液固相水热法制备氧化硅纳米线

利用液固相水热反应方法, 以硅溶胶为硅源, 在三价铁辅助下与乙二胺的水溶液在180 ℃反应4 d后生成具有P21212空间群结构的单晶氧化硅纳米线. 用扫描电子显微镜、透射电子显微镜和多晶X射线衍射对制备的样品进行了表征, 系统研究了有机胺、金属盐、反应时间及反应温度等条件对氧化硅纳米线生长的影响. 结果表明, 随着有机胺碳链的增长, 产物形貌逐渐由纳米线转变为纳米片; 金属阳离子的存在对纳米线形貌有较大的影响, 而阴离子的存在并不影响纳米线的生成; 过低的铁含量导致反应进行不完全, 而过多的铁盐加入则会导致反应中剩余铁氧化物吸附到氧化硅纳米线表面, 进而影响到产物纯度; 反应时间延长及反应温度的提高都有利于氧化硅纳米线的生长. 最佳反应条件为: 有机胺为乙二胺, 硝酸铁为铁源, 硅溶胶为硅源, 硅/铁摩尔比为1∶0.4, 乙二胺与水的体积比为8∶5, 温度为180 ℃.     

Synthesis and magnetic relaxation properties of a porous glass magnetic microcarrier

The reaction of formation of magnetic iron oxide nanoparticles from aqueous solutions of Fe(+2,+3) salts was studied under homo- and heterophase conditions of capillary-porous bodies by the nuclear magnetic resonance relaxometry method. Magnetic composites based on Bio-Glas porous glasses were obtained by precipitation of iron oxide nanoparticles in pores ranging in size from 50 to 250 nm. The magnetic relaxation rate of water protons during the heterophase precipitation reaction was examined.     

EIS analysis on the anodic dissolution kinetics of pure iron in a highly alkaline solution

The anodic dissolution kinetics of pure iron in a highly alkaline solution was systematically studied by EIS. A model based on its reaction mechanism was proposed, which can well explain the characteristics of EIS. From the model, it was found that the Fe(III) oxide covered on the iron surface was firstly electrochemically oxidized to an adsorbed Fe(V) intermediate, the latter then converted to the final Fe(VI) product and the initial Fe(III) reactant through a disproportionating reaction. The kinetic constants of each step as well as the covering densities of the Fe(III) reactant and the Fe(V) intermediate at different potentials were calculated from the EIS model.     

Magnetic carbon nanotubes: synthesis by electrostatic self-assembly approach and application in biomanipulations

Magnetic multiwalled carbon nanotubes (MWNTs) were facilely prepared by the electrostatic self-assembly approach. Poly(2-diethylaminoethyl methacrylate) (PDEAEMA) was covalently grafted onto the surfaces of MWNTs by MWNT-initiated in situ atom transfer radical polymerization (ATRP) of 2-diethylaminoethyl methacrylate (DEAEMA). The PDEAEMA-grafted MWNTs were quaternized with methyl iodide (CH(3)I), resulting in cationic polyelectrolyte-grafted MWNTs (MWNT-PAmI). Magnetic iron oxide (Fe(3)O(4)) nanoparticles were loaded onto the MWNT surfaces by electrostatic self-assembling between MWNT-PAmI and Fe(3)O(4), affording magnetic nanotubes. The assembled capability of the nanoparticles can be adjusted to some extent by changing the feed ratio of Fe(3)O(4) to MWNT-PAmI. The obtained magnetic nanotubes were characterized with TEM, EDS, STEM, and element mapping analyses. TEM and EDS measurements confirmed the nanostructures and the components of the resulting nanoobjects. The magnetic nanotubes were assembled onto sheep red blood cells in a phosphate buffer solution, forming magnetic cells. The blood cells attached with or without magnetic nanotubes can be selectively manipulated in a magnetic field. These results promise a general and efficient strategy to magnetic nanotubes and the fascinating potential of such magnetic nanoobjects in applications of bionanoscience and technology.     

纳米Fe2O3/膨润土复合催化剂的制备及光催化活性

Using the surfactant（PVA）in the preparation process,the nano-iron oxide / Bentonites were prepared through a reaction between a solution of iron salt and a dispersion of Bentonite clay. The X-ray diffraction（XRD）results reveal that the catalysts mainly consist of α-Fe2O3 . The photo-catalytic activity of iron oxide / Bentonites was examined in the photo-assisted degradation of an organic azo-dye Orange Ⅱ. It is found that the photo-catalytic activity of the catalysts is much higher than that of α-Fe2O3 . The experimental results（using the different catalysts in which the quantities of Fe2O3 are equal）demonstrate that the photo-catalytic activity of catalysts is as follows:Fe-A > Fe-B > Fe-C > Fe-D. In addition,the research shows that Orange Ⅱ degradation ratio of heterogeneous photo-Fenton process is higher than that of homogeneous one.     

Hydration/expansion and cation charge compensation modulate the Brønsted basicity of distorted clay water

This letter addresses how iron redox cycling and the hydration properties of the exchangeable cation influence the Br?nsted basicity of adsorbed water in 2:1 phyllosilicates. The probe pentachloroethane undergoes facile dehydrochlorination to tetrachloroethene, attributed to increases in the Br?nsted basicity of near-surface hydrating water molecules following the reduction of structural Fe(III) to Fe(II). This dehydrochlorination process is studied in the presence of Na(+)- or K(+)-saturated Upton montmorillonite [(Na0.82 (Si7.84 Al0.16)(Al3.10 Fe(3+)0.3 Mg0.66) O20 (OH)4] or ferruginous smectite [(Na0.87 Si7.38 Al0.62)(Al1.08) Fe(3+)2.67 Fe(2+)0.01 Mg0.23) O20 (OH)4]. The effect of iron redox cycling on pentachloroethane dehydrochlorination is studied using reduced or reduced and reoxidized smectite samples saturated with Na+ (fully expanded clay) or K+ (fully collapsed clay). Variations in the clay Br?nsted basicity following Na+ -for- K+ exchange are explained by cationic charge compensation or interlayer hydration/expansion imposed by the nature of the exchangeable cation. Inverse relations between K+ fixation and clay water content as well as trends in pentachloroethane transformation indicate that increases in the Br?nsted basicity result from increases in the clay hydrophilicity and shifts in the local activity of distorted clay water. Potassium fixation causes partially collapsed smectites bearing low amounts of structural Fe(II) to have a similar reactivity to that of fully expanded smectites (Na+ form) bearing higher amounts of structural Fe(II). In particular, the conversion of up to 80% of the pentachloroethane to tetrachloroethane by K+ -saturated, reoxidized Upton was explained because the fixation of K+ causes nonreversible expansion and incomplete reoxidation of structural Fe(II), which contributes to the stabilization of charge density near sites bearing Fe(II). Higher pentachloroethane conversions by Upton montmorillonite over ferruginous smectite, however, suggest that charge dispersion rather than site specificity contributes predominantly to clay reactivity. Thus, clay interlayer hydration/expansion imposed by the nature of the exchangeable cation alters water dissociation and proton exchange in Fe(II)-Fe(III) phyllosilicates susceptible to iron redox cycling.     

A study of the tungsten-hydroquinone color: Spectrophotometric determination of tungsten in tungsten steels

The red color produced by tungsten and hydroquinone in a concentrated sulfuric acid medium was studied. Various factors affecting the color were examined including the effects of phosphoric acid, water, hydrochloric acid, tin(II) chloride, and wavelength of measurement. The interferences from iron, molybdenum, vanadium, and titanium were studied. A method is described for the determination of tungsten in tungsten steels that involves precipitation of the tungsten with cinchonine. ignition to tungstic oxide, dissolution of the tungstic oxide in sodium hydroxide, and development of the tungsten hydroquinone color on an aliquot of the solution.     

Facile-fabricated iron oxide nanorods as a catalyst for hydrogenation of nitrobenzene

Iron oxide nanorod catalysts were fabricated by wet chemistry method followed annealing. The facilefabricated FeOOH nanorods with an efficient catalytic performance for transfer hydrogenation of nitrobenzene with hydrazine hydrate are presented.     

Oxide Transformation During Preparation of Black Pottery in Hungary

Traditional black pottery produced in Nádudvar, E-Hungary, was studied by ⁵⁷Fe Mössbauer spectroscopy, X-ray diffractometry and microscopy. Quartz, feldspar, clay minerals (kaolinite, smeetite, illite) and calcite were identified in the basic clay material by X-ray diffractometry (XRD). Mössbauer spectroscopy (MS) of the original clay revealed that about 35% of iron compounds were present in goethite while the rest in clay minerals (illite and smectite). After firing the clay in air using an electric furnace (red pottery is prepared in the same way), the Mössbauer spectra showed hematite as the only iron oxide or hydroxide phase, being in good agreement with X-ray diffractometry. In the black product itself, fired in the traditional open-flame furnace, the Mössbauer spectra reflected the presence of iron in magnetite and in sheet silicates with approximately the same relative ratio of oxides and silicates as in the starting material. This can be interpreted as a result of the transformation of goethite to hematite in the first step of firing (in air), and as a reduction of hematite to magnetite in the second step of firing (closed from air). A significant difference was found in the distribution of iron at the Fe²⁺ and Fe³⁺ cation sites in the black surface (more Fe²⁺) and at the dark gray bulk of the fired pottery (less Fe²⁺), showing that the reduction of Fe³⁺ occurs in the silicates instead of further reduction of the magnetite (e.g., to wüstite).     

Spectroscopic study on sorption of hydrogen sulfide by means of red soil

This paper reports the results of the characterization of red soils in relation to the sorption of H2S from coal gas at 500 degrees C by spectroscopic techniques in order to provide more information on red soils' structural change both before and after reaction. In addition, by-products analysis has also been studied using Fourier transform infrared (FTIR) spectroscopy. Before and after the experiments the red soils were characterized with X-ray powder diffraction (XRPD), energy dispersion spectrum (EDS), X-ray photoelectron spectroscopy (XPS) and FTIR spectroscopy. XRPD results indicate that iron oxide species disappear from the original to reacted red soil. EDS analysis shows that a significant amount of sulfur is present in the reacted red soil, which is in agreement with the results of the elemental analysis and the calculated value based on breakthrough curve. XPS regression fitting results further indicate that sulfur retention may be associated with the iron oxides. S 2p XPS fittings point out that the major sulfur species present in the reacted red soil are composed of S(-2), elemental sulfur, polysulfide, sulfite and sulfate. Additionally, the binding energy of iron shifts to a lower position for the reacted red soil, which indicates that iron oxides in the original red soil have been converted into iron sulfide. Appreciable amounts of the by-products CO2, SO2 and COS are detected by on-line FTIR spectroscopy during the initial and later stages of the sorption process. The formation of CO2 is related to the water-shift reaction, and SO2 is probably attributable to the reaction of organic matters and H2S. The concentration of COS is quantified by GC/FPD and found it to be about 350 ppm, which is close to the equilibrium concentration of the reaction of inlet CO and H2S at a temperature of 500 degrees C.     

Monodisperse MFe2O4 (M = Fe, Co, Mn) nanoparticles

High-temperature solution phase reaction of iron(III) acetylacetonate, Fe(acac)(3), with 1,2-hexadecanediol in the presence of oleic acid and oleylamine leads to monodisperse magnetite (Fe(3)O(4)) nanoparticles. Similarly, reaction of Fe(acac)(3) and Co(acac)(2) or Mn(acac)(2) with the same diol results in monodisperse CoFe(2)O(4) or MnFe(2)O(4) nanoparticles. Particle diameter can be tuned from 3 to 20 nm by varying reaction conditions or by seed-mediated growth. The as-synthesized iron oxide nanoparticles have a cubic spinel structure as characterized by HRTEM, SAED, and XRD. Further, Fe(3)O(4) can be oxidized to Fe(2)O(3), as evidenced by XRD, NEXAFS spectroscopy, and SQUID magnetometry. The hydrophobic nanoparticles can be transformed into hydrophilic ones by adding bipolar surfactants, and aqueous nanoparticle dispersion is readily made. These iron oxide nanoparticles and their dispersions in various media have great potential in magnetic nanodevice and biomagnetic applications.     

Synthesis of arsenic sorbent by the reaction of magnesium hydroxide with aqueous iron(III) chloride solution

The reaction of magnesium hydroxide with a concentrated aqueous solution of iron(III) chloride yields a mixture of magnesium–iron layered double hydroxide and iron oxide–hydroxide in the akaganeite form. The content of these phases depends on the Mg/Fe atomic ratio in the starting reactant mixture. Iron oxide–hydroxide is the major reaction product at the Mg/Fe atomic ratio in the interval 1.5–1.75, and layered magnesium–iron layered double hydroxide, at Mg/Fe = 3–4. The ability of the synthesized products to take up As(III) from aqueous solutions was studied. These sorbents allow the arsenic concentration to be decreased from 3–5 mg L^–1 to values below MPC (0.01 mg L^–1).     

Electrochemistry and electrochromic properties of phenanthroline-iron(II/III) complex films

New films of the iron complexes with bis((2-hydroxyphenyl)methylaminosulfonyl)bathophenanthroline(HPBP) and bis((2-aminophenyl)methylaminosulfonyl)bathophenanthroline(APBP) ligands are prepared on the electrode surfaces by electrochemical polymerization. The resulting film-coated electrode shows a well-defined reversible voltammogram corresponding to the redox reaction of the Fe(II/III) complexes and an electrochromic change from red(absorption maximum: 540 nm) to colorless. The response rate of the color change to a potential step was found to be correlated to the apparent diffusion coefficient(Dapp) for the homogeneous charge-transport process within the film. The Dapp values estimated are (3-4) × 10⁻⁹cm²s⁻¹ for the [Fe(APBP)₃] film and(1-2) × 10⁻⁸cm²s⁻² for the [Fe(HPBP)₃] film, respectively, by potential-step chronoamperometric and chronocoulometric methods. The result of electrochemical quartz crystal microbalance(EQCM) measurements⁴) and dependence of the formal potential of the metal complex of the Fe(II/III) redox couple with activity of the supporting electrolyte anion in NaClO₄ aqueous solution showed that anion, cation, and solvent move simultaneously across the polymer film/solution interface during the redox reaction. A piezoelectric admittance measurement⁴⁾ of the poly[Fe(APBP)₃] coated quartz crystal electrode showed that the viscosity of the film is affected by the oxidation state of iron.     

Evolution of an iron passive film in a borate buffer solution (pH 8.4)

The evolution under open-circuit conditions of iron passive films formed at 0.8 V_SCE in a borate buffer solution at pH 8.4 was investigated with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry. The composition of the freshly formed passive film as determined by X-ray photoelectron spectroscopy (XPS) was found to be in agreement with a bilayer model, where the inner layer is composed mainly of iron oxide and the outer layer consists of a hydrated material. Results of XPS measurements also showed that the open-circuit breakdown of passive films was consistent with a reductive dissolution mechanism. When the iron electrode reached an intermediate stage in the open-circuit potential decay (approximately −0.3 V_SCE), the oxide film, containing both Fe(II) and Fe(III), was still protective. The impedance response in this stage exhibited a mixed control by charge transfer at the metal/film and film/solution interfaces and diffusion of point defects through the film. At the final stage of the open-circuit potential decay (approximately −0.7 V_SCE), the oxide film was very thin, and the ratio of Fe³⁺/Fe²⁺ and O²⁻/OH⁻ had decreased significantly. The impedance response also exhibited a mixed charge-transfer–diffusion control, but the diffusion process was related to transport of species in the electrolyte solution resulting from dissolution of the oxide film.     

Catalytic performance of iron oxide loaded on electron-rich surfaces of carbon nitride

Carbon nitride(CN) in CN encapsulated Ni/Al_2O_3(denoted as CN/Ni/Al_2O_3) catalyst was evidenced previously as a material in electron-rich state and possessed H2-dissociative adsorption activity due to the electron doping effect from underlying nickel. In this report, iron oxide loaded on the CN/Ni/Al_2O_3 was synthesized and investigated by Fischer-Tropsch(F-T) synthesis to test the special effect of electron-rich support on the catalytic activity of iron oxide. The Fe/CN/Al_2O_3 and CN/Ni/Al_2O_3 samples were accordingly synthesized for comparison. In Fe/CN/Ni/Al_2O_3, the iron oxide was reduced to magnetite by syngas as evidenced by the in-situ XPS measurements and XRD pattern of used catalyst. Compared with Fe/CN/Al_2O_3, more light hydrocarbons over Fe/CN/Ni/Al_2O_3 were observed. It should be understood by the interaction between iron oxide and support mainly due to the effect of electron-rich state and thus enhanced H_2 adsorption ability. In addition, such a novel support facilitated the CO conversion and retarded the water-gas shift reaction and CO2 formation. The new type of adjustment on electronic state should be useful for novel catalyst design.     

New approaches to reprocessing of oxide nuclear fuel

Dissolution of UO₂, U₃O₈, and solid solutions of actinides in UO₂ in subacid aqueous solutions (pH 0.9–1.4) of Fe(III) nitrate was studied. Complete dissolution of the oxides is attained at a molar ratio of ferric nitrate to uranium of 1.6. During this process actinides pass into the solution in the form of U(VI), Np(V), Pu(III), and Am(III). In the solutions obtained U(VI) is stable both at room temperature and at elevated temperatures (60 °C), and at high U concentrations (up to 300 mg mL^?1). Behavior of fission products corresponding to spent nuclear fuel of a WWER-1000 reactor in the process of dissolution the simulated spent nuclear fuel in ferric nitrate solutions was studied. Cs, Sr, Ba, Y, La, and Ce together with U pass quantitatively from the fuel into the solution, whereas Mo, Tc, and Ru remain in the resulting insoluble precipitate of basic Fe salt and do not pass into the solution. Nd, Zr, and Pd pass into the solution by approximately 50 %. The recovery of U or jointly U + Pu from the dissolution solution of the oxide nuclear fuel is performed by precipitation of their peroxides, which allows efficient separation of actinides from residues of fission products and iron.     

Toluene and naphthalene sorption by iron oxide/clay composites

Commercial bentonite (BFN) and organoclay (WS35), as well as iron oxide/clay composite (Mag_BFN) and iron/oxide organoclay composite (Mag_S35) were prepared for toluene and naphthalene sorption. Mag_BFN and Mag_S35 were obtained, respectively, by the precipitation of iron oxide hydrates onto sodium BFN and S35 clay particles. The materials were characterized by powder X-ray diffraction (XRD), X-ray Fluorescence (XRF), and TG and DTA. From XRF results and TG data on calcined mass basis, a quantitative method was developed to estimate the iron compound contents of the composites, as well as the organic matter content present in WS35 and Mag_S35.     

Dissolution of Nickel Ferrite in Aqueous Solutions Containing Oxalic Acid and Ferrous Salts

The dissolution of nickel ferrite in oxalic acid and in ferrous oxalate-oxalic acid aqueous solution was studied. Nickel ferrite was synthesized by thermal decomposition of a mixed tartrate; the particles were shown to be coated with a thin ferric oxide layer. Dissolution takes place in two stages, the first one corresponding to the dissolution of the ferric oxide outer layer and the second one being the dissolution of Ni(1.06)Fe(1.96)O(4). The kinetics of dissolution during this first stage is typical of ferric oxides: in oxalic acid, both a ligand-assisted and a redox mechanism operates, whereas in the presence of ferrous ions, redox catalysis leads to a faster dissolution. The rate dependence on both oxalic acid and on ferrous ion is described by the Langmuir-Hinshelwood equation; the best fitting corresponds to K(1)(ads)=25.6 mol(-1) dm(-3) and k(1)(max)=9.17x10(-7) mol m(-2) s(-1) and K(2)(ads)=37.1x10(3) mol(-1) dm(-3) and k(2)(max)=62.3x10(-7) mol m(-2) s(-1), respectively. In the second stage, Langmuir-Hinshelwood kinetics also describes the dissolution of iron and nickel from nickel ferrite, with K(1)(ads)=20.8 mol(-1) dm(3) and K(2)(ads)=1.16x10(5) mol(-1) dm(3). For iron, k(1)(max)=1.02x10(-7) mol of Fe m(-2) s(-1) and k(2)(max)=2.38x10(-7) mol of Fe m(-2) s(-1); for nickel, the rate constants k(1)(max) and k(2)(max) are 2.4 and 1.79 times smaller, respectively. The factor 1.79 agrees nicely with the stoichiometric ratio, whereas the factor 2.4 implies the accumulation of some nickel in the residual particles. The rate of nickel dissolution in oxalic acid is higher than that in bunsenite by a factor of 8, whereas hematite is more reactive by a factor of 9 (in the absence of Fe(II)) and 27 (in the presence of Fe (II)). It may be concluded that oxalic acid operates to dissolve iron, and the ensuing disruption of the solid framework accelerates the release of nickel. Copyright 2000 Academic Press.     

Synthesis of Pt and Pt-Fe nanoparticles supported on MWCNTs used as electrocatalysts in the methanol oxidation reaction

This work reports a feasible synthesis of highly-dispersed Pt and Pt-Fe nanoparticles supported on multiwall carbon nanotubes （MWCNTs） without Fe and multiwall carbon nanotubes with iron （MWCNTs-Fe） which applied as electrocatalysts for methanol electrooxidation. A Pt coordination complex salt was synthesized in an aqueous solution and it was used as precursor to prepare Pt/MWCNTs, Pt/MWCNTs-Fe, and Pt-Fe/MWCNTs using FeC12.4H20 as iron source which were named S 1, S2 and S3, respectively. The coordination complex of platinum （TOA）2PtC16 was obtained by the chemical reaction between （NH4）2PtC16 with tetraoctylammonium bromide （TOAB） and it was characterized by FT-IR and TGA. The materials were characterized by Raman spectroscopy, SEM, EDS, XRD, TEM and TGA. The electrocatalytic activity of Pt-based supported on MWCNTs in the methanol oxidation was investigated by cyclic voltammetry （CV） and chronoamperometry （CA）. Pt-Fe/MWCNTs electrocatalysts showed the highest electrocatalytic activity and stability among the tested electrocatalysts due to that the addition of ＂Fe＂ promotes the OH species adsorption on the electrocatalyst surface at low potentials, thus, enhancing the activity toward the methanol oxidation reaction （MOR）.     

Octahedral non-heme non-oxo Fe(IV) species stabilized by a redox-innocent N-methylated cyclam-acetate ligand

The ligand 1,4,8-tri-N-methyl-1,4,8,11-tetraazacyclotetradecane-11-acetic acid (Me3cyclam-acetic acid) has been synthesized by Eschweiler-Clarke methylation of cyclam-acetic acid, and the iron(III) complex [(Me3cyclam-acetate)FeN3]PF6, 1, has been synthesized, which has been found to have significantly different properties than its unmethylated analogue, [(cyclam-acetate)FeN3]PF6, 2. Whereas the iron ion in 2 is low spin with S = 1/2, 1 is found to be high spin at temperatures above 100 K, though low-spin species are observed at lower temperatures, indicating a spin crossover phenomenon. The iron(II) species 1red is electrochemically more accessible than 2red since the Fe2+/3+ redox wave in 1 appears approximately 350 mV more positive than the corresponding wave in 2. Also, 1 displays a reversible Fe3+/4+ redox wave, which is irreversible in 2, denoting that the Fe(IV) species 1ox is kinetically stable. 1red and 1ox have been generated electrochemically in solution and studied spectroscopically. M?ssbauer spectroscopy has confirmed that, in both reduction and oxidation, iron is the redox center, that 1red is high spin (S = 2), and that 1ox is low spin (S = 1), in contrast to 2red which is low spin and 2ox which could not be isolated.