Nucleation-elongation polymerization under imbalanced stoichiometry

As a result of the helical structure of the polymeric product, the folding-driven polymerization of oligo(m-phenyleneethynylene) imines in solution should inherently show nucleation-elongation in chain growth. Here, we present evidence for this behavior based on results of polymerizations conducted under conditions of imbalanced stoichiometry. Because the polymerization proceeds via imine metathesis between a pair of bifunctional monomers of types A-A and B-B, the molar ratio of the polymerizing functional groups can be arbitrarily varied. Alternatively, stoichiometry can be controlled by the addition of a monofunctional oligomer. Similar results were obtained in both cases whereby the molecular weight distribution was significantly different from that expected for classical step-growth polymerizations. At equilibrium, high molecular weight polymers were observed to coexist with the monomer in excess. Thermodynamic equilibrium was established by showing that the same distribution was reached starting either from a monomer mixture or from high polymers to which one monomer was added. These results are in great contrast to the low molecular weight oligomers that were produced when the reaction was conducted by melt condensation of bifunctional aldehyde and amine monomers, a polymerization that apparently proceeds without the nucleation event. An equilibrium model that captures the features of nucleation-elongation under conditions of imbalanced stoichiometry qualitatively supports the monomer-polymer distribution observed experimentally.     

Supramolecular liquid crystallinity as a mechanism of supramolecular polymerization

Two types of supramolecular self-assembling polymers should be distinguished: the open type characterized by units with binding sites exposed to the surface and thus capable of extended growth (e.g. some synthetic and natural supramolecular polymers), and the closed type with binding sites internally compensated yielding well defined oligomeric complexes (e.g. DNA, collagen,haemoglobin). The growth of the open assemblies may be defined as a supramolecular polymerization. Both types form corresponding supramolecular liquid crystalline (SLC) phases, but the behaviour of the closed-type SLC is generally indistinguishable from that of liquid crystals formed by molecularly dispersed units. Quite different is the case of the open-type SLC when the anisotropic forces stabilizing the nematic phase interact with the contact forces that promote the growth of theassembly. In this case a cooperative enhancement of growth occurs simultaneously with the formation of the ordered phase. The theoretical basis for the growth coupled to orientation mechanism, laid down to explain the formation of linear micelle aggregates, may apply to most types of supramolecular polymerization. Outstanding resulting expectations are a large degree of supramolecular polymerization, orientation, superimposition of other growth mechanisms, dampened polydispersity and termination steps.     

Controlled synthesis of organic two-dimensional nanostructures via reaction-driven,cooperative supramolecular polymerization

The bottom-up approach of supramolecular polymerization is an effective synthetic method for functional organic nanostructures. However, the uncontrolled growth and polydisperse structural outcome often lead to low functional efficiency. Thus, precise control over the structural characteristics of supramolecular polymers is the current scientific hurdle. Research so far has tended to focus on systems with inherent kinetic control by the presence of metastable state monomers either through conformational molecular design or by exploring pathway complexity. The need of the hour is to create generic strategies for dormant states of monomers that can be extended to different molecules and various structural organizations and dimensions. Here we venture to demonstrate chemical reaction-driven cooperative supramolecular polymerization as an alternative strategy for the controlled synthesis of organic two-dimensional nanostructures. In our approach, the dynamic imine bond is exploited to convert a non-assembling dormant monomer to an activated amphiphilic structure in a kinetically controlled manner. The chemical reaction governed retarded nucleation–elongation growth provides control over dispersity and size.

We report the kinetically controlled supramolecular polymerization of organic two-dimensional charge-transfer nanostructures via a chemical reaction (imine)-driven approach.     

Thiourea-based bifunctional organocatalysis: supramolecular recognition for living polymerization

A versatile, metal-free, organocatalytic approach to the living ring-opening polymerization of lactide using a bifunctional thiourea-tertiary amine catalyst is described. Mild and highly selective polymerization conditions produced poly(lactides) with predictable molecular weights and extremely narrow polydispersities ( approximately 1.05), characteristic of a living polymerization. The extraordinary selectivity of this catalyst system for polymerization relative to transesterification is remarkably unusual. The low polydispersities and exceptional control observed are a consequence of selective transesterification of lactide relative to the open chain esters. Presumably, the ring strain of lactide provides both a driving force for the polymerization and a kinetic preference for polymerization relative to transesterification with catalyst. We postulate that the initiating/propagating alcohol is activated by acid-base interaction with the tertiary amine moiety and the carbonyl of the lactide monomer is simultaneously activated by hydrogen bonding to the thiourea moiety of the catalyst.     

Calixarene-based supramolecular polymerization in solution

Calixarenes are one kind of phenol-formaldehyde cyclic oligomers, discovered from the Bakelite process. Their intrinsic characteristics, including the unique structural scaffold, facile modification and adjustable inclusion property, show pronounced potential for supramolecular polymerization. In this tutorial review, we summarize the current stage of fabrication of calixarene-based supramolecular polymers. Three types of calixarene-based supramolecular polymers are, respectively, illustrated according to the different activities of calixarenes: (1) calixarene-based supramolecular polycaps, (2) supramolecular polymers with polymeric calixarene scaffolds where the cavities remain unexploited; (3) supramolecular polymers formed by the host-guest interactions offered by calixarene cavities. Furthermore, the stimuli-responsiveness and functions of calixarene-based supramolecular polymers are illustrated, which endow them with a broad range of potential applications as smart, self-healing materials and delivery carriers.     

Terpyridines as supramolecular initiators for living polymerization methods

Bis(5,5″-bis(bromomethyl)-2,2′:6′,2″-terpyridine), bis-4′-(4-bromomethylphenyl)-2,2′:6′,2″-terpyridine and 4-hydroxymethyl-5′,5″-dimethyl-2,2′:6′,2″-terpyridine metal complexes have been used as initiators for the living polymerization of 2-oxazolines and L-lactides. In both cases polymers with controlled molecular weights and narrow molecular weight distributions have been obtained. In-line diode array GPC measurements of iron(II) complexed poly(ethyloxazoline)s showed an unexpected absence of fragmentation. Viscosity experiments demonstrated the differences of the complexed and uncomplexed systems.     

Photoinduced alignment of nanocylinders by supramolecular cooperative motions

A linearly polarized laser beam was used to control nanocylinders self-assembled in an amphiphilic diblock liquid-crystalline copolymer consisting of flexible poly(ethylene oxide) as a hydrophilic block and poly(methacrylate) containing an azobenzene moiety in the side chain as a hydrophobic liquid-crystalline segment. The perfect array of poly(ethylene oxide) nanocylinders was achieved, aligned perpendicularly to the polarization direction of the actinic light by supramolecular cooperative motions between the ordered azobenzene and microphase separation. By the simple and convenient way of photocontrol, the macroscopic parallel patterning of nanocylinders can be easily obtained in an arbitrary area.     

Highly cooperative formation of bis-urea based supramolecular polymers

Eleven bis-ureas have been synthesized, and some of their properties are reported. Several of these compounds form supramolecular polymers in organic solvents. The self-association is shown by FTIR spectroscopy to display cooperativity at two levels. The first level of cooperativity is due to the synergistic association of the two urea functions of a single molecule. The second level of cooperativity is revealed by the fact that the formation of dimers is less favored than that of long oligomers.     

Nucleobase-induced supramolecular polymerization in the solid state

Supramolecular polymerization, that is, the self-assembly of polymer-like materials through the utilization of the noncovalent bond, has been a developing area of research over the last decade. In this article, we report the synthesis of nucleobase-terminated (N⁶-anisoyl-adenine and thymine) low-molecular-weight poly(tetrahydrofuran) macromonomers (<2000 g mol⁻¹). The adenine-derived supramolecular telechelic polymer self-assembled in the solid state to yield materials with film- and fiber-forming capabilities. This material was thermally reversible and exhibited a ceiling temperature, above which a drop in viscosity was observed and fibers could no longer be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3589–3596, 2003     

Functional supramolecular systems with highly cooperative and responding properties

The dynamic processes of host–guest interactions contribute to the multistep regulation of various molecular functions such as the catalysis of chemical reactions, transport of materials, control of reaction pathways, and cooperative and responsive phenomena particularly in biological systems. In this review, we describe artificial metallo‐supramolecular systems, which exhibit highly cooperative and responsive functions to external stimulus, by utilizing formation of the metal complexes and their characteristic properties. Pseudomacrocycles such as pseudocrown ethers and pseudocryptands have been synthesized to control macrocyclic and macrobicyclic effects on guest recognition by using a metal ion as an effector, and remarkably positive and negative allosteric effects have been achieved. Highly cooperative stepwise regulation of the affinity to anions has also been achieved by a pseudocryptand and a salt‐binding host. The electrostatic interactions between the anions and cations are important for the combination specificity of the salts. We also introduce a linear bis‐salamo ligand as a precursor for a novel multimetal cooperative host. A trinuclear zinc complex was formed cooperatively and only the central zinc ion was replaced by lanthanide and calcium ions in a transmetalation way. © 2008 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 8: 240–251; 2008: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.20153     

Dipolar interactions and hydrogen bonding in supramolecular aggregates: understanding cooperative phenomena for 1st hyperpolarizability

Weak intermolecular forces like dipolar interactions and hydrogen-bonding lead to a variety of different packing arrangements of molecules in crystals and self-assemblies. Such differences in the arrangements change the extent of excitonic splitting and excitation spectra in the multichromophore aggregates. In this tutorial review, the role of such interactions in fine tuning the linear and 1st non-linear optical (NLO) responses in molecular aggregates are discussed. The non-additivity of these optical properties arise specifically due to such cooperative interactions. Calculations performed on dimers, trimers and higher aggregates for model systems provide insights into the interaction mechanisms and strategies to enhance the 1st hyperpolarizabilities of pi-conjugated molecular assemblies. Flexible dipole orientations in the alkane bridged chromophores show odd-even variations in their second-harmonic responses that are explained through their dipolar interactions in different conformations. Parameters for the optical applications of molecules arranged in constrained geometry, like in Calix[n]arene, have been elucidated. We also highlight the recent developments in this field of research together with their future prospects.     

Kinetically controlled Ag+-coordinated chiral supramolecular polymerization accompanying a helical inversion

We report kinetically controlled chiral supramolecular polymerization based on ligand–metal complex with a 3 : 2 (L : Ag⁺) stoichiometry accompanying a helical inversion in water. A new family of bipyridine-based ligands (d-L1, l-L1, d-L2, and d-L3) possessing hydrazine and d- or l-alanine moieties at the alkyl chain groups has been designed and synthesized. Interestingly, upon addition of AgNO₃ (0.5–1.3 equiv.) to the d-L1 solution, it generated the aggregate I composed of the d-L1AgNO₃ complex (d-L1 : Ag⁺ = 1 : 1) as the kinetic product with a spherical structure. Then, aggregate I (nanoparticle) was transformed into the aggregate II (supramolecular polymer) based on the (d-L1)₃Ag₂(NO₃)₂ complex as the thermodynamic product with a fiber structure, which led to the helical inversion from the left-handed (M-type) to the right-handed (P-type) helicity accompanying CD amplification. In contrast, the spherical aggregate I (nanoparticle) composed of the d-L1AgNO₃ complex with the left-handed (M-type) helicity formed in the presence of 2.0 equiv. of AgNO₃ and was not additionally changed, which indicated that it was the thermodynamic product. The chiral supramolecular polymer based on (d-L1)₃Ag₂(NO₃)₂ was produced via a nucleation–elongation mechanism with a cooperative pathway. In thermodynamic study, the standard ΔG° and ΔH_e values for the aggregates I and II were calculated using the van''t Hoff plot. The enhanced ΔG° value of the aggregate II compared to that of the formation of aggregate I confirms that aggregate II was thermodynamically more stable. In the kinetic study, the influence of concentration of AgNO₃ confirmed the initial formation of the aggregate I (nanoparticle), which then evolved to the aggregate II (supramolecular polymer). Thus, the concentration of the (d-L1)₃Ag₂(NO₃)₂ complex in the initial state plays a critical role in generating aggregate II (supramolecular polymer). In particular, NO₃⁻ acts as a critical linker and accelerator in the transformation from the aggregate I to the aggregate II. This is the first example of a system for a kinetically controlled chiral supramolecular polymer that is formed via multiple steps with coordination structural change.

The nanoparticles were transformed into the supramolecular polymer as the thermodynamic product, involving a helical inversion from left-handed to right-handed helicity.     

Photoluminescent supramolecular polymers: metal-ion directed polymerization of terpyridine-functionalized perylene bisimide dyes

Perylene bisimide dyes bearing one and two 2,2':6',2"-terpyridine receptor groups were prepared and the structural and optical properties of their Zn2+ complexes were investigated by 1H NMR and fluorescence experiments.     

Oxidative polymerization of hydroquinone using deoxycholic acid supramolecular template

Polyhydroquinone (PHQ) is a redox-active polymer with quinone/hydroquinone redox active units in the main chain and may have potential applications as a mediator in biosensors and biofuel cells. By the oxidative polymerization of hydroquinone (HQ), PHQ can be easily synthesized, but the reaction lacks control over the structure of the product. Deoxycholic acid (DCA) was introduced as a supramolecular template to control the reaction. The reaction rate is 14 times of that in deionized water and twice of that in buffer. The DCA template increases not only the reaction rate, but also the molecular weight of the polymer obtained. The template effect of DCA was attributed to the supramolecular assemblies of DCA formed in the solution. Cyclic voltammetry study indicated the resulting PHQ was redox-active. While the supramolecular assemblies of DCA provided a template for the oxidative polymerization of HQ, the protons released as a by-product of the oxidative polymerization of HQ in turn enhanced the self-assembly of DCA. As a result, DCA microfibers form and separate out of the solution.     

Controlling supramolecular polymerization through multicomponent self‐assembly

The self‐assembly into supramolecular polymers is a process driven by reversible non‐covalent interactions between monomers, and gives access to materials applications incorporating mechanical, biological, optical or electronic functionalities. Compared to the achievements in precision polymer synthesis via living and controlled covalent polymerization processes, supramolecular chemists have only just learned how to developed strategies that allow similar control over polymer length, (co)monomer sequence and morphology (random, alternating or blocked ordering). This highlight article discusses the unique opportunities that arise when coassembling multicomponent supramolecular polymers, and focusses on four strategies in order to control the polymer architecture, size, stability and its stimuli‐responsive properties: (1) end‐capping of supramolecular polymers, (2) biomimetic templated polymerization, (3) controlled selectivity and reactivity in supramolecular copolymerization, and (4) living supramolecular polymerization. In contrast to the traditional focus on equilibrium systems, our emphasis is also on the manipulation of self‐assembly kinetics of synthetic supramolecular systems. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 34–78