Synthese von Triafulven-Vorstufen für Retro-Diels-Alder-Reaktionen

Synthesis of Triafulvene Precursors for Retro-Diels-Alder Reactions Triafulvene precursors exo? 15 and endo? 15 have been prepared by addition of dibromocarbene to benzobarrelene 12 followed by a lithium-halogen exchange, methylation, and elimination of HBr ( 12→13→14→15 ), (Scheme 2). Gas-phase pyrolysis of exo/endo-mixtures of 15 above 400° gave minor amounts of naphthalene ( 16 ), traces of a hydrocarbon C₄H₄ identified by MS (presumably triafulvene 1 ) and predominantly (36%) the isomerization product 17 (Scheme 3). In a second synthetic approach the well-known cycloheptatriene-norcaradiene equilibrium of type 26?27 has been utilised to prepare various endo-trans-3-(X-methyl) tricyclo[3.2.2.0^2,4]nona-6,8-dienes 31 (Scheme 5). However, numerous elimination experiments 31→9 failed so far. The structure of two rearrangement products 33 and 34 (Scheme 6) has been elucidated.     

Reductive Radical Cyclisations of Bromo Acetals and (Bromomethyl)silyl Ethers of Terpenoid Alcohols

The tin hydride promoted and the reductive vitamin B₁₂ catalysed radical cyclisation of mixed 2-bromo-acetaldehyde acetals and of (2-bromomethyl)dimethylsilyl ethers of allylic terpenoid alcohols has been investigated: 3-oxadeca-5,9-dien-l-yl radicals undergo 5-‘exo’ cyclisation to oxolanes (Scheme 4), 3-oxa-2-siladeca-5,9-dien-1-yl radicals sequential 6-‘endo’→5-‘exo’ tandem cyclisation to cis-3-oxa-4-silabicyclo[4.3.0]nonanes (Scheme 5), and 3-oxa-2-silatetradeca-5,9,13-trien-l-yl radicals sequential 6-‘endo’→6-‘endo’→5-‘exo’ triple cyclisation to trans-transoid-trans- 12-oxa-11-silatricyclo[7.4.0.0^2,6] tridecanes (Scheme 6).     

3-Triethylsilyloxypentadienyllithium,a Versatile 1,3-Diene- or Vinyl Ketone-Building Block

Deprotonation of the 3-trialkylsilyloxy-1,4-diene 3a and subsequent electrophilic substitution of the non-isolated 3-trialkylsilyoxypentadienyllithium 4 gives the α- and γ-products 8 and/or 6 in good yields. Whereas alkylation of 4 proceeds with variable regioselectivity (Table 1) aldehydes and ketones attack preferentially the γ-position of 4 (Table 2). The desired γ-products 6 may be directly subjected to inter- and intramolecular [4 + 2]-additions as demonstrated by the reactions 5a (? 6d ) → 7 and 6h → 19 (Schemes 4 and 12). Alternatively, smooth fluoride-promoted silylether-cleavage 6 → 11 (Scheme 8) provides a convenient approach to substituted vinyl ketones such as to the natural products 11f (Table 3). The stereoselective conversion 6k → 23 (Scheme 13) implies an endo-selective intramolecular Diels-Alder addition ( 26 → 23 ) and exemplifies the use of 4 as an equivalent of the hypothetical anion IV . Furthermore, some electrophilic substitutions of the hexadienyllithium 15 have been studied (Scheme 10).     

Nucleophilic Addition to C,C-Double Bonds. IV. Ether formation by intramolecular addition to unsymmetrically alkyl-substituted C,C-double bonds

Tricyclic olefinic alcohols containing an unsymmetrically alkyl-substituted C, C-double bond were cyclized intramolecularly to their corresponding ethers under basic conditions: 9 → 12 , 10 → 17 + 18 , and 11 → 12 (Scheme 3, Table 1). The reactivity is mainly due to relieve of ground state strain. Alcohol 9 (endocyclic double bond) isomerized under intramolecular assistance by the hydroxyl group to 11 (exocyclic double bond) before cyclization to 12 occurred (Scheme 5). The latter step being the faster one, no isomerization 11 → 9 was observed.     

A Flexible Stereoselective Synthesis of the Spirosesquiterpenes (±)-β-Acorenol, (±)-β-Acoradiene, (±)-Acorenone-B and (±)-Acorenone via an Intramolecular Ene-Reaction

The racemic spirosesquiterpenes β-acorenol ( 1 ), β-acoradiene ( 2 ), acorenone-B ( 3 ) and acorenone ( 4 ) (Scheme 2) have been synthesized in a simple, flexible and highly stereoselective manner from the ester 5 . The key step (Schemes 3 and 4), an intramolecular thermal ene reaction of the 1,6-diene 6 , proceeded with 100% endo-selectivity to give the separable and interconvertible epimers 7a and 7b . Transformation of the ‘trans’-ester 7a to (±)- 1 and (±)- 2 via the enone 9 (Scheme 5) involved either a thermal retro-ene reaction 10 → 12 or, alternatively, an acid-catalysed elimination 11 → 13 + 14 followed by conversion to the 2-propanols 16 and 17 and their reduction with sodium in ammonia into 1 which was then dehydrated to 2 . The conversion of the ‘cis’-ester 7b to either 3 (Scheme 6) or 4 (Scheme 7) was accomplished by transforming firstly the carbethoxy group to an isopropyl group via 7b → 18 → 19 → 20 , oxidation of 20 to 21 , then alkylative 1,2-enone transposition 21 → 22 → 23 → 3 . By regioselective hydroboration and oxidation, the same precursor 20 gave a single ketone 25 which was subjected to the regioselective sulfenylation-alkylation-desulfenylation sequence 25 → 26 → 27 → 4 .     

Heterodiamantane und strukturell verwandte Verbindungen. III.. Pentacyclische diäther der C11-reihe. 5, 13-Dioxapentacyclo-[6.5.0.02,6.03,12.04,9]tridecan, 4, 13-dioxapentacyclo [6.4.1.02,7.03,10.05,9]tridecan und 3, 10-dioxapentacyclo [7.3.1.02,7.04,12.06,11]tridecan

Heterodiamantanes and Structurally Related Compounds. Part III. The Pentacyclic C₁₁-Diethers 5, 13-Dioxapentacyclo [6.5.0.0^2,6.0^3,12.0^4,9]tridecane, 4, 13-Dioxapentacyclo [6.4.1.0^2,7.0^3,10.0^5,9]tridecane, and 3, 10-Dioxapentacyclo [7.3.1.0^2,7.0^4,12.0^6,11]tridecane In connection with the studies on heterodiamantanes and structurally related compounds the three novel pentacyclic diethers 3 – 5 were prepared starting from the cyclopentadienone dimer 6 . All four compounds have as common features a central carbocyclic 6-membered ring with four axial alkyl substituents and two oxygen functions in 1, 4 position. The required eleventh C-atom was introduced by dichlorocarbene addition either to 6 ( → 7 ) (Scheme 2) or to 29 ( → 28 ) (Scheme 4). Diether 3 was obtained by reduction of 26 (Scheme 2), a suitable precursor prepared either by intramolecular addition ( 24 → 26 ; Scheme 2) or substitution ( 30 → 26 , 31 → 26 ; Scheme 4), as well as by direct substitution ( 44 → 3 , 42 → 3 ; Scheme 5). Diether 4 was the product of a direct substitution ( 39 → 4 , 36 → 4 ; Scheme 5). The synthesis of diether 5 was achieved from the addition product 51 (resulting from the alcohols 47 and 48 ; Scheme 6). Diether 4 is the thermodynamically least stable of the three diethers 3 – 5 . It was easily isomerized to 5 on treatment with concentrated sulfuric acid in benzene whereas 3 and 5 remained unchanged under these conditions.     

Synthesen des Analgetikums 2-[1-(m-Methoxyphenyl)-2-cyclohexen-1-yl]-N,N -dimethyl-äthylamin

Syntheses of the Analgesic 2-[1-(m-Methoxyphenyl)-2-cyclohexen-1-yl] -N,N-dimethyl-ethylamine Three principal routes to 2-[1-(m-methoxyphenyl)-2-cyclohexen-1-yl]- N,N-dimethyl-ethylamine (13) , a compound with interesting analgesic properties, are described. In the first, derivatives of [1-(m-methoxyphenyl)-2-cyclohexen-1-yl]acetic acid (10) (alternatively the ethyl ester 29 , the dimethylamide 32 or the nitrile 34 ) serve as crucial intermediates. All three can be synthesized from 2-(m-methoxyphenyl)cyclohexanone (1) by sequences comprising successively C-alkylation ( 1→2,4,5; Scheme 1), reduction of the ketone carbonyl group ( 2→6;4→18;5→19; Scheme 1 and 2) and elimination ( 16→29; 18→32; 19→34; Scheme 2). The relative configuration of the cyclohexanols 16, 18, 19 and of a series of related compounds is established by chemical correlation with the lactone 30 the structure of which follows from ¹H-NMR. data (Scheme 2). The second route creates the intermediates 29 and 32 by ester- or amide-enolate-Claisen-type-rearrangement reactions starting from 3-(m-methoxyphenyl)-2-cyclohexen-1-ol ( 39; Scheme 3). Compounds 29, 32 and 34 are transformed into the target molecule 13 by standard reactions. A Hofmann elimination of the quaternary ammonium fluoride 50 (X=F), derived from the known cis-perhydroindoline 48 , is the essential step in the third approach to 13 (Scheme 4).     

The Synthesis of 4b, 5, 12, 12a-Tetrahydro-5, 12-ethano-13H-indeno[2,3-b]anthracenes, 4b, 5, 10, 10a - tetrahydro-5,10-ethano-11H-indeno[2,3-b]naphtalenes and 1,2,3,4,4a, 9a-Hexahydro-1,4-(peri-naphthaleno)-fluorenes

The synthesis of endo- and exo-13-oxo-4b, 5, 12, 12a-tetrahydro-5, 12-ethanoindeno[2,3-b]anthracene ( 23 ; Schemes 1 and 2), exo- and endo-11-oxo-4b, 5, 10, 10a-tetrahydro-5, 10-ethano-indeno[2,3-b]naphthalene ( 31 ; Scheme 3), 1,2,3,4,4a,9a-hexahydro?1,4-(peri-naphthaleno)-fluoren-9-one (36; Scheme 4), and the corresponding hydrocarbons of the stereoisomeric ketone pairs 23 and 36 , is described.     

Synthese und Reaktionen 8-gliedriger Heterocyclen aus 3-Dimethylamino-2,2-dimethyl-2H-azirin und Saccharin bzw. Phthalimid

Synthesis and Reactions of 8-membered Heterocycles from 3-Dimethylamino-2,2-dimethyl-2H-azirine and Saccharin or Phthalimide 3-Dimethylamino-2,2-dimethyl-2H-azirine ( 1 ) reacts at 0-20° with the NH-acidic compounds saccharin ( 2 ) and phthalimide ( 8 ) to give the 8-membered heterocycles 3-dimethylamino-4,4-dimethyl-5,6-dihydro-4 H-1,2,5-benzothiadiazocin-6-one-1,1-dioxide ( 3a ) and 4-dimethylamino-3,3-dimethyl-1,2,3,6-tetrahydro-2,5-benzodiazocin-1,6-dione ( 9 ), respectively. The structure of 3a has been established by X-ray (chap. 2). A possible mechanism for the formation of 3a and 9 is given in Schemes 1 and 4. Reduction of 3a with sodium borohydride yields the 2-sulfamoylbenzamide derivative 4 (Scheme 2); in methanolic solution 3a undergoes a rearrangement to give the methyl 2-sulfamoyl-benzoate 5 . The mechanism for this reaction as suggested in Scheme 2 involves a ring contraction/ring opening sequence. Again a ring contraction is postulated to explain the formation of the 4H-imidazole derivative 7 during thermolysis of 3a at 180° (Scheme 3). The 2,5-benzodiazocine derivative 9 rearranges in alcoholic solvents to 2-(5′-dimethylamino-4′,4′-dimethyl-4′H-imidazol-2′-yl) benzoates ( 10 , 11 ), in water to the corresponding benzoic acid 12 , and in alcoholic solutions containing dimethylamine or pyrrolidine to the benzamides 13 and 14 , respectively (Scheme 5). The reaction with amines takes place only in very polar solvents like alcohols or formamide, but not in acetonitrile. Possible mechanisms of these rearrangements are given in Scheme 5. Sodium borohydride reduction of 9 in 2-propanol yields 2-(5′-dimethylamino-4′,4′-dimethyl-4′H-imidazol-2′-yl)benzyl alcohol ( 15 , Scheme 6) which is easily converted to the O-acetate 16 . Hydrolysis of 15 with 3N HCl at 50° leads to an imidazolinone derivative 17a or 17b , whereas hydrolysis with 1N NaOH yields a mixture of phthalide ( 18 ) and 2-hydroxymethyl-benzoic acid ( 19 , Scheme 6). The zwitterionic compound 20 (Scheme 7) results from the hydrolysis of the phthalimide-adduct 9 or the esters 11 and 12 . Interestingly, compound 9 is thermally converted to the amide 13 and N-(1′-carbamoyl-1′-methylethyl)phthalimide ( 21 , Scheme 7) whose structure has been established by an independent synthesis starting with phthalic anhydride and 2-amino-isobutyric acid. However, the reaction mechanism is not clear at this stage.     

Acid-Catalysed Dehydration of Tricyclic Unsaturated Alcohols

The tricyclic alcohols 3–7 , derived from the corresponding ketones 1 and 2 (Scheme 1), by action of acids underwent dehydration with skeletal rearrangements. Dehydration of 3 and 4 with POCl₃/pyridine (procedure A) afforded the polycyclic hydrocarbons 9, 10 , and 12, 13 , respectively. With TsOH (procedure B), on the other hand, 3 and 4 gave homo-triquinacenes 10 and 14 respectively, as well as the polycyclic ethers 11 and 15 (Scheme 2). Hydrocarbon 9 (or 12 ) was converted into 10 FSO₃H to the tertiary alcohol 16 (Scheme 4). Plausible mechanisms for these transformations are summarized in Scheme 8. Dehydration of the secondary alcohols 5 and 7 was effected by procedure A. While treatment of alcohol 5 with POCl₃/pyridine yielded two isomeric hydrocarbons 17 and 18 , similar dehydration of its epimeric alcohol 7 afforded hydrocarbon 21 as the sole product. The tertiary alcohol 6 was dehydrated by both procedures to yield two isomeric hydrocarbons 19 and 20 (Scheme 5). Hydrocarbon 20 was converted into 19 by procedure B (mechanisms, Scheme 10). Reaction of ketone 2 with CF₃COOH gave the addition product 22 converted into vinylsulfonyl fluorides 24 and 25 by treatment with FSO₃H (Scheme 6). Homo-triquinacenes 10 and 14 reacted smoothly with 4-phenyl-1,2,4-triazoline-3,5-dione to give the ‘ene’-reaction products 26 and 27 , respectively.     

Reactions of Tricyclic Vinylcyclopropanes with Metal Carbonyls

Irradiation of the tricyclic vinylcyclopropane 3 and Fe(CO)₅ resulted in the formation of the s?,π-bonded iron complex 7 and the π,π-bonded iron complex 8 (Scheme 2). Complex 8 was easily degraded with silica gel to give hydrocarbon 9 , which reproduced 8 by photolysis in the presence of Fe(CO)₅. Photolysis of 7 afforded a mixture of 3 (23%), 9 (27,5%), and three other hydrocarbons. Oxidative degradation of 7 with ceric ammonium nitrate in methanol gave the dimethoxy-hydrocarbon 10 . - The tricyclic hydrocarbon 3 isomerized thermally to the bicyclic hydrocarbon 11 (with CH₃? C(9) in an exo position) via a homosigmatropic [1,5]-H-shift. On the other hand, 3 was converted into the other isomer 14 (with CH₃? C(9) in an endo position) by action of Mo(CO)₆ or TsOH. Both isomers 11 and 14 reacted with 4-phenyl-1,2,4-triazoline-3,5-dione to give the isomeric Diels-Alder adducts 12 and 15 , respectively, which were photochemically converted into the cage compounds 13 and 16 , respectively (Scheme 3). - Photochemical reaction of the tricyclic vinylcyclopropane 6 with Fe(CO)₅ gave the σ,π-bonded iron complexes 17 and 18 . Heating of 17 at 80° resulted in a loss of one mol of carbon monoxide to give 18 in quantitative yield. Oxidative degradation of 17 with ceric ammonium nitrate in ethanol afforded the polycyclic lactones 19 and 20 by a novel type of reaction (Scheme 4). - The tricyclic ketone 21 was thermally converted into the α,β-unsaturated ketone 22 via a homosigmatropic [1,5]-H-shift. The configuration at C(7) of 22 was confirmed to be same as that of 11 (CH₃? C(9) in an exo position) by chemical conversions: 22 was reduced with NaBH₄ to alcohol 23 which, in turn, was dehydrated with POCl₃/pyridine to 11 (Scheme 5). Reaction of ketone 21 with Mo(CO)₆ gave the α,β-unsaturated ketone 25 and a cage compound X , whose structure was not fully elucidated. - Reaction of the polycyclic epoxide 26 with Fe₂(CO)₉ or Mo(CO)₆ yielded the allyl alcohol 27 in a novel type of reaction. The epoxides 29 and 32 were similarly converted into the corresponding allyl alcohols 30 and 33 , respectively (Scheme 6).     

The Course of the Catalytic Hydrogenation/Isomerization Reaction of Steroidal Ring B Olefins in the 13β- and 13α-Series

The course of the catalytic hydrogenation and isomerization (H₂/Raney-Ni/dioxane or H₂/Pd/C/EtOH) of Δ^5.7-, Δ⁷-, Δ⁸-, and Δ⁸⁽¹⁴⁾-steroid olefins was shown to depend strongly on the configuration at C(13). The known hydrogenation/isomerization of reactions of Δ^5.7-dienes in the 13β-series to Δ⁷-(H₂/Raney-Ni/dioxane) and Δ⁸⁽¹⁴⁾-olefins (H₂/Pd/C/EtOH) were also confirmed in the 3β, 19-epoxy-13β- and 3-Oxo-19-acetoxy-13β-steroid series (e.g. 32 → 35 → 37 , Scheme 3). On the other hand, in the corresponding 13α-steroid series the same reactions afforded the Δ⁷-. and the Δ⁸-olefins (mixture of products with H₂/Raney-Ni/dioxane; quantitatively the Δ⁸-compounds with H₂/Pd/C/EtOH; s. e.g. Scheme 3). A similar dependence on the C(13) configuration was observed in the allylic oxidation of these olefins with SeO₂ (Fieser's test, see Table), and in the acid catalyzed opening of the 7α, 8α-epoxides (e.g. 60 → 62 + 63 in the 13β-series, and 56 → 64 + 65 in the 13α-series, Scheme 8).     

Synthese des Sesquiterpen-Ketones Shyobunon und seiner Diastereomeren

Synthesis of the Sesquiterpene Ketone Shyobunon and of its Diastereoisomers Shyobunon ( 12 ) and 6-epishyobunon ( 13 ) as well as their epimers 10 and 11 were synthetized in five steps from geranyl- ( 1 ) and nerylsenecionate ( 2 ), respectively. Ester enolate rearrangement [5] of 1 and 2 furnished the key intermediates 3 and 4 in high yield and in about 80% stereoselectivity [6] (Scheme 1). Conversion of the acid mixture 3 / 4 to the cyclohexanone derivatives 7 and 8 succeeded in 35–40% yield by means of cyclization of their acidchlorides with tin tetrachloride to the mixture of 5 and 6 , followed by HCl elimination with diazabicyclononene (DBN) (Scheme 2). Selective reduction of 7 to 10 and 11 , and 8 to 12 and 13 with triphenyltinhydride completed the synthesis. The relative configuration of 10 and 11 as well as of 12 and 13 were deduced from the ¹³C-NMR. spectra (Scheme 4, Table 2). The structure of ‘epishyobunone’ is revised: it has the structure 13 , and not 11 as described earlier [1]. This is discussed in connection with the rearrangement of acoragermacrone ( 16 ) [18] to shyobunone ( 12 ) and 6-epishyobunone ( 13 ) (Scheme 5).     

The adamantane rearrangement of syn- and anti-Tricyclo[4.2.1.1.12,5] decane. Part II. Rearrangements initiated by regioselective formation of carbocations at C(3) and C(9)

The endo- and exo-alcohols 5–12 of syn-( 1 ) and anti-tricyclo[4.2.1. 1^2.5]decane ( 2 ) were treated with BF₃/Et₃SiH (ionic hydrogenation) in order to study the behaviour of the corresponding regioselectively generated carbocations at C(3) ( a (syn), b (anti)) and C(9) ( c (syn), d (anti)). The anti-hydrocarbon 2 is practically the sole product obtained starting with the four 3-alcohols (via a → b from 5 and 6 (syn) and via b from 9 and 10 (anti)). The four 9-alcohols in each case yield a mixture of 2-endo, 3-endo- ( 3 ) and 2-exo,3-exo-trimethylene-8,9,10-trinorbornane (4) (via c → e from 7 and 8 (syn) and via d → f from 11 and 12 (anti)), but no hydrocarbon 2 , i.e. none of the 1,3-H shifts c → a and d → b is involved.     

Nucleophilic Addition to C,C Double Bonds. Proximity and homoconjugative effects. Preliminary communication

Proximity effects alone as well as in combination with electronic effects are responsible for the observed phenomenon of base-catalyzed ether formation initiated by nucleophilic attack on a C, C double bond of the tricyclic olefin alcohols 1–10 (Scheme 1, Table 1). With compounds 1–4 , bearing a keto group, formation of the ethers 11–14 proceeds through a corresponding homoenolate b (Scheme 2) as an intermediate. In one case such a species could be trapped as the methyl ether 21 (Scheme 3). Special attention is given to the stereochemical course of the homoketonization. Ring opening in 21 under acidic conditions occurs regioselectively, however non-stereoselectively (Scheme 3). Full regio- and stereoselectivity (retention) is observed under basic conditions starting from the unsaturated keto alcohols 1 and 2 (Scheme 4) as well as from the keto ethers 11 and 12 (Scheme 5, Table 2).     

The Enantioselective Synthesis of (+)-Estradiol from 1,3-Dihydrobenzo[c]thiophene-2,2-dioxide by Successive Thermal SO2-Extrusion and Cycloaddition Reactions. Preliminary communication

The optically pure steroid (+)- 15 has been synthesized from the easily accessible (+)-carboxylic acid 11 by a sequence of 7 steps in 50% overall yield. The key steps are the regioselective deprotonation/alkylation 7+13 → 14 and the thermal SO₂-extrusion/cycloaddition 14 → 15 (Scheme 3). The compound (+)- 15 has been readily converted to the naturally occurring (+)-estradiol ( 17 ) in 60% yield.     

Umcyclopropanisierung bei der Tetrabromierung eines tricyclischen Ketons zu 3exo, 4endo, 6exo-Tribrom-7-brommethyl-1,5-dimethyl-tricyclo[3.2.1.02,7]octan-8-on

Transcyclopropanation during the Tetrabromination of a Tricyclic Ketone to 3 exo, 4 endo, 6exo-Tribromo-7-bromomethyl-1,5-dimethyl-tricyclo[3.2.1.0^2,7]octan-8-one Bromination of the tricyclic ketone 1 with an excess of bromine at low temperature gives in approximately 30% yield the highly crystalline tricyclic tetrabromide 2 (Scheme 1). The structure of 2 was established by NMR.- and especially X-ray-analysis (Fig.1). Treatment of 1 with 1 mol-equ. of bromine gives an unstable dibromide, to which the structure 3 was assigned on the basis of its NMR.-spectrum and its further bromination to 2 (Scheme 1). In the course of the tetrabromination of 1 the original cyclopropane ring is opened in the first step ( 1 → 3 ) and another cyclopropane ring is formed in the second step ( 3 → 2 ) (cf. Scheme 3).     

Formale Totalsynthese von (±)-Isocomen durch Anwendung der α-Alkinon-Cyclisierung

Formal Total Synthesis of (±)-Isocomen by Application of the α-Alkinon Cyclization A total synthesis of the racemic form of the sesquiterpene isocomene ( A ) was accomplished by application of the cyclopentenone anellation B→D (Scheme 1) which includes the α-alkynone cyclization C→D , a gas-phase flow thermolytic process. Starting with the known product 2 (Scheme 3) of the anellation B→D , the elaboration of ring C of A proceeded in 9 steps to the α-alkynone 16 (Scheme 5) which was cyclized at 540° selectively to give the angularly fused triquinane 4 (77%). A two-step procedure then led to 5 (Scheme 6), a last but one intermediate in a known total synthesis of (±)- A . The conversion of 16 to 4 also demonstrated the compatibility of an acetoxy function with the anellation sequence B→D .     

Solvolysen von 4-Alkylidenbicyclo[3.2.0]hept-2-en-6-olen. Synthese von 1-Vinylfulvenen und 8,8-Diphenylheptafulven

Solvolysis of 4-Alkydenbicyclo[3.2.0]hept-2-en-6-oles. Synthesis of 1-Vinylfulvenes and 8,8-Diphenylheptafulvene Four 4-alkylidenebicyclo[3.2.0]hept-2-en-6-ones 2–5 , obtained via ketene cycloaddition to fulvenes, were reduced to separated mixtures of the ‘endo’ -alcohols ‘endo’- 6 to ‘endo’- 9 (68–73%) and ‘exo’- 6 to ‘exo’- 9 (3–20%). Treatment of some of these alcohols with (CF₃SO₂)₂O in CH₂Cl₂/pyridine caused a spontaneous solvolysis to yield unsaturated 7-membered rings as pyridinium triflates 10–12 or 1-vinylfulvenes 13 and 14 , a new class of reactive tetraenes: Both ‘endo’- 9 and ‘exo’- 9 , having two methyl groups at C(7), were converted into the vinylfulvene 13 (≈ 80%). The alcohols with two H-atoms at C(7) exhibited a stereochemically controlled reaction selectivity, inasmuch as ‘endo’- 6 to ‘endo’- 8 afforded only the corresponding 7-membered-ring pyridinium salts 10–12 (66–79%), while ‘exo’- 6 produced only the vinylfulvene 14 (77%). A stereoelectronic control argument explains the C(1), C(5)-bond cleavage with ‘endo’- B and ‘endo’– 6 -‘endo’- 8 , as well as the C(1), C(7)-bond cleavage with ‘exo’- B , ‘exo’- 6 , and with both ‘endo’- and ‘exo’- 9 . Thermolysis (120°) of the pyridinium triflates 10 and 11 yielded the 3-isopropenyl-cycloheptatrienes 18 and 19 , respectively (≈90%); similar conditions (145°) applied to the triflate 12 produced the doubly cyclized fluorene derivative 21 (60%). When the iodide 22 derived from the triflate 12 with Nal was heated in refluxing toluene, 8,8-diphenylheptafulvene ( 23 , 86%) was obtained.     

Intramolekulare Inversionssubstitution am Dreiring von 77exo-Brombicyclo[4.1.0]heptan-3endo-ol unter Bildung eines Tetrahydrofuranringes

Intramolecular Substitution under Inversion at the Threemembered Ring of 7exo-Bromobicyclo[4.1.0]heptan-3endo-ol yielding a Tetrahydrofuran Ring The reaction 1a → 2a involving substitution at a cyclopropane carbon atom can be observed only with the bromophilic alkyllithium reagents but not with the bases lithium diisopropyl amide (LDA) (Table 1) or potassium t-butoxide (KTB). The mechanism must be an insertion as outlined in Scheme 1. - The monobromides 1b , 1c and 1d are prepared stereoselectively from the acetal 3a . Again, cyclization of 1b takes only place with LDA in the presence of alkyllithium (Table 2, entries 1--4) suggesting an insertion mechanism (route (a) or (b) in Scheme 2). In contrast, KTB effects the substitution in high yield with no loss (from 1c ) or incorporation of deuterium at the cyclopropane substitution center (Table 2, entries 5--7); the possibility is discussed that this process is an S_N2-type reaction.