Determination of medecamycin by adsorptive stripping voltammetry with an activated electrode

The adsorptive and electrochemical behaviors of medecamycin were investigated on a glassy carbon electrode (GCE) pretreated by anodic oxidation at +1.8 V for 5 min in 0.025 mol l^–1 NH₃-NH₄Cl (pH 8.6) solution. An adsorptive stripping voltammetric method for the determination of medecamycin at the pretreated glassy carbon electrode has been developed. Medecamycin was accumulated in NH₃-NH₄Cl buffer (pH 9.0) at a potential of –0.7 V (vs. saturated calomel electrode (SCE)) for a certain time, and then determined by second-order differential anodic stripping voltammetry. The second-order differential anodic stripping peak current at +0.72 V was proportional to the concentration of medecamycin in the range 2.0 g ml^–1 to 50.0 g ml^–1. The detection limit (three times the signal-to-noise) was 1.0 g ml^–1 and the relative standard deviation of the results was 3.28% for eight successive determinations of 10.0 g ml^–1 medecamycin. This method has been applied to the direct determination of medecamycin in commercial tablets and spiked urine samples with satisfactory results.     

Stripping voltammetric determination of trace amounts of mercury using a carbon paste electrode modified with 2-mercapto-4(3H)-quinazolinone

A carbon paste electrode modified with 2-mercapto-4(3H)-quinazolinone was used for the voltammetric determination of mercury(II). Mercury was preconcentrated onto the surface of the modified electrode only by the complexing effect of the modifier without application of potential (i.e. in open-circuit conditions). After exchange of the medium, the accumulated amount of mercury(II) was determined by differential pulse anodic stripping voltammetry. The response depended on the concentration of mercury in the bulk solution, preconcentration time, and other parameters. The detection limit was 0.1 g 1^–1 Hg(II) for a preconcentration time of 15 min. Preconcentration for suitable times yielded a linear calibration graph from 0.5 to 6000 g 1^–1 Hg(II). For multiple determinations (5 runs), the relative standard deviation was 5% for a concentration of 100 g 1^–1 Hg(II). The proposed procedure was used to determine trace mercury in plant and sewage sludge samples with good results.On leave from Hainan University, Hainan Peoples Republic of China     

Simultaneous determination of uric acid, xanthine and hypoxanthine with an electrochemically pretreated carbon paste electrode

A simple method is presented for the simultaneous differential pulse voltammetric determination of uric acid, xanthine and hypoxanthine. It is based on the improved current responses of the three analytes at carbon paste electrodes polarized in a dilute alkaline medium (0.002 mol/l NaOH, 0.1 mol/l NaClO₄) at 1.3 V vs. SCE for a short time. Compared with the methods reported in the literature, this procedure has a much wider linear range (2 to 3 orders of magnitude in concentration), lower detection limits (5 to 10 g l^–1) and less interference by ascorbic acid. The electrochemical responses were found to be dependent on the pre-anodization potential and the time imposed on the electrodes as well as on the alkalinity of the supporting electrolyte. The proposed procedure was used to determine uric acid, xanthine and hypoxanthine in human urine without any preliminary treatment.     

Study of the conditions for the determination of metamitron by differential pulse polarography

Summary The electrochemical behaviour of the herbicide 4-amino-3-methyl-6-phenyl-1,2,4 triazine-5(4H)-on (Metamitron) is studied in aqueous medium using voltammetric techniques, with the ionic strength adjusted to 0.1 mol/l in sodium perchlorate and using a Britton-Robinson buffer. Two reduction waves on the mercury drop electrode appear, at –0.49 V the first and the second folded at –0.95 V and –1.05 V. The system is identified as irreversible and fundamentally controlled by diffusion. Using differential pulse polarography the detection limit reached was 0.02 mg · l^–1 for the first wave with an error of less than 2%. Thus a method is proposed for the determination of Metamitron in soil, with a detection limit of up to 0.02 g/g.

---

Untersuchung der Bedingungen zur Metamitronbestimmung durch Differential-Puls-Polarographie

     

Preconcentration and determination of cadmium in water

Cadmium in water was preconcentrated by adsorption on activated carbon after complexation with potassium ethyl xanthate. The recovery was >90% in the concentration range 10 g l^–1 to 500 g l^–1 with an enrichment factor of 1000. The method was employed for the analysis of cadmium in spiked water samples, by NAA and AAS. The standard deviation and relative mean error was 0.062 and 0.015, respectively.     

Development of cysteine-modified screen-printed electrode for the chronopotentiometric stripping analysis of cadmium(II) in wastewater and soil extracts

Screen-printed carbon electrodes were fabricated with amino acid functionality by using in situ co-deposition of mercury and cysteine. The three-electrode configuration (graphite carbon working electrode, carbon counter electrode and silver/silver chloride reference electrode) incorporating a cysteine-modified working electrode exhibited good sensitivity towards cadmium(II). Several experimental variables affecting the sensor stripping response were characterised and optimised. These include cysteine and mercury concentrations, deposition time, deposition potential and stripping current. Surface analysis was also conducted using scanning electron microscopy (SEM) in order to characterize the electrode surface during cadmium analysis. The stripping chronopotentiometric response for cadmium(II) was linear in the concentration range 0.4–800 g L^–1 when a deposition time of 2 min was used. A detection limit of 0.4 g L^–1 was obtained using 0.025 M Tris–HCl buffer containing 0.1 M KCl (pH 7.4) as the supporting electrolyte. The analytical utility of the cysteine-modified sensor was demonstrated by applying it to cadmium analysis in various wastewater and soil samples collected from a contaminated site and extracted using acetic acid. The results obtained using the developed electrodes agreed satisfactorily with the values achieved using atomic absorption spectrometry and inductively coupled plasma mass spectrometry analysis. These results demonstrate the feasibility of using this type of sensor for cadmium analysis.     

Spectroscopic and voltammetric studies of Pefloxacin bound to calf thymus double-stranded DNA

Spectral and electrochemical studies have been carried out on the interaction of pefloxacin with calf thymus double-stranded dsDNA. The voltammetric behavior of pefloxacin was investigated at glassy carbon, carbon paste and dsDNA-modified carbon paste electrodes using cyclic voltammetry. Pefloxacin was oxidized, yielding one irreversible oxidation peak. The modification of the carbon paste surface with dsDNA allowed an accumulation process to take place for pefloxacin such that higher sensitivity was achieved compared with the bare surface. The response was characterized with respect to ionic strength, accumulation time, pefloxacin concentration, and other variables. The stripping differential pulse voltammetric response showed a linear calibration curve in the range 1.0×10^–7–1.0×10^–5 mol l^–1 with a detection limit of 5.0×10^–8 mol l^–1 at the dsDNA modified electrode. The method was applied to the direct determination of pefloxacin in diluted urine samples.     

Electrochemical studies and square-wave voltammetric determination of fenofibrate in pharmaceutical formulations

The electrochemical reduction of fenofibrate at a hanging mercury drop electrode (HMDE) was investigated by cyclic voltammetry, square-wave voltammetry, and chronoamperometry. Different buffer solutions were used over a wide pH range (3.0–10.0). The best definition of the analytical signals was found in borate buffer (pH 9.0)–tetrabutylammonium iodide mixture containing 12.5% (v/v) methanol at –1.2 V (versus Ag/AgCl). According to cyclic voltammetric studies, the reduction was irreversible and diffusion controlled. The diffusion coefficient was 2.38×10^–6 cm² s^–1 as determined by chronoamperometry. Under optimized conditions of square-wave voltammetry, a linear relationship was obtained between 0.146–4.96 g mL^–1 of fenofibrate with a limit of detection of 0.025 g mL^–1. Validation parameters such as sensitivity, accuracy, precision, and recovery were evaluated. The proposed method was applied to the determination of fenofibrate in pharmaceutical formulations. The results were compared with those obtained by a published high-performance liquid chromatography method. No difference was found statistically.     

On-line glucose monitoring by using microdialysis sampling and amperometric detection based on ‘wired’ glucose oxidase in carbon paste

In-vitro on-line glucose monitoring is described, based on microdialysis sampling and amperometric detection operated in a flow-injection system. Samples were injected into a two-electrode microcell containing an Ag/AgCl quasi-reference electrode and a glucose enzyme electrode as the working electrode, operated at + 0.15 Vvs. Ag/AgCl. The enzyme electrode is constructed by mixing the wired glucose oxidase into carbon paste. {Poly[1-vinylimidazole osmium(4,4-dimethylbipyridine)₂Cl)]}^+/2+ was used to wire the enzyme. The non-coated electrodes, cross-linked with poly(ethylene glycol) diglycidyl ether, responded linearly to glucose concentrations up to 60 mM, and were characterized by a sensitivity of 0.23 A mM^–1 cm^–2, when operated in flow injection mode and of 5.4 AmM ^–1 cm^–2 in steady-state conditions. This sensitivity of the resulting enzyme electrode was 50% lower than that of similarly prepared but non-cross-linked electrodes. However, the cross-linked electrodes showed superior operational and storage stabilities, which were further improved by coating the electrodes with a negatively charged Eastman AQ film. An in-house designed microdialysis probe, equipped with a polysulphone cylindrical dialysis membrane, yielded a relative recovery of 50–60% at a perfusion rate of 2.5 l/min^–1 in a well stirred glucose solution. The on-line set up effectively rejected common interferences such as ascorbic acid and 4-acetaminophen when present at their physiological concentrations.     

Determination of pentachlorophenol residues in wine and corks by solvent extraction methodology and specific gas chromatography detection

Summary A gas chromatographic methodology with selective detection is presented for the analysis in wines and corks of pentachlorophenol residues, which are suspected to be the most likely precursors of some off-flavours described in several wine samples. After derivatisation, pentachlorophenol acetate residues were monitored by electrolytic conductivity detection and/or mass spectrometric detection in the selective ion mode at m/z 264 and 266. Recoveries varied from 80 to 96% for wine samples fortified with 5 to 100 g l^–1 and from 83 to 91% for corks (fortified at 25 to 100 g kg^–1). The proposed methodology allowed for a determination limit of g l^–1 for wine and 10 g kg^–1 for corks.     

Polarographisches Verhalten der C2-Halogenkohlenwasserstoffe

Summary Investigations on the polarographic and voltammetric behaviour of organic halogen compounds were carried out in order to obtain information on the redox properties and how to develop determination and detection methods. In this second report the dp-polarographic behaviour of the halogen substituted C₂-compounds has been studied in different supporting electrolytes and in various solvents. The electrode processes are discussed and the possibilities for the polarographic determination of the C₂-halogen hydrocarbons. The detection limit is 0.25 g · ml^–1 and the linear current-concentration relationship is observed up to 25 g · ml^–1. A simple and rapid method is proposed for the dp-polarographic determination of 1,2-dibromoethane in gasoline; the relative standard deviation for 20 g · ml^–1 is ±1.8%.     

Estimation of inorganic phosphate in aqueous solutions of DNA: A modification of the Berenblum-Chain method

Some modifications of the stannous chloride reduction method for the estimation of inorganic phosphate reported by Berenblum-Chain are suggested. By this method, it is possible to measure 25 g l^–1 of phosphorus /P/ as inorganic phosphate in the presence of macromolecules like deoxyribonucleic acid /100 g ml^–1/, as compared to 200 g l^–1 of P by the original method. If a larger sample volume /30 ml/ is used, even 5 g l^–1 of P can be measured.     

Quantitative Bestimmung von Paraquat in Urin und Serum durch Differential-Puls-Polarographie

Zusammenfassung Es wird eine empfindliche und spezifische Differential-puls-polarographische Methode zum direkten quantitativen Nachweis von Paraquat (P) in ammoniakalischer Ammoniumchloridlösung (pH 8), Urin (pH 7) und Serum (pH 6,5–8) beschrieben. Die Peakpotentiale (E _p ) in mV, gemessen gegen eine gesättigte Kalomelelektrode, sind für die ammoniakalische Ammoniumchloridlösung –686 mV, für Urin –679 mV und für Serum –692 mV. Die Analysen von Urin und Serum wurden für Paraquat-vergiftete und auch für gesunde Personen mit Paraquatzusatz durchgeführt. Die Zeit für eine vollständige Analyse beträgt 25 min. Die Nachweisgrenze beträgt in der ammoniakalischen Ammoniumchloridlösung 0,03 g P/ml, im Urin 0,05 g P/ml und im Serum 0,03 g P/ml.

---

Quantitative determination of paraquat in urine and serum by differential pulse polarography

Summary A sensitive and specific differential pulse polarographic method for the direct quantitative determination of paraquat (P) in ammoniacal ammonium chloride solution (pH 8), urine (pH 7) and serum (pH 6.5–8) is described. The peak potentials (E _p ) in mV vs. saturated calomel electrode (SCE) were –686 mV for ammoniacal ammonium chloride solution, –679 mV for urine, and –692 mV for serum. Analyses were performed in urine and serum both from persons poisoned with paraquat and from healthy persons. Urine and serum from the latter to which paraquat had been added served as control. The time needed for one complete analysis was 25 min. Detection limits were 0,03 g P/ml for ammoniacal ammonium chloride solution, 0,05 g P/ml for urine and 0,03 g P/ml for serum.

Die Verfasser danken Fräulein M. Schneider und Herrn H. Bewig für die sorgfältige Durchführung von Messungen.     

Determination of levodopa methyl ester and its metabolites in rat serum by CZE with amperometric detection

A reliable and reproducible method, capillary zone electrophoresis with amperometric detection (CZE–AD), has been developed for separation and quantification of levodopa methyl ester (LDME) and its biotransformation products levodopa (L-DOPA) and dopamine (DA) in rat serum. A carbon-disk electrode was used as working electrode. The optimum conditions for CZE detection were 50 mmol L^–1 phosphate solution at pH 7.0 as running buffer, 17 kV as separation voltage, 1.0 V (vs Ag/AgCl, 3.0 mol L^–1) as detection potential, and sample injection for 8 s at 17 kV. The linear ranges were from 2.4×10^–2 to 2.2 g mL^–1 for LDME, 2.9×10^–1 to 49.5 g mL^–1 for L-DOPA, and 1.4×10^–2 to 1.5 g mL^–1 for DA with correlation coefficients of 0.9997, 0.9994, and 0.9999, respectively. The detection limits for LDME, L-DOPA, and DA were 14.6, 98.0, and 9.7 ng mL^–1, respectively. Recoveries were 80.3% for LDME, 93.5% for L-DOPA, and 86.5% for DA. This method was applied to serum samples after intravenous injection of LDME and L-DOPA to rats.     

Flow injection chemiluminescence determination of l-cysteine in amino acid mixture and human urine with the BrO3 −–quinine system

In this paper, a novel flow injection chemiluminescence (CL) determination of l-cysteine is proposed. The method is based on the CL reaction of l-cysteine and KBrO₃ in acidic medium. The CL intensity was greatly enhanced in the presence of quinine. The CL intensity was linear with l-cysteine concentration in the range of 0.2–80 g L^–1, and the detection limit was 0.1 g L^–1 (3). A complete analysis, including sampling and injecting, could be performed in 1 min, giving a throughput of about 60 h^–1. The relative standard deviation was 1.6% for 0.8 g L^–1 l-cysteine (n=11). The proposed method was satisfactorily applied to the determination of cysteine in an amino acid mixture and human urine. The mechanism of the CL reaction is also discussed.     

Direct determination of arsenic in sea water by electrothermal atomization atomic absorption spectrometry using D2 and Zeeman background correction

Arsenic in sea water was determined directly by graphite furnace atomic absorption spectrometry (GFAAS) using palladium nitrate as chemical modifier, at an optimum concentration of 15 mg l^–1. Deuterium and Zeeman effect background correction were compared and gave detection limits of 0.6 and 0.8 g l^–1, respectively. Precisions between 8 and 2%, for both correctors, were obtained with an injection volume of 40 l. The accuracy obtained with different reference materials: CRM-403 (1.461 g kg^–1), NASS-4 (1.26 ±0.09 gl^–1) and IAEA/W-4 (24–31 g l^–1) was studied for large injection volumes for both background correction systems. Interferences by chloride, sodium, potassium, calcium and silicon were removed by Zeeman correction, whereas deuterium correction was much less effective and was insufficiently accurate for sea water samples.     

Determination of Cd, Co, Cr, Cu, Fe, Mn, Ni and Pb in natural waters, alkali and alkaline earth salts by electrothermal atomic absorption spectrometry after preconcentration by column solid phase extraction

Methods are described for the determination of trace and ultra trace amounts of Cd, Co, Cr, Cu, Fe, Mn, Ni and Pb in natural waters, alkali and alkaline earth salts. Separation and preconcentration of trace metals is achieved by a column solid phase extraction procedure using silica gel modified with derivatives of dithiocarbamates — Na-DDTC (sodium diethyldithio-carbamate and HMDTC (ammonium hexamethylene-dithiocarbamate) as column packing material. The influence of the sorbent preparation procedure on the degree of sorption of the trace analytes is examined for different pH values of the sample solution. Isobutylmethyl ketone (IBMK) is proposed as an effective eluent for quantitative elution of retained metal ions. Optimal instrumental parameters for ETAAS determination of preconcentrated elements in organic eluate are presented. Practical application of sorbents in analysis of natural waters and alkali and alkaline earth salts is demonstrated. Proposed preconcentration procedure combined with ETAAS determination of trace analytes allows the determination of 0.04 g l^–1 Cd, 0.1 g l^–1 Cr, Cu, and Mn and 0.3 g l^–1 Co, Fe, Ni and Pb in natural waters and 1.10^–7% Cd, 3.10^–7% Cr and Mn, 7.10^–7% Co, Ni and Pb and 2.10^–6% Cu and Fe in alkali and alkaline earth salts.     

Adsorptive Voltammetric Study of Thorium–Alizarin Complexon Complex at a Carbon Paste Electrode

A new sensitive adsorptive voltammetric procedure is described for trace measurement of thorium. It is based on the cathodic stripping peak of the thorium–alizarin complexon (ALC) complex at a carbon paste electrode (CPE). The complex of Th(IV) with alizarin is adsorbed at a CPE in a mixed buffer solution (pH 5.0) which consists of 0.1mol·L^–1 sodium acetate and 0.04mol·L^–1 potassium biphthalate, yielding a sensitive cathodic voltammetric peak corresponding to the reduction of alizarin in the complex at –0.57V (vs. SCE). The second-order derivative peak current of the complex is linearly dependent upon the concentration of Th(IV) over the range of 3.0×10^–9 8.0×10^–7mol·L^–1. The detection limit is 1.0×10^–9mol·L^–1 for 180s accumulation. The molar ratio of each component in the complex was estimated as n_Th(IV):n_ALC=1:1 by a continuous variation method. The electrode processes of the Th(IV)–alizarin complex at a CPE were investigated. The procedure was successfully applied to the trace determination of thorium in ore and clay samples.     

Multi-residue procedure for the analysis of pesticides in groundwater: Application to samples from the comunidad Valenciana,Spain

Summary A simple multi-residue procedure has been developed and applied to the analysis of pesticides in groundwater samples from the Comunidad Valenciana, a predominantly agricultural area on the Mediterranean coast of Spain. The procedure includes a liquid-liquid extraction, after addition of NaCl on the samples, and a subsequent analysis by capillary gas chromatography using a dual detection system with electron capture and nitrogen-phosphorous detectors. This allows the determination of more than 30 compounds (organophosphorous, organochlorine and pyrethroid pesticides) at the low ppb (g l^–1) levels. Detection limits obtained varied between 0.01 g l^–1 (lindane, fonofos) and 0.5 g l^–1 (cypermethrin). An additional injection of the sample extracts into a gas chromatograph equipped with a column of different polarity and electron capture detector is used for the confirmation of chromatographic peaks. The recommended procedure has been applied to 66 ground water samples. Pesticides, including organophosphorus and organochlorine compounds were detected in 31 of them, in levels ranging from 0.02 to 0.7 g l^–1.     

Silver nanoparticle assemblies supported on glassy-carbon electrodes for the electro-analytical detection of hydrogen peroxide

Electrochemical detection of hydrogen peroxide using an edge-plane pyrolytic-graphite electrode (EPPG), a glassy carbon (GC) electrode, and a silver nanoparticle-modified GC electrode is reported. It is shown, in phosphate buffer (0.05 mol L^–1, pH 7.4), that hydrogen peroxide cannot be detected directly on either the EPPG or GC electrodes. However, reduction can be facilitated by modification of the glassy-carbon surface with nanosized silver assemblies. The optimum conditions for modification of the GC electrode with silver nanoparticles were found to be deposition for 1 min at –0.5 V vs. Ag from 5 mmol L^–1 AgNO₃/0.1 mol L^–1 TBAP/MeCN, followed by stripping for 2 min at +0.5 V vs. Ag in the same solution. A wave, due to the reduction of hydrogen peroxide on the silver nanoparticles is observed at –0.68 V vs. SCE. The limit of detection for this modified nanosilver electrode was 2.0×10^–6 mol L^–1 for hydrogen peroxide in phosphate buffer (0.05 mol L^–1, pH 7.4) with a sensitivity which is five times higher than that observed at a silver macro-electrode. Also observed is a shoulder on the voltammetric wave corresponding to the reduction of oxygen, which is produced by silver-catalysed chemical decomposition of hydrogen peroxide to water and oxygen then oxygen reduction at the surface of the glassy-carbon electrode.