基于固有耗散的材料疲劳性能快速评估方法

材料疲劳损伤的累积过程是一个伴随着温度变化的能量耗散过程. 相比于疲劳过程中试件的局部温升,固有耗散是材料能量变化的直接反映,与材料微观结构演化联系也更为紧密,因此以材料的固有耗散作为疲劳损伤指标具有更加明确的物理意义. 基于对试件表面温升的一维双指数回归,构建了一种材料固有耗散的计算模型,并在此基础上提出了一种快速评估材料疲劳性能的能量方法. 利用该能量方法,对FV520B 钢的疲劳性能进行了实验研究,并对实验结果进行了分析与对比,从而证明了该能量方法及计算模型的可行性和有效性.      

基于能量耗散的岩石脆性评价方法

脆性评价是页岩气钻井以及压裂工艺设计的重要环节.然而,现今对于脆性的定义十分模糊,且脆性评价的方法没有成熟的理论作为支撑.本文以岩石应力应变关系为基础,采用能量法来进行储层岩石脆性评价.根据断裂力学裂纹尖端的非线性场理论,以前端区作为尖端特殊的屏蔽构型,来描述储层岩石在断裂过程中能量的耗散. 通过计算本征内聚力与前端区稳态阻力比值来表征储层岩石的脆性指数. 研究表明,能量耗散相对越大,岩石的脆性指数越低,其塑性特征表现得越明显. 基于能量耗散的储层岩石脆性评价是分析岩石力学特性的重要内容,也为压裂选层提供了重要依据.      

THE FATIGUE CONSTITUTIVE MODEL OF CONCRETE BASED ON MICRO-MESO MECHANICS

该文致力于混凝土疲劳损伤发展机理的微细观解释. 以速率过程理论为基础,通过考虑裂纹断裂过程区中的水分子动力作用,在细观尺度上建立了具有物理机理的疲劳损伤能量耗散表达式. 结合细观随机断裂模型,以宏观损伤力学为框架,建立了疲劳损伤演化方程. 通过数值模拟,计算了单轴受拉时的疲劳损伤演化以及不同加载幅度下的疲劳寿命. 与相关试验结果的对比显示出该文模型能够很好地表现混凝土材料的疲劳损伤演化过程.     

考虑非比例附加损伤的多轴低周疲劳寿命模型

基于临界面法, 提出了一种能够反映非比例疲劳寿命锐减现象的多轴低周疲劳寿命模型. 与传统临界面模型只考虑附加强化效果不同, 新的模型在疲劳损伤参量中引入新定义的非比例附加损伤系数, 能综合考虑非比例加载条件下附加强化和载荷路径两种因素对疲劳寿命减少的影响, 并且分别以最大切应变和最大损伤平面作为临界面来构建疲劳损伤参量, 反映了临界面的选取对模型预测结果的重要影响. 从已发表文献中选用8 种材料的多轴疲劳试验结果进行验证, 新模型能同时适用于比例和非比例加载, 并且具有很好的寿命预测精度和材料适用性.      

A NEW APPROACH TO FREE VIBRATION ANALYSIS OF A BEAM WITH A BREATHING CRACK BASED ON MECHANICAL ENERGY BALANCE METHOD

In this paper, a new approach to free vibration analysis of a cracked cantilever beam is proposed. By considering the effect of opening and closing the crack during the beam vibration, it is modeled as a fatigue crack. Also, local stiffness changes at the crack location are considered to be a nonlinear amplitude-dependent function and it is assumed that during one half a cycle, the frequencies and mode shapes of the beam vary continuously with time. In addition, by using the experimental tests, it is shown that the local stiffness at the crack location varies continuously between the two extreme values corresponding to the fully closed and the fully open cases of the crack. Then, by using the mechanical energy balance the dynamic response of the cracked beam is obtained at every time instant. The results show that for a specific crack depth, by approaching the crack location to the fixed end of the beam, more reduction in the fundamental frequency occurs. Furthermore, for a specific crack location, the fundamental frequency diminishes and the nonlinearity of the system increases by increasing the crack depth. In order to validate the results, the variations of the fundamental frequency ratio against the crack location are compared with experimental results.