Covalent immobilization of glucose oxidase onto new modified acrylonitrile copolymer/silica gel hybrid supports

New polymer/silica gel hybrid supports were prepared by coating high surface area of silica gel with modified acrylonitrile copolymer. The concentrations of the modifying agent (NaOH) and the modified polymer were varied. GOD was covalently immobilized on these hybrid supports and the relative activity and the amount of bound protein were determined. The highest relative activity and sufficient amount of bound protein of the immobilized GOD were achieved in 10% NaOH and 2% solution of modified acrylonitrile copolymer. The influence of glutaraldehyde concentration and the storage time on enzyme efficiency were examined. Glutaraldehyde concentration of 0.5% is optimal for the immobilized GOD. It was shown that the covalently bound enzyme (using 0.5% glutaraldehyde) had higher relative activity than the activity of the adsorbed enzyme. Covalently immobilized GOD with 0.5% glutaraldehyde was more stable for four months in comparison with the one immobilized on pure silica gel, hybrid support with 10% glutaraldehyde and the free enzyme. The effect of the pore size on the enzyme efficiency was studied on four types of silica gel with different pore size. Silica with large pores (CPC-Silica carrier, 375 A) presented higher relative activity than those with smaller pore size (Silica gel with 4, 40 and 100 A). The amount of bound protein was also reduced with decreasing the pore size. The effect of particle size was studied and it was found out that the smaller the particle size was, the greater the activity and the amount of immobilized enzyme were. The obtained results proved that these new polymer/silica gel hybrid supports were suitable for GOD immobilization.     

Feruloyl esterase immobilization in mesoporous silica particles and characterization in hydrolysis and transesterification

Background

Enzymes display high reactivity and selectivity under natural conditions, but may suffer from decreased efficiency in industrial applications. A strategy to address this limitation is to immobilize the enzyme. Mesoporous silica materials offer unique properties as an immobilization support, such as high surface area and tunable pore size.

Results

The performance of a commercially available feruloyl esterase, E-FAERU, immobilized on mesoporous silica by physical adsorption was evaluated for its transesterification ability. We optimized the immobilization conditions by varying the support pore size, the immobilization buffer and its pH. Maximum loading and maximum activity were achieved at different pHs (4.0 and 6.0 respectively). Selectivity, shown by the transesterification/hydrolysis products molar ratio, varied more than 3-fold depending on the reaction buffer used and its pH. Under all conditions studied, hydrolysis was the dominant activity of the enzyme. pH and water content had the greatest influence on the enzyme selectivity and activity. Determined kinetic parameters of the enzyme were obtained and showed that K_m was not affected by the immobilization but k_cat was reduced 10-fold when comparing the free and immobilized enzymes. Thermal and pH stabilities as well as the reusability were investigated. The immobilized biocatalyst retained more than 20% of its activity after ten cycles of transesterification reaction.

Conclusions

These results indicate that this enzyme is more suited for hydrolysis reactions than transesterification despite good reusability. Furthermore, it was found that the immobilization conditions are crucial for optimal enzyme activity as they can alter the enzyme performance.

     

漆酶在纳米多孔金上的固定化及其酶学性质研究

利用纳米材料为载体对酶等生物大分子进行固定化近年来引起人们的浓厚兴趣. 以Au/Ag合金为原料, 通过控制浓硝酸的腐蚀时间再辅以退火处理得到了不同孔径的纳米多孔金(NPG), 利用扫描电镜(SEM)和N2气体吸附仪对孔性质进行了表征. 以NPG为载体, 用α-硫辛酸和N-乙基-N’-(3-二甲基氨基丙基)碳酰二亚胺/N-羟基琥珀酰亚胺(EDC/NHS)对金表面进行活化, 通过化学共价偶联的方法对产自Trametes versicolor的漆酶进行了固定化. 比较了孔径大小对酶固定化量及比活力的影响. 发现小孔径更有利于对该漆酶的固定化. 与游离酶相比, 固定化酶的最适pH没有改变, 但最适温度却从原来的40 ℃升到了60 ℃. 固定化后, 漆酶的pH和热稳定性都明显提高了. 重复使用8次仍能保持初始活力的65%, 且在4 ℃下保存1个月几乎观察不到酶活力的下降. 此外, 失活的固定化酶经浓硝酸处理后, NPG载体可重复利用. 本结果初步显示出了NPG在生物技术领域中的应用潜力.     

介孔材料MCFs的合成及组装青霉素酰化酶的性质研究

介孔材料由于具有纳米级规则孔道和巨大的比表面积而在催化、吸附及分离等方面存在较大的应用价值．近年来,由介孔分子筛如MCM-41和SBA-15州等组装功能性材料已成为研究的热点．酶作为高效催化剂有许多优点,但在溶液中易失活,使用后无法回收,有的酶在溶液中还存在自水解问题：将酶组装在介孔材料中制成固定化酶则可解决上述问题．目前已成功地将辣根过氧化物酶     

Synthesis of SBA-15 from low cost silica precursor obtained from sugarcane leaf ash and its application as a support matrix for lipase in biodiesel production

Ordered mesoporous silica material was synthesized from a low-cost precursor, sugarcane leaf ash, was used as a support matrix for lipase for the production of biodiesel. The mesoporous samples were characterized using Fourier transform infra red spectroscopy. The surface topography and morphology of the mesoporous materials were studied using scanning electron microscope. The pore diameter, pore volume, Brunauer Emmett and Teller surface area of the mesoporous material were determined by N₂ gas adsorption technique. Different pore size Santa Barbara Acid-15 (SBA-15) samples were synthesized and their lipase immobilization capacity and specific enzyme activity of immobilization lipase were determined and compared. Lipase from Candida Antarctica immobilized on SBA-15 (C) had shown maximum percentage immobilization and specific enzyme activity. The immobilized lipase mesoporous matrix was used for biodiesel production from crude non-edible Calophyllum inophyllum oil. The percentage yield of fatty acid methyl ester, 97.6 % was obtained under optimized conditions: 100 mg of lipase immobilized on SBA-15, 6:1 methanol to oil molar ratio, the reaction of 2 g C. inophyllum oil with methanol.     

不同介孔材料固定青霉素酰化酶的稳定性研究

介孔材料由于具有在2～30nm之间可调的纳米级规则孔道、大比表面积和强吸附性能而成为固定化酶的优良载体．将酶固定于介孔材料的孔道中制备成的固定化酶与溶液酶相比,有易于与产物分离,并可回收和反复使用,可降低生产成本,减少酶的自水解和保持酶的活性．青霉素酰化酶（Penicillin acylase,PGA,EC．3．5．1．11）又称为青霉素酰胺酶或青霉素氨基水解酶,该酶属于球蛋白,分子量较大,由2个亚基组成：分子量为19500的含有侧链结合位点的亚基和分子量为60000的含有催化位点的亚基．     

Stabilization and reutilization ofBacillus megaterium glucose dehydrogenase by immobilization

Glucose dehydrogenase (GDH) fromBacillus megaterium was immobilized using aminopropyl controlled-pore silica (CPS, average pore sizes of 170 and 500 Å) as a support and glutaraldehyde as a bifunctional crosslinking agent. The CPS-immobilized enzyme could be reused 12 times and the best results were obtained using aminopropyl CPS-500 and bovine serum albumin as a feeder for stabilizing the protein layer on the support. DEAE-Sephadex (A-25 and A-50) was also used as a support for immobilizing GDH, with yields of around 42% for A-25 and 25–30% for A-50. The effect of pH on the immobilization procedure showed pH 6.5 to be better than pH 7.5 with respect to the recovery of enzyme activity. Both preparations of DEAE-Sephadex immobilized GDH could be reused several times and were thermostable at 40°C for 7 h. The kinetic parameters as Michaelis constant and maximum rate were determined for the immobilized enzyme and compared with those for the freeform.

     

铈基介孔金属有机骨架固定化酶的构建及催化性能

金属有机骨架(MOF)材料由于其孔隙率高、比表面积大以及具有发达的内联通孔道结构等优点,可以作为优良的生物分子固定化载体。通过表面活性自组装策略制备了铈基介孔MOF(Ce-MOF-F),表征结果表明,该材料有大的比表面积和呈辐射状的介孔孔道结构。以其为载体、南极假丝酵母脂肪酶B(CALB)为模型酶,通过物理吸附法制备了生物催化剂CALB@Ce-MOF-F,对该固定化酶的酶载量和催化性能进行了研究。在优化条件下,CALB的负载量为162.0mg/g载体,水解活性为899.1U/g蛋白。与游离CALB相比,CALB@Ce-MOF-F表现出对高温、酸碱和有机溶剂等有更强的耐受性;将Ce-MOF-F用于多种酶的固定化,研究其作为载体的普适性,结果表明,介孔Ce-MOF-F对洋葱伯克氏菌脂肪酶(BCL)和漆酶有良好的固定效果,可以作为良好载体,并能对酶起到较好的保护作用。     

Enzymes immobilized in mesoporous silica: A physical–chemical perspective

Mesoporous materials as support for immobilized enzymes have been explored extensively during the last two decades, primarily not only for biocatalysis applications, but also for biosensing, biofuels and enzyme-controlled drug delivery. The activity of the immobilized enzymes inside the pores is often different compared to that of the free enzymes, and an important challenge is to understand how the immobilization affects the enzymes in order to design immobilization conditions that lead to optimal enzyme activity. This review summarizes methods that can be used to understand how material properties can be linked to changes in enzyme activity. Real-time monitoring of the immobilization process and techniques that demonstrate that the enzymes are located inside the pores is discussed by contrasting them to the common practice of indirectly measuring the depletion of the protein concentration or enzyme activity in the surrounding bulk phase. We propose that pore filling (pore volume fraction occupied by proteins) is the best standard for comparing the amount of immobilized enzymes at the molecular level, and present equations to calculate pore filling from the more commonly reported immobilized mass. Methods to detect changes in enzyme structure upon immobilization and to study the microenvironment inside the pores are discussed in detail. Combining the knowledge generated from these methodologies should aid in rationally designing biocatalyst based on enzymes immobilized in mesoporous materials.     

聚脲多孔材料的简单制备及在酶固定和手性拆分中的应用

以甲苯二异氰酸酯(TDI)为单体,在水与丙酮混合溶剂中通过沉淀聚合一步法制备了富含胺基的聚脲多孔材料(PPU),通过扫描电镜和压汞法对其表面形貌和孔结构进行了表征.PPU经戊二醛(GA)活化后用于荧光假单胞菌脂肪酶(PFL)的固定,考察了GA活化过程中GA浓度对酶固定量及固定酶活性的影响.结果表明,PPU是一种粒子尺寸分布在30~50μm范围的形状不规则的多孔粒子,孔径在2 nm~100μm之间呈连续分布.在pH=8.0的缓冲溶液中用0.17 mol/L的GA对PPU进行改性,将改性后的PPU用于PFL的固定,当酶溶液浓度为2.56 mg/m L时,得到酶的最大固定量为95.2 mg/g,固定酶的活性为375 U/mg,相对活性为76%.将此固定酶作为催化剂,用于1-苯乙醇外消旋化合物的手性拆分,并与游离酶催化的结果相比较.结果表明,固定酶的反应活性和立体选择性都明显优于游离酶.通过沉淀聚合制备的聚脲多孔材料在酶固定及手性分子拆分方面具有应用前景.     

Improved Covalent Immobilization of Horseradish Peroxidase on Macroporous Glycidyl Methacrylate-Based Copolymers

A macroporous copolymer of glycidyl methacrylate and ethylene glycol dimethacrylate, poly(GMA-co-EGDMA), with various surface characteristics and mean pore size diameters ranging from 44 to 200 nm was synthesized, modified with 1,2-diaminoethane, and tested as a carrier for immobilization of horseradish peroxidase (HRP) by two covalent methods, glutaraldehyde and periodate. The highest specific activity of around 35 U g^?1 dry weight of carrier was achieved on poly(GMA-co-EGDMA) copolymers with mean pore diameters of 200 and 120 nm by the periodate method. A study of deactivation kinetics at 65 °C and in 80 % dioxane revealed that periodate immobilization also produced an appreciable stabilization of the biocatalyst, while stabilization factor depended strongly on the surface characteristics of the copolymers. HRP immobilized on copolymer with a mean pore diameter of 120 nm by periodate method showing not only the highest specific activity but also good stability was further characterized. It appeared that the immobilization resulted in the stabilization of enzyme over a broader pH range while the Michaelis constant value (K _m) of the immobilized HRP was 10.8 mM, approximately 5.6 times higher than that of the free enzyme. After 6 cycles of repeated use in a batch reactor for pyrogallol oxidation, the immobilized HRP retained 45 % of its original activity.     

乙烯基Ia3d介孔硅分子筛的环氧化及其固定化青霉素酰化酶(英文)

采用直接共聚法合成表面含有乙烯基的具有立方相Ia3d结构的介孔硅分子筛(V-ClMS),然后对乙烯基团进行环氧化制备得到表面环氧基功能化的介孔硅分子筛(E-CIMS),采用X射线衍射、N2吸附-脱附、透射电镜、热重分析和13C固体核磁共振对制备的介孔硅分子筛进行了表征.结果表明,表面含有乙烯基的V-ClMS介孔硅分子筛能被一步成功合成,并易于发生环氧化而获得表面环氧基功能化的E-CIMS介孔硅分子筛.将E-CIMS介孔硅分子筛作为载体用于固定化青霉素G酰化酶(PGA),研究了表面环氧基团对固定化PGA初活性和操作稳定性的影响.结果表明,随着表面环氧基团数量的增加,介孔硅分子筛孔径减小,表面疏水性增加,导致载酶量和初活性减小.但介孔硅分子筛表面适量的环氧基团能增强E-CIMS介孔硅分子筛与PGA之间的相互作用,从而提高固定化PGA的操作稳定性.     

Direct introduction of amine groups into cellulosic paper for covalent immobilization of tyrosinase: support characterization and enzyme properties

Tyrosinase is used to eliminate phenolic compounds from wastewater. Therefore, its immobilization is important to enhance catalytic efficiency. Papery materials are of particular interest for use as support for enzyme immobilization since the porous microstructure of fiber networks in papers can provide a suitable reaction environment, especially in flow-type catalytic reactions. However, immobilization of protein onto papery structure needs chemical modifications in severe conditions. To overcome this challenge, a cellulosic paper was directly amine-functionalized in moderate conditions and used for tyrosinase immobilization. The support was pretreated with HCl (0.5 N) solution and then sequentially immersed in ethylenediamine (EDA), glutaraldehyde solution (2% v/v) and the crude enzyme. In comparison with the untreated one, the immobilized enzyme on the EDA-treated support offered a 3.7-fold increase in activity. The FTIR spectra as well as EDX analysis proved the presence of amine groups in the cellulosic paper and also covalent immobilization of tyrosinase on the modified support. When considering the effect of pH on the activity at 25 °C, a maximum relative activity of 134% at pH 6 was revealed. Similarly, evaluating the effect of temperature on the activity at pH 7 displayed a maximum relative activity of 152% at 35 °C. The immobilized enzyme was suitable for use for more than four cycles to degrade a phenolic compound at severe pH and temperature conditions. Additionally, the immobilized enzyme was active after treatment of the surface at different pHs and temperatures for 105 min. The chemically modified cellulosic paper can be used as a support for enzyme immobilization.     

青霉素酰化酶在含铁MCM-41介孔分子筛上的固定化研究

制备了具有长程有序结构、孔径分布狭窄的含铁MCM-41介孔分子筛，利用直接法和共价结合法将青霉素酰化酶固定在分子筛表面。结果表明，两种方法制备的固定化酶对青霉素G水解反应的表观活性分别为782U/g和256U／g；经6次连续操作使用，二者保持初始活性的49．4％和81．2％，后者的操作稳定性好于前者。共价结合法制备的固定化酶活性较低，是由于Fe—MCM-41表面修饰后比表面积和孔径明显减小所致。     

Man-tailored cellulose-based carriers for invertase immobilization

Cellulose-based carriers Granocel were specially prepared and optimised for covalent immobilization of enzymes. The effects of carrier characteristics such as pore size, chemistry of anchor groups and their density on invertase immobilization efficiency were evaluated. It was found that the preferential adsorption/binding of the enzyme to a carrier during coupling and its activity after immobilization depended on microenvironmental effects created by hydrophilic surface of the carrier, functional groups and their activators. The best preparations (activity approx. 300 U/mL, high storage stability) were obtained for NH₂-Granocel activated with glutaraldehyde. It is probably due to Granocel modification with pentaethylenehexamine that gave a 19-atom spacer arm. The enzyme concentration in coupling mixture was optimised as well. The kinetic parameters of sucrose hydrolysis for native and immobilized invertase were evaluated. Compared to the native invertase, K _m value of immobilized enzyme was only twice higher with about three times lower substrate inhibition. Reaction runs in a well mixed batch reactors with native and immobilized invertase showed slightly slower reaction rate in the case of the enzyme covalently bound to Granocel. Very good stability of cellulose-based carrier was proved experimentally by 20 successive reaction runs in a batch reactor.     

基于多级孔金属有机骨架构筑HRP固定化酶反应器及其染料降解应用

以不稳定的Cu-金属有机骨架(Cu-MOF)为模板剂, 利用自组装模板法制备多级孔Zr-MOF, 再通过物理吸附法在多级孔Zr-MOF的介孔孔道中负载辣根过氧化物酶(HRP)构筑了HRP@Zr-MOF固定化酶反应器. 通过改变孔径调节剂苯甲酸(HBC)的浓度调控孔径大小, 研究了孔径对固定化酶反应器催化活性的影响; 考察了固定化体系缓冲溶液pH值、 固定化时间及温度对固定效果的影响. 以HRP催化降解结晶紫染料为模型反应, 探讨了HRP@Zr-MOF的操作稳定性和重复使用性. 结果表明, pH=3.0、 固定化时间为60 min、 固定化温度为30 ℃是固定化HRP的最佳条件, 固载量最高可达61.6 mg/g. 与游离酶相比, HRP@Zr-MOF固定化酶反应器表现出更好的热稳定性、 酸碱稳定性、 H₂O₂稳定性和储存稳定性; 重复使用10次后, HRP@Zr-MOF的催化活性仍能保持62.3%. 将HRP@Zr-MOF应用于实际水样中结晶紫染料的催化降解, 在5 min内降解率高达90%以上, 表现出非常高效的催化效率.     

Immobilization of endo-1,4-β-xylanase on polysulfone acrylate membranes: Synthesis and characterization

We report on a new enzyme/support system to immobilize proteins such as enzymes through a covalent bond on polysulfone membranes. In the present case the enzyme endo-1,4-β-xylanase (E.C.3.2.1.8) is attached to polysulfone previously derivatized by introducing an acrylate group. Membranes are properly prepared from this polysulfone acrylate. Afterwards the enzyme is immobilized though the amino groups of side chains of the amino acids of the enzyme and the acrylate group of the derivatized polysulfone. Such immobilization of the enzyme is confirmed by microelemental analysis as well as by amino acid analysis by HPLC. Moreover, the enzymatic activity of the membranes was evaluated and compared with that corresponding to the free enzyme. Certain physical parameters (asymmetry, irregularity, pore size and surface roughness) of the corresponding enzymatic membranes were obtained from SEM and AFM image interpretation.     

含环氧基亲水性固定化青霉素酰化酶共聚载体的合成与性能研究

环氧基团可以在温和条件下与酶分子的氨基反应使其固定于载体表面.选用含有活性环氧基团的甲基丙烯酸缩水甘油酯(GMA)和亲水性的N-乙烯吡咯烷酮(NVP)两种单体,以N,N′-亚甲基双丙烯酰胺(MBAA)为交联剂,甲醇水溶液作致孔剂,液体石蜡为主介质,通过反相悬浮聚合技术成功地合成了亲水性大孔GMA-NVP-MBAA三元共聚物载体(GNM).通过调节交联剂的用量和单体NVP与GMA的比例,可以调节载体的孔径、比表面积及在水中的溶胀性能.将巨大芽孢杆菌青霉素酰化酶共价偶联于平均孔径为16.5nm、表面环氧基含量为0.906mmol/g的GNM共聚物载体,制成固定化酰化酶,其表观活性高达625U/g,水解青霉素G钾盐的最适宜温度为50℃,pH值为8.0.固定化酶在4℃保存40d,活性保持不变.经3次使用后,活性达到稳定值(601U/g左右),再经12次使用,活性几乎保持不变.     

漆酶在纳米金溶胶/多重壁碳纳米管复合载体上固定方法的比较及粒子尺寸效应

以纳米金溶胶（NGS）和多重壁碳纳米管（MWCNTs）的共混物(NGS/MWCNTs)作为固定漆酶的载体,研究了3种固定漆酶方法在酶固定量、比活力上的差异。 研究了不同的固定方法对固定酶热稳定性和重复使用性及纳米金溶胶颗粒粒径对酶固定量和固定酶动力学参数的影响。 实验结果表明,NGS/MWCNTs具有良好的固定漆酶能力和高固酶比活力,NGS/MWCNTs（NGS粒径37 nm）通过简单物理吸附法固定漆酶的量和固酶的比活力最高,分别可达33.80 mg/g和9.433 U/mg。 在NGS-MWCNTs上采用化学键合方法固定的漆酶在70 ℃放置2 h后仍然保持初始活力的75％,重复使用20次后仍保持初始活力的70％。 纳米金溶胶粒子越小（24 nm）,底物和固定漆酶间亲和力越好（KM=0.027 mmol/L）,表观速率常数越大。     

A General Strategy for Site‐Directed Enzyme Immobilization by Using NiO Nanoparticle Decorated Mesoporous Silica

Mesoporous materials have recently gained much attention owing to their large surface area, narrow pore size distribution, and superior pore structure. These materials have been demonstrated as excellent solid supports for immobilization of a variety of proteins and enzymes for their potential applications as biocatalysts in the chemical and pharmaceutical industries. However, the lack of efficient and reproducible methods for immobilization has limited the activity and recyclability of these biocatalysts. Furthermore, the biocatalysts are usually not robust owing to their rapid denaturation in bulk solvents. To solve these problems, we designed a novel hybrid material system, mesoporous silica immobilized with NiO nanoparticles (SBA‐NiO), wherein enzyme immobilization is directed to specific sites on the pore surface of the material. This yielded the biocatalytic species with higher activity than free enzyme in solution. These biocatalytic species are recyclable with minimal loss of activity after several cycles, demonstrating an advantage over free enzymes.