EPR study of ordered Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-based aerogel

Samples of oriented aerogel based on aluminum oxide are studied by the electron paramagnetic resonance (EPR) technique under steady-state and pulse conditions. At least two types of paramagnetic centers interacting with Al nuclei on the surface of aerogel are revealed. Their spectra are characterized by the presence or absence of superhyperfine structure in the EPR spectra, respectively. The X-ray irradiation at room temperature gives rise to the formation of additional long-lived paramagnetic centers of the second kind. Their characteristic decay times for the “fast” and “slow” processes are determined. The interaction of induced paramagnetic centers with protons located on the surface of aerogel is revealed.     

X-ray diffraction and calorimetric studies of powder nanocrystalline systems based on ZrO<Subscript>2</Subscript>(Y) and Al<Subscript>2</Subscript>O<Subscript>3</Subscript> with second insoluble component

Four nanocrystalline ZrO₂(Y)- and Al₂O₃-based powders synthesized by plasma spray pyrolysis have been studied. It has been shown that the ZrO₂(3Y)-based system with second component Al₂O₃ forms a nonequilibrium solid solution ZrO₂(3Y, Al) with the tetragonal structure. It has been found that the existence of an component (ZrO₂(Y)) insoluble in the coarse-grained state in Al₂O₃-based systems causes the delay of the γ → α transformation and decreases the size of the coherently scattering domains of formed nanosized modifications of Al₂O₃.     

Metastable superconductivity of the Al/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> interface

Superconductivity in the interface region between metallic Al and its oxide, Al₂O₃, has been detected at about 45 K in the measured dynamic magnetic susceptibility.     

Properties of an Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Si interface

The phase chemical composition of an Al₂O₃/Si interface formed upon molecular deposition of a 100-nm-thick Al₂O₃ layer on the Si(100) (c-Si) surface is investigated by depth-resolved ultrasoft x-ray emission spectroscopy. Analysis is performed using Al and Si L_{2, 3} emission bands. It is found that the thickness of the interface separating the c-Si substrate and the Al₂O₃ layer is approximately equal to 60 nm and the interface has a complex structure. The upper layer of the interface contains Al₂O₃ molecules and Al atoms, whose coordination is characteristic of metallic aluminum (most likely, these atoms form sufficiently large-sized Al clusters). The shape of the Si bands indicates that the interface layer (no more than 10-nm thick) adjacent to the substrate involves Si atoms in an unusual chemical state. This state is not typical of amorphous Si, c-Si, SiO₂, or SiO_x (it is assumed that these Si atoms form small-sized Si clusters). It is revealed that SiO₂ is contained in the vicinity of the substrate. The properties of thicker coatings are similar to those of the 100-nm-thick Al₂O₃ layer and differ significantly from the properties of the interfaces of Al₂O₃ thin layers.     

Thermal hysteresis of a simulated Al<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Thermal hysteresis in a simulated Al₂O₃ system has been investigated using a Molecular Dynamics (MD) method. Simulations were done in the basic cube under periodic boundary conditions containing 3000 ions with Born-Mayer type pair potentials. The system was cooled down from 7000 K to 0 K and heated up from 0 K to 7000 K by the same cooling/heating rate of 1.7178×10¹⁴ K/s. The temperature dependence of the system density upon cooling and heating shows thermal hysteresis. The differences between structure and dynamics of the models obtained by cooling (MOBC) and heating (MOBH) at three different temperatures of 2100 K, 3500 K and 5600 K have been detected. Calculations show that the differences in the dynamics of the systems are more pronounced than those in the structure. Furthermore, dynamical heterogeneities in MOBC and MOBH at the temperature of 2100 K have been studied through a non-Gaussian parameter and comparison of partial radial distribution functions (PRDFs) for the 10% most mobile or immobile particles with their corresponding mean ones. Cluster size distributions of the 10% most mobile or immobile particles in MOBC and MOBH at the temperature of 2100 K have been obtained. Calculations show that differences in dynamical heterogeneities are pronounced.     

Phase composition and structure of nanocrystalline powders based on ZrO<Subscript>2</Subscript>(Y) and Al<Subscript>2</Subscript>O<Subscript>3</Subscript> obtained by plasma spray pyrolysis

It is shown that a nonequilibrium solid solution ZrO₂(3Y, Al) with tetragonal structure is formed in systems based on ZrO₂(3Y) with Al₂O₃ as a second component. A delay in the γ → α Al₂O₃ transformation and a reduction in the size of the coherently scattering domain of modifications are observed in systems based on Al₂O₃ with ZrO₂(Y) as a second component.     

Electronic excitations and defects in nanostructural Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

A time-resolved cathodo-and photoluminescence study of nanostructural modifications of Al₂O₃ (powders and ceramics) excited by heavy-current electron beams, as well as by pulsed synchrotron radiation, is reported. It was found that Al₂O₃ nanopowders probed before and after Fe⁺ ion irradiation have the same phase composition (the γ-phase/δ-phase ratio is equal to 1), an average grain size equal to ～17 nm, and practically the same set of broad cathodoluminescence (CL) bands peaking at 2.4, 3.2, and 3.8 eV. It was established that Al₂O₃ nanopowders exhibit fast photoluminescence (PL) (a band at 3.2 eV), whose decay kinetics is described by two exponential stages (τ₁ = 0.5 ns, τ₂ = 5.5 ns). Three bands, at 5.24, 6.13, and 7.44 eV, were isolated in the excitation spectrum of the fast PL. Two alternate models of PL centers were considered, according to which the 3.2-eV luminescence either originates from radiative relaxation of the P^? centers (anion-cation vacancy pairs) or is due to the formation of surface analogs of the F⁺ center (F _S ⁺ -type centers). In addition to the fast luminescence, nano-Al₂O₃ was found to produce slow luminescence in the form of a broad band peaking at 3.5 eV. The excitation spectrum of the 3.5-eV luminescence obtained at T = 13 K exhibits two doublet bands with maxima at 7.8 and 8.3 eV. An analysis of the luminescent properties of nanostructural and single-crystal Al₂O₃ suggests that the slow luminescence of nanopowders at 3.5 eV is due to radiative annihilation of excitons localized near structural defects.     

Al<Subscript>2</Subscript>O<Subscript>3</Subscript> plasma production during pulsed laser deposition

A Nd:YAG laser operating in second harmonic (532 nm), 3 ns pulse duration, 150 mJ pulse energy, and 10 Hz repetition rate, is employed to irradiate Al₂O₃ target placed in high vacuum. The produced plasma is investigated by an ion collector used in time-of-flight configuration and by a mass quadrupole spectrometer, in order to determine the equivalent plasma temperature and the atomic and molecular composition. Pulsed laser deposition technique has been used to produce thin films on different substrates placed close to the target. Different surface analyses, such as energy dispersive X-ray fluorescence (EDXRF), X-ray photoelectron spectroscopy (XPS) and surface profilometry are employed to characterize the produced films. Measurements of ablation yield, plasma equivalent temperature, acceleration voltage and characterization of grown thin films are presented and discussed.     

Effect of thermal annealing on the structure of ZnSe/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocomposite films

The ZnSe/Al₂O₃ nanocomposite films synthesized by laser evaporation followed by heat treatment are studied. X-ray diffraction and electron-microscopic investigations of the as-deposited films demonstrate the presence of ZnSe crystallites in an Al₂O₃ amorphous matrix. Annealing changes the structures of ZnSe and Al₂O₃, increases the ZnSe crystallite size, and causes the appearance of the ZnSeO₄ phase. The presence of aluminum oxide layers decreases the phase transformation temperature of zinc selenide.     

Synthesis and magnetic properties of FeNi<Subscript>3</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> core-shell nanocomposites

In this study, FeNi₃/Al₂O₃ core-shell nanocomposites, where individual FeNi₃ nanoparticles were coated with a thin layer of alumina, were fabricated by a modified sol-gel method. Several physical characterizations were performed on the samples of FeNi₃/Al₂O₃ nanocomposites with different thickness of Al₂O₃ shell. The encapsulation of FeNi₃ nanoparticles with alumina stops FeNi₃ agglomeration during heat treatment, and prevents interaction among the closely spaced magnetic FeNi₃ nanoparticles. The Al₂O₃ insulating shell improves the soft magnetic properties of FeNi₃. The study of the complex permeability of the samples shows that the real part μ’ of the permeability of the sample with Al molar content of 20% (Al/(Fe+Ni)) is as high as 12, and independent of frequency up to at least 1 GHz. The tunneling magnetoresistance arising from the presence of the Al₂O₃ shell have also been studied.     

Modification of the Al<Subscript>2</Subscript>O<Subscript>3</Subscript> surface by high-energy bismuth ions

This paper reports on an atomic-force microscopy study of the surface of α-Al₂O₃ single crystals irradiated by Bi ions with energies of 710, 557, 269, and 151 MeV. The shape of the radiation defects produced by single ions was established to depend on the ionization energy loss. The threshold ionization density above which the surface topography is observed to change lies in the 27–35 keV/nm interval. Possible mechanisms of defect formation in the thermal-spike model, namely, a phase transition and the creation of thermoelastic stresses in the high-energy ion track, are considered.     

Metallic liquid hydrogen and likely Al<Subscript>2</Subscript>O<Subscript>3</Subscript> metallic glass

Dynamic compression has been used to synthesize liquid metallic hydrogen at 140 GPa (1.4 million bar) and experimental data and theory predict Al₂O₃ might be a metallic glass at ∼ 300 GPa. The mechanism of metallization in both cases is probably a Mott-like transition. The strength of sapphire causes shock dissipation to be split differently in the strong solid and soft fluid. Once the 4.5-eV H-H and Al-O bonds are broken at sufficiently high pressures in liquid H₂ and in sapphire (single-crystal Al₂O₃), electrons are delocalized, which leads to formation of energy bands in fluid H and probably in amorphous Al₂O₃. The high strength of sapphire causes shock dissipation to be absorbed primarily in entropy up to ∼400 GPa, which also causes the 300-K isotherm and Hugoniot to be virtually coincident in this pressure range. Above ∼400 GPa shock dissipation must go primarily into temperature, which is observed experimentally as a rapid increase in shock pressure above ∼400 GPa. The metallization of glassy Al₂O₃, if verified, is expected to be general in strong oxide insulators. Implications for Super Earths are discussed.     

Revelation of the microstructure of oxide FeAl/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocomposite

The structural transformations at different stages of the preparation of oxide FeAl/Al₂O₃ nanocomposite by mechanosynthesis with the use of a preliminarily activated FeAl precursor are studied by means of transmission electron microscopy, X-ray diffraction and Mössbauer spectroscopy.     

Fabrication of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Al structure by nitric acid oxidation at room temperature

A thick Al₂O₃/aluminum (Al) structure has been fabricated by oxidation of Al with 68wt% and 98wt% nitric acid (HNO₃) aqueous solutions at room temperature. Measurements of the Al₂O₃ thickness vs. the oxidation time show that reaction and diffusion are the rate-determining steps for oxidation with 68wt% and 98wt% HNO₃ solutions, respectively. Observation of transmission electron micrographs shows that the Al₂O₃ layer formed with 68wt% HNO₃ has a structure with cylindrically shaped pores vertically aligned from the Al₂O₃ surface to the Al₂O₃/Al interface. Due to the porous structure, diffusion of HNO₃ proceeds easily, resulting in the reaction-limited oxidation mechanism. In this case, the Al₂O₃/Al structure is considerably rough. The Al₂O₃ layer formed with 98wt% HNO₃ solutions, on the other hand, possesses a denser structure without pores, and the Al₂O₃/Al interface is much smoother, but the thickness of the Al₂O₃ layer formed on crystalline Al regions is much smaller than that on amorphous Al regions. Due to the relatively uniform Al₂O₃ thickness, the leakage current density flowing through the Al₂O₃ layer formed with 68wt% HNO₃ is lower than that formed with 98wt% HNO₃.     

Luminescence and electronic excitations in crystals K<Subscript>2</Subscript>Al<Subscript>2</Subscript>B<Subscript>2</Subscript>O<Subscript>7</Subscript> with defects

This paper reports on the results of the comprehensive study of the dynamics of electronic excitations in K₂Al₂B₂O₇ (KABO) crystals, obtained by low-temperature luminescence vacuum ultraviolet spectroscopy with nanosecond time resolution upon photoexcitation by synchrotron radiation. For the first time, the data have been obtained on the photoluminescence (PL) decay kinetics, PL spectra with time resolution, PL excitation spectra with time resolution, and reflection spectra at 7 K; the intrinsic nature of PL at 3.28 eV has been established; luminescence bands of defects have been separated in the visible and ultraviolet spectral regions; an intense long-wavelength PL band has been detected at 1.72 eV; channels of the formation and decay of electronic excitations in K₂Al₂B₂O₇ crystals have been discussed.     

Experimental study of antiferromagnetic resonance in noncollinear antiferromagnetic Mn<Subscript>3</Subscript>Al<Subscript>2</Subscript>Ge<Subscript>3</Subscript>O<Subscript>12</Subscript>

The structural and magnetic properties of the mesoporous systems based on silicon dioxide with a regular hexagonal arrangement of pores several microns in length and several nanometers in diameter, which are filled with iron compound nanofilaments in various chemical states, are studied in detail. The studies are performed using the following mutually complementary methods: transmission electron microscopy, SQUID magnetometry, electron spin resonance, Mössbauer spectroscopy, polarized neutron small-angle diffraction, and synchrotron radiation diffraction. It is shown that the iron nanoparticles in pores are mainly in the γ phase of Fe₂O₃ with a small addition of the α phase and atomic iron clusters. The effective magnetic field acting on a nanofilament from other nanofilaments is 11 mT and has a dipole nature, the ferromagnetic–paramagnetic transition temperature is in the range 76–94 K depending on the annealing temperature of the samples, and the temperature that corresponds to the change in the magnetic state of the iron oxide nanofilaments is T ≈ 50–60 K at H = 0 and T ≈ 80 K at H = 300 mT. It is also shown that the magnetization reversal of an array of nanofilaments is caused by the magnetostatic interaction between nanofilaments at the fields that are lower than the saturation field.     

Dependence of electronic structure on the grain size in Mn<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocrystals

. The dependence of electron structure on the grain size in Mn₂O₃ nanocrystals has been investigated using X-ray photoelectron spectroscopy. It is found that the electron structure is sensitively dependent on the average grain size. The experimental results indicate that the O–1s core-level spectra are hardly shifted with decreasing average grain size; however, for a sample with a small grain size (e.g. a 9-nm sample), the shoulder peak evidently appears on the higher-binding-energy side. The main peak width of the Mn–2p core-level spectra becomes wide for samples with decreasing average grain size. The remarkable aspect of the Mn–3s core-level spectra is that the peak is multiply split, with a complex peak structure. The exchange interaction of the 3s and 3d electrons in the Mn³⁺ ion can be used to explain this behavior. PACS 71.23.-k; 73.22.-f     

Optical transmission of ceramic shielding blocks made from Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

We have studied the transmission of bulk Al₂O₃ ceramic used as heat shields for the working chamber of a turbine. We have established that radiation scattered from such an object has a pronounced speckle structure, while the scattering indicatrix is the same as the indicatrix for an ideal scatterer. We show that existing highpower semiconductor laser sources make it possible to penetrate sufficiently deeply into such materials, and the small transmission coefficient is not the limiting factor for development of optical methods for inspecting the quality of ceramic shielding blocks. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 2, pp. 237–240, March–April, 2007.     

A study of the structure and properties of nanostructured ZrO<Subscript>2</Subscript>-Y<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composite powders

The correlation between temperature treatment conditions and the ratio of components in nanostructured fibrous powders with a composition of ZrO₂-Y₂O₃-Al₂O₃ and their porous crystal structure and physicochemical properties is studied. The dependences of the ratio between zirconia tetragonal and monoclynic phases on the treatment temperature and the alumina content are found to have a nonmonotonic character. The growth of zirconia crystallite size is suppressed by introduced nanocrystalline alumina in a temperature range of 600–1200°C, which is caused by the processes of ternary solid solution formation. The bulk and picnometric density values of materials are proportional to the temperature of heat treatment. The temperature dependence of the specific surface and the size of oxide grain particles has an inversely proportional character. With increasing alumina content in the powders, the specific surface increases, while the picnometric and bulk densities decrease.     

Investigation of luminescence spectra of the Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript> and Y<Subscript>3</Subscript>Al<Subscript>5</Subscript>O<Subscript>12</Subscript>:Ce single-crystal films

The luminescence spectra of single-crystal films and bulk crystals of yttrium-aluminum garnet Y₃Al₅O₁₂ and Ce³⁺-activated Y₃Al₅O₁₂ were investigated. It was shown that the room-temperature luminescence intensity of the Ce³⁺-free single-crystal Y₃Al₅O₁₂ film was considerably lower than that of the bulk crystals, while the luminescence intensity of the Ce³⁺ ions in the Y₃Al₅O₁₂:Ce films was considerably higher than that one for the corresponding bulk crystal.