甲硅烷基(硅烯)钌配合物中甲硅烷基甲氧基化反应机理的理论研究

采用密度泛函理论(DFT),我们研究了甲硅烷基(硅烯)钌配合物Cp*Ru(CO)(=Si Mes2)Si Me3与甲醇发生反应的机理.整个反应机理包含以下四个步骤:(1)Ru=Si双键和甲醇发生1,2加成反应,随后通过消除Mes2Si(OMe)H生成Cp*Ru(CO)Si Me3;(2)甲硅烷基配体上的甲基以1,2-甲基的迁移方式从硅原子转移到Ru原子上,并与甲醇发生1,2加成反应,生成的甲烷脱离后产生Cp*Ru(CO)Si(OMe)Me2;(3)重复步骤(2)两次,得到甲氧基化的产物Cp*Ru(CO)Si(OMe)3;(4)异腈配位Ru原子后得到最终的产物Cp*Ru(CO)(CNt-Bu)Si(OMe)3.甲醇和Ru=Si双键的1,2加成是整个反应的决速步骤,自由能势垒为35.3 kcal/mol.此外,还研究了甲硅烷基(锗烯)钌配合物与甲醇的反应机理,相比硅烯配合物,锗烯配合物决速步的能垒相对较低,为31.8 kcal/mol.     

醇-二苯甲酮光化夺氢反应活泼自由基的ESR研究

本文用自由基捕捉剂2,3,4,6-四甲基亚硝基苯(ND)及苯亚甲基叔丁基氮氧化合物(PBN)与ESR相结合的方法研究了CnH_2n+1OH(n=1,2,…8)、(CH₃)₂CH(CH₂)_nOH(n=0,1,2)、CH₂=CHCH₂OH及C₆H₅CH₂OH等十三种醇与二苯甲酮的光化夺氢反应中的活泼自由基,结果表明: 1.用ND时,二苯酮分别夺取CnH_2n+1OH、(CH₃)₂CH(CH₂)_nOH及RCH₂OH(R=CH₂=CH、C₆H₅)中α-C、叔-C及α-C上的氢,而捕捉到C_n-1H_2n-1CHOH、(CH₃)₂CH(CH₂)_nOH及RCHOH自由基。 2.用PBN时,捕捉的自由基与ND捕获的相同。     

铝粉催化肉桂酸酯衍生物区域选择和立体选择性氨溴加成反应研究

在铝粉催化下, 以对甲苯磺酰胺(TsNH₂)和N-溴代丁二酰亚胺(NBS)为氮源和卤素源, 二氯甲烷作溶剂, 建立了肉桂酸酯双键上的高度区域选择和立体选择性氨卤加成反应新体系. 该法在室温下, 无需惰性气体保护可高产率的给出邻位氨基、卤素的加成产物, 最高收率可达97%. 实验证明, 当肉桂酸酯中与双键直接相连苯环上对位具有强给电子基团时(如CH₃O), 该反应的产率高, 同时得到唯一的α-溴-β-氨基肉桂酸酯加成产物|当肉桂酸酯中与双键直接相连苯环对位不具有强给电子基团(如CH₃O)时, 该反应的产率较低, 同时得到唯一的α-氨基-β-溴的肉桂酸酯加成产物. 这一实验结果证明了肉桂酸酯衍生物(缺电子烯键)的氨溴加成反应是一个亲电加成反应. 共考察了20种不同结构的肉桂酸酯的氨溴加成反应情况, 其产物结构经核磁共振氢谱、碳谱、质谱及元素分析方法进行了确证, 并对该反应的机理进行了探讨.     

醋酸钯和四氯对苯醌催化氧化低浓度煤矿瓦斯制甲醇

利用自制的实验系统进行了醋酸溶液中低浓度瓦斯催化氧化制甲醇研究。实验结果表明,以Pd(OAc)₂为催化剂,反应体系中添加对苯醌或四氯对苯醌可改善甲烷活化环境,四氯对苯醌对瓦斯催化氧化过程的作用效果好于对苯醌。四氯对苯醌用量、反应压力和反应温度对瓦斯催化氧化具有重要影响。甲醇生成量随四氯对苯醌用量、反应压力和反应温度升高而增加。CH₃OH是通过反应过程中产生的H₂O₂与CH₄相互作用形成的。CH₃COOCH₃一部分是由Pd²⁺直接氧化CH₄得到的;另一部分是由CH₃OH与反应溶剂CH₃COOH通过酯化反应形成的。     

2,2 -联吡啶钌配合物催化CO2制备环状碳酸酯机理研究

研究了2,2 -联吡啶钌配合物RuCl₃(2,2 -bipy)(CH₃OH)与十六烷基三甲基氯化铵(CTAC)组成的催化体系催化二氧化碳与不同的环氧化合物进行环加成反应制备环状碳酸酯. 在此基础上, 利用电喷雾质谱(ESI-MS)对RuCl₃(2,2 -bipy)(CH₃OH)/CTAC催化CO₂与环氧丙烷(PO)反应制备碳酸丙烯酯(PC)进行了研究, 检测到了反应中间态配合物RuCl₃(2,2 -bipy)(PO)与RuCl₃(2,2 -bipy)(PC), 为该反应机理研究提供了实验证据. 研究结果表明, RuCl₃(2,2 -bipy)(CH₃OH)/CTAC催化体系催化CO₂与环氧化合物的反应首先是通过环氧化合物与RuCl₃(2,2 -bipy)(CH₃OH)中的甲醇分子发生配体交换引发的, 经CTAC中的氯离子进攻环氧化合物开环、二氧化碳插入Ru—O键、分子内关环及消去生成环状碳酸酯.     

甲硫醇、甲醇在金属表面上的分解反应性能比较研究

用键级守恒-Morse势法比较了XH₃SH、CH₃OH在Ni(111)、Pt(111)和Cu(111)面上的热分解反应性能.结果表明,由Ni至Pt再至Cu,CH₃SH中C-S键断裂几率降低,而S-H键裂相对几率增加,而在Cu上仅发生S-H键裂.CH₃OH在Ni上易解离为CH₃和CH₃O-,在Pt、Cu上则较难解离.按Ni、Pt、Cu的顺序,CH₃S-选择性断裂C-S键的几率增加,而CH₃O-则选择性断裂C-H键的几率增加.CH₃XH、CH₃X-(X=O,S)解离活化能垒依Ni、Pt、Cu的顺序增加,CH₃OH在Ni上最终解离为CO,而在Cu上则解离为H₂CO.     

双氧水对于单核铜分子筛催化甲烷直接氧化制甲醇反应性能的利弊（英文）

直接催化甲烷(CH₄)氧化转化制备甲醇(DMTM)是具有较高绿色化学原子经济性的反应过程,且可在常温下进行,是潜在的实现CH₄转化升级的重要过程.作为“圣杯反应”, DMTM性能通常显著受氧化剂影响,使用氧气(O₂)作为氧化剂一步实现DMTM仍然极具挑战性.至今,双氧水(H₂O₂)仍是被报道最多的具有较高CH₄转化速率和甲醇(CH₃OH)选择性的绿色氧化剂.为了深入理解氧化剂如何影响DMTM反应性能,本文基于密度泛函理论计算和微观动力学分析研究了在Cu-ZSM-5, Cu-MOR和Cu-SSZ-13三种具有不同微孔尺寸的单核铜分子筛上DMTM反应机理,以确定H₂O₂作为氧化剂在DMTM反应中的优势和局限性.通过理论计算对比在反应条件下O2和H₂O₂的O–O键活化以及CH₄的C–H键活化过程,发现在单核Cu分子筛中, H     

Criegee中间体CH3CHOO与H2O反应机理及酸催化效应

采用CCSD（T）//B3LYP/6-311+G（d,p）方法研究了H₂O及甲酸等6种有机酸对CH₃CHOO与H₂O加成反应的催化作用。结果表明,非催化反应存在双质子迁移和加成反应2条通道,其中加成反应为优势通道。其加成机理为H₂O中OH加到CH₃CHOO的α-C上,同时H₂O中另一个H迁移到CH₃CHOO的端O上。催化剂H₂O及有机酸以氢键复合物的形式参与反应促进了H质子转移,可降低基元反应能垒和表观活化能,且催化效应与有机酸的强度成正比。例如,当分别用H₂O（pK_a=15.7）、甲酸（pK_a=3.75）和草酸（pK_a=1.23）催化时,生成syn-HAHP的基元反应能垒由非催化的69.12 kJ·mol^-1分别降至40.78、18.88和10.61 kJ·mol^-1。非催化反应具有正的表观活化能,而所有催化反应则均具有负的表观活化能。     

激光烧蚀Al+与乙醇团簇的反应研究

利用激光烧蚀-分子束法对Al等离子体与乙醇团簇的反应进行了研究.飞行时间质谱测得的主要反应产物有Al⁺(C₂H₅OH)_n (n=3～10)与H⁺(C₂H₅OH)_n (n=1～14)团簇正离子和(C₂H₅OH)_n(H₂O)OH^- (n=0～8)团簇负离子.实验发现,烧蚀产生的Al等离子体与脉冲分子束的不同位置反应,对团簇离子的类别、大小及强度分布均产生很大影响.Al等离子体与脉冲分子束的前段反应,主要产生金属-复合物团簇离子Al⁺(C₂H₅OH)_n,且信号较强;Al等离子体与脉冲分子束的中段及后段反应,主要产生质子化团簇离子H⁺(C₂H₅OH)_n和团簇负离子(C₂H₅OH)_n(H₂O)OH^-,同时还出现强度较小的其他水合团簇离子,如H⁺(H₂O)m(C₂H₅OH)_n (m=1～2)等.     

含硅聚硼氮烷裂解转化制备氮化硼陶瓷纤维

以低活性含硅聚硼氮烷为先驱体,经熔融纺丝,BCl₃脱硅不熔化处理以及在氨气气氛中高温裂解制备的氮化硼纤维仍含有硅元素,这主要是含硅聚硼氮烷结构中的B-N(SiMe₃)₂和B-N(SiMe₃)-B由于位阻与BCl₃反应脱除SiMe₃不完全所致.而采用HCl首先与含硅聚硼氮烷反应减少其位阻,再通过BCl₃进一步脱硅不熔化处理制备的氮化硼陶瓷纤维经FT-IR、X射线衍射(XRD)分析表明纤维基本不含硅元素,并且扫描电子显微镜(SEM)表明得到的氮化硼陶瓷纤维直径约为11μm,断面致密无孔,室温下抗拉强度为0.45GPa.     

Group 14 chalcogenides featuring a bicyclo[3.3.0]octane skeleton

Reactions of mixtures of Cl₂MeSiSiMeCl₂ (1) and Me₂MCl₂ (M=Si, Ge, Sn) with either H₂S/NEt₃ or Li₂E (E=Se, Te) yielded the bicyclo[3.3.0]octanes Me₂M(E)₂Si₂Me₂(E)₂MMe₂. A carbon containing analog, (CH₂)₅C(S)₂Si₂Me₂(S)₂C(CH₂)₅, was prepared from 1 and (CH₂)₅C(SH)₂. Crystal structures of three of these compounds were determined and the observed conformations of the bicyclo[3.3.0]octane skeletons compared with results of density functional theory calculations. Another class of silchalcogenides featuring a bicyclo[3.3.0]octane skeleton, E(Me₂Si)₂Si₂Me₂(SiMe₂)₂E, was formed from the doubly branched hexasilane (ClMe₂Si)₂Si₂Me₂(SiMe₂Cl)₂ and H₂S/NEt₃ or Li₂E. All products were characterized by multinuclear NMR (¹H, ¹³C, ²⁹Si, ⁷⁷Se, ¹¹⁹Sn, and ¹²⁵Te).     

Preparation, spectroscopic properties and thermal stabilities of organomercury compounds containing the bulky ligand (Me3Si)3C or (PhMe2Si)3C

Mercury compounds of the types HgR¹R (R¹ = C(SiMe₃)₃; R = Me, ⁱPr, Bu, ^tBu or Ph) and HgR²R(R² = C(SiMe₂Ph)₃; R = Me, Bu, CH₂Ph or Ph) have been prepared. Those containing R¹ were made by reactions of the bromides HgR¹Br with the Grignard reagents MgRX, and those containing R² by reaction of HgR²Cl with LiR or, for R = CH₂Ph, with Mg(CH₂Ph)Cl. Replacement of one R group in HgR₂ by the bulky R¹ or R² group leads to a large increase in thermal stability, a marked shift in the ¹⁹⁹Hg resonance to lower frequency and an increase in the coupling constant ¹J(¹³C---¹⁹⁹Hg) for the Hg---R bond. The compound HgR²Cl does not react further with LiR² in tetrahydrofuran, but with LiR¹ gives HgR¹R²; the arrangement of the SiMe₂Ph groups in the latter in solution in CH₂C12 at low temperature appears to be different from that in the solid.     

Synthesis of Tc(IV) alcoholato complexes with methanol, ethyleneglycol and 1,2,4-butanetriol

The preparation of three Tc(IV) alcoholato complexes: K₂[⁹⁹Tc(OMe)₆], K₂[⁹⁹Tc(glyc)₃·3C₂H₅OH (H₂glyc = CH₂OHCH₂OH), and K₂[⁹⁹Tc(butri)₂]·CH₃OH (H₃butri = CH₂OHCHOHCH₂CH₂OH) is described.     

Synthesis and chemistry of the bis(trimethylsilyl)amido bis-tetrahydrofuranates of the group 2 metals magnesium, calcium, strontium and barium. X-ray crystal structures of Mg[N(SiMe3)2]2·2THF and related Mn[N(SiMe3)2]2·2THF

Transamination reactions utilizing the compound mercuric bis(trimethylsilyl)amide, Hg{N(SiMe₃)₂}₂, in tetrahydrofuran (THF), and the metals Na, Mg, Ca, Sr, Ba and Al have been investigated. Thus the THF solvated compounds Na[N(SiMe₃)₂]·THF and M[N(SiMe₃)₂]₂·2THF, M = Mg, Ca, Sr and Ba (1–4), have been prepared. The X-ray crystal structures of 1 and the related manganese compound Mn[N(SiMe₃)₂]₂·2THF (5) are reported. Interaction of the silylamides, 2–4, with a range of crown ethers apparently proceeded with elimination of silylamine, (Me₃Si)₂NH, and novel ring opening of the crown ethers, generating species containing a donor alkoxide ligand with a vinyl ether function, presumably, ---O(CH₂CH₂O)_nCH=CH₂ (n = 3−5). The silylamides 2–4 were also cleanly converted to the corresponding alkoxides (from ¹H NMR data) in reactions with stoichiometric quantities of 3-ethyl-3-pentanol.     

Analysis of pπ → dπ bonding in halogen compounds of silicon, germanium and tin

Halogen lone pair ionization potentials for the main-group IV compounds MX₄ and MH₃Cl are corrected for the effects of potencial and relaxation energy using the corresponding halogen core binding energies. The corrected data indicate significant pπ --- dπ bonding in MX₄ (for M = Si, Ge and Sn), significant repulsion between the lone pairs and CH₃ group in CH₃Cl. and little or no pπ --- dπ bonding in SiH₃Cl and GeH₃Cl.     

Anchimeric assistance in solvolysis of an organosilicon chloride and acetate

The compound (Me₃Si)₃CSiMeClI reacts with Hg(OAc)₂ in AcOH to give (Me₃Si)₂C(SiMe₂OAc)₂, under conditions in which the chloride (Me₃Si)₃CSiMe₂Cl is inert. Similarly, (Me₃Si)₂C(SiMe₂OAc)₂ reacts with CF₃CO₂H to give (Me₃Si)₂C[SiMe₂(O₂CCF₃)]₂ under conditions in which (Me₃Si)₃CSiMe₂OAc is inert. The results can be accounted for in terms of anchimeric assistance by the neighbouring acetoxy or trifluoroacetoxy group to the breaking of the Si---Cl or Si---OAc bond.     

Anchimeric assistance by γ-substituents Z, Z=MeO, PhO, MeS or PhS, in reactions of the bromides (Me3Si)2(ZMe2Si)CSiMe2Br with AgBF4

The new organosilicon bromides (Me₃Si)₂(ZMe₂Si)CSiMe₂Br with Z=PhO or MeS have been prepared and new spectroscopic data obtained for the previously reported compounds with Z=H, F, Br, Me, Ph, MeO or PhS. Competitions between pairs of bromides for a deficiency of AgBF₄ in Et₂O, with the determination of the ratio of the fluoride products by ¹⁹F-NMR spectroscopy, have led to the following approximate relative reactivities of the bromides and so to the relative abilities of the γ-Z groups to provide anchimeric assistance to the leaving of Br⁻ in this reaction: Me, 1; Ph, 40; PhO, 3400; PhS, 5000; MeS, 7000; MeO, 54 000. In methanolysis in CH₂Cl₂, (Me₃Si)₂(MeOMe₂Si)CSiMe₂Cl has been found to be roughly 120 times as reactive as (Me₃Si)₂(PhOMe₂Si)CSiMe₂Cl. Combination of the results with previously available information suggests the following approximate order of ability of γ-groups Z to provide anchimeric assistance in reactions at the Si---X bonds in compounds (Me₃Si)₂(ZMe₂Si)CSiMe₂X: OCOMe>OMe>OCOCF₃>MeS>PhS, PhO>N₃, Cl>NCS>Ph>CH=CH₂>Me.     

Methanol—hydrogen separation by capillary condensation in inorganic membranes

A NaOH-poisoned γ-alumina membrane with 4-nm diameter pores was used to separate CH₃OH from a H₂/CH₃OH mixture. Between 373 and 473 K, CH₃OH condensed in the pores for certain pressure ranges, and was preferentially removed through the pores. Separation factors as high as 600 for CH₃OH over H₂ were obtained. Capillary condensation was observed at CH₃OH pressures (0.60 ± 0.05 P^sat) much lower than those predicted by the Kelvin equation. Causes for the deviations are indicated.     

Implications of hyperconjugative effects on bond lengths of allylic systems. An NBO investigation

The influence of hyperconjugative interactions on bond lengths of some allylic compounds (H₂CCH–CH₂–M(CH₃)₃; M=C, Si, Ge) has been investigated through NBO calculations using ab initio and density functional methods. The optimized structural parameters, at the B3LYP/6-31+G(d,p) and HF/6-31+G(d,p) levels, showed a good agreement with the resonance theory. Partial geometry optimization with orbital interactions removed confirmed the observations and revealed that σ→σ* interactions, together with the more common σ→π* ones, play an important role in determining the variations in bond lengths on going from C to Ge.