Linear Elastic Solutions for Slotted Plates

Two-dimensional problems of finite-length blunted cracks cut into infinite plates subject to remote tractions are solved using complex variable theory. The slot geometry is composed of two flat surfaces connected by rounded ends. This special geometrical shape was derived by Riabouchinsky in the study of two-dimensional ideal fluid flow around parallel plates. The simpler antiplane slotted plate problem is addressed initially for this geometry. From this exact solution, the equivalent of a Westergaard stress potential is found and applied to the two other principal modes of fracture, which are plane elasticity problems. For a plate subject to uniform radial tension at infinity, an analytical solution is obtained that will reduce to the familiar mode I singular crack solution as the separation between the parallel faces of the slot becomes zero. For finite-width mode I slots, the rounded ends have tensile tractions which terminate at the adjoining flat surfaces of the slot, which remain traction-free. In this respect, the finite-width mode I slot problem resembles a Barenblatt cohesive zone model of a plane crack or a Dugdale plastic strip model of a plane crack, although the tractions will vary in magnitude along the slot ends rather than remaining uniform as in the former type of crack problems. Similarly, in the case of the finite-width mode II slot problem, the rounded ends of the slot have shear tractions, while the flat surfaces remain load-free. A distinguishing feature of the mode II slot solution over the mode I slot problem is that the maximum in-plane shear stress is constant along the rounded ends of the slot. Because of this, those particular regions of the boundary can represent incipient plastic yield based on either the Mises or Tresca yield condition under plane strain loading conditions. In this way, the problem resembles the plastic strip models of Dugdale, Cherepanov, Bilby-Cottrell-Swinden, and others. Notably, the mode III slot problem also has a constant maximum shear stress along the curved portions of the slot, while the entire slot boundary remains traction-free, unlike the mode II slot problem. Consequently, the mode III slot problem represents both a generalization of the standard mode III crack problem geometry, while simultaneously satisfying the boundary conditions of a plastic strip model.     

Thermal Stresses in Elastic: Plates*

A method is proposed for the solution of elastic quadrilateral plates under thermal loads. The procedure employs eigenfunctions for angular regions, together with a least squares technique. An electronic computer is a necessary adjunct to the proposed method of solution. Numerical results are given     

An Experimental-Numerical Hybrid Method for Elastic Contact Problems*

ABSTRACT

An experimental-numerical hybrid technique for determining the contact stress distribution between two elastic bodies having both frictionless as well as bonded contact is discussed in this paper. The hybrid method makes use of experimental data collected at a section far from the contact surface and the numerically generated influence coefficients, in terms of the applied unit normal and shear stresses. The experimental data, i.e., the differences in normal stresses and the shear stress, are obtained using photoelastic analysis for the examples illustrated in this paper. When substituted into equations corresponding to the unit normal and shear stress applied in the contact region, this results in a set of algebraic equations which, when solved, allow the contact stress distribution to be obtained. This method is illustrated with examples involving simple and complex geometries of the contacting bodies.     

拉压不同弹性模量结构的动力特性分析

研究了拉压不同弹性模量结构动力问题的计算方法,建立了不同模量板壳结构动力特性的有限元算法,编制了相应的计算程序,并通过例题计算及分析得出了有价值的结论。     

Thermomechanical Postbuckling of Imperfect Moderately Thick Plates on Nonlinear Elastic Foundations*

ABSTRACT

A postbuckling analysis is presented for a moderately thick rectangular plate subjected to combined axial compression and uniform temperature loading, and resting on a softening nonlinear elastic foundation. The cases of (1) thermal postbuckling of initially compressed plates and (2) compressive post-buckling of initially heated plates are considered. The initial geometrical imperfections of the plates are taken into account. Formulations are based on Reissner-Mindlin plate theory, considering first-order shear deformation effects, and including plate-foundation interaction and thermal effects. The analysis uses a deflection-type perturbation technique to determine buckling loads and postbuckling equilibrium paths. Numerical examples include the performance of perfect and imperfect, moderately thick plates resting on softening nonlinear elastic foundations. Typical results are presented in dimensionless graphical form.     

弹性杆与结构接触冲击的冲击力计算研究

本文提出了一种将杆与结构的接触冲击问题简化为集中力与集中阻尼的常规结构动力学问题的计算模型。对于大型结构，可采用一种特殊的人工边界，只需对人工边界域内的结构用有限元法进行计算。这种人工边界是齐次的，可根据冲击影响区的大小人为地确定     

Elastoplastic Bending of Plates Resting on Elastic Subgrade under Rotational Symmetry Conditions*

An analysis of rotationally symmetric plates resting on an elastic subgrade is presented. The plates are made of an elastic, perfectly plastic material that obeys Johansen's yield condition and associated flow rule. The analysis is simplified by assuming that any plate element is either entirely elastic or entirely plastic. This assumption is practically fulfilled for a sandwich plate. Differential equations that describe the behavior of plastic zones during the deformation process are derived and solved in closed form. Examples of solutions for uniformly loaded circular plates are given.     

Adhesive Frictionless Contact Between an Elastic Isotropic Half-Space and a Rigid Axi-Symmetric Punch

In this paper we consider the problem of adhesive frictionless contact of an elastic half-space by an axi-symmetric punch. We obtain integral equations that define the tractions and displacements normal to the surface of the half-space, as well as the size of the contact regions, for the cases of circular and annular contact regions. The novelty of our approach resides in the use of Betti’s reciprocity theorem to impose equilibrium, and of Abel transforms to either solve or substantially simplify the resulting integral equations. Additionally, the radii that define the annular or circular contact region are defined as local minimizers of the function obtained by evaluating the potential energy at the equilibrium solutions for each pair of radii. With this approach, we rather easily recover Sneddon’s formulas (Sneddon, Int. J. Eng. Sci., 3(1):47–57, 1965) for circular contact regions. For the annular contact region, we obtain a new integral equation that defines the inverse Abel transform of the surface normal displacement. We solve this equation numerically for two particular punches: a flat annular punch, and a concave punch.     

各向异性弹性体光滑接触界面上的滑移脉冲波

利用Stroh公式,Fourier分析和奇异积分方程技术研究了两各向异性弹性半空间光滑接触可分离界面上滑移脉冲波的存在及其传播特性。结果表明,如果至少能在一种介质中存在Rayleigh波,且其波速小于两种介质中的最小极限速度,则滑移脉冲波就可以存在。这种脉冲波传播速度不确定,可在最小极限波速与较低的Rayleigh波速之间取值,而该取值范围又取决于无界面分离情况下的第一、第二滑移波的解。分离区大小取决于扰动的强度,界面法向力和质点速度在分离区两端有 1 /2奇异性。     

Contact Interaction Between a Laminated Shell of Revolution and a Rigid or Elastic Foundation

A method is proposed to solve the contact problem for laminated anisotropic shells of revolution. The method is based on a two-dimensional model that accounts for transverse shears and reduction. Also the method is based on the method of successive approximations, the generalized pseudo-force method, and a numerical-analytical method of solving boundary-value problems. The results obtained for a cylindrical shell of complex thickness structure are compared with those obtained in three-dimensional formulation__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 5, pp. 68–75, May 2005.     

弹性薄板的后屈曲特性

文章用三维弹性理论的非线性应变公式研究了弹性薄板的后屈曲特性，旨在探讨冯·卡门平板大挠度方程的可靠性范围。计算结果表明，当板中薄膜力较大时，用冯·卡门方程描述后屈曲问题会产生较大的误差。     

Contact Problems for Prestressed Elastic Bodies and Rigid and Elastic Punches

Contact problems for prestressed bodies and rigid and elastic punches are discussed. The influence of the prestresses on the contact characteristics is analyzed numerically     

Bending Solutions for Inhomogeneous and Laminated Elastic Plates

A procedure has been developed in previous papers for constructing exact solutions of the equations of linear elasticity in a thick plate of inhomogeneous isotropic linearly elastic material in which the elastic moduli depend in any specified manner on a coordinate normal to the plane of the plate. The essential idea is that any solution of the classical thin plate or classical laminate theory equations (which are two-dimensional theories) generates, by straightforward substitutions, a solution of the three-dimensional elasticity equations for the homogeneous material. Recently this theory has been formulated in terms of functions of a complex variable. It was shown that the displacement and stress fields in the inhomogeneous material could be expressed in terms of four complex potentials that are analytic functions of the complex variable ζ = x + iy in the mid-plane of the plate. However, the analysis performed so far applies only to the case of a plate with traction-free upper and lower faces. The present paper extends these solutions to the case where the plate is bent by a pressure distribution applied to a face.     

弹性支承条件下车-桥体系的振动分析

本文研究弹性支承条件下车-桥体系的动力分析方法。给出了弹性支承桥梁和车体的振动方程并通过对具有弹性支座简支梁主振动的分析，得出了梁主振型的解析公式。分析计算了上海高架轨道交通典型区段具有弹性支座高架梁的主振型，并利用龙格-库塔法分析计算了车-桥体系在列车通过时的桥梁和车体的振动。计算结果表明，在上海高架轨道交通实际计算参数条件下，考虑支座弹性后桥梁和车体的振动与刚性支承梁的情况相比变化不明显。本文还计算分析了不同橡胶减震支座的刚度及考虑减震支座后系统阻尼比增大等因素对高架梁振动反应的影响，得出一些有益的结论。     

弹性半空间地基上的矩形板

分析和计算了性半空间地基上四边自由矩形板的动力和静力问题，把地基看作三维性半空间体，考虑地基的衰减变形，假定地基与板之间完全粘着摩擦接解，用能量变分析理导出了一般方程，并作了数值算例，还分析了相刚度对动力和静力性能的影响。     

A Theory of Chiral Cosserat Elastic Plates

The mechanical behaviour of chiral materials is of interest for the investigation of carbon nanotubes, honeycomb structures, auxetic materials and bones. This paper is concerned with a theory of chiral Cosserat elastic plates. In this theory, in contrast with the case of achiral plates, the stretching and flexure cannot be treated independently of each other. First, we derive the basic equations which characterize the deformation of chiral plates. Then we establish a uniqueness result in the dynamical theory. In the equilibrium theory we establish conditions under which the Neumann problem admits solutions. Finally, the deformation of an infinite plate with a circular hole is studied. It is shown that, in contrast with the theory of Cosserat achiral plates a uniform pressure acting on the boundary of the hole produces a microrotation of the material particles.     

弹性薄圆板的后屈曲分析

本文对薄圆板的后屈曲进行了研究。采用Galerkin法,试函数选为Legendre多项式,控制方程是Von-karman大挠度方程。考虑了简支,夹支两种边界条件。计算结果与有关文献[1]进行了比较,表明以Legendre多项式为试函数收敛快,精度高,且计算工作量较文献[1]为小。     

Buckling of Elastic Beam Under Unilateral Constraint

ABSTRACT

A criterion is proposed to calculate the critical load of a continuous beam under unilateral constraint. The beam is assumed to be built in at the ends and to rest on equally spaced elastic supports, that have equal stiffness. The problem is solved by determining the length of the half-wave of the buckled shape, the number of supports involved, and their position with respect to the end of the half-wave. The analysis model thus defined is determined in relation to the geometry of the beam and to the ratio between the stiffness of the supports and the shearing stiffness of the generic span. It is shown that there exists a limiting value of this ratio, below which the critical load is unaffected by the presence of unilateral constraints. The results obtained are shown in a nondi-mensional diagram that is of practical value. Two examples are presented to illustrate applicability of the procedure proposed.     

损伤弹性薄板的弯曲

通过损伤弹性薄板的变分方法,推导了损伤弹性薄板弯曲的运动控制方程．选取满足边界条件的挠度函数,采用Ritz法和 Galerkin法,将原问题转化为线性方程组的求解．通过算例分析,得到y=b/2处挠度和损伤随x的变化曲线,结果表明损伤薄板中任一点的位移总是大于无损薄板中的位移．