Compton散射下强激光等离子体空气冲击波波前的传输特性

 根据球对称激光等离子体空气冲击波在自由空间中传输的约束条件,对多光子非线性Compton散射的强激光等离子体空气冲击波波前的传输特性进行了研究,给出了散射下空气冲击波波前的运动方程,并进行了数值模拟。结果表明：该冲击波的衰减过程不仅与爆炸源和爆炸过程的特性、释放总能量、空气的弹性有关,而且还与散射有关,散射效应使冲击波的初始半径增大,衰减过程加快,能量转移率提高;数值模拟与实验结果符合得很好。     

隔板深度对激波聚焦起爆影响的数值模拟研究

考虑几何结构参数对激波聚焦触发爆轰波的复杂影响,对H2/Air预混气的环形射流激波聚焦起爆现象开展了数值模拟研究,详细分析了不同隔板深度条件下的激波聚焦过程、流场演化特征以及爆轰波参数变化规律。研究结果表明,凹腔内激波聚焦诱导的局部爆炸以及隔板前缘处射流形成"卷吸涡"是引起爆轰波触发的两个重要机制,而隔板深度是影响环形射流激波聚焦起爆性能的关键因素。随着隔板深度的增加,凹腔内激波聚焦的强度逐步增强,回传的能量损失有所减小,进而导致爆燃转爆轰的距离与时间显著缩短。此外,当隔板深度由1 mm逐渐增加至3 mm时,爆轰波自持传播稳定性呈现出先降低后升高的变化趋势,产生这一现象的主要原因是爆轰波强度与三波点运动的相互作用。     

脉冲辐照热激波与压缩应力波

 扼要地阐述了X射线、电子束辐照材料时所产生的热激波与高速碰撞、炸药爆炸所产生的压缩波之间一些不同的现象特征，可为热激波的分析、研究以及模拟提供参考。     

柱状装药预制破片缩比战斗部爆炸冲击波和破片的作用时序

针对柱状装药的周向预制破片战斗部,结合无量纲分析方法和爆炸驱动理论,确定了影响破片和冲击波相遇位置的关键参数,给出了由缩比战斗部推广预测原型战斗部爆炸产生的破片冲击波作用时序的方法。采用ANSYS/LS-DYNA有限元软件进行数值模拟,对比验证了理论分析和数值试验结果,分析了战斗部缩比比例对冲击波和破片作用时序的影响。结果表明:缩比模型与原型战斗部爆炸产生的破片和冲击波的相遇位置之比和相遇时间之比主要取决于两模型的质量比,在不考虑破片速度衰减时,两模型中载荷相遇位置之比和相遇时间之比等于其质量比的0.33次方。受破片速度衰减影响,该方法仅适用于质量缩比不小于0.2的模型。     

Cavitation induced by explosion in an ideal fluid model

We discuss the problem of an explosion in the cubic-quintic superfluid model, in relation to some experimental observations. We show numerically that an explosion in such a model might induce a cavitation bubble for large enough energy. This gives a consistent view for rebound bubbles in superfluid and we identify the loss of energy between the successive rebounds as radiated waves. We compute self-similar solution of the explosion for the early stage, when no bubbles have been nucleated. The solution also gives the wave number of the excitations emitted through the shock wave.     

不同起爆方式对含铝炸药水中爆炸近场冲击波压力的影响

 采用SJZ-30和GSJ-15型高速扫描相机,对端面点起爆、侧边点起爆和中心点起爆方式下,HLZY-1含铝炸药水中爆炸近场冲击波传播过程进行了实验观测,通过数字化方法得到了炸药近场冲击波沿狭缝方向的扫描曲线和冲击波压力变化曲线。研究表明,起爆方式对炸药水中爆炸初始冲击波峰值压力以及近场冲击波峰值压力的衰减有重要的影响。研究结果可以为水中兵器战斗部的设计以及毁伤效能评估提供参考。     

一种水中爆炸气泡脉动实验研究方法

 在2 m×2 m×2 m的实验水箱中开展小当量PETN炸药水中爆炸气泡脉动实验时,利用弹性波从声阻抗高的物质传入声阻抗低的物质时的“减震缓冲”原理,采用在水箱壁贴低声阻抗材料的方法,有效降低了水箱壁反射冲击波对气泡脉动过程的影响,获得了清晰的气泡脉动过程图像、气泡水射流形成过程图像和气泡脉动压力曲线。将水箱实验结果与8 kg TNT当量爆炸水池实验结果对比,得到的最大相对误差仅为5.1%,验证了水箱实验方法的准确性,为炸药水中爆炸气泡脉动现象研究提供了一种简便有效的实验方法。     

Optical study of parameters of the passage of a shock wave from air to water

A study is made of the penetration of shock waves from air into water. The shock wave in air is generated as a result of dielectric breakdown induced by pulsed CO₂-laser radiation. A combination of the double-exposure shadow method and holographic interferometry is used to measure the shock-wave parameters. Density and pressure profiles behind the wave front are obtained at different times after onset of breakdown. It is shown experimentally that as the wave passes through the interface from the air to the water, there is a fourfold amplification of the pressure in the shock wave front. Estimates of the width of the shock wave front formed in the water are given in the context of studies of large-scale explosion processes. It is shown that simple empirical dependences, established in the course of studies of large-scale explosions, are also valid with certain corrections for microscopic laboratory experiments. Zh. Tekh. Fiz. 68, 39–43 (August 1998)     

Impact of an extended source in laser ablation using pulsed digital holographic interferometry and modelling

Pulsed digital holographic interferometry has been used to study the effect of the laser spot diameter on the shock wave generated in the ablation process of an Nd:YAG laser pulse on a Zn target under atmospheric pressure. For different laser spot diameters and time delays, the propagation of the expanding vapour and of the shock wave were recorded by intensity maps calculated using the recorded digital holograms. From the latter, the phase maps, the refractive index and the density field can be derived. A model was developed that approaches the density distribution, in particular the ellipsoidal expansion characteristics. The induced shock wave has an ellipsoid shape that approaches a sphere for decreasing spot diameter. The ellipsoidal shock waves have almost the same centre offset towards the laser beam and the same aspect ratio for different time steps. The model facilitates the derivation of the particle velocity field. The method provides valuable quantitative results that are discussed, in particular in comparison with the simpler point source explosion theory.     

Effect of debris fragments on direct initiation of spherical detonation waves in stoichiometric oxygen/hydrogen mixtures

Paper reports a result of experiments of spherical shock waves generated by explosions of micro-explosives weighing from 1 to 10 mg ignited by the irradiation of Q-switched laser beam and direct initiation to a spherical detonation wave in stoichiometric oxygen/hydrogen mixtures at 10–200 kPa. We visualized the interaction of debris particles ejected micro-explosives’ surface with shock waves by using double exposure holographic interferometry and high-speed video recording. Upon explosion, minute inert debris launched supersonically from micro-charge surface precursory to shock waves initiated spherical detonation waves. To examine this effect we attached 0.5–2.0 μm diameter SiO₂ particles densely on micro-explosive surfaces and observed that the supersonic particles, significantly promoted the direct initiation of spherical detonation waves. The domain and boundary of detonation wave initiations were experimentally obtained at various initial pressures and the amount of micro-charges.     

Interaction of Shock Waves in Cement Mortar Plate Investigated by the Digital Speckle Correlation Method

Interaction of shock waves in cement mortar plate is studied by digital speckle correlation method and digital high-speed photography technique. When the plates were destroyed by two detonators exploding at the same time, variation of shock wave field is obtained. Experimental results show that the interaction of shock waves will result in a nonlinear huge increase of local normal strain, leading to large deformation and serious destruction. However, the occurrence of this strongly nonlinear phenomenon sensitively depends on the interval between detonators, and it will only appear when the interval is smaller than the diameter of the region where shock waves exist.     

炸药混凝土中爆炸能量释放规律的研究

 通过对炸药在混凝土中爆炸的并行计算,分析其数值计算结果,并对爆炸力学基础理论进行研究后认为：炸药在土岩介质中爆炸,炸药能量将通过爆炸空腔中爆炸产物内冲击波的多次往复反射的方式进行释放,同时破坏并推动土岩介质移动,土岩介质与爆炸气体的界面在爆腔内稀疏波的作用下进行持续减速扩张运动。     

强激光驱动爆炸与冲击效应

随着高功率密度激光技术的快速发展,强激光驱动的爆炸与冲击效应逐渐引起国内外学者的广泛关注。对强激光诱导爆炸与冲击效应研究进展进行了综述,包括强激光诱导爆炸载荷特征与相似律,强激光对材料表面冲击强化处理,强激光冲击诱导材料相变动力学行为,以及利用强激光驱动微弹道冲击等方面的研究进展,并指出了强激光诱导爆炸与冲击效应研究的发展趋势和未来需要解决的关键科学问题。     

核爆氘能发电爆室设计中的物理问题

对10 kt TNT级核爆氘能发电爆室设计中的物理问题作初步分析.估算热载体钠的最低用量,分析影响钠汽化的物理因素及对阻尼核爆击波的作用.对爆室中核爆非静态过程——冲击波对爆室外壳的作用强度及爆室外壳对核爆击波耐受能力作定性的评估.     

多物质流体动力学方法与结构动力学方法结合的流固耦合计算技术

建立一种基于重叠网格空间覆盖判断的流固耦合计算技术,把流场计算的Euler多物质流体动力学计算过程和Lagrange结构动力学计算过程相结合以描述流固间的相互作用.介绍该计算技术的具体实现过程,讨论提高几何判断效率、避免耦合遗漏、流固计算时间步协调等处理技术.应用建立的流固耦合计算程序模拟爆炸容器中爆炸流场对容器内部结构、容器壳体的作用过程.计算结果表明其可以反映流场发展过程、流场结构相互作用和结构的运动变形和破坏过程.     

地下强爆炸辐射流体动力学过程的二维数值模拟

为评估强爆炸的毁伤效应,利用流固耦合界面处理方法,考虑辐射输运引起的能量沉积过程,建立同时求解辐射流体力学方程和流体弹塑性方程的二维耦合计算方法,给出地下强爆炸时,爆室内辐射波传播、辐射能量沉积到岩土表层、岩土表层膨胀、冲击波在岩土介质中传播、爆室内高压压缩爆室壁、爆室壁振荡增大的完整物理过程.     

Phase change and stress wave in picosecond laser–material interaction with shock wave formation

When background gas is present in pulsed laser–material interaction, a shock wave down to the nanoscale will emerge. The background gas will affect the phase change and explosion in the target. This study is focused on the void dynamics and stress wave in a model material (argon crystal) under picosecond pulsed laser irradiation. Our results show that existence of ambient gas and the shock wave significantly suppresses the void formation and their lifetime. Void dynamics, including their growing rate, lifetime, and size under the influence of ambient gas are studied in detail. All the voids undergo an accelerating and decelerating process in the growth. The collapsing process is almost symmetrical to the growing process. Higher laser fluence is found to induce an obvious foamy structure. Stress wave formation and propagation, temperature contour, and target and gas atom number densities are studied to reveal the underlying physical processes. Although the interaction of the plume with ambient gas significantly suppresses the void formation and phase explosion, no obvious effect is found on the stress wave within the target. Very interestingly, secondary stress waves resulting from re-deposition of ablated atoms and void collapse are observed, although their magnitude is much smaller than the directly laser-induced stress wave.     

激波聚焦反射的实验和数值研究

 采用高速摄影技术和数值模拟方法,对入射激波在两种不同形状的抛物形反射器表面聚焦和反射的过程进行了研究,得到了激波聚焦反射过程的波系结构的实验阴影照片和数值计算结果,两者符合得很好。对激波聚焦形成的气体动力学焦点的特性进行了分析,结果表明,入射激波在两种反射器反射后聚焦所形成的气体动力学焦点均是由三波点在轴心处的会聚所导致的,气体动力学焦点位于相应的反射器壁面的几何焦点附近。不同的反射器中,激波聚焦前后的波系结构也不同,对较浅的反射器,入射激波反射前在反射器壁面形成了弓形激波,反射之后需要相对较长的时间完成聚焦,形成聚焦反射激波之后弓形激波仍未相交;对较深的反射器,入射激波反射后在更短的时间内聚焦,聚焦时弓形激波已经相交,聚焦反射激波之后的流场波系结构更加复杂。     

基于速度干涉仪的冲击波精密调速实验技术研究

冲击波精密调速技术是惯性约束聚变研究的关键技术之一. 针对冲击波精密调速诊断技术的要求, 以神光III原型上脉宽为3 ns的两台阶整形激光脉冲为源, 用石英晶体做窗口材料, 模拟了双冲击在石英晶体中传输和追赶的过程. 利用两发典型双冲击波调速的实验数据, 验证了神光III原型具有的精密调速能力. 实验结果表明, 在驱动源、 靶和诊断系统参数一致的条件下, 两发实验获得的实验结果中两次冲击出现的时刻, 冲击波速度都很一致. 通过精细分析, 发现在两次冲击交会的时刻, 干涉条纹清晰度和完整性变化最大, 最终数据处理获得的冲击波速度偏差也最大. 同时, 在二次冲击的冲击波速度有较大增加的条件下, 并没有观察到冲击波阵面的反射率的明显增加. 本文的实验结果作为一个数据依据, 为全面开展冲击波调速实验提供了有效的方法.     

激光等离子体及点爆炸空气冲击波波前运动方程的研究

根据激光等离子体空气冲击波在自由空间中传播的约束条件导出的空气冲击波前运动方程与点爆炸波泰勒解进行比较,证明泰勒解是该冲击波波前传播方程在中场的近似形式.并将该冲击波运动方程与强爆炸空气冲击波的实验进行比较,计算结果与实验数据符合得非常好 关键词： 激光 核爆炸 等离子体冲击波