A study on dismutation mechanism of superoxide ion by a macrocyclic copper(II) complex of dioxotetraamine

The mechanism of catalytic dismutation of superoxide anion by copper(II) complex of 12-(4′-nitro)-benzyl-1,4,7,10-tetraazacyclotridecane-11,13-dione was studied by using pulse radiolysis and cyclic voltammetry. The redox potential of Cu(II)/Cu(III) was obtained to be E⁰=0.590 V (SCE) in solution of 0.5 mol·dm⁻³ Na₂SO₄. The rate constant of catalytic dismutation was determined to be k_cat=1.9×10⁶ (pH=7.0) and 1.1×10⁶ mol·dm³·s⁻¹ (pH=7.8) by pulse radiolysis and it was suggested that mechanism of catalytic dismutation of O₂⁻ is alternate oxidation and reduction of Cu(II) complex by O₂⁻.     

Photoionization of Ru(bpy)32+ ions in aqueous solutions containing sodium dodecyl sulfate. Influence of ion binding

Sodium dodecyl sulfate (SDS) augments the yield of biphotonic ionization of tris-2,2′-bipyridyl ruthenium(II) ions (3.75×10⁻⁵ mol dm⁻³) in aqueous solution at room temperature to different extents at two different concentration ranges: by a factor 4 at [SDS] just below the critical concentration for precipitation (4.5×10⁻⁴ mol dm⁻³) and by a factor 1.4 at [SDS] above the critical micellar concentration (8×10⁻³ mol dm⁻³). The augmentation of the photoionization yield is explained in terms of ion binding, i.e. electrostatic interaction between Ru(bpy)₃²⁺ ions and dodecyl sulfate ions which results in a partial charge neutralization with the consequence of a decrease in the ionization potential.     

Reduction of iodine by hydroxylamine within the pH range 0.7–3.5

The reduction of iodine by hydroxylamine within the [H⁺] range 3×10⁻¹–3×10⁻⁴ mol.L⁻¹ was first studied until completion of the reaction. In most cases, the concentration of iodine decreased monotonically. However, within a narrow range of reagent concentrations ([NH₃OH⁺]₀/[I₂]₀ ratio below 15, [H⁺] around 0.1 mol.L⁻¹, and ionic strength around 0.1 mol.L⁻¹), the [I₂] and [I₃⁻] vs. time curves showed 2 and 3 extrema, respectively. This peculiar phenomenon is discussed using a 4 reaction scheme (I₂+I⁻⇔︁I₃⁻, 2 I₂+NH₃OH⁺+H₂O→HNO₂+4 I⁻+5 H⁺, NH₃OH⁺+HNO₂→N₂O+2 H₂O+H⁺, and 2 HNO₂+2 I⁻+2 H⁺→2 NO+I₂+2 H₂O). In a flow reactor, sustained oscillations in redox potential were recorded with an extremely long period (around 24 h). The kinetics of the reaction was then investigated in the starting conditions. The proposed rate equation points out a reinforcement of the inhibition by hydrogen ions when [H⁺] is above 4×10⁻² mol.L⁻¹ at 25°C. A mechanism based on ion-transfer reactions is postulated. It involves both NH₂OH and NH₃OH⁺ as the reducing reactive species. The additional rate suppression by H⁺ at low pH would be connected to the existence of H₂OI⁺ in the reactive medium. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 785–797, 1998     

Kinetics and mechanism of oxidation of ethylenediamine and related compounds by diperiodatoargentate (III) ion

The oxidation of ethylenediamine by diperiodatoargentate (III) ion has been studied by stopped‐flow spectrophotometry. Kinetics of this reaction involves two steps. The first step is the complexation of silver (III) with the substrate and is over in about 10 ms. This is followed by a redox reaction in the second step that occurs intramolecularly from the substrate to the silver (III) center. The rate of reduction of silver (III) species by ethylenediamine, ethanolamine, and 1,2‐ethanediol were observed to be 1.2 × 10⁴, 1.1 × 10², and 0.14 dm³ mol⁻¹ s⁻¹, respectively, at 20°C. The reaction rate shows an inverse dependence on [IO] and [OH⁻] in the low concentration range (≤1 × 10^‐3 mol dm⁻³). At higher [OH⁻] (>1 × 10⁻³ mol dm⁻³) the rate of reaction starts increasing and attains a limiting value at very high [OH⁻]. The rate of deamination of ethylenediamine is enhanced by its complexation with silver (III). The involvement of [Ag^III(H₂IO₆) (H₂O)₂] and [Ag^III(H₂IO₆) (OH)₂]²⁻ are suggested as the reactive silver (III) species kinetically in mild basic and basic conditions, respectively. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 286–293, 2000     

Radiotracer study of the adsorption of phosphoric acid on platinized platinum electrodes in the presence of different ions and oxalic acid

Radiotracer study of the adsorption of phosphoric acid on platinized platinum electrodes was carried out under different experimental conditions. The potential and concentration dependence of the adsorption was studied at low concentrations (5×10^?6–6×10^?3 mol dm^?3) in the presence of 1 M HClO₄ supporting electrolyte. A Freundlich type isotherm was found. The effect of different additives was studied. In the presence of Cl^? and HSO₄^? ions and oxalic acid the decrease of the adsorption of H₃PO₄ may be observed. On the other hand Cd²⁺ and Cu²⁺ ions induce the increase of the adsorption of H₃PO₄ in the potential range where their electrosorption takes place.     

Wetting properties of aqueous solutions of hydrophobically modified inulin polymeric surfactant

The contact angles of aqueous solutions of a polymeric surfactant namely hydrophobically modified inulin (INUTEC®SP1) were measured on hydrophilic and hydrophobised quartz glass surfaces using the sessile drop technique. These measurements showed a large difference (>10°) between the advancing contact angle θ ₁ (that is measured immediately after placing the drop on the surface) and the constant contact angle θ ₂ (that is measured 30 minutes after placing the drop). In all the results only the contact angle θ ₂ was subsequently measured. θ versus INUTEC®SP1 concentration C _s curves were obtained at various NaCl concentrations both on hydrophilic and hydrophobic glass surfaces. On hydrophilic glass surface the θ versus C _s curves showed a maximum at a concentration range of 10^–6 to 2?×?10^–5 mol dm^-3 INUTEC®SP1. These curves were shifted to lower values as the NaCl concentration was increased. On such hydrophilic surface the INUTEC®SP1 molecule adsorbs with the polyfructose loops and tails oriented towards the surface leaving the alkyl chains in solution. Saturation adsorption with this orientation occurs at 2?×?10^–5 mol dm^-3 INUTEC®SP1. However, the contact angles remain quite small (<18°) indicating the presence of several hydrophilic glass patches uncovered by surfactant molecules. At C _s?>?2?×?10^–5 mol dm^-3 θ decreases with further increase of the INUTEC®SP1 concentration reaching 5° at the Critical Association Concentration (CAC) of the polymer. This indicates the formation of a bilayer of INUTEC®SP1 molecules with the alkyl chains hydrophobically attached to those of the first layer. On a hydrophobic glass surface, adsorption of INUTEC®SP1 occurs by multi-point attachment with the alkyl chains on the surface leaving the hydrophilic polyfructose loops and tails dangling in solution. This results in a gradual decrease of the contact angle with increase in INUTEC®SP1 concentration, reaching a plateau value (>85°) between 2?×?10^–5 and 2?×?10^–4 mol dm^-3. The large contact angles obtained on adsorption of the polymeric surfactant on a hydrophobic surface indicate the presence of several uncovered hydrophobic patches. These results give a reasonable picture of the adsorption and orientation of the INUTEC®SP1 molecules on both hydrophilic and hydrophobic solid surfaces.     

Ionic liquid-phase asymmetric catalytic hydrogenation: hydrogen concentration effects on enantioselectivity

Molecular hydrogen is almost four times more soluble in the ionic liquid 1-n-butyl-3-methylimidazolium tetrafluoroborate (BMI·BF₄) than in its hexafluorophosphate (BMI·PF₆) analogue at the same pressure. The Henry coefficient solubility constant for the solution BMI·BF₄/H₂ is K=3.0×10⁻³ mol L⁻¹ atm⁻¹ and 8.8×10⁻⁴ mol L⁻¹ atm⁻¹ for BMI·PF₆/H₂, at room temperature. The asymmetric hydrogenation of (Z)-α-acetamido cinnamic acid and kinetic resolution of (±)-methyl-3-hydroxy-2-methylenebutanoate by (−)-1,2-bis((2R,5R)-2,5-diethylphospholano)benzene(cyclooctadiene)rhodium(I) trifluoromethanesulfonate and dichloro[(S)-(−)-2,2′-bis(di-p-tolylphosphino)-1,1′-binaphthyl]ruthenium(II) complexes immobilised in BMI·PF₆ and BMI·BF₄ were investigated. Remarkable effects in the conversion and enantioselectivity of these reactions were observed as a function of molecular hydrogen concentration in the ionic phase rather than pressure in the gas phase.     

Interaction between a stationary mercury electrode and a hydrogen bubble in an aqueous sodium dodecyl sulphate solution

The stability and rupture of thin liquid films formed from an aqueous solution of Na₂SO₄ (0.05 mol dm⁻³) in the presence of 5 × 10⁻⁵ mol dm⁻³ sodium dodecyl sulphate between a stationary mercury electrode and a hydrogen bubble has been investigated as a function of electrode potential. The electrostatic component of disjoining pressure has been calculated using the results of capacity measurement for the mercury-solution interface. Special attention has been paid to films formed on positively charged mercury surfaces. In this case, despite the positive electrode polarization, the outer Helmholtz plane potential is found to be negative due to the high surface activity of the dodecyl sulphate anion. The van der Waals component of disjoining pressure has been calculated on the basis of a double sheath model of the two interacting surfaces, taking into consideration the orientation of the adsorbed surfactant layers at the interfaces. Calculations of the total disjoining pressure can explain film stability at negative mercury potentials, but do not explain film rupture when the polarization of the mercury is positive. The existence of a hydrophobic attractive interaction is postulated in the latter case.     

Kinetics and mechanisms of the reactions of aluminium(III) with β-diketones in aqueous solution

The kinetics and mechanisms of the reactions of aluminium(III) with pentane-2,4-dione (Hpd), 1,1,1-trifluoro pentane-2,4-dione (Htfpd) and heptane-3,5-dione (Hhptd) have been investigated in aqueous solution at 25°C and ionic strength 0.5 mol dm⁻³ sodium perchlorate. The kinetic data are consistent with a mechanism in which aluminium(III) reacts with the β-diketones by two pathways, one of which is acid independent while the second exhibits a second-order inverse-acid dependence. The acid-independent pathway is ascribed to a mechanism in which [Al(H₂O)₆]³⁺ reacts with the enol tautomers of Hpd, Htfpd, and Hhptd with rate constants of 1.7(±1.3)×10⁻², 0.79(±0.21), and 7.5(±1.6)×10⁻³ dm³ mol⁻¹ s⁻¹, respectively. The inverse acid pathway is consistent with a mechanism in which [Al(H₂O)₅(OH)]²⁺ reacts with the enolate ions of Hpd, Htfpd, and Hhptd with rate constants of 4.32(±0.18)×10⁶, 5.84(±0.24)×10³, and 1.67(±0.05)×10⁷ dm³ mol⁻¹ s⁻¹, respectively. An alternative formulation involves a pathway in which [Al(H₂O)₄(OH)₂]⁺ reacts with the protonated enol tautomers of the ligands. This gives rate constants of 2.79(±0.12)×10⁴, 3.86(±0.16)×10⁵, and 8.98(±0.25)×10³ dm³ mol⁻¹ s⁻¹ for reaction with Hpd, Htfpd, and Hhptd, respectively. Consideration of the kinetic data reported here together with data from the literature, suggest that [Al(H₂O)₅(OH)]²⁺ reacts by an associative or associative-interchange mechanism. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 257–266, 1998.     

Hydrogen gas yields in irradiated room-temperature ionic liquids

Yields of H₂ produced by electron beam irradiation were investigated in a series of room-temperature ionic liquids comprising 1-hexyl-3-methylimidazolium, 1-hexyl-4-(dimethylamino)pyridinium, 1-butyl-1-methylpyrrolidinium, triethylammonium or trioctyl(tetradecyl)phosphonium cations associated with bis(trifluoromethylsulfonyl)imide anion. The G(H₂) values ranged from 2.6×10⁻⁸ mol/J for the imidazolium and pyridinium-based ionic liquids to 2.5×10⁻⁷ mol/J for the phosphonium liquid. These results correlate well with yields of gaseous hydrogen in studies of nonionic aliphatic and aromatic organic compounds.     

Electrochemical behaviors and determination of melamine in neutral and acid aqueous media

The electrochemical behaviors of melamine (MEL) were studied at paraffin-impregnated graphite electrode in PBS (pH 7.0) and 0.5 M H₂SO₄. Various methods including UV–vis thin-layer spectroelectrochemistry, infrared spectra (IR) and electrochemicatry have been performed to investigate the characteristics. In 0.1 M PBS (pH 7.0), MEL loses two electrons to form a dication, which couples head-to-head with a neutral molecule of MEL to form a dimer accompanying the production of azocompound, the dimer plays a role of a monomer in the following polymerization. In 0.5 M H₂SO₄, unstable MEL mostly hydrolyzes to form ammeline, ammelide, s-triazine-2,4,6-trion, and tricyanic acid, respectively; The hydrolysis could be accelerated by electrochemical method; Meanwhile, MEL associates tricyanic acid to give a plane molecule cake by hydrogen bonding. The spectra responses of MEL at 205 and 234 nm are linearly increasing in a same concentration range of 1.0 × 10⁻⁷–1.0 × 10⁻⁵ M in 0.5 M H₂SO₄ (determination limit, 1 × 10⁻⁸ and 3 × 10⁻⁸ (3σ)). The proposed method was successfully applied to the determination of MEL in real sample.

     

Kinetic model of induced codeposition of Ni-Mo alloys

The kinetic model of induced codeposition of nickel-molybdenum alloys from ammoniun citrate solution was studied on rotating disk electrodes to predict the behavior of the electrode-position. The molybdate (MoO42-) could be firstly electro-chemically reduced to MoO2, and subsequently undergoes a chemical reduction with atomic hydrogen previously adsorbed on the inducing metal nickel to form molybdenum in alloys. The kinetic equations were derived, and the kinetic parameters were obtained from a comparison of experimental results and the kinetic equations. The electrochemical rate constants for discharge of nickel, molybdenum and water could been expressed as k1(E) = 1. 23 × 109 CNi exp( - 0.198FE/RT) mol/(dm2·s), k2(E) =3.28× 10-10 CMoexp( - 0. 208FE/ RT) mol/(dm2·s) and k3(E) = 1.27 × 10-6exp( - 0.062FE/ RT) mol/(dm2 · s), where CNi and CMo are the concentrations of the nickel ion and molybdate, respectively, and E is the applied potential vs. saturated calomel electrode (SCE). The codeposition p     

AC impedance study on semiconducting properties of anodic plumbous oxide film

The semiconducting properties of anodic film formed on Pb in 4.5mol·dm^?3H₂SO₄ solution (30°C) at 0.9 V (vs. Hg/Hg₂SO₄) for 2 h were studied using AC impedance method. The phase composition of the film is PbSO₄ and PbO·PbSO₄. The semiconducting properties are due to the latter. The Mott-Schottky plots show that the said film is an n-type semiconductor with flat-band potential of ?0.9 V (vs. Hg/Hg₂SO₄) and donor density of 1×10¹⁶ cm^?3. The surface density measured at 410–2500 Hz is (2–5)×10¹² cm^?2 eV^?1.     

Pulsed amperometric detection of sulfur compounds: Part II. Dependence of response on adsorption time

A mathematical model is developed for the response of PAD and is applied to data from the study of I_p as a function of t_ads for evaluation of the adsorption rate constants, and the maximum molar surface coverage for thiourea at a Pt electrode. The results are, respectively: k₁ = 4.1 × 10⁴ M⁻¹ s⁻¹, k₋₁ = 1.9 s⁻¹, and Γ₀ = 1.3 × 10⁻¹⁰ mol cm⁻². The calculated adsorption equilibrium constant (k₁/k₋₁) is 2.1 × 10⁴ M⁻¹, compared to 4.9 × 10⁴ M⁻¹ calculated from the plot of 1/I_p vs. 1/c^b for c^b > 1.0 × 10⁻⁴ M and t_ads = 8500 ms. Analytical calibration procedures are examined; linear plots of 1/I_p vs 1/c^b cannot be expected for cases of mixed transport-isotherm control of detector response.     

Adsorption of tert-butanol at the electrode from concentrated NaClO4 solutions

The parameters of the double layer for tert-butanol adsorption determined in the supporting electrolytes: 2 mol dm^?3, 3 mol dm^?3 and 4 mol dm^?3 NaClO₄, show an increase of tert-butanol adsorption on the mercury electrode together with the increase of NaClO₄ concentration. The adsorption of tert-butanol on the electrode takes place via the ?CH₃ group which is shown by the changes in the values of zero charge potentials, E _z. On the basis of the analysis of the changes of relative surface excess values, Γ′, and the parameters determining the maximum adsorption, the process of adsorption in the discussed systems can be recognized as a physical process. Besides, it can be said that a major drawback in the process of adsorption of the organic substance on the electrode is to remove water from the electrode surface.     

Nature of polarographic catalytic current in the indium-acetylsalicylic acid system

The dependence of the limiting catalytic current in the system of In(III)-acetylsalycilic acid on the concentration of indium ions and the ligand anions was described theoretically. Dissociation and protonation constants of acetylsalycilic acid molecular form and kinetic parameter connected with the rate constant of formation of polarographically active complex {K _a = 3.59×10^?3, mol dm^?3; K _H = 0.12 mol dm^?3; k = 4.0×10², A (mol/dm^?3)²} were calculated.     

Electrochemical behavior of electrodeposited film derived from rhein and its activity towards myoglobin reduction

The stable electroactive thin film of rhein has been investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Electrochemical impedance spectroscopy of the electrodeposited film derived from rhein indicated the electrode reaction was kinetically controlled in the region of higher frequency, the charge transfer resistance was 2.6×10³ Ω cm² and capacitance value was 13.2 μF cm² . The electrodeposited film derived from rhein exhibited a good electrocatalytic activity for myoglobin (Mb) reduction. In 0.30 mol dm⁻³ H₂SO₄solution, the catalysis currents were proportional to the concentrations of Mb over the range of 1.5×10⁻⁷–1.3×10⁻⁵ mol dm⁻³. The detection limit is 1.0×10⁻⁷ mol dm⁻³ (S/N=3). The relative standard deviation is 4.8% for eight successive determinations of 5.0×10⁻⁷ mol dm⁻³ Mb.     

Adsorption of Cl? ions on electrodeposited rhodium black layer (rhodized electrode) at low concentrations

The adsorption of Cl^– ions on rhodium black layer (rhodized electrodes) was studied by radiotracer technique at low Cl^– ion concentrations (c10^–5 mol dm^–3) in 1 mol dm^–3 H₂SO₄ supporting electrolyte. The specific adsorption of Cl^– ions was treated in terms of partition between solution phase and electrodeposited Rh black layer. The potential dependence of the partition coefficient is determined.     

A Hydrogen Peroxide Biosensor Based on Room Temperature Ionic Liquid Functionalized Graphene Modified Carbon Ceramic Electrode

A room temperature ionic liquid (IL) 1‐butyl‐3‐methylimidazolium hexafluorophosphate functionalized graphene (GE) was prepared and a hydrogen peroxide (H₂O₂) biosensor was fabricated by immobilizing hemoglobin (Hb) into the IL‐GE composite film. UV‐visible and Fourier transform infrared spectra of the composite film indicated that Hb retained its native structure in the film. Electrochemical investigation of the biosensor showed a pair of well‐defined, quasi‐reversible redox peaks with E_pa=?0.209 V and E_pc= ?0.302 V (vs. SCE) in pH 7.0 phosphate buffer solution at the scan rate of 100 mV/s. To the reduction of H₂O₂, the biosensor had a good linear range from 8.0×10^?7 to 1.8×10^?4 mol/L with a detection limit of 3.0×10^?7 mol/L. The apparent Michaelis‐Menten constant K^app_M was estimated to be 3.4×10^?5 mol/L.