Hole mobility and lifetime in a smectic liquid crystalline photoconductor of a 2-phenylnaphthalene derivative

We have investigated hole transport properties in the smectic mesophases of a 2-phenylnaphthalene derivative 6-(4'-octylphenyl)-2-dodecyloxynaphthalene in detail by using time-of-flight technique. The transient photocurrents were measured in liquid-crystal cells with various thickness from 5 to 700 microm. They were well defined and nondispersive in the smectic A (SmA) phase up to 500 microm and in the smectic B (SmB) phase within the entire thickness employed, while they exhibited an exponential decay in the SmA phase at 700 microm. The mobilities in the SmA and SmB phases were constant in each mesophase irrespective of the cell thickness, and were 2.5 x 10(-4) and 1.7 x 10(-3) cm2V s, respectively. The hole lifetimes were determined to be 10 ms and longer than 5 ms for the SmA and SmB phases, respectively. We discuss the origin of these lifetimes from the two points of view, i.e., hole trapping by a trace amount of existing impurities and recombination with negative ionic charges. We conclude that impurities are mainly responsible for the present hole lifetime test.     

The refractive index correction to the radiative rate constant in fluorescence lifetime measurements

The dependence of fluorescence decay times upon the refractive index of the solvent has been measured in two types of system: (a) in a single solvent at different temperatures, (b) in different solvents. The results are consistent with an n² dependence of the radiative rate constant, as has been predicted theoretically.     

Excitation pulse deconvolution in luminescence lifetime analysis for oxygen measurements in vivo

Oxygen-dependent quenching of phosphorescence has been proven to be a valuable tool for the measurement of oxygen concentrations both in vitro and in vivo. For biological measurements the relatively long lifetimes of phosphorescence have promoted time-domain-based devices using xenon arc flashlamps as the most common excitation light source. The resulting complex form of the excitation pulse leads to complications in the analysis of phosphorescence lifetimes and ultimately to errors in the recovered pO2 values. Although the problem has been recognized, the consequences on in vivo phosphorescence lifetime measurements have been neglected so far. In this study, the consequences of finite excitation flash duration are analyzed using computer simulations, and a method for the recovery of phosphorescence decay times from complex photometric signals is presented. The analysis provides an explanation as to why different calibration constants are reported in the literature and presents a unified explanation whereby calibration constants are not solely a property of the dye but also of the measuring device. It is concluded that complex excitation pulse patterns without appropriate analysis methods lead to device-specific calibration constants and nonlinearity and can be a potent source of errors when applied in vivo. The method of analysis presented in this article allows reliable phosphorescence lifetime measurements to be made for oxygen pressure measurements and can easily be applied to existing phosphorimeters.     

Development of a narrow-band tunable picosecond dye laser and its application to excited-state lifetime measurement of a chlorinated aromatic hydrocarbon.

The development of a distributed-feedback dye laser, with a pulse width and a line width of 25 ps and 8.78 pm, respectively, is described. Using this nearly Fourier-transform-limited pulse, we measured the first singlet-excited-state lifetime of 1,2,4-trichlorobenzene. The tunable picosecond dye laser developed herein has a potential for the lifetime measurement and the efficient multiphoton ionization of aromatic hydrocarbons with a larger number of chlorine atoms and shorter excited-state lifetimes.     

On-line FFT faradaic admittance measurements application to A.C. cyclic voltammetry

A measurement approach is described and data are presented which demonstrate the ability to effect a.c. cyclic voltammetric measurements with the on-line digital FFT approach to faradaic admittance data acquisition. The equipment utilized enables complete faradaic admittance spectra to be obtained at an effective spectrum acquisition rate of 10 s^?1, so that the d.c. potential range encompassed by a typical cyclic wave can be encompassed with adequate resolution in the E_dc dimension in ≥6 s, approximately. The instrument features dynamic, computerized measurement and compensation of the non-faradaic ohmic resistance and double-layer capacitance contributions to the acquired total cell admittance. Measurements with quasi-reversible systems yield the expected faradaic admittance and phase angle responses over a quite generous bandwidth. Applications to mercury and platinum electrodes are illustrated.     

Design and preparation of a novel fluorescent naphthalimide derivative supramolecular self-assembly system and its bioimaging application

ABSTRACT

A novel fluorescent naphthalimide derivative gelator (N-18) was designed and characterised which could form a stable gel in 1,4-dioxane/H₂O (2/1, v/v), methyl sulfoxide (DMSO), ethanol/H₂O (4/1, v/v), acetone/H₂O (2/1, v/v) and methanol. The self-assembly process of molecule N-18 in the five solvents was carefully investigated by the field emission scanning electron microscope, UV-vis absorption spectra, fluorescence emission spectra, fourier transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD) and water contact angle experiments. Different structures from microbelts to helical nanofibers were formed in the self-assembly process. Hydrogen bonding and π–π stacking interaction were the mainly driving forces for the formation of gel. At the same time, the hydrophobic surface with the contact angles of 133°–142° was observed on the xerogel films N-18 from the above five solvents. Interestingly, molecule N-18 could be applied in bioimaging in a living cell.     

Novel rearrangement reaction of a 6,14-endoethanomorphinan derivative to a benzomorphan derivative

Treatment of 7α-hydroxymethylendoethenomorphinan derivative with trifluoromethanesulfonic anhydride at rt and subsequent toluene reflux afforded a novel lactone by rearrangement reaction. The skeleton of the lactone is analogous to that of the benzomorphan like pentazocine, which is a useful analgesic. The rearrangement reaction opens the door to a facile synthesis from the 4,5-epoxymorphinans to the benzomorphan derivatives. On the basis of careful examination of the reaction intermediates, a reaction mechanism was proposed.     

Dual emission probe for luminescence oxygen sensing: a critical comparison between intensity, lifetime and ratiometric measurements

The characterization of a dual emission sensing luminescence material for water-dissolved oxygen sensing is presented in this paper. The oxygen-sensitive material is based on a dual-emitting luminescent molecule immobilized onto an adequate solid support. The metal chelate formed between the 8-hydroxy-7-iodo-5-quinolinesulphonic acid (Ferron) and aluminium (Al-Ferron) was the selected oxygen-sensitive dual-emitting luminescent complex, while the anionic exchanger Dowex 1X2-200 resin was the selected solid support.When the Al-ferron metal chelate is adsorbed onto the anionic exchanger resin it displays two largely different emission bands. The first is a fluorescence emission band, possessing a decay time in the nanosecond range, and which is insensitive to the oxygen presence (the “reference” signal). The second emission is a long-lived highly sensitive oxygen-quenchable phosphorescent emission. Under some optimised experimental conditions both emissions can be simultaneously measured when the metal chelate is excited with a 390 nm light. Under these conditions, and using the same experimental set-up, oxygen concentration can be obtained by measuring the intensity of the phosphorescent emission, the triplet lifetime of the phosphorescence emission or the ratio between the intensity of the phosphorescence emission and the self-reference signal (fluorescence emission from the immobilized metal chelate).The reliability, the operational characteristics, the stability and the analytical performance characteristics for water-dissolved oxygen sensing are evaluated and critically compared for each measurement principle. Advantages and disadvantages of each measurement scheme for reliable optical sensing will be finally discussed.     

Enantioselective deprotonation of meso-cycloheptanone derivative: application to the synthesis of a potential intermediate for pseudomonic acid B

[reaction: see text] A novel synthetic path to a potential intermediate for the synthesis of pseudomonic acid B was established by employing enantioselective deprotonation of a meso-cycloheptanone derivative bearing hydroxy groups at the 3,4,5,6-positions with lithium (S,S')-alpha,alpha'-dimethyldibenzylamide as a key step.     

Polymer supported calixarene derivative useful for solid-phase synthesis application

A calix[4]arene derivative has been anchored to carboxyl CPG and TentaGel supports by an easily cleavable ester bond and DMT groups allow a simple loading evaluation via UV-vis spectroscopy. The loading of the calixarene on TentaGel resin has also been estimated by HR-MAS NMR experiments. The potential of the polymer supported calixarenes (9 and 10) in solid phase synthesis has been tested by condensation of four thymine nucleotide units onto the upper rim of the calix[4]arene skeleton.     

Extraction of lifetime distributions from fluorescence decays with application to DNA-base analogues

Several important aspects of fluorescence decay analysis are addressed and tested against new experimental measurements. A simulated-annealing method is described for deconvoluting the instrument response function from a measured fluorescence decay to yield the true decay, which is more convenient for subsequent fitting. The method is shown to perform well against the conventional approach, which is to fit a convoluted fitting function to the experimentally measured decay. The simulated annealing approach is also successfully applied to the determination of an instrument response function using a known true fluorescence decay (for rhodamine 6G). The analysis of true fluorescence decays is considered critically, focusing specifically on how a distribution of decay constants can be incorporated in to a fit. Various fitting functions are applied to the true fluorescence decays of 2-aminopurine in water-dioxane mixtures, in a dinucleotide, and in DNA duplexes. It is shown how a suitable combination of exponential decays and non-exponential decays (based on a Γ distribution of decay constants) can provide fits of equal quality to the conventional multi-exponential fits used in the majority of previous studies, but with fewer fitting parameters. Crucially, the new approach yields decay-constant distributions that are physically more meaningful than those corresponding to the conventional multi-exponential fit. The methods presented here should find wider application, for example to the analysis of transient-current or optical decays and in F?rster resonance energy transfer (FRET).     

Intramolecularly sensitized precipitons: a model system for application to metal sequestration

We have investigated light-triggered or catalytically activated precipitation agents and have proposed the name "precipiton" for such molecules or molecular fragments. A phase separation is induced when the precipiton isomerizes to a low-solubility form. In this paper we describe the first intramolecularly activated precipitons. The isomerization process is induced by intramolecular triplet energy transfer from a covalently attached metal complex. As expected, intramolecular sensitization leads to a more rapid isomerization than can be achieved by intermolecular sensitization at accessible concentrations. Two isomeric bichromophoric precipiton species, each containing [Ru(bpy)(3)](2+) and 1,2-bis(biphenyl)ethene units covalently linked together by an ether tether, have been synthesized and characterized, and their photochemical properties have been investigated. The rates of photoisomerization of these complexes, [((Z)-1,2-bis(biphenyl)ethene-bpy)Ru(bpy)(2)](PF(6))(2) (2Z) and [((E)-1,2-bis(biphenyl)ethene-bpy)Ru(bpy)(2)](PF(6))(2) (2E), were compared to those of their untethered analogues, (Z)-1,2-bis(biphenyl)ethene-OTBS (1Z) and (E)-1,2-bis(biphenyl)ethene-OTBS (1E), where ruthenium sensitization occurred through an intermolecular pathway. Upon irradiation with visible light (lambda > or = 400 nm) in degassed solution, 2Z/E and 1Z/E obeyed reversible first-order rate kinetics. The intramolecularly sensitized precipiton 2Z isomerized 250 times faster (k(2Z-->2E) = 1.0 x 10(-3) s(-1) with a 51% neutral density filter) than the intermolecular case 1Z (k(1Z-->1E) = 0.80 x 10(-5) s(-1)). For 1E and 2E, the isomerization rates were k(1E-->1Z) = 11.0 x 10(-5) s(-1) and k(2E-->2Z) = 1.6 x 10(-3) s(-1), respectively. The average Z/E mole ratio at the photostationary state was 62/38 for 2Z/E and 93/7 for 1Z/E. The impetus for this study was our desire to evaluate the possibility of using metal-binding precipitons that would precipitate only upon metal-to-precipiton binding and would be inert to visible light in the absence of metals.     

Preparation of a fluorescent derivative of benzoylecgonine, and preliminary studies of its application to the analysis of urine.

A sensitive high-performance liquid chromatographic method using 3-bromomethyl-6,7-dimethoxy-1-methyl-2(1H)-quinoxalinone (Br-DMEQ) as a fluorescent labeling reagent is described for the determination of benzoylecgonine (BE) and ecgonine (EC). The Br-DMEQ derivatives of BE and EC were separated on a C18 column and detected at 455 nm with excitation at 370 nm. The detection limits of the proposed method were 18.7 fmol for BE and 12.5 pmol for EC at a signal-to-noise ratio of 3. Relative standard deviations of five replicate measurements were 1.94% (10 pmol) and 2.98% (50 pmol) for BE and 6.3% (250 pmol) and 5.62% (1.25 pmol) for EC. This method was applied to the determination of BE in human urine. BE was extracted from urine by solvent extraction with chloroform-isopropyl alcohol (9:1, v/v) solution. Levels of 2.5.10(-8) M BE in urine (25 pmol/ml) could be determined.     

Theoretical analysis and computer simulation of fluorescence lifetime measurements. I. Kinetic regimes and experimental time scales

The configuration-controlled regime and the diffusion-controlled regime of conformation-modulated fluorescence emission are systematically studied for Markovian and non-Markovian dynamics of the reaction coordinate. A path integral simulation is used to model fluorescence quenching processes on a semiflexible chain. First-order inhomogeneous cumulant expansion in the configuration-controlled regime defines a lower bound for the survival probability, while the Wilemski-Fixman approximation in the diffusion-controlled regime defines an upper bound. Inclusion of the experimental time window of the fluorescence measurement adds another dimension to the two kinetic regimes and provides a unified perspective for theoretical analysis and experimental investigation. We derive a rigorous generalization of the Wilemski-Fixman approximation [G. Wilemski and M. Fixman, J. Chem. Phys. 60, 866 (1974)] and recover the 1/D expansion of the average lifetime derived by Weiss [G. H. Weiss, J. Chem. Phys. 80, 2880 (1984)].     

Theoretical analysis and computer simulation of fluorescence lifetime measurements. II. Contour length dependence of single polymers

Fluorescence lifetime measurements in a polymer chain are modeled using a memory function expansion, computer simulations, and simple scaling arguments. Unless the quenching rate is localized and infinitely fast, the fluorescence lifetime is generally not equivalent to the first passage time. The fluorescence lifetime distribution is decomposed into memory functions that can be measured separately in single-molecule experiments. The leading order of the expansion gives the Wilemski-Fixman (WF) approximation, and the convergence of higher order terms determines its validity. Simulations of the fluorescence quenching on a Rouse chain verify the accuracy of the WF approximation at small contact radii, short contour lengths, and small quenching rates. Detailed investigation of the average fluorescence lifetime reveals two competing mechanisms: the independent motion of end-to-end vector, which dominates at small contact radius, and the slowest relaxation of polymer, which dominates at large contact radius. The Wilemski-Fixman rate is used in combination with scaling arguments to predict the dependence of fluorescence lifetime on the contour length. Our predictions for the scaling of the average lifetime with the contour length are in good agreement with both simulations and recent experiments by Eaton and his group [L. J. Lapidus, W. A. Eaton, and J. Hofrichter, Proc. Natl. Acad. Sci. U.S.A. 97, 7220 (2000)].     

Wavelength and lifetime measurements on intercombination transitions in 12- to 14-electron ions of Zn

The VUV spectrum of foil-excited fast Zn ions has been studied in search for the intercombination transitions in Mg I-, Al I- and Si I-like ions. The line identifications are supported by decay curve measurements. The wavelength and lifetime data are compared with available theoretical predictions.     

Laser-induced breakdown spectroscopy for branching ratio and atomic lifetime measurements in singly-ionized neodymium and gallium

Precision laboratory astrophysics measurements can be made in laser-induced plasmas created for laser-induced breakdown spectroscopy. Branching ratios from highly-energetic levels in singly-ionized neodymium may be measured by observing spontaneous emission in laser-induced plasmas in an argon environment at decreased pressures (~ 7.7 mbar). Utilizing a broadband Èchelle spectrometer with a spectral range from 200–840 nm, the spontaneous emission intensities from hundreds of transitions originating in 138 energy levels in Nd I, Nd II, and Nd III have been observed simultaneously, allowing the determination of branching ratios for these energy levels for branches greater than 1% in the visible wavelength range. In this study, eight branching ratios from the 23,229.991 cm^− 1 level in Nd II were measured and compared to previously determined values as a method for optimizing experimental conditions such as buffer gas pressure and observation delay time. The branching ratios of the eight branches were found to be in excellent agreement with three previously determined values from both experiment and theory. A plan to utilize this laser-induced plasma apparatus to measure the lifetime of the 4s5p³P₂ level at 118,727.89 cm^− 1 in singly-ionized gallium using a cascade-photon-coincidence method is also presented. Utilizing a solid Ga target ablated in a helium environment, “start photons” at 541.6 nm from a transition into the 4s5p³P₂ level and “stop photons” at 633.4 nm from a transition out of that Ga II energy level were observed. Single-photon detection will be accomplished using avalanche photodiodes with narrowband interference filters and delay times between the detection of coincident photons from these two transitions will be measured.