Electrochemical determination of N,N-dimethyl-4-amino-4′-aminoazobenzene

N,N-Dimethyl-4-amino-4′-aminoazobenzene has been determined using differential pulse polarography. Fast-scan modification and linear-scan voltammetry at a hanging mercury drop electrode was used with a detection limit of less than 10⁻⁸ mol liter⁻¹. Differential pulse polarography was then used to analyze mixtures of the above depolarizer with azobenzene and N,N-dimethyl-4-aminoazobenzene, either directly, or after a TLC separation.     

Synthesis of macrocyclic systems from 4,4′-diamino-3,3′-bi-1,2,5-oxadiazole and 3(4)-amino-4(3)-(4-amino-1,2,5-oxadiazol-3-yl)-1,2,5-oxadiazole 2-oxides

Oxidative cyclocondensation of 4,4′-diamino-3,3′-bi-1,2,5-oxadiazole and isomeric 3(4)-amino-4(3)-(4-amino-1,2,5-oxadiazol-3-yl)-1,2,5-oxadiazole 2-oxides under the action of dibro-moisocyanurate gave 12- and 18-membered macrocyclic systems containing two or three bifurazanyl or furazanylfuroxanyl moieties linked by azo bridges. The latter were oxidized into azoxy groups with Caro’s acid in 20% oleum. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 631–638, March, 2008.     

Synthesis,characterization, and structures of copper(I) complexes with N,N′-bis[1-(4-chlorophenyl)ethylidene]ethane-1,2-diamine and N,N′-bis[1-(4-nitrophenyl)ethylidene]ethane-1,2-diamine

Two ligands, N,N′-bis[1-(4-chlorophenyl)ethylidene]ethane-1,2-diamine (L¹ ) and N,N′-bis- [1-(4-nitrophenyl)ethylidene]ethane-1,2-diamine (L² ) and their corresponding copper(I) complexes, [Cu(L ¹)₂]ClO₄ (1) and [Cu(L ²)₂]ClO₄ (2), have been synthesized and characterized by CHN analyses, ¹H-NMR, IR, and UV–Vis spectroscopy. The crystal structures of L¹ and [Cu(L ¹)₂]ClO₄ (1) were determined from single crystal X-ray diffraction. L¹ lies across a crystallographic inversion center and the C=N is approximately coplanar with the benzene ring and adopts E configuration. The coordination polyhedron about copper(I) in 1 is best described as a distorted tetrahedron. Quasireversible redox behavior is observed for the complexes.     

Characterization and crystal structures of solvated N′-(4-hydroxy-3-nitrobenzylidene)-3-methylbenzohydrazide and N′-(4-dimethyl-aminobenzylidene)-3-methylbenzohydrazide

Two new solvated benzohydrazone derivatives N′-(4-hydroxy-3-nitrobenzylidene)-3-methylbenzohydrazide-methanol-water (2/1/1) 2(C₁₅H₁₃N₃O₄)·CH₃OH·H₂O (1) and N′-(4-dimethylamino-benzylidene)-3-methylbenzohydrazide methanol monosolvate C₁₇H₁₉N₃O·CH₃OH (2) are prepared and characterized by elemental analysis, ¹H and ¹³C NMR, and single crystal X-ray diffraction. Compound 1 crystallizes in the monoclinic space group P2₁/c with unit cell dimensions a = 17.084(2) Å, b = 12.706(1) Å, c = 15.412(1) Å, β = 113.207(1)°, V = 3074.1(4) ų, Z = 4, R ₁ = 0.0567, and wR ₂ = 0.1209. Compound 2 crystallizes in the monoclinic space group P2₁/n with unit cell dimensions a = 15.058(1) Å, b = 6.658(1) Å, c = 17.211(2) Å, β = 94.189(2)°, V = 1720.8(3) ų, Z = 4, R ₁ = 0.0611, and wR ₂ = 0.1594. X-ray diffraction indicates that the asymmetric unit of 1 contains two independent benzohydrazone molecules, one methanol and one water molecules. The asymmetric unit of 2 contains one benzohydrazone molecule and one methanol molecule. Benzohydrazone molecules of the compounds display trans configurations with respect to the C=N double bonds. The crystal structures of the compounds are stabilized by hydrogen bonds and weak π...π interactions.     

Efficiency and Aging Comparison Between N,N′-Bis (3-methylphenyl)-N,N′-diphenylbenzidine (TPD) and N,N′-Di-[(1-naphthalenyl)-N,N′-diphenyl]-1,1′-biphenyl-4,4′-diamine (NPD) Based OLED Devices

In this paper we present and discuss experimental results to evaluate performances and aging behaviour of two Hole Transporting Material (HTM), TPD and NPD, in Organic Light Emitting Device (OLED) with structure: ITO/HTM/Alq3/Al. For each of these HTMs, devices with several thicknesses have been built, to measure and emphasize behaviours of material-geometry combinations. Electro-optical properties have been measured to estimate and compare brightness, power efficiency and aging decays.     

Tricarbonylrhenium(I) bromide complexes with N,N′-bis[1-(4-chlorophenyl)ethylidene]ethane-1,2-diamine and N,N′-bis[1-(4-nitrophenyl)ethylidene]ethane-1,2-diamine–syntheses,structures, electrochemical and spectroscopic studies

Two rhenium(I) complexes, [Re(CO)₃Br(L ⁿ )] (n = 1, 2), (L¹= N,N′-bis[1-(4-chlorophenyl)ethylidene]ethane-1,2-diamine and L² = N,N′-bis[1-(4-nitrophenyl)ethylidene]ethane-1,2-diamine) have been synthesized and characterized by CHN analyses, ¹H NMR, IR, and UV-Vis spectroscopy. The molecular structure of [Re(CO)₃Br(L¹)] is a distorted octahedron around rhenium with one Br, facial arrangement of three CO's, and one diimine. The UV-Vis spectra of the complexes have metal-to-ligand charge transfer bands increasing in wavelength when the L² ligand is replaced by L¹, in agreement with the oxidation potential of the complexes.     

Synthesis and reactions of 4-amino-3-carbethoxy-1,2-dihydrospiro(naphthalene-2,1′-cyclopentane)

Addition of benzylmagnesium chloride to cyclopentylidenecyanoacetic ester gives 1-benzyl-1-(cyanocarbethoxymethyl)cyclopentane and this can be cyclized to 4-amino-3-carbethoxy-1,2-dihydrospiro-(naphthalene-2,1-cyclopentane). Acylation of the obtained aminoester with carboxylic acid chlorides produces the corresponding amides (which can react with an excess of benzoyl chloride). It can also react with orthoformic ester. In both cases the product can then react with hydrazine hydrate. Treatment of the same aminoester with caprolactam gives a tetrahydrospiro(benzo[h]quinazoline-5,1-cyclopentane) derivative.A. L. Mndzhoyan Institute of Fine Organic Chemistry, National Academy of Sciences of the Republic of Armenia, Yerevan 375014. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 820–823, June, 1998.     

Thermal decomposition kinetics of polymeric complexes of copper(II) and mercury(II) with N,N′-bis(dithiocarboxy)piperazine

The thermal decomposition behaviour of polymeric complexes of Cu(II) and Hg(II) with N,N-bis(dithiocarboxy)piperazine is investigated in air by thermogravimetric (TG), derivative thermogravimetric (DTG) and differential thermal analysis (DTA) techniques. The kinetic parameters (non-isothermal method) for their decomposition have been evaluated by graphical as well as by least-squares methods. The equations of Coats-Redfern, Freeman-Carroll and Horowitz-Metzger have been applied. The results indicate that the values ofE,A and S obtained by these three different methods agree well. It was also found that the decomposition of these metal chelates follow first-order kinetics.

---

Zusammenfassung Mittels TG, DTG und DTA wurde das thermische Zersetzungsverhalten von Polymerkomplexen aus Cu(II) bzw. Hg(II) mit N,N-Bis(dithiocarboxy)piperazin an Luft untersucht. Für ihre Zersetzung (nichtisotherme Methode) wurden die kinetischen Parameter sowohl graphisch als auch durch Methoden mit den kleinsten Fehlerquadraten ermittelt. Dabei wurden die Gleichungen von Coats-Redfern, Freeman-Carroll und von Horowitz-Metzger angewendet. Alle drei Verfahren zeigen übereinstimmende Resultate fürE, A undS. Es wurde weiterhin gefunden, daß diese Metallchelate einer Reaktion erster Ordnung unterliegen.

---

---

The authors are thankful to Prof. C. G. R. Nair, Head of the Department of Chemistry, University of Kerala and Dr. M. P. Kannan, Department of Chemistry, University of Calicut for some helpful discussions.     

Synthesis,characterization and anti-microbial activity of poly(ethylene oxamide- N,N ′-disuccinate) and its polymer metal complexes

Poly(ethylene oxamide-N,N′-disuccinate), abbreviated as (PEODS), has been synthesized by condensation of oxamide-N,N′-disuccinic acid and 1,2-ethylene glycol. Coordination polymers were synthesized by the reaction of (PEODS) with hydrated acetates of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II). The resulting polyester-metal complexes were characterized by elemental analysis, UV-Visible, FT-IR, ¹H-NMR, ESR spectroscopy and magnetic susceptibilities. Thermal behavior of all the synthesized compounds revealed that polymer metal complexes are more stable than the polymeric ligand. In addition all the synthesized polymers were screened for anti-bacterial activity against B. subtelillisr, B. megaterium, S. aureus, E. coli, S. typhi, P.?aeruginosa, S. boydii and for antifungal activity against C. albicans, T. species, A. flavus, A. niger, F. species, M. species, and P. species by agar well diffusion methods. All the polymers showed good anti-bacterial and anti-fungal activity, which increased on coordination with the metal ions.     

Microwave promoted one-pot synthesis of 3-(2′-amino-3′-cyano-4′-arylpyrid-6′-yl)coumarins

A facile procedure for the synthesis of 3-(2′-amino-3′-cyano-4′-arylpyrid-6′-yl)coumarins are being reported starting from 3- acetylcoumarin,aromatic aldehydes and malononitrile.The reactions were carded out on microwave irradiation in good yield with short time and easy work-up.The structures of all the compounds have been confirmed on the basis of their analytical,IR,~1H NMR, and mass spectral data.     

Synthesis and antitumor activity of water-soluble poly(aminoheterocyclic amine)s (I): N,N,N'''',N''''-tetra[2-(4-amino-5-substituted-s-triazol-3-yl sulfanyl)ethyl] -1,4-benzyldiamine salts

Five water-soluble poly(aminoheterocyclic amine)s containing s-triazole ring were synthesized as respective HC1 salts (5a-5e). Biological activities in L1210 (murine leukemia) and Chinese hamster ovary (CHO) cell lines were investigated via IC50 cytotoxicity determinations. The tide compounds represented moderate cytotoxicity (low IC50 values between 15 and 68μmol/L) in L1210 but high cytotoxicity (lower IC50 values: 0.25,0.018,0.014μmol/L for Sa-5e, respectively) in CHO cell lines, while the corresponding HC1 salts of the intermediates (3a-3e) without polyamine tether and starting materials amino-s-triazoles (1a-1e) showed poor or no activities against the above cell lines.     

Synthesis and characterization of optically active poly(amide-imide)s based on [N,N′-(4,4′-carbonyldiphtaloyl)-bis-lamino diacid]s and 1,5-bis(4-aminophenyl)penta-1,4-dien-3-one

Six dicarboxylic acids 3a-3f were synthesized by the reaction of 3,3’,4,4’-benzophenonetetracarboxylic dianhydride 1 with L-aminoacids 2a-2f in a solution of glacial acetic acid/pyridine(Py) at refluxing temperature.Then six new poly(amide-imide)s PAIs were synthesized from the direct polycondensation reaction of[N,N’-(4,4’- carbonyldiphtaloyl)-bis-L-amino diacid]s with 1,5-bis(4-aminophenyl)penta-1,4-dien-3-one(APPD).The polymerization reactions produced a series of new optically active PAIs with high yield and good inherent viscosity.Also these PAIs are optically active and soluble in various organic solvents.These resulting new polymers can be used in column chromatography for the separation of enantiomeric mixtures.The resulted polymers were fully characterized by means of FTIR and ~1H-NMR spectroscopy,elemental analyses,inherent viscosity measurements,solubility tests and thermogravimetric analysis(TGA).     

Poly(N,N′-dichloro-N-ethyl-benzene-1,3-disulfonamide, N,N,N′,N′-tetrachlorobenzene-1,3-disulfonamide, poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide, and N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide catalyzed formylation of amines and alcohols using ethyl formate under microwave irradiation

A simple, rapid, and efficient procedure for formylation of primary and secondary amines and alcohols using ethyl formate catalyzed with poly(N,N′-dichloro-N-ethyl-benzene-1,3-disulfonamide (PCBS), N,N,N′,N′-tetrachlorobenzene-1,3-disulfonamide (TCBDA), poly(N,N′-dibromo-N-ethyl-benzene-1,3-disulfonamide (PBBS) and also N,N,N′,N′-tetrabromobenzene-1,3-disulfonamide (TBBDA) was adopted. The reactions were performed under microwave irradiation with high yields.     

Crystal structures,Hirshfeld analysis,and energy framework analysis of two differently 3′-substituted 4-methylchalcones: 3′-(N=CHC6H4-p-CH3)-4-methylchalcone and 3′-(NHCOCH3)-4-methylchalcone

Two crystal structures of chalcones, or 1,3-diarylprop-2-en-1-ones, are presented; both contain a p-methyl substitution on the 3-Ring, but differ with respect to the m-substitution on the 1-Ring. Their systematic names are (2E)-3-(4-methylphenyl)-1-(3-{[(4-methylphenyl)methylidene]amino}phenyl)prop-2-en-1-one (C₂₄H₂₁NO) and N-{3-[(2E)-3-(4-methylphenyl)prop-2-enoyl]phenyl}acetamide (C₁₈H₁₇NO₂), which are abbreviated as 3′-(N=CHC₆H₄-p-CH₃)-4-methylchalcone and 3′-(NHCOCH₃)-4-methylchalcone, respectively. Both chalcones represent the first reported acetamide-substituted and imino-substituted chalcone crystal structures, adding to the robust library of chalcone structures within the Cambridge Structural Database. The crystal structure of 3′-(N=CHC₆H₄-p-CH₃)-4-methylchalcone exhibits close contacts between the enone O atom and the substituent arene ring, in addition to C…C interactions between the substituent arene rings. The structure of 3′-(NHCOCH₃)-4-methylchalcone exhibits a unique interaction between the enone O atom and the 1-Ring substituent, contributing to its antiparallel crystal packing. In addition, both structures exhibit π-stacking, which occurs between the 1-Ring and R-Ring for 3′-(N=CHC₆H₄-p-CH₃)-4-methylchalcone, and between the 1-Ring and 3-Ring for 3′-(NHCOCH₃)-4-methylchalcone.     

Extraction and Mutual Separation of Actinide(III), (IV), (V) and (VI) Ions by N,N′-Dimethyl-N,N′-Dihexyl-3-Oxapentanediamide and Thenoyltrifluoroacetone

Actinide(III), (IV), (V) and (VI) ions were extracted by N,N-dimethyl-N,N-dihexyl-3-oxapentanediamide (DMDHOPDA) and thenoyltrifluoroacetone (HTTA). The extraction behaviors suggested the possibility of the mutual separation, and the convenient separation method of actinide ions (III), (IV), (V) and (VI) without reducing and oxidizing agents was studied. Th(IV) was extracted from the aqueous phase by HTTA (5 mM in toluene) in the first step. The Am(III) and U(VI) ions can be extracted by 1 and 20 mM DMDHOPDA in toluene, and the Np(V) ion can be extracted into nitrobenzene with 100 mM DMDHOPDA in the last step. The residual activities in the aqueous phase were much lower than the initial activities. These activities in the fractions were confirmed by the gamma- and the alpha-spectrometry. The one-through and rough separation is advanced, and in case of the fine isolation of actinide elements, each fraction should be purified in more detail.     

1′-Azido- and 1′-amino-1,3-dioxolan-4-ones

1,3-Dioxolanone alcohols, prepared via the addition of chiral lithium enolates of 1,3-dioxolan-4-ones to aldehydes, are suitable intermediates for the synthesis of chiral trisubstituted isoserines or trisubstituted 3-hydroxy-β-lactams. In particular, the methyl ester of 2-methyl-3-(2-furyl)isoserinic acid and two 3-methyl-3-hydroxy-β-lactams bearing either a 2-furyl or a phenyl substituent at C-(4) have been prepared. The (2R,3S) stereochemistry of the isoserine, and the (3R,4S) stereochemistry of the two β-lactams is that required for the synthesis of taxoid analogues having the side-chain with the proper (2′R,3′S) configuration.     

Synthesis and Structure of Cobalt(III) Complex with Cyanomethylene and N,N′-Ethylenebis(3-methylsalicylideneiminate)

Russian Journal of General Chemistry - The new complex [CoIII(3-CH3Salen)(CH2CN)]·CH3CN was synthesized and its crystal structure was determined by the X-ray diffraction analysis. The...     

Synthesis and molecular and crystal structure of 3-(1-amino-2,2,2-trifluoroethylidene)-2-imino-1,1,4,5,6,7-hexafluoroindan and its N-methyl and N,N′-dimethyl derivatives

3-(1-Amino-2,2,2-trifluoroethylidene)-2-imino-1,1,4,5,6,7-hexafluoroindan (2) and its N-methyl and N,N′-dimethyl derivatives were synthesized by the reaction of perforo-1-ethylideneindan with ammonia and methylamine or by methylation of compound 2 with dimethylsulfate. Single crystals were grown and the molecular and crystal structure of the emaninoimine products was investigated. The density functional theory (DFT) quantum chemical calculations were performed to determine possible tautomeric equilibrium of the emaninoimine products.     

Synthesis,crystal structure and reactivity of trans-diaquo N,N′-ethylenebis-(3-methoxysalicylideneiminato)chromium(III)

A new chromium(III) Schiff base complex, [Cr(3-methoxysalen)(H₂O)₂]ClO₄, where salen=N,N-ethylenebis- (salicylideneimine), has been synthesized and characterized by spectroscopic techniques. Single crystal X-ray data reveals that the complex assumes a trans-diaquo structure with formulation [Cr(C₁₈H₂₂N₂O₆)]ClO₄ but, unlike in Cr (salen)(H₂O)₂ ⁺, the two trans-water molecules are equidistant from Cr^III. The effect of the substituent on the phenyl ring in respect of redox reactivity has been investigated. The kinetics of the oxidation of [Cr(Schiff base)- (H₂O)₂]ClO₄, where Schiff base=salen, (1) and 3-OMe-salen, (2) by PhOI has been studied. The bimolecular rate constant for the formation of the O=Cr^v Schiff base in case of (2) was four times faster than that of (1). The introduction of the OMe group substituent on the phenyl ring influences not only the structure and crystal packing, but also the reactivity of the complex and the electronic environment around the metal ion.