三苯基吡啶-芴交替共轭聚合物的合成与光致发光性能研究

通过Suzuki偶合反应得到了两种间位连接的三苯基吡啶同分异构体和9,9-二辛基芴的交替共聚物PFOTPP1和PFOTPP2.并对它们的紫外-可见吸收光谱、光致发光光谱以及电化学性能等进行了初步研究.结果表明,将间位连接的三苯基吡啶基引入聚芴主链能使聚合物的LUMO能级降低,光致发光光谱发生蓝移,得到了两种有望应用于电致炼光发光器件的共轭聚合物蓝光发光材料.     

聚芴基苯并唑类共聚物的合成和光物理性能

通过溶液缩聚法合成了一系列不同组分的无规共聚物--聚对苯撑苯并二噁唑-co-聚(9,9-二辛基芴苯并二噁唑)(PBO-co-PBOF).利用X射线衍射、紫外-可见光吸收光谱、光致荧光光谱研究了不同组分和结构变化对聚合物形态和光物理性能的影响.结果表明:聚合物主链上辛基芴基团的引入使聚合物结构从晶态转变为非晶态.共聚物分...     

侧链接枝低聚对亚苯基亚乙烯基聚芴衍生物的合成及其电致发光性能

采用Wittig-Horner反应,将少量端基为磷脂的黄光发射客体低聚对亚苯基亚乙烯基链段(MOPV)接枝到含有醛基单体的蓝光发射主体材料聚芴的侧链上,合成了一种新型的接枝聚芴衍生物PF-g-MOPV.这种接枝聚合物具有很好的热稳定性,可溶于常用的有机溶剂.以接枝共聚物PF-g-MOPV为发光层的单层器件发射出黄绿光,色坐标为(0.30,0.57),最大发光亮度达到1550cm/m2,这说明蓝光聚芴主链向侧链MOPV进行了有效地能量转移.     

芴与噻吩发光共聚物的合成及其电致发光性能

采用Suzuki偶合方法合成出了一系列新型的 9,9 二辛基芴 (DOF)和噻吩 (Th)的共聚物 .其中 ,DOF与Th的投料比 (摩尔比 )分别为 95∶5 (PTF5 )、90∶1 0 (PTF1 0 )、85∶1 5 (PTF1 5 )、70∶3 0 (PTF3 0 )、5 0∶5 0 (PTF5 0 ) .所有的聚合物均可溶于常用的有机溶剂 ,如THF,CHCl3等 ,其分子量在 60 0 0～ 5 3 0 0 0之间 .当在聚芴主链中引入噻吩后 ,其发光波长发生了红移 ,最大发光波长由PTF5时的 490nm红移到PTF5 0时的 5 41nm .随着聚芴主链中噻吩含量的增加 ,最大电致发光和光致发光效率都逐渐降低 由这些聚合物所制得的器件 ,最大电致发光效率为PTF5和PTF1 0的 0 45 %.由此表明 ,在聚芴主链中引入少量的低带隙单体噻吩可以调节聚芴的发光颜色及发光效率     

主链含酞和芴结构的无定形聚芳醚酮的合成

通过共聚改性在酚酞聚芳醚酮(PEK-C)的主链上引入含芴侧基,制备了一系列主链含酞和芴结构的线性高分子量无定形聚芳醚酮无规共聚物.通过傅里叶红外光谱(FTIR)、核磁共振谱(1H,13C NMR)等手段确定了共聚物结构.凝胶渗透色谱(GPC)数据表明,共聚物的Mn>6.0×104,Mw>1.0×105,PDI(Mw/Mn)范围在1.6~1.7之间.X射线衍射(XRD)数据表明共聚物系无定形结构,差示扫描量热法(DSC)和热重分析(TGA)测试表明聚合物具有良好的耐热性;初始热分解温度高于467℃;700℃时残炭率大于58.9%;共聚物呈现单一的玻璃化转变温度(Tg>243℃).当酚酞与双酚芴摩尔比在3∶7~5∶5范围时,共聚物的弹性模量和断裂伸长率显著提高,可分别达到3.1 GPa和58%,是酚酞聚芳醚酮的1.4倍和8.3倍.这类含酞和芴侧基的无定形聚芳醚酮保持了在氯仿、二氯甲烷、四氢呋喃(THF)和甲基吡咯烷酮(NMP)等极性非质子溶剂中良好的溶解性能,并显著提高了聚合物的力学性能和热性能.     

电致蓝光芴取代聚芴的合成与光谱稳定性

为了筛选高效稳定的聚合物电致蓝光材料, 设计合成了三苯胺和芴取代的二芳基芴单体, 并通过Suzuki缩聚合成了交替共聚物TPAFF-co-F和TPAFF-co-P. 将二辛基芴引入聚芴的9位可以增加其溶解度, 同时具有屏蔽主链和减少主链芴9位被氧化的作用, 三苯胺基团将有利于提高空穴在阳极界面的注入能力. 200 ℃下空气中退火24 h实验表明, 在相同条件下, 绿光指数(Igreen/Iblue)顺序为聚(9,9-二辛基芴)(1.07)>TPAFF-co-F(0.65)>TPAFF-co-P (0.47), 证明了烷基芴引入减少了主链氧化的几率. 还制作了发光二极管器件, 其结构为ITO/PEDOT:PSS(40 nm)/TPAFF-co-F或TPAFF-co-P(80 nm)/Ba(4 nm)/Al(120 nm). 在高电流密度下它们保持了良好的光谱稳定性, 在547 mA·cm-2电流密度下, TPAFF-co-F的CIE(国际发光照明委员会)坐标为(0.22, 0.24), TPAFF-co-P的CIE坐标为(0.24, 0.26), 后者的电流效率为0.712 cd·A-1.     

三苯胺-芴类共聚物的合成及发光性能

在主链上嵌入三苯胺基团来改善聚芴的空穴传输能力、平衡载流子的注入是目前改善聚芴材料发光效率的一种好方法。本文用Suzuki缩聚法合成了芴-三苯胺类共聚物。实验结果表明．在聚芴主链上引入少量的TPA(10％～20％)时．不仅提高了EL效率．而且可以改善光谱的色纯度。TPA含量为20％时,共聚物的EL效率为1．28％。     

含电子给体-受体的交叉共轭聚合物合成及其离子传感性能

在芴苯结构主链中引入苯并噻唑作为电子受体、侧链上引入N,N-二丁基苯胺作为电子给体,通过Suzuki反应制备了新型交叉共轭聚合物P1,同时合成主链中不含苯并噻唑的芴苯类共聚物P2作为对比;对两者的化学结构和光物理性质进行了表征,并研究了聚合物对离子的光学传感性能.实验和模拟计算结果均表明,P1中存在着强的分子内电荷转移效应;引入电子给体和受体(D-A)能够有效地调控交叉共轭聚合物的光学特性,这种D-A型交叉共轭聚合物是一类潜在的具有荧光增强性能的化学传感材料.     

氧化偶联共聚合制备主链含β-萘烷基醚的红色发光聚合物

用氧化偶联聚合法合成了主链上含β-萘烷基醚和吡啶、二烷基芴、二苯乙烯和均四甲苯的聚合物.用FT-IR和1H NMR表征了聚合物的结构.广角X射线衍射表明共聚物的结构都是非晶态的.用UV-V is表征了共聚物的吸收特征.聚合物的荧光光谱表明,含有β-萘烷基醚和吡啶的聚合物在溶液中表现为红光发射材料.含有β-萘甲醚和二苯乙烯的共聚物为黄橙光发射,通过改变单体含量也可实现红光发射.含有β-萘甲醚和二烷基芴的聚合物固体有望成为白光发射材料.     

主链含冠醚的聚对亚苯基亚乙烯基类发光共聚物的合成与性能研究

将冠醚引入到聚合物骨架上合成了一种聚合物分子主链上同时带有离子传导与电子传导链段的聚对亚苯基亚乙烯基功能性发光共聚物DB PV ,采用FT IR、1 H NMR、DSC、元素分析等手段对共聚物进行了表征 ,测定了共聚物的氯仿溶液和其膜的紫外吸收及其光致发光行为 .结果表明DB PV可溶于氯仿、吡啶等有机溶剂 ,具有良好的溶解成膜性与加工性能 ,是一种较理想的功能性蓝色发光材料     

Phenothiazine‐S,S‐dioxide‐ and fluorene‐based light‐emitting polymers: Introduction of e−‐deficient S,S‐dioxide into e−‐rich phenothiazine

A novel series of poly(10‐hexyl‐phenothiazine‐S,S‐dioxide‐3,7‐diyl) and poly(9,9′‐dioctyl‐fluorene‐2,7‐diyl‐alt‐10‐hexyl‐3,7‐phenothiazine‐S,S‐dioxide) (PFPTZ‐SS) compounds were synthesized through Ni(0)‐mediated Yamamoto polymerization and Pd(II)‐catalyzed Suzuki polymerization. The synthesized polymers were characterized by ¹H NMR spectroscopy and elemental analysis and showed higher glass transition temperatures than that of pristine polyfluorene. In terms of photoluminescence (PL), the PFPTZ‐SS compounds were highly fluorescent with bright blue emissions in the solid state. Light‐emitting devices were fabricated with these polymers in an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/polymer/Ca/Al configuration. The electroluminescence (EL) of the copolymers differed from the PL characteristics: the EL device exhibited a redshifted greenish‐blue emission in contrast to the blue emission observed in the PL. Additionally, this unique phenothiazine‐S,S‐dioxide property, triggered by the introduction of an electron‐deficient SO₂ unit into the electron‐rich phenothiazine, gave rise to improvements in the brightness, maximum luminescence intensity, and quantum efficiency of the EL devices fabricated with PFPTZ‐SS. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1236–1246, 2007     

Synthesis and characterization of novel germanium‐containing poly(p‐phenylenevinylene) derivatives

Novel blue‐emitting germanium‐containing poly(p‐phenylenevinylene) (PPV) derivatives with well‐defined conjugation lengths were synthesized via Wittig‐condensation polymerizations. The polymers can be color‐tuned by the introduction of various chromophores into the PPV‐based polymer backbones. The photoluminescence (PL) spectra of the polymers, GePVK (containing carbazole moieties), GeMEH (containing dialkoxybenzene moieties), and GePTH (containing phenothiazine moieties), were found to exhibit blue, greenish blue, and green emissions, respectively. GePTH produces more red‐shifted emission than GeMEH and GEPVK, resulting in green emission, and the solution and solid state PL spectra of GePVK consist of almost blue emission. The electroluminescence spectra of GeMEH and GePTH contain yellowy green and yellow colors, respectively. Interestingly, GePVK exhibits white emission with CIE coordinates of (0.33, 0.37) due to electroplex emission in the light‐emitting diodes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 979–988, 2008     

聚芴主链含D-A型萘并噻二唑和苯并硒二唑衍生物的红光高分子发光材料

设计合成了新型的含萘并噻二唑（NT）或苯并硒二唑（BS）电子受体单元的D-A型红光掺杂剂,将它们引入到聚芴(PFO)的主链,调节掺杂剂含量,合成了一系列具有“掺杂剂/主体”特性的红光高分子材料含萘并噻二唑衍生物的聚芴(PFR-xNT)和含苯并硒二唑衍生物的取芴(PFR-xBS)。 这些红光高分子的吸收光谱主要表现为聚芴主体的吸收,荧光光谱既有主体聚芴的蓝光峰,也有掺杂剂的红光峰,并且红光峰的相对强度随着掺杂剂含量的增加而增强。 与光致发光光谱不同,这些高分子的电致发光光谱主要表现为掺杂剂的红光发射,并在掺杂的摩尔分数达到1%时实现了主体聚芴向红光掺杂剂的完全能量转移。 其中PFR-10NT和PFR-10BS的单层器件(ITO/PEDOT:PSS/Polymer/Ca/Al)(PEDOT:聚3,4-乙烯二氧噻吩;PSS:聚苯乙烯磺酸)分别实现了电流效率1.61 cd/A,最大发射波长632 nm,CIE色坐标（0.63,0.35）以及电流效率1.10 cd/A,最大发射波长620 nm,CIE色坐标（0.63,0.36）的高效红光发射。     

NOVEL RED LIGHT-EMITTING POLYMERS BASED ON 2,7-CARBAZOLE AND THIOPHENE DERIVATIVES

A series of conjugated copolymers derived from 9-ethylhexyl-2,7-carbazole(Cz)and 4,7-di(4-hexylthien-2-yl)- 2,1,3-benzothiadiazole(DHTBT)was synthesized by Suzuki polycondensation.The photo-and electro-luminescent properties of these polymers were investigated.Efficient energy transfer from the Cz segment to the DHTBT unit occurs even if the DHTBT content as low as 1 mol%.PL emission was red-shifted significantly from 645 nm to 700 nm with the increase in DHTBT content by 1-50 mol%.PL efficiencies decrea...     

Highly efficient and stable blue‐light‐emitting binaphthol‐fluorene copolymers: A joint experimental and theoretical study of the main‐chain chirality

In a quest for the main‐chain chiral and highly stable blue‐light‐emitting π‐conjugated polymers, a novel series of soluble conjugated random and alternating copolymers (PF‐BN) derived from fluorene and axially chiral 1,1′‐binaphthol (BINOL) were successfully synthesized by Suzuki coupling polymerization. The polymer structures, optical properties, and their electrochemical properties were investigated by ¹H NMR, TGA/DSC, UV‐Vis absorption, photoluminescence, cyclic voltammetry, circular dichroism spectroscopy, and DFT calculations. The blue‐light‐emitting BINOL‐containing copolymers with proper content of BINOL show highly efficient photoluminescence and ultra highly stable light‐emission with almost unchanged fluorescent spectra after annealing at 200 °C in air for 10 h. The joint experimental and theoretical study of the main‐chain chirality reveals that (1) the chirality of BINOL can be transferred to the polymer backbone, (2) the effective conjugation length is about one BINOL and three fluorenes, (3) the main active chiral block in the copolymers is probably composed by one BINOL with the other two or three fluorenes, and (4) the dihedral angle in the PF‐BN copolymers should be larger than 105°. The incorporation of BINOL into the polyfluorene backbone is an effective way to produce highly efficient and stable blue‐light‐emitting main‐chain chiral conjugated polymer with interesting optoelectronic properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3868–3879, 2010     

FLUORENE-BASED LIGHT-EMITTING POLYMERS

Several series of fluorene-based light-emitting polymers with the emphasis on achieving efficient and stable bluelight emission are reported. Spiro-functionalization may narrow the emission spectra (with smaller tail at Ionger wavelengths)of fluorene homopolymers to provide purer blue emission. The thermal spectral stability of the polymers could also beimproved because of the elevation of the glass transition temperature caused by the spiro-functionalization. However, theexcimer emission in fluorene homopolymers is not suppressed by the spiro-functionalization. Alternate copolymers of 9,9-dihexylfluorene and substituted phenylenes may emit efficient blue ligh both in solution and in film. The optical propertiesare dependent on the substituion on the phenylene ring. The alkoxy-substituted polymers displayed efficient PL and EL andgood thermal spectral stability. The HOMO and LUMO energy levels of the polymers based on the backbone structure couldbe tuned in a wide range by attaching different functional groups on the phenylene ring. By attaching europium(III) complexat the ends of the side chains in the alternate copolymers, we have demonstrated a new approach to achieving red emissionwith a very narrow spectrum. The copolymers of 9,9-dihexylfluorene and thiophene and bithiophene with differentsubstitutions were also synthesized to study the effect of substitution and regioregularity on the optical and other physicalproperties of the polymers.     

Investigating side chain mediated electroluminescence from carbazole-modified polyfluorene

In molecular design of electroluminescent (EL) conjugated polymers, introducing a charge transport moiety on a side chain is found to be a promising method for balancing electron and hole fluxes in EL devices without changing the emitting color if there is no interaction between moiety and main chain. In the case of grafting a carbazole (Cz) moiety (hole transporting) on blue emitting polyfluorene, a green emission appears with intensity comparable to the blue emission, which was attributed to a possible interaction between main chain and Cz as previously reported by us. Here, a detailed study of its EL mechanism was carried out by means of time-resolved EL with the assistance of molecular simulation and thermally stimulated current measurements; exploration of how main chain segments interact with the transport moiety was performed. We found the Cz groups in Cz100PF play multiple roles: they act as (1) hole transporter to improve hole injection, (2) hole trapping site for efficient electron-hole recombination to yield blue-emitting excitons, and (3) source of green emission from electroplex formed via electric field-mediated interaction of the Cz/Cz radical cation with an electron in the nearby PF backbone. In combination, these observations suggest that integrated consideration for both intramolecular and intermolecular interactions provides a new route of molecular design of efficient EL polymers.     

蓝色磷光材料FIrpic的发光特性

研究了掺杂浓度及热退火对磷光材料双(4,6-二氟苯基吡啶-N,C2?)吡啶甲酰合铱(FIrpic)发光性能的影响.不同掺杂浓度的薄膜及有机电致发光器件(OELDs)的发光颜色都随FIrpic浓度的增大由蓝色逐渐变化到黄绿色.纯FIrpic薄膜的吸收光谱和光致发光(PL)光谱在440-480nm范围内有明显的光谱重叠,476nm处的发光强度随FIrpic掺杂浓度增大而降低主要是由自吸收效应引起的.测量了不同激发密度下的光致发光光谱和不同掺杂浓度下的电致发光(EL)光谱,发现530nm处的发光强度随激发强度或掺杂浓度的增大而增强,证实了530nm处的发光是来源于FIrpic分子间的激基缔合物发光.通过比较热退火前后薄膜微观形貌及电致发光器件光谱的变化,进一步证实了热退火促进FIrpic分子聚集,增强了FIrpic分子间的辐射跃迁发光.通过调控FIrpic掺杂浓度和优化器件结构,并对器件进行热退火处理得到一系列发光颜色从蓝色逐渐变化到黄绿色的有机电致发光器件.     

Carbazolevinylene‐based polymers and model compounds with oxadiazole and triphenylamine segments: Synthesis,photophysics, and electroluminescence

Two new soluble alternating carbazolevinylene‐based polymers POXD and PTPA as well as the corresponding model compounds MOXD and MTPA were synthesized by Heck coupling. POXD and MOXD contained 2,5‐diphenyloxadiazole segments, while PTPA and MTPA contained triphenylamine segments. All samples displayed high thermal stability. The polymers had higher glass transition temperature (T_g) than their corresponding model compounds. The samples showed absorption maximum at 364–403 nm with optical band gap of 2.62–2.82 eV. They emitted blue‐green light with photoluminescence (PL) emission maximum at 450–501 nm and PL quantum yields in THF solution of 0.15–0.36. The absorption and the PL emission maxima of PTPA and MTPA were blue‐shifted as compared to those of POXD and MOXD . The electroluminescence (EL) spectra of multilayered devices made using four materials exhibited bluish green emissions, which is well consistent with PL spectra. The EL devices made using poly(vinyl carbazole) doped with MOXD and MTPA as emitting materials showed luminances of 12.1 and 4.8 cd m^?2. POXD and PTPA exhibited 25.4, and 96.3 cd m^?2, respectively. The polymer containing the corresponding molecules in the repeating group showed much higher device performances. Additionally, POXD and MOXD exhibited better stability of external quantum efficiency (EQE) and luminous efficiency with current density resulting from enhancing the electron transporting properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5592–5603, 2008