Electrochemical tailoring of lamellar-structured ZnO films by interfacial surfactant templating

Zinc oxide films with ordered lamellar structures can be electrochemically produced by interfacial surfactant templating. This method utilizes amphiphile assemblies at the solid-liquid interface (i.e., the surface of a working electrode) as a template to electrodeposit inorganic nanostructures. To gain the ability to precisely tailor inorganic lamellar structures, the effect of various chemical and electrochemical parameters on the repeat distances, homogeneity, orientation, and quality of the interfacial amphiphilic bilayers were investigated. Surfactants with anionic headgroups (e.g., 1-hexadecanesulfonate sodium salt, dodecylbenzenesulfonate sodium salt, dioctyl sulfosuccinate sodium salt, mono-dodecyl phosphate, and sodium dodecyl sulfate) are critical because they incorporate Zn(2+) ions into their bilayer assemblies as counterions and guide the lamellar growth of ZnO films. Unlike surfactant structures in solution, the interfacial surfactant assemblies are insensitive to the surfactant concentration in solution. The use of organic cosolvents (e.g., ethylene glycol, dimethyl sulfoxide) can increase the homogeneity of bilayer assemblies when multiple repeat distances are possible in a pure aqueous medium. In addition, organic cosolvents can make the interfacial structure responsive to the change in bulk surfactant concentrations. The presence of quaternary alkylammonium salts (e.g., cetyltrimethylammonium bromide) as cationic cosurfactants improves the ordering of anionic bilayers significantly. Consequently, it also affects the orientation of lamellar structures relative to the substrate as well as the surface texture of the films. The quality of lamellar structures incorporated in ZnO films is also dependent on the deposition potentials that determine deposition rates. A higher degree of ordering is achieved when a slower deposition rate (I < 0.15 mA/cm(2)) is used. The results described here will provide a useful foundation to design and optimize synthetic conditions for the electrochemical construction of broader types of inorganic nanostructures.     

Micelle-assisted cerium(IV) oxidation of <Emphasis Type="SmallCaps">L</Emphasis>-sorbose in aqueous sulfuric acid

Spectrophotometric kinetic technique has been used to investigate the effect of cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) surfactants on the redox reaction of cerium(IV)+l-sorbose in aqueous sulfuric acid media. The anionic SDS has no effect, whereas the reaction rate increases in the presence of cationic CTAB, which is due to favorable conditions provide by the cationic micelles. The reaction rate decreases with [H₂SO₄], and no acid-dependent path has been observed. At constant [H₂SO₄], the rate of the reaction is dependent on the first powers of the l-sorbose and cerium(IV) concentrations. The CTAB-assisted reaction is retarded by addition of electrolytes (Na₂SO₄, NaNO₃, and NaCl), which is attributed to the competition between electrolyte anions and cerium(IV)-sulfato species. Bromide ion (of CTAB or externally added in the form of NaBr) is not oxidized by the cerium(IV) (as a main or side reaction).     

Spectroscopic investigations in molecularly organized solvent media. Part 3. Examination of the nitromethane selective quenching rule in aqueous anionic + cationic and anionic + nonionic mixed surfactant solutions

Applicability of the nitromethane selective quenching rule for discriminating between alternant versus nonalternant polycyclic aromatic hydrocarbons (PAHs) is examined for 20 representative PAH solutes dissolved in micellar sodium dodecylsulfate (SDS) + cetyltrimethylammonium bromide (CTAB), SDS + dodecyltrimethylammonium bromide (DTAB), SDS + Brij-35, and SDS + sodium octanoate (SO) mixed surfactant solvent media. Experimental results show that nitromethane quenched fluorescence of all 8 alternant PAHs studied in the four different solvent systems. Unexpected quenching behavior was observed, however, in the case of nonalternant PAHs. Nitromethane quenched fluorescence emission of nonalternant PAHs dissolved in the SDS + SO solvent media, which is contrary to the selective quenching rule. In the case of the mixed anionic + cationic surfactant solvent media, nitromethane quenching selectivity was restored at concentration ratios of approximately 4?:?1 (anionic:cationic) or less.     

Hydrotrope-induced inversion of salt effects on the cloud point of an extended surfactant

We report on the effects of electrolytes spanning a range of anions (NaOc, NaSCN, NaNO(3), NaBr, NaCl, NaBu, NaOAc, Na(2)SO(4), Na(2)HPO(4), and Na(2)CO(3)) and cations (LiCl, NaCl, KCl, CsCl, and choline chloride) on the aqueous solubility of an extended surfactant. The surfactant is anionic with a long hydrophobic tail as well as a significant fraction of propylene oxide groups and ethylene oxide groups (C(12-14)-PO(16)-EO(2)-SO(4)Na, X-AES). In the absence of electrolytes, X-AES exhibits a cloud-point temperature that decreases with increasing surfactant concentration. After the addition of salts to the surfactant solutions, various shifts in the solubility curves are observed. These shifts follow precisely the same Hofmeister series that is found for salting-in and salting-out effects in protein solutions. In the presence of different concentrations of sodium xylene sulfonate (SXS), the solubility of the surfactant increases. In this context, SXS can be considered to be a salting-in salt. However, when the electrolytes are added to an aqueous solution of X-AES and SXS the Hofmeister series reverses for divalent anions such as Na(2)SO(4), Na(2)HPO(4), and Na(2)CO(3). Studies on the phase behavior and micelle structures using polarization microscopy, freeze-etch TEM, and NMR measurements indicate a dramatic change in the coexisting phases on the addition of SXS.     

Controllable synthesis of conducting polypyrrole nanostructures

Wire-, ribbon-, and sphere-like nanostructures of polypyrrole have been synthesized by solution chemistry methods in the presence of various surfactants (anionic, cationic, or nonionic surfactant) with various oxidizing agents [ammonium persulfate (APS) or ferric chloride (FeCl3), respectively]. The surfactants and oxidizing agents used in this study have played a key role in tailoring the nanostructures of polypyrrole during the polymerization. It is inferred that the lamellar structures of a mesophase are formed by self-assembly between the cations of a long chain cationic surfactant [cetyltrimethylammonium bromide (CTAB) or dodeyltrimethylammonium bromide (DTAB)] and anions of oxidizing agent APS. These layered mesostructures are presumed to act as templates for the formation of wire- and ribbon-like polypyrrole nanostructures. In contrast, if a short chain cationic surfactant octyltrimethylammonium bromide (OTAB) or nonionic surfactant poly(ethylene glycol) mono-p-nonylphenyl ether (Opi-10) is used, sphere-like polypyrrole nanostructures are obtained, whichever of the oxidizing agents mentioned above is used. In this case, micelles resulting from self-assembly among surfactant molecules are envisaged to serve as the templates while the polymerization happens. It is also noted that, if anionic surfactant sodium dodeyl surfate (SDS) is used, no characteristic nanostructures of polypyrrole were observed. This may be attributed to the doping effect of anionic surfactants into the resulting polypyrrole chains, and as a result, micelles self-assembled among surfactant molecules are broken down during the polymerization. The effects of monomer concentration, surfactant concentration, and surfactant chain length on the morphologies of the resulting polypyrrole have been investigated in detail. The molecular structures, composition, and electrical properties of the nanostructured polypyrrole have also been investigated in this study.     

不同有机离子表面活性剂改性蒙脱土结构与性能比较

分别用阳离子表面活性剂十六烷基三甲基溴化铵（CTAB）、阴离子表面活性剂十二烷基磺酸钠(SDS)以及二者混合物(CTAB-SDS)的水溶液处理天然蒙脱土。 用红外光谱和X射线衍射比较了它们对蒙脱土结构的影响。 证明CTAB及CTAB-SDS处理蒙脱土的层间距分别由1.5420 nm增大至2.1946和1.8935 nm。 表明CTAB插入蒙脱土层间,且CTAB及CTAB-SDS处理蒙脱土在苯乙烯中分散性能明显提高,对有机物表现出良好的吸附性;而阴离子表面活性剂未进入蒙脱土层间,蒙脱土的结构和性能几乎未变。     

Spectroscopic investigations in molecularly organized solvent media. Part 3. Examination of the nitromethane selective quenching rule in aqueous anionic + cationic and anionic + nonionic mixed surfactant solutions

Applicability of the nitromethane selective quenching rule for discriminating between alternant versus nonalternant polycyclic aromatic hydrocarbons (PAHs) is examined for 20 representative PAH solutes dissolved in micellar sodium dodecylsulfate (SDS) + cetyltrimethylammonium bromide (CTAB), SDS + dodecyltrimethylammonium bromide (DTAB), SDS + Brij-35, and SDS + sodium octanoate (SO) mixed surfactant solvent media. Experimental results show that nitromethane quenched fluorescence of all 8 alternant PAHs studied in the four different solvent systems. Unexpected quenching behavior was observed, however, in the case of nonalternant PAHs. Nitromethane quenched fluorescence emission of nonalternant PAHs dissolved in the SDS + SO solvent media, which is contrary to the selective quenching rule. In the case of the mixed anionic + cationic surfactant solvent media, nitromethane quenching selectivity was restored at concentration ratios of approximately 4 : 1 (anionic:cationic) or less. Received: 22 May 1997 / Revised: 29 September 1997 / Accepted: 3 October 1997     

The significant effects of linear medium chain fatty alcohols on phase behavior of aqueous solution of mixed cationic–anionic surfactant

The effect of 1-hexanol on the phase behavior of aqueous solutions of sodium dodecyl sulfate (SDS) and cetyl trimethyl ammonium bromide (CTAB) has been systematically studied. The phase ranges of vesicle and liquid crystal (LC) can be greatly extended with the addition of 1-hexanol. These specific structures distributed symmetrically on the two sides of the SDS/CTAB equimolar line in the pseudo ternary phase diagram. The aqueous two phase system (ATPS) contained vesicles that would transform into lamellar LC with the change of ratio of SDS/CTAB. The phase behaviors of SDS/CTAB system with addition of different alcohols (C₅OH–C₈OH) showed similar trends in structural transition except for phase span, demonstrating that the obstruction of electrostatic interaction between surfactant polar heads was affected by the insertion depth of the added alcohols.     

Surfactant-assisted synthesis,characterizations, and room temperature ammonia sensing mechanism of nanocrystalline CuO

CuO nanocrystalline powder has been synthesized by a sol?gel auto combustion route with cetyltrimethylammonium bromide (CTAB) as cationic surfactant, and sodium dodecyl sulphate (SDS) as anionic surfactant. The powder samples are characterized by TGA/DTA, XRD, FESEM, and TEM techniques. Thermal analysis of the dried gel samples shows that addition of surfactant in the precursor increases the heat of reaction, which is evolved in the decomposition of metal citrate complex. The CTAB and SDS addition in the reaction mixture lowers the average crystallite size to few tens of nanometer. Surfactant doping in precursor causes a variation in lattice strain and changes to its type to compressive. CuO nanoparticles are bound together into facets–like weakly aggregated clusters, as indicated by FESEM images. TEM micrographs indicate the porous, nearly spherical particles having crystallite size around 7 and 18 nm for CTAB and SDS surfactant assisted CuO samples respectively. CuO nanoparticles assembled as thick film have been tested for their response to 100 ppm ammonia gas at room temperature. Cationic surfactant assisted sample shows maximum response to ammonia as compared to anionic surfactant. The CTAB assisted sensor shows almost completes recovery in 500 s whereas SDS assisted sample shows 75% recovery in the same time. The ammonia response of the films obeys the Elovich equation. The response rate of sensor is found to be maximum for CTAB assisted CuO films as compared to other samples. The kinetics of the response reaction shows that the ionic surfactants assisted CuO follows second order reaction kinetics.     

The Viscous Properties of Anionic/Cationic and Cationic/Nonionic Mixed Surfactant Systems

The behavior of mixed cationic/anionic and cationic/nonionic surfactants solutions have been studied by viscosimetry. The systems studied were sodium dodecyl sulfate (SDS)/cetyltrimethylammonium bromide (CTAB) and CTAB/Brij (polyoxyethylene lauryl ether, n = 10 and 23) in aqueous and sodium chloride solutions. The relative viscosity of single nonionic surfactant solutions is larger than that of SDS or CTAB solutions. It increases with the number of ethylene oxide groups. In the mixed systems, viscosity deviates from ideal behavior. The deviation results from electrostatic interactions. The surfactant mixture composition affects the self-assembled microstructure and rheology. A new mixed system that forms clear micellar solution above CMC was detected. In CTAB/Brij systems, the experimental data also deviate from ideal behavior due to mixed micelle formation and electroviscous effect. This effect is less pronounced than that of SDS/CTAB system and could be suppressed by adding an electrolyte (NaCl).     

Reinforcement of hydroxypropylcellulose films by cellulose nanocrystals in the presence of surfactants

Hydroxypropylcellulose (HPC) films were prepared by casting with cellulose nanocrystals in the presence of anionic surfactant sodium dodecylsulphate (SDS) and cationic surfactant hexadecyltrimethyl ammonium bromide (CTAB). The cellulose nanocrystals were isolated from maize straw, a biomass source produced in huge quantities as an agrowaste in Brazil. These bionanocomposite films had good transparency and their surface hydrophilic character was evidenced by static contact angle measurements. Thermogravimetry (TGA) measurement revealed that nanocrystals and surfactants changed the thermal stability of the HPC films. Dynamic mechanical analysis (DMA) showed that the tensile storage and loss moduli of the HPC films increased by increasing the contents of cellulose nanocrystals and surfactants, especially in the case of CTAB. This good reinforcing effect of HPC matrix can be explained as due to electrostatic attractive interactions brought about by the presence of CTAB and the nanocrystals.     

Determination of atmospheric concentrations of inorganic anions by ion chromatography following ultrasonic extraction

The capability of the suppressed conductometric detection ion chromatography (IC) was investigated for the separation and determination of inorganic anions (F-, Cl-, NO3- and SO4(2-)) in standard reference materials SRM-1648 urban particulate matter following ultrasonic extraction. The effects of the cationic surfactant (SDS) and the anionic surfactant (CTAB) on ultrasonic extraction efficiency of inorganic anions from complex matrix of airborne particulate matter were investigated. The results showed that surfactant can enhance the extraction efficiency. Finally, the concentrations of inorganic anions in the atmosphere of the city of Isfahan were determined. The results showed a trend of SO4(2-) > NO3- > Cl- > F-.     

电解质和阳离子表面活性剂对MMH/粘土体系胶体性能的影响

通过流变参数、电泳淌度和pH值的测定,研究了NaCl、MgCl₂、Na₂SO₄等电解质和阳离子表面活性剂(十六烷基三甲基溴化铵)对铝镁混合金属氢氧化物(MMH)/钠土(Mt)悬浮体胶体性能的影响.发现所研究的电解质和表面活性剂都能使MMH/Mt悬浮体的Bingham屈服值降低,但不同处理剂影响pH值和滤失量的变化趋势却不同.认为电解质中的阳离子以影响粘土颗粒间的缔合为主,而阴离子以影响MMH的荷电性能为主,前者使滤失量上升,pH值下降;后者使滤失量下降,pH值上升.电解质对MMH/Mt悬浮体滤失量和pH值的影响取决于二者相对能力的大小.阳离子表面活性剂由于在粘土上吸附后不仅影响颗粒之问的缔合,也能使其润湿性反转,导致MMH/Mt悬浮体的滤失量和Bingham屈服值的变化幅度明显高于无机电解质.     

Water-dissolvable sodium sulfate nanowires as a versatile template for the fabrication of polyelectrolyte- and metal-based nanotubes

This study presents the synthesis of water-dissolvable sodium sulfate nanowires, where Na(2)SO(4) nanowires were produced by an easy reflux process in an organic solvent, N,N-dimethylformamide (DMF) and formed from the coexistence of AgNO(3), SnCl(2), dodecylsodium sulfate (SDS), and cetyltrimethylammonium bromide (CTAB). Na(2)SO(4) nanowires were derived from SDS, and the morphology control of the Na(2)SO(4) nanowires was established by the cooperative effects of Sn and NO(3)(-), while CTAB served as the template and led to homogeneous nanowires with a smooth surface. Since the as-synthesized sodium sulfate nanowires are readily dissolved in water, these nanowires can be treated as soft templates for the fabrication of nanotubes by removing the Na(2)SO(4) core. This process is therefore significantly better than other reported methodologies to remove the templates under harsh condition. We have demonstrated the preparation of biocompatible polyelectrolyte (PE) nanotubes using a layer-by-layer (LbL) method on the Na(2)SO(4) nanowires and the formation of Au nanotubes by the self-assembly of Au nanoparticles. In both nanotube synthesis processes, PEI (polyethylenimine), PAA (poly(acrylic acid)), and Au nanoparticles served as the building blocks on the Na(2)SO(4) templates, which were then rinsed with water to remove the core templates. This unique water-dissolvable template is anticipated to bring about versatile and flexible downstream applications.     

Crystal modification of calcium sulfate dihydrate in the presence of some surface-active agents

The effect of surface-active agents (surfactants), as additives, on the crystallization of gypsum was studied under conditions of the simulated dihydrate process of phosphoric acid production. Calcium hydrogen phosphate and sulfuric acid were mixed with dilute phosphoric acid at 80 degrees C, and the turbidity of the reaction mixture was measured at different time periods to determine the induction time of gypsum crystal formation. Two types of surfactants, namely, cetyltrimethylammonium bromide (CTAB) as a cationic surfactant and sodium dodecyl sulfate (SDS) as an anionic surfactant were added to investigate their effects on the crystallization of gypsum. Addition of CTAB decreased the induction time and increased the growth efficiency, while addition of SDS increased the induction time and decreased the growth efficiency compared with the baseline (without additives). The surface energy increased with CTAB and decreased with SDS compared with the baseline. The percentage of fine crystals decreased in the presence of CTAB and increased in the presence of SDS compared with the baseline. Gypsum morphology changed from needle-like in the absence of additives to tabular in the presence of CTAB.     

卵清蛋白与离子型表面活性剂的相互作用

本文通过荧光光谱法、紫外-可见吸收光谱法和透射电镜并结合电导率测定分别研究了水中卵清蛋白与阴离子表面活性剂十二烷基硫酸钠（SDS）和阳离子表面活性剂十二烷基三甲基溴化铵（DTAB）和十六烷基三甲基溴化铵（CTAB）之间的相互作用。研究结果表明卵清蛋白可以增加SDS和CTAB的临界胶束浓度,但对DTAB的临界胶束浓度没有影响。阴离子表面活性剂可以使卵清蛋白构象完全伸展,而阳离子表面活性剂却不具备此种作用。表面活性剂单体与卵清蛋白的相互作用强于表面活性剂胶束与卵清蛋白的相互作用。     

Regulatory role of surfactants in the kinetics of glucose oxidase-catalyzed oxidation ofd-glucose by ferrocenium andn-butylferrocenium ions

The effect of micelles of different surfactants (cationic, anionic, and neutral) on the kinetics of the glucose oxidase-catalyzed reduction of ferrocenium cations RFc⁺ (R=H, Buⁿ) byd-glucose was studied by spectrophotometry. In micellar media of Triton X-100 and sodium dodecyl sulfate (SDS), the Michaelis dependence of the reaction rate on the HFc⁺ concentration is observed, while this dependence has an extreme character in cationic micelles of cetyltrimethylammonium bromide (CTAB). The nature and concentration of surfactants of all types have a slight effect on the rate of reduction of HFc⁺. The level of enzymatic activity is approximately equal in the case of Triton X-100 and CTAB and is considerably lower in the SDS micelles. On going from HFc⁺ to BuⁿFc⁺, the reaction rate is maximum in the cationic CTAB micelles, the anionic SDS micelles exhibit almost no activity, and the activity has an intermediate value in neutral micelles of Triton X-100. The conditions are presented under which the micellar medium controls the catalytic activity of glucose oxidase with respect to ferrocenium cations. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1795–1801, October, 1997.     

Rheological Study of Interactions between Anionic Guar and Oppositely Charged Surfactant

We have studied the interactions between anionic carboxymethyl guar (CMG) and oppositely charged surfactant: dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB), cetyltrimethylammonium bromide (CTAB), and gemini surfactants (16-4-16), using rheological measurements. In the present study, two competing forces, electrostatic interaction and hydrophobic interaction, have been identified as important factors. Various types of structure formed on the anionic CMG chains are qualitatively discussed in comparison. For example, C₁₂TAB and gemini surfactant tend to form polymer-bound aggregates, whereas the C₁₆TAB tend to form the polymer-associated architecture. Furthermore, possible mechanisms based on the experimental results to elucidate these interesting phenomena have been proposed and discussed.     

Synergistic effect of mixed anionic and cationic surfactant systems on the interfacial tension of crude oil-water and enhanced oil recovery

Surfactant based enhanced oil recovery (EOR) is an interesting area of research for several petroleum researchers. In the present work, individual and mixed systems of anionic and cationic surfactants consisting of sodium dodecyl sulphate (SDS) and cetyltrimethylammonium bromide (CTAB) in different molar ratios were tested for their synergistic effect on the crude oil-water interfacial tension (IFT) and enhanced oil recovery performance. The combination of these two surfactant systems showed a higher surface activity as compared to individual surfactants. The effect of mixed surfactant systems on the IFT and critical micellar concentration (CMC) is strongly depends on molar ratios of the two surfactant. Much lower CMC values were observed in case of mixed surfactant systems prepared at different molar ratios as compared to individual surfactant systems. The lowest CMC value was found when the molar concentration of SDS was higher than the CTAB. When the individual and mixed surfacant systems were tested for EOR performance through flooding experiments, higher ultimate oil recovery was obtained from mixed surfactant flooding compared to individual surfactants. Combination of SDS and CTAB or probably other anionic-cationic surfactants show synergism with substantial ability to reduce crude oil water IFT and can be a promising EOR method.     

The Influence on Interfacial Tension of the Combination of Anionic and Cationic Surfactants: Alkyl Sulfonate/Alkyltrimethylammonium Bromide

Mioellization of aqueous mixture of sodium octyl sulfonate ( C₈As )/ cetyltrimethylammonium bromide (CTAB) and sodium dodecyl sulfonate (C₁₂As)( CTAB in the presence of sodium bromide has been studied by surface tension measurement. Nonideal solution theory has been used to calculate the molecular interaction parameters (β^M and β^s). The oil-aqueous interfacial tensions of C₁₂As/ CTAB, C₈As/CTAB, C₁₂As/dodecyl trimethylammonium bromide (DTAB) systems were also measured. We studied the influence of the surfactant concentration, surfactant molar fraction ratio, hydrocarbon chain length, added NaCl and alcohol concentration on the interfacial tension.