结果表明,采用大气气氛中的高温熔融法不能制取Fe₂O₃和化学计量比的FeO,前者会发生分解反应,后者会发生歧化反应;在1.333≤n(O)/n(Fe)<1.38范围时,可以制取Fe₃O₄或非化学计量比的Fe₃-yO₄;在1.113O₄和FeO的混合氧化物;在1.0451-xO,即维氏体.Fe_1-xO基催化剂的制备必须采用物理熔融与化学反应相结合的工艺.凝固冷却速度对抑制氧化亚铁的氧化反应和歧化反应,保证助催化剂的均匀分布和晶粒度均有很大影响     

Fe3O4矿石球团焙烧化学的穆斯堡尔效应研究

应用穆斯堡尔效应实验对焙烧过程中球团的矿相变化及铁离子的赋存情况进行了研究,进一步了解了焙烧化学。     

Effect of interaction between potassium and structural promoters on Fischer–Tropsch performance in iron-based catalysts

The Fischer–Tropsch synthesis (FTS) performances of iron-based catalysts promoted with/without potassium compounds containing different acidic structural promoters (Al₂O₃, SiO₂, and ZSM-5) were studied in this research. Characterization technologies of temperature-programmed reduction with CO (CO-TPR), powder X-ray diffraction (XRD) and Mössbauer effect spectroscopy (MES) were used to study the effect of K–structural promoter interactions on the carburization behaviors of catalysts. It showed that the addition states of potassium (K–Al₂O₃, K–SiO₂, K–ZSM-5 and K-free) have a significant influence on the formation of iron carbides, which shows a following sequence in promotion of carburization: K–Al₂O₃ > K–SiO₂ > K–ZSM-5 > K-free. The FTS reaction test was performed in a fixed bed reactor. It is found that Fe/K–Al₂O₃ catalyst leads to the highest CO conversion, Fe/K–ZSM-5 catalyst shows the highest H₂ conversion, and Fe/K-free catalyst shows the lowest CO and H₂ conversion. As for the hydrocarbon selectivity, Fe/K–SiO₂ catalyst yields the lowest methane and the highest C₅⁺ products, Fe/K–ZSM-5 catalyst yields higher methane and the highest liquid hydrocarbon product, whereas Fe/K-free catalyst yields the highest methane and the lowest C₅⁺ products. These results can be explained from the interaction between potassium and structure promoters, and the spillover of reactants or intermediates from Fe sites to the surfaces of structural promoters.     

锅炉结渣初始沉积层微观沉积机理研究

选取矾土Al₂O₃和赤铁矿Fe₂O₃,对这两种矿物做弹性常数的微观分析、对比,X射线衍射分析表明,煤灰与初始沉积层中的矿物种类相同,但两者中矾土Al₂O₃和赤铁矿Fe₂O₃的含量相差很大。采用第一性原理(first-principles)的超软赝势平面波方法,对Al₂O₃和Fe₂O₃的电子结构、弹性常数进行了计算。结果表明,从两种物质的结构角度分析,Al₂O₃晶体中Al³⁺、O^2-的堆积排列相对于Fe₂O₃中Fe³⁺、O^2-要稀疏,这是它们性质不同的结构原因;对于两晶体在<100>方向和切向上的化学键, Fe-O键比Al-O键更容易变形或者断裂,从而导致Fe₂O₃极易沉积在清洁水冷壁上;对Fe₂O₃,切向面对其沉积起了关键性的作用。