首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 109 毫秒
1.
在前人工作的基础上,建立了非牛顿幂律流体有界双重介质试井模型.根据模型的特点,提出了相应的特征值问题,求出了特征值和特征函数.定义了油层压力关于空间变量的正交积分变换.根据特征函数系的完备正交性和矩阵微分方程理论,获得了油层压力分布以及井底压力,压力导数的实空间解析解(无穷级数形式).首次直接根据实空间解析解绘制了样版曲线,并在同一张双对数坐标纸上描出拉普拉斯方法制作的样版曲线,同时给出二者间的误差走势图.通过对比分析发现,随着级数项数的增大,根据解析解制作的样版曲线逐渐逼近拉普拉斯方法制作的样版曲线.新疆油田实例证实了该方法的有效性.研究结果进一步补充,完善了试井分析理论.  相似文献   

2.
在分析了实际低速非达西层状油藏DST测试非自喷井渗流规律的基础上,导出了其有效井径数学模型.利用Laplace变换及特殊物理方程理论,导出了该模型的拉氏空间解析解,并利用简便的Stehfest数值算法进行数值反演,得出了实空间解,并绘制了无因次样板曲线.可有效的运用于现场DST段塞流试井分析.  相似文献   

3.
本文建立了裂缝、洞与井筒连通的三重介质油藏的试井解释模型,利用Laplace变换和构造通解法,研究了这一类线性偏微分方程的边值问题,得到了其Laplace空间解,为裂缝、洞与井筒连通油藏的试井分析提供了坚实的理论基础。  相似文献   

4.
研究聚合物驱注聚井和采油井井底压力变化对于评价聚合物驱油时储层物性变化具有重要的意义.基于渗流力学基本原理,针对不同的井建立非牛顿-牛顿以及牛顿-非牛顿双区复合油藏试井解释数学模型,利用Laplace积分变换等数学方法获得Laplace空间解析解,根据这两种模型解结构的相似性,采用高斯消元求得不同模型的井底压力,再利用Stehfest数值反演绘制双对数曲线.根据压力导数曲线特征该模型分为五个阶段.幂律指数越大,非牛顿幂律流体径向流阶段压力导数曲线斜率越小.方法可以方便的求解聚合物驱所形成的复合油藏压力解.  相似文献   

5.
针对天然裂缝性页岩气藏,研究了3种外边界条件(无穷大、定压、封闭)及内边界条件下的定产量生产问题,并建立了考虑应力敏感性和解析吸附的不稳定渗流的试井分析模型.先对此模型作线性化处理;然后通过摄动法以及利用Laplace变换,求得线性化后的无因次储层压力的Laplace空间精确解;最后根据解的相似结构理论,给出了求解该模型解结构的步骤,并且定义了3种外边界条件下的相似核函数,发现了此模型在3种外边界条件下精确解之间的相似结构.这项研究不仅为编制试井分析软件提供便利, 提高计算效率,而且对页岩气藏渗流理论的研究具有重要意义,也为页岩气藏渗流模型的求解提供了一种新的方法.  相似文献   

6.
非线性双重介质模型的精确解及动态特征   总被引:4,自引:0,他引:4  
考虑了二次梯度项的非线性双重介质模型.在模型中假设岩块和裂缝间的压力差作为初始未知量,在岩块中是拟先态的,从而避免了解联立方程组.利用广义Hankel变换求得了径向流动的解析解,由于解析解是无穷级数,无法得到具体的值.通过数值求解特征值问题,从而算得了窟体的压力值,并探讨了非线性参数和双重介质参数变化时压力的变化规律,给出了典型压力曲线图版,这些结果可用于实际的试井分析.  相似文献   

7.
幂律流体在分形介质中不定常椭圆渗流   总被引:1,自引:0,他引:1  
以椭圆渗流模型为基础,得到了分形油藏中,垂直裂缝井的幂律型非牛顿流体的定常渗流的压力分布公式和产量公式;并用数值差分的方法研究了分形油藏中,垂直裂缝井的不定常渗流,分析了分形参数对不定常压力的影响;同时从平均质量守恒方程出发,得到了相应的不定常渗流的近似解析解。分析表明:用椭圆渗流模型研究垂直裂缝井的渗流,大大简化了渗流问题的复杂性。  相似文献   

8.
考虑压裂多翼裂缝偏心井的实际情况,建立了多翼裂缝偏心井的数学模型.采用Laplace变换和压降叠加原理得到Laplace空间多翼裂缝压裂偏心井井底压力的半解析解.采用非均匀流量法,对井底压力的半解析解进行离散.结合Stehfest数值反演获得实空间井底压力的数值解和产量分布.借助SAPHIR试井分析软件建立了储层的数值试井模型并进行了数值离散计算.将计算结果与该文的半解析模型计算结果进行了对比,验证了该文模型的正确性.结果表明,多翼裂缝压裂偏心井井底压力变化可划分为8个主要流动阶段.最后讨论了裂缝的无因次导流能力、裂缝的不对称因子和井的偏心距对井底压力变化和产量分布特征的影响.  相似文献   

9.
无限大多层油藏渗流问题的解析解及其应用   总被引:2,自引:0,他引:2       下载免费PDF全文
本文对无限大多层油藏有越流的定压生产情形,利用Weber变换方法,给出了产量函数及压力分布函数的解析解.并将计算结果绘成曲线图,这些结果可用于定压生产情形的不稳定试井分试.  相似文献   

10.
羿旭明  叶碧泉 《数学杂志》1996,16(2):179-184
本文利用平面弹性复变方法与解析函数边值问题的基本理论获得了带圆洞的各向异性无穷平面焊接一各向同性圆盘时集中力作用下的解,为边界单元法求解此类问题作好了基本解的准备。  相似文献   

11.
本文用新方法描述了气藏开采中的井筒边界条件,从而建立了均质气藏内真实气体渗流问题的新模型;并在无限大、有界封闭、有界定压三种典型外边界条件下,得出了均质气藏中拟压力函数的精确解析表达式;最后给出了本文的拟压力表达式在气井试井分析中的应用.  相似文献   

12.
根据凝析气在多孔介质中渗流的相态变化特征,建立了凝析油-气不稳定渗流的基本微分方程,同时引入了凝析油-气两相拟压力函数对渗流方程进行了线性化处理;针对形成不同流体区域的凝折气藏、有边水的凝析气藏、岩性尖灭凝析气藏及井底存在污染和改善等多种情况,针对存在过渡区的复合凝析气藏建立了凝折油-气渗流新模型,模型更适合凝析气藏实际情况,并求出了凝析气藏油-气拟压力分布的拉氏空间解析解,确立了对凝析气井进行压力恢复试井的具体解释方法,从而为指导气田的合理开发提供可靠的依据.  相似文献   

13.
复合油藏试井分析解的相似结构   总被引:2,自引:0,他引:2  
针对复合油藏,建立了考虑井筒储集和表皮效应和三种外边界(无穷大、定压、封闭)条件下的试井分析模型;利用Laplace变换,在Laplace空间中得到了储层压力和井底压力分布的精确解;经全面和深入的分析,发现了描述该类油藏在三种外边界条件下的渗流特征的解式之间具有的相似结构,并作了进一步的讨论.这项研究,极大地方便了试井分析软件的编制,对油气藏渗流规律的理论研究也具有深远的意义.  相似文献   

14.
考虑二次梯度项影响的非线性不稳定渗流问题的精确解   总被引:4,自引:0,他引:4  
考虑了二次梯度项影响的非线性径向流动问题的无限大地层和有界地层渗流模型.在井底定流量和定压生产时,对无限大地层及有界地层(包括封闭和定压地层)六种情况,利用广义Weber变换和广义Hankel变换求得了实空间的解析解,分析了非线性压力解与线性压力解的差异,发现在晚时段其差异可达8%以上.因此在试井长时要考虑二次梯度项的影响.  相似文献   

15.
双重介质分形油藏渗流问题   总被引:4,自引:0,他引:4  
将油井有效半径引入双重介质分形油藏渗流问题的内边界之中,从而建立了双重介质分形油藏的一种渗流模型,并在考虑了井筒储集和表皮效应的情况求得了外边界为无限大、有界封闭和有界定压三种情况下双重介质分形油藏压力分布的精确解析表达式,利用拉氏数值反演Stehfest方法分析了双重介质分形油藏压力动态特征,讨论了各种参数对压力动态的影响。  相似文献   

16.
We apply a multiscale method to construct general analytic approximations for the solution of a power law logistic model, where the model parameters vary slowly in time. Such approximations are a useful alternative to numerical solutions and are applicable to a range of parameter values. We consider two situations—positive growth rates, when the population tends to a slowly varying limiting state; and negative growth rates, where the population tends to zero in infinite time. The behavior of the population when a transition between these situations occurs is also considered. These approximations are shown to give excellent agreement with the numerical solutions of test cases. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

17.
The concept of data depth leads to a center-outward ordering of multivariate data, and it has been effectively used for developing various data analytic tools. While different notions of depth were originally developed for finite dimensional data, there have been some recent attempts to develop depth functions for data in infinite dimensional spaces. In this paper, we consider some notions of depth in infinite dimensional spaces and study their properties under various stochastic models. Our analysis shows that some of the depth functions available in the literature have degenerate behaviour for some commonly used probability distributions in infinite dimensional spaces of sequences and functions. As a consequence, they are not very useful for the analysis of data satisfying such infinite dimensional probability models. However, some modified versions of those depth functions as well as an infinite dimensional extension of the spatial depth do not suffer from such degeneracy and can be conveniently used for analyzing infinite dimensional data.  相似文献   

18.
Three methods, old but not so well known, transform an infinite series into a complex integral over an infinite interval. Gauss quadrature rules are designed for each of them. Various questions concerning their construction and application are studied, theoretically or experimentally. They are so efficient that they should be considered for the development of software for special functions. Applications are made to slowly convergent alternating and positive series, to Fourier series, to the numerical analytic continuation of power series outside the circle of convergence, and to ill-conditioned power series.  相似文献   

19.
We have developed an approximate analytic model and a detailed simulation model to study the performance of an ISDN switch with distributed architecture. The analytic model treats the switch as a network of single server and infinite server queues with nonpreemptive priority service, general service times and batch arrivals. The simulation program is written in a distributed and modular way so as to simplify model development and debugging. Also extensive statistical techniques are employed for simulation output validation. It is observed that the analytic and the simulation models are in close agreement for the mean end-to-end delay and in moderately close agreement for the 95th percentile points of the end-to-end delay distribution. The comparisons between the analytic and the simulation models lead us to conjecture that the analytic model would be even more accurate for bigger systems with several hundred processors (where simulation models are too expensive to run). Even though the model assumes Poisson external call arrival process, it is shown that it may be applied with reasonable accuracy even when external call arrivals are non-Poisson. This is due to the fact that the composite message arrival process at a processor or transmission element tends to be close to Poisson even when the external call arrivals are non-Poisson.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号