Synthesis and characterization of a new pyrrolidine containing sulfur ligand and the transition metal complexes of Co(II), Ni(II) and Cu(I)

Potassium 1,3-dipyrrolidinopropan-2-O-xanthate (LK), and its complexes with Co(II), Ni(II) and Cu(I) have been prepared and characterized as [CoL₂(H₂O)₂]?·?2H₂O, [NiL₂(H₂O)₂] and CuL?·?2H₂O by FT-IR, ¹H and ¹³C NMR spectroscopies, elemental analyses, magnetic susceptibility and TGA techniques.     

Synthesis and characterization of potassium 1,3-bis(N-methylpiperazino)propan-2-O-xanthate and the complexes of Co(II), Ni(II) and Cu(I) ions

Potassium 1,3-bis(N-methyl piperazino)propan-2-O-xanthate (LK), and its complexes with Co(II), Ni(II) and Cu(I) ions have been prepared and characterized as [CoL₂(H₂O)₂], [NiL₂(H₂O)₂]·2H₂O and CuL·2H₂O by FT-IR, ¹H and ¹³C?NMR spectroscopies, elemental analyses, magnetic susceptibility and TGA techniques.     

Simultaneous kinetic spectrophotometric determination of Cu(II), Co(II) and Ni(II) using partial least squares (PLS) regression

A partial least squares (PLS-1) calibration model based on kinetic—spectrophotometric measurement, for the simultaneous determination of Cu(II), Ni(II) and Co(II) ions is described. The method was based on the difference in the rate of the reaction between Co(II), Ni(II) and Cu(II) ions with 1-(2-pyridylazo)2-naphthol in a pH 5.8 buffer solution and in micellar media at 25°C. The absorption kinetic profiles of the solutions were monitored by measuring the absorbance at 570 nm at 2 s intervals during the time range of 0–10 min after initiation of the reaction. The experimental calibration matrix for the partial least squares (PLS-1) model was designed with 30 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 0.1-2 μg mL⁻¹ for each cation. The proposed method was successfully applied to the simultaneous determination of Cu(II), Ni(II) and Co(II) ions in water and in synthetic alloy samples.      

Bioactive Co(II), Ni(II), and Cu(II) Complexes Containing a Tridentate Sulfathiazole-Based (ONN) Schiff Base

New Co(II), Ni(II), and Cu(II) complexes were synthesized with the Schiff base ligand obtained by the condensation of sulfathiazole with salicylaldehyde. Their characterization was performed by elemental analysis, molar conductance, spectroscopic techniques (IR, diffuse reflectance and UV–Vis–NIR), magnetic moments, thermal analysis, and calorimetry (thermogravimetry/derivative thermogravimetry/differential scanning calorimetry), while their morphological and crystal systems were explained on the basis of powder X-ray diffraction results. The IR data indicated that the Schiff base ligand is tridentate coordinated to the metallic ion with two N atoms from azomethine group and thiazole ring and one O atom from phenolic group. The composition of the complexes was found to be of the [ML₂]∙nH₂O (M = Co, n = 1.5 (1); M = Ni, n = 1 (2); M = Cu, n = 4.5 (3)) type, having an octahedral geometry for the Co(II) and Ni(II) complexes and a tetragonally distorted octahedral geometry for the Cu(II) complex. The presence of lattice water molecules was confirmed by thermal analysis. XRD analysis evidenced the polycrystalline nature of the powders, with a monoclinic structure. The unit cell volume of the complexes was found to increase in the order of (2) < (1) < (3). SEM evidenced hard agglomerates with micrometric-range sizes for all the investigated samples (ligand and complexes). EDS analysis showed that the N:S and N:M atomic ratios were close to the theoretical ones (1.5 and 6.0, respectively). The geometric and electronic structures of the Schiff base ligand 4-((2-hydroxybenzylidene) amino)-N-(thiazol-2-yl) benzenesulfonamide (HL) was computationally investigated by the density functional theory (DFT) method. The predictive molecular properties of the chemical reactivity of the HL and Cu(II) complex were determined by a DFT calculation. The Schiff base and its metal complexes were tested against some bacterial strains (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Bacillus subtilis). The results indicated that the antibacterial activity of all metal complexes is better than that of the Schiff base.     

Co(II), Ni(II), Cu(II) and Zn(II) complexes of aminothiazole‐derived Schiff base ligands: Synthesis,characterization, antibacterial and cytotoxicity evaluation,bovine serum albumin binding and density functional theory studies

Transition metal complexes of type M(L)₂(H₂O)_x were synthesized, where L is deprotonated Schiff base 2,4‐dihalo‐6‐(substituted thiazol‐2‐ylimino)methylphenol derived from the condensation of aminothiazole or its derivatives with 2‐hydroxy‐3‐halobenzaldehyde and M = Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ (x = 0 for Cu²⁺ and Zn²⁺; x = 2 for Co²⁺ and Ni²⁺). The synthesized Schiff bases and their metal complexes were thoroughly characterized using infrared, ¹H NMR, electronic and electron paramagnetic resonance spectroscopies, elemental analysis, molar conductance and magnetic susceptibility measurements, thermogravimetric analysis and scanning electron microscopy. The results reveal that the bidentate ligands form complexes having octahedral geometry around Co²⁺ and Ni²⁺ metal ions while the geometry around Cu²⁺ and Zn²⁺ metal ions is four‐coordinated. The geometries of newly synthesized Schiff bases and their metal complexes were fully optimized in Gaussian 09 using 6–31 + g(d,p) basis set. Fluorescence quenching data reveal that Zn(II) and Cu(II) complexes bind more strongly to bovine serum albumin in comparison to Co(II) and Ni(II) complexes. The ligands and their complexes were evaluated for in vitro antibacterial activity against Escherichia coli ATCC 25922 (Gram negative) and Staphylococcus aureus ATCC 29213 (Gram positive) and cytotoxicity against lever hepatocellular cell line HepG2.     

Synthesis and characterization of Cu(II), Co(II) and Ni(II) coordination polymers containing bis(imidazolyl) ligands

Two structurally related flexible imidazolyl ligands, bis(N-imidazolyl)methane (L₁) and 1,4-bis(N-imidazolyl)butane (L₂), were reacted with Cu(II), Co(II) and Ni(II) salts of aliphatic/aromatic dicarboxylic acids resulting in the formation of a number of novel metal–organic coordination architectures, [CuB₂(ox)₂(L₁)₂(H₂O)₂] · 4H₂O (1) (ox = oxalate), [Cu(pdc)(L₂)_1.5] · 4H₂O (2, pdc = pyridine-2,6-dicarboxylate), [Co(L)₂(H₂O)₂](tp) · 4H₂O (3, tp = terephthalate), [Ni(L₁)₂(H₂O)₂](ip) · 5H₂O (4, ip = isophthalate), [Cu₂(L₁)₄(H₂O)₄](tp)₂ · 7H₂O (5), [Co(mal)(L₁)(H₂O)] · 0.5MeOH (6, mal = malonate), [Co(pdc)(L₁)(H₂O)] (7). All the complexes have been structurally characterized by X-ray diffraction analysis. The different coordination modes of the dicarboxylate anions, due to their chain length, rigidity and diimidazolyl functionality, lead to a wide range of different coordination structures. The coordination polymers exhibit 1D single chain, ladder, 2D sheet and 2D network structures. The aliphatic and aromatic dicarboxylates can adopt chelating μ₂ and chelating-bridging μ₃ coordination modes, or act as uncoordinated counter anions. The central metal ions are coordinated in N₂O₄, N₄O₂, N₂O₃ and N₃O₃ fashions, depending on the ancillary ligands. The topology of 1 gives rise to macrocycles which are connected through hydrogen bonds to form 1D chains, whereas compound 2 exhibits a 1D polymeric ladder in which the carboxylate acts as a pincer ligand. Compounds 3–5 show doubly bridged 1D chains, and the dicarboxylate groups are not coordinated but form 2D corrugated sheets with water molecules intercalated between the cationic layers. Compound 6 has a 2D network sheet structure in which each metal ion links three neighboring Co atoms by the bis(N-imidazolyl)methane ligand. The cobalt compound 7, with a 2D polymeric double sheet structure, is built from pincer carboxylate (pdc) and 1,4-bis(N-imidazolyl)methane ligands.     

Coordination compounds of Co(II), Ni(II) and Cu(II) with capric acid hydrazide

The reaction of aquo-ethanolic solutions of Co(II), Ni(II) and Cu(II) salts and ethanolic solution of capric acid hydrazide (L) yielded paramagnetic, high-spin bis- and tris(ligand) chelate complexes. The tris(ligand) complexes, [ML ₃]X ₂·nH₂O [M=Co(II), Ni(II);X=NO ₃ ^– , ClO ₄ ^– , 1/2SO ₄ ^2– ], have an octahedral structure formed on account of the bidentate (NO) coordination of three neutral hydrazide molecules. In the bis(ligand) complexes,ML ₂(NCS)₂ [M=Co(II), Ni(II)] and CuL ₂ X ₂·nH₂O (X=NO ₃ ^– , ClO ₄ ^– and 1/2SO ₄ ^2– ), the oxoanions and NCS^– take also part in coordination. The complexes have been characterized by elemental analysis, IR spectra, magnetic measurements, molar conductivity and TG analysis.

---

Caprinsäurehydrazid-Komplexe von Co(II), Ni(II) und Cu(II)

Zusammenfassung Durch die Reaktion von wäßrig-ethanolischen Lösungen von Co(II)-, Ni(II)-und Cu(II)-Salzen mit einer ethanolischen Lösung von Caprinsäurehydrazid (L) wurden paramagnetische high-spin Bis- und Tris-Ligand-Chelatkomplexe erhalten. Tris-Ligand-Komplexe des Typs [ML ₃ X ₂·nH₂O [M=Co(II), Ni(II);X=NO ₃ ^– , ClO ₄ ^– , 1/2SO ₄ ^2– ], die eine oktaedrische Struktur besitzen, entstehen durch die Koordination von drei neutralen zweizähnigen (NO)-Hydrazidmolekülen. Bei den Bis-Ligand-KomplexenML ₂(NCS)₂ [M=Co(II), Ni(II)], sowie bei den Bis-Ligand-Komplexen CuL ₂ X ₂·nH₂O (X=NO ₃ ^– , ClO ₄ ^– , 1/2SO ₄ ^2– ) nehmen bei der Koordination außer Hydrazid auch die Säurereste teil. Die Komplexe wurden durch Elementaranalyse, IR-Spektren, magnetische Messungen, molare Leitfähigkeit und TG-Analysen charakterisiert.

     

Thermal, spectral and magnetic characterization of Co(II), Ni(II) AND Cu(II) 4-chloro-2-nitrobenzoates

Physico-chemical properties of 4-chloro-2-nitrobenzoates of Co(II), Ni(II), and Cu(II) were studied. The complexes were obtained as mono- and trihydrates with a metal ion to ligand ratio of 1:2. All analysed 4-chloro-2-nitrobenzoates are polycrystalline compounds with colours depending on the central ions: pink for Co(II), green for Ni(II), and blue for Cu(II) complexes. Their thermal decomposition was studied only in the range of 293–523 K, because it was found that on heating in air above 523 K 4-chloro-2-nitrobenzoates decompose explosively. Hydrated complexes lose crystallization water molecules in one step and anhydrous compounds are formed. The final products of their decomposition are the oxides of the respective transition metals. From the results it appears that during dehydration process no transformation of nitro group to nitrite takes place. The solubilities of analysed complexes in water at 293 K are of the order of 10^–4–10^–2 mol dm^–3. The magnetic moment values of Co²⁺, Ni²⁺ and Cu²⁺ ions in 4-chloro-2-nitrobenzoates experimentally determined at 76–303 K change from 3.89 to 4.82 μ_B for Co(II) complex, from 2.25 to 2.98 μ_B for Ni(II) 4-chloro-2-nitrobenzoate, and from 0.27 to 1.44 μ_B for Cu(II) complex. 4-chloro-2-nitrobenzoates of Co(II), and Ni(II) follow the Curie–Weiss law. Complex of Cu(II) forms dimer.     

Poly(propylene imine) dendrimer complexes of Cu(II), Zn(II), and Co(III) as catalysts of hydrolysis of p-nitrophenyl diphenyl phosphate

Poly(propylene imine) dendrimers having 8, 32, and 64 primary amine end groups form diamino Cu(II), diamino Zn(II), and tetramino Co(III) complexes that are identified spectrophotometrically and titrimetrically. The dendrimer–metal ion complexes catalyze the hydrolysis of p-nitrophenyl diphenyl phosphate in zwitterionic buffer solutions at pH ≤ 8.1 with relative activities Cu(II) > Zn(II) > Co(III). The rates of hydrolysis are faster with sodium perchlorate than with sodium chloride to control ionic strength. In sodium perchlorate solutions with Cu(II) the rates increase with increasing size of the dendrimer. In sodium chloride solutions with Cu(II) the rates decrease with increasing size of the dendrimer. Rate constants in buffered sodium chloride solutions of dendrimers and 1.0mM Cu(II) are 1.3–6.3 times faster than in the absence of Cu(II). The fastest hydrolyses occurred at a dendrimer primary amine to Cu(II) ratio NH₂/Cu ≤ 2. At NH₂/Cu = 4 and with the 1,4,7,10-tetraazacyclodecane complex of Cu(II) hydrolysis rates were much slower. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2727–2736, 1999     

Synthesis and structural studies of Co(II), Ni(II) and Cd(II) complexes with 2-acetylpyridine

Three new mononuclear complexes [Co(2-Acpy)₂(H₂O)₂](NO₃)₂ (1), [Ni(2-Acpy)₂(H₂O)₂](NO₃)₂ (2) and [Cd(2-Acpy)₂(NO₃)₂] (3) (2-Acpy = 2-acetylpyridine) have been synthesized and characterized by elemental analysis, IR and UV–Vis spectroscopy. The structures of 1 and 3 were accomplished by single crystal X-ray diffraction. Crystallographic investigation of 1 reveals monomeric, dicationic units in which the cobalt(II) ion is six-coordinate. The coordination sphere is formed by two N, O bidentate acetylpyridine ligands and two water molecules. The crystal structure of 3 consists of monomeric units in which the cadmium is eight-coordinate. Both the organic ligand and nitrate groups are bidentate chelators. The supramolecular solid-state architecture is sustained by π–π interactions.     

Synthesis and characterization of Co(II), Ni(II), Zn(II) and Cu(II) complexes with a new tetraazamacrocyclic Schiff base ligand containing a piperazine moiety: X-ray crystal structure determination of the Co(II) complex

Two macrocyclic Schiff base ligands, L¹ [1+1] and L² [2+2], have been obtained in a one-pot cyclocondensation of 1,4-bis(2-formylphenyl)piperazine and 1,3-diaminopropane. Unfortunately, because of the low solubility of both ligands, their separation was unsuccessful. In the direct reaction of these mixed ligands (L¹ and L²) and the appropriate metal ions only [CoL¹(NO₃)]ClO₄, [NiL¹](ClO₄)₂, [CuL¹](ClO₄)₂ and [ZnL¹(NO₃)]ClO₄ complexes have been isolated. All the complexes were characterized by elemental analyses, IR, FAB-MS, conductivity measurements and in the case of the [ZnL¹(NO₃)]ClO₄ complex with NMR spectroscopy.     

Thermal, spectral and magnetic behaviour of 2,3,4-trimethoxybenzoates of Mn(II), Co(II), Ni(II) AND Cu(II)

Four new complexes of 2,3,4-trimethoxybenzoic acid anion with manganese(II), cobalt(II), nickel(II) and copper(II) cations were synthesized, analysed and characterized by standard chemical and physical methods. 2,3,4-Trimethoxybenzoates of Mn(II), Co(II), Ni(II) and Cu(II) are polycrystalline compounds with colours typical for M(II) ions. The carboxylate group in the anhydrous complexes of Mn(II), Co(II) and Ni(II) is monodentate and in that of Cu(II) monohydrate is bidentate bridging one. The anhydrous complexes of Mn(II), Co(II) and Ni(II) heated in air to 1273 K are stable up to 505–517 K. Next in the range of 505–1205 K they decompose to the following oxides: Mn₃O₄, CoO, NiO. The complex of Cu(II) is stable up to 390 K, and next in the range of 390–443 K it loses one molecule of water. The final product of its decomposition is CuO. The solubility in water at 293 K is of the order of 10^–3 mol dm^–3 for the Mn(II) complex and 10^–4 mol dm^–3 for Co(II), Ni(II) and Cu(II) complexes. The magnetic moment values of Mn²⁺, Co²⁺, Ni²⁺ and Cu²⁺ ions in 2,3,4-trimethoxybenzoates experimentally determined in the range of 77–300 K change from 5.64–6.57 μB (for Mn²⁺), 4.73–5.17 μB (for Co²⁺), 3.26–3.35 μB (for Ni²⁺) and 0.27–1.42 μB (for Cu²⁺). 2,3,4-Trimethoxybenzoates of Mn(II), Co(II) and Ni(II) follow the Curie–Weiss law, whereas that of Cu(II) forms a dimer.     

Effect of pH on Competitive Adsorption of Cu(II), Ni(II), and Zn(II) from Water onto Chitosan Beads

The amounts of adsorption of Cu²⁺, Ni²⁺, and Zn²⁺ from single, binary, and tertiary nitrate solutions onto glutaraldehyde cross-linked chitosan beads were measured. The beads had an average particle size and pore volume of 2 mm and 0.06 cm³/g, respectively, and had a BET surface area of 60 m²/g. All experiments were performed at 298 K as a function of initial pH (2.0–5.0), total metal concentration (0.77–17.0 mol/m³), and molar concentration ratio (0.25–4) in the aqueous phase. It was shown that the amount of metal adsorption generally increased with increasing solution pH. Competitive adsorption was significant in binary and tertiary systems when Cu²⁺ was present. The selectivity factor reached maximum in an equilibrium pH range of 5.1–5.3 and 4.5–4.9 for the Cu-Ni and Cu-Zn binary systems, respectively. This adsorbent provided a possibility for selective separation of Cu²⁺ from such multi-component solutions.     

New Ni(II)Cu(II)Ni(II) trinuclear complexes with an 5=3/2 high-spin ground

Four new heterotrinuclear complexes have been synthesized and characterized, namely {[Ni(L)₂]₂[Cu(opba)]}(ClO₄)₂, where opba denotes o-phenylenebis(oxamato) and L stands for 1,10-phenanthroline(phen) (1), 5-nitro-l,10-phenanthroline(NO₂-phen) (2), 2,2′-bipyridyl(bpy) (S) and 4,4′-dimethyl-2,2′-bipyridyl(Me₂bpy) (4). The temperature dependence of the magnetic susceptibility of {[Ni(phen)₂]₂[Cu(opba)]}(ClO₄)₂3H₂O has been studied in the 4–300 K range, giving the exchange integral J—109 cm^?1. The HMT vs. T plot exhibits a minimum at about 100 K, characteristic of this kind of coupled polymetallic complex with an irregular spin-state structure.     

Complexes of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) with 4-chloro-2-methoxybenzoic acid anion

The complexes of 4-chloro-2-methoxybenzoic acid anion with Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ were obtained as polycrystalline solids with general formula M(C₈H₆ClO₃)₂·nH₂O and colours typical for M(II) ions (Mn – slightly pink, Co – pink, Ni – slightly green, Cu – turquoise and Zn – white). The results of elemental, thermal and spectral analyses suggest that compounds of Mn(II), Cu(II) and Zn(II) are tetrahydrates whereas those of Co(II) and Ni(II) are pentahydrates. The carboxylate groups in these complexes are monodentate. The hydrates of 4-chloro-2-methoxybenzoates of Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) heated in air to 1273 K are dehydrated in one step in the range of 323–411 K and form anhydrous salts which next in the range of 433–1212 K are decomposed to the following oxides: Mn₃O₄, CoO, NiO and ZnO. The final products of decomposition of Cu(II) complex are CuO and Cu. The solubility value in water at 293 K for all complexes is in the order of 10^–3 mol dm^–3. The plots of χ_M vs. temperature of 4-chloro-2-methoxybenzoates of Mn(II), Co(II), Ni(II) and Cu(II) follow the Curie–Weiss law. The magnetic moment values of Mn²⁺, Co²⁺, Ni²⁺ and Cu²⁺ ions in these complexes were determined in the range of 76−303 K and they change from: 5.88–6.04 μ_B for Mn(C₈H₆ClO₃)₂·4H₂O, 3.96–4.75 μ_B for Co(C₈H₆ClO₃)₂·5H₂O, 2.32–3.02 μ_B for Ni(C₈H₆ClO₃)₂·5H₂O and 1.77–1.94 μ_B for Cu(C₈H₆ClO₃)₂·4H₂O.     

Hetero-binuclear chelates of Mn(II), Co(II) and Cu(II) o-cresolphthalein complexonates with other metal ions

Heterobinuclear metal chelates of Mn²⁺, Co²⁺ or Cu²⁺ and some transition metal ions with o-cresolphthalein complexone have been prepared and characterized. Elemental analyses are in agreement with proposed formulae. Thermal analyses (TGA and DTA) were used to determine the degradation products; some thermodynamic parameters were calculated. IR and UV-Vis spectra identified the mode of bonding between the metal ions and the ligand as well as its geometry. Magnetic moment determination and ESR spectra of the heterobinuclear complex revealed some antiferromagnetic interaction between the metal ions, which depends mainly on the two metal ions forming the chelate. Electrochemical studies of the complexes [DC-polarography and cyclic voltammetry (CV)] confirmed the existence and the nature of the metal ions in the chelate.     

Complexes of Co(II), Ni(II) and Cu(II) with lapachol

Complexes of naturally occurring hydroxynaphtho-quinone, lapachol (2-hydroxy-3(3-methyl-2-buthenyl)-1,4-naphthoquinone = HL) with Co(II), Ni(II) and Cu(II) have been prepared by reaction of the corresponding acetates with the ligand (HL) in ethanol. The molecular and crystal structures were determined for [CoL₂(EtOH)₂] (1), [NiL₂(EtOH)₂] (2), and [CuL₂(py)₂] (3). In all cases the deprotonated lapachol behaves as chelating bidentate ligand. The complexes were also characterized by elemental analyses, cyclic voltammetry, and FAB-MS.     

The synthesis and characterization of three new vic -dioximes and their nickel(II), copper(II) and cobalt(II) complexes

Three new vic-dioximes, [L¹H₂], N-(4-ethylphenyl)amino-1-acetyl-1-cyclohexenylglyoxime, [L²H₂], N-(4-butylphenyl)amino-1-acetyl-1-cyclohexenylglyoxime, and [L³H₂], N-(4-methoxyphenyl)amino-1-acetyl-1-cyclohexenylglyoxime were synthesized from 1-acetyl-1-cyclohexeneglyoxime and the corresponding substituted aromatic amines. Metal complexes of these ligands were also synthesized with Ni(II), Cu(II), and Co(II) salts. These new compounds (ligands and complexes) were characterized with FT–IR, magnetic susceptibility measurement, molar conductivity measurements, mass spectrometry measurements, thermal methods (e.g. thermal gravimetric analysis), ¹H NMR (Nuclear Magnetic Resonance) and ¹³C NMR spectral data and elemental analyses.     

Synthesis,spectroscopic, and thermal analyses of trinuclear Mn(II), Co(II), Ni(II), and Zn(II) complexes with some sulfa derivatives

New bi- and trihomonuclear Mn(II), Co(II), Ni(II), and Zn(II) complexes with sulfa-guanidine Schiff bases have been synthesized for potential chemotherapeutic use. The complexes are characterized using elemental and thermal (TGA) analyses, mass spectra (MS), molar conductance, IR, ¹H-NMR, UV-Vis, and electron spin resonance (ESR) spectra as well as magnetic moment measurements. The low molar conductance values denote non-electrolytes. The thermal behavior of these chelates shows that the hydrated complexes lose water of hydration in the first step followed by loss of coordinated water followed immediately by decomposition of the anions and ligands in subsequent steps. IR and ¹H-NMR data reveal that ligands are coordinated to the metal ions by two or three bidentate centers via the enol form of the carbonyl C=O group, enolic sulfonamide S(O)OH, and the nitrogen of azomethine. The UV-Vis and ESR spectra as well as magnetic moment data reveal that formation of octahedral [Mn₂L¹(AcO)₂(H₂O)₆] (1), [Co₂(L¹)₂(H₂O)₈] (2), [Ni₂L¹(AcO)₂(H₂O)₆] (3), [Mn₃L²(AcO)₃(H₂O)₉] (5), [Co₃L²(AcO)₃(H₂O)₉] · 4H₂O (6), [Ni₃L²(AcO)₃(H₂O)₉] · 7H₂O (7), [Mn₃L³(AcO)₃(H₂O)₆] (9), [Co₂(HL³)₂(H₂O)₈] · 4H₂O (10), [Ni₃L³(AcO)₃(H₂O)₉] (11), [Mn₃L⁴(AcO)₃(H₂O)₉] · H₂O (13), [Co₂(HL⁴)₂(H₂O)₈] · 5H₂O (14), and [Ni₃L⁴(AcO)₃(H₂O)₉] (15) while [Zn₂L¹(AcO)₂(H₂O)₂] (4), [Zn₃L²(AcO)₃(H₂O)₃] · 2H₂O (8), [Zn₃L³(AcO)₃(H₂O)₃] · 3H₂O (12), and [Zn₃L⁴(AcO)₃(H₂O)₃] · 2H₂O (16) are tetrahedral. The electron spray ionization (ESI) MS of the complexes showed isotope ion peaks of [M]⁺ and fragments supporting the formulation.     

Spectral and thermal studies of new Co(II) and Ni(II) hexaaza and octaaza macrocyclic complexes

The macrocyclic complexes of Co(II) and Ni(II) having chloride or thiocyanate ions in the axial position have been synthesized and characterized. These complexes are synthesised by the template condensation of o-phenylenediamine or 2,3-butanedionedihydrazone with the appropriate aldehydes in NH₄OH solution in the presence of the metal ions, Co(II) and Ni(II). The complexes were characterized by spectroscopic methods (IR, UV-Vis and ESR) and magnetic measurements as well as thermal analysis (TG and DTA). The results obtained are commensurate with the proposed formulae. Spectral studies indicate that these complexes have an octahedral structure. From conductivity measurements the complexes are non-electrolytes. The kinetic of the thermal decomposition of the complexes was studied and the thermodynamic parameters are reported.