Fracture analysis of mode-II crack perpendicular to imperfect bimaterial interface

The problem of a mode-II crack close to and perpendicular to an imperfect interface of two bonded dissimilar materials is investigated.The imperfect interface is modelled by a linear spring with the vanishing thickness.The Fourier transform is used to solve the boundary-value problem and to derive a singular integral equation with the Cauchy kernel.The stress intensity factors near the left and right crack tips are evaluated by numerically solving the resulting equation.Several special cases of the mode-II crack problem with an imperfect interface are studied in detail.The effects of the interfacial imperfection on the stress intensity factors for a bimaterial system of aluminum and steel are shown graphically.The obtained observation reveals that the stress intensity factors are dependent on the interface parameters and vary between those with a fully debonded interface and those with a perfect interface.     

A crack perpendicular to and terminating at a bimaterial interface

Using dislocation simulation approach, the basic equation for a finite crack perpendicular to and terminating at a bimaterial interface is formulated. A novel expansion method is proposed for solving the problem. The complete solution to the problem, including the explicit formulae for theT stresses ahead of the crack tip and the stress intensity factors are presented. The stress field characteristics are analysed in detail. It is found that normal stresses {ie27-1} and {ie27-2} ahead of the crack tip, are characterised byQ fields if the crack is within a stiff material and the parameters |p _T | and |q _T | are very small, whereQ is a generalised stress intensity factor for a crack normal to and terminating at the interface. If the crack is within a weak material, the normal stresses {ie27-3} and {ie27-4} are dominated by theQ field plusT stress. This work was supported by the Swedish Research Council for Engineering Sciences.     

Analysis of mode Ⅲ crack perpendicular to the interface between two dissimilar strips

The present work is concerned with the problem of mode Ⅲ crack perpendicular to the interface of a bi-strip composite. One of these strips is made of a functionally graded material and the other of an isotropic material, which contains an edge crack perpendicular to and terminating at the interface. Fourier transforms and asymptotic analysis are employed to reduce the problem to a singular integral equation which is numerically solved using Gauss-Chebyshev quadrature formulae. Furthermore, a parametric study is carried out to investigate the effects of elastic and geometric characteristics of the composite on the values of stress intensity factor.     

A crack perpendicular to the bimaterial interface in finite solid

The dislocation simulation method is used in this paper to derive the basic equations for a crack perpendicular to the bimaterial interface in a finite solid. The complete solutions to the problem, including the T stress and the stress intensity factors are obtained. The stress field characteristics are investigated in detail. It is found that when the crack is within a weaker material, the stress intensity factor is smaller than that in a homogeneous material and it decreases when the distance between the crack tip and interface decreases. When the crack is within a stiffer material, the stress intensity factor is larger than that in a homogeneous material and it increases when the distance between the crack tip and interface decreases. In both cases, the stress intensity factor will increase when the ratio of the size of a sample to the crack length decreases. A comparison of stress intensity factors between a finite problem and an infinite problem has been given also. The stress distribution ahead of the crack tip, which is near the interface, is shown in details and the T stress effect is considered.     

Finite boundary effects in problem of a crack perpendicular to and terminating at a bimaterial interface

In this paper, the problem of a crack perpendicular to and terminating at an interface in bimaterial structure with finite boundaries is investigated. The dislocation simulation method and boundary collocation approach are used to derive and solve the basic equations. Two kinds of loading form are considered when the crack lies in a softer or a stiffer material, one is an ideal loading and the other one fits to the practical experiment loading. Complete solutions of the stress field including the T stress are obtained as well as the stress intensity factors. Influences of T stress on the stress field ahead of the crack tip are studied. Finite boundary effects on the stress intensity factors are emphasized. Comparisons with the problem presented by Chen et al. (Int. J. Solids and Structure, 2003, 40, 2731–2755) are discussed also.The project supported by the National Natural Science Foundation of China (10202023 and 10272103), and the Key Project of CAS (KJCX2-SW-L2).     

Mechanical modeling and fracture analysis for a non-homogeneous weldment with a crack perpendicular to the interface

A new mechanical model is established for a non-homogeneous weldment with HAZs and fusion zones treated as functionally graded materials. The interface-perpendicular anti-plane fracture problems are analyzed for the HAZ and the weld metal, respectively, by the methods of Fourier integral transform and Cauchy singular integral equation. Lobatto–Chebyshev collocation method put forth by Erdogan and Gupta is employed to obtain numerical results of stress intensity factor (SIF). Parametric studies yield three conclusions: (1) overmatching is more beneficial than undermatching to the reduction of the SIF of a HAZ crack, however, the latter is more effective than the former in reducing the SIF of a weld-metal crack; (2) the optimum value of mismatch factor is 1.0, and values too greater or too smaller than this should be avoided in engineering design; (3) when the mismatch factor is unequal to 1.0, the SIF could be reduced by increasing the absolute value of the non-homogeneity parameters of HAZs.     

三维体内含垂直于双材料界面混合型裂纹的超奇异积分解法

利用双材料位移基本解和Somigliana公式,将三维体内含垂直于双材料界面混合型裂纹问题归结为求解一组超奇异积分方程。使用主部分析法,通过对裂纹前沿应力奇性的分析,得到用裂纹面位移间断表示的应力强度因子的计算公式,进而利用超奇异积分方程未知解的理论分析结果和有限部积分理论,给出了超奇异积分方程的数值求解方法。最后,对典型算例的应力强度因子做了计算,并讨论了应力强度因子数值结果的收敛性及其随各参数变化的规律。     

Integral transform solution of multi-material structure with finite crack perpendicular to the interface

The plane elasticity problem for layered elastic systems containing a finite crack perpendicular to the interface is considered. To derive the singular integral equations. Fourier transform in conjunction with dislocation is used. The singular integral equation is solved with the Lobatto-Chebyshev method commonly applied to such problems. In order to have an idea about the usefulness of the method described, a two-layer structure which contains a cut parallel toh is considered.     

Analysis of a cracked concrete containing an inclusion with inhomogeneously imperfect interface

The distributed dislocation technique is applied to determine the behavior of a cracked concrete matrix containing an inclusion. The analysis of cracked concrete in the presence of inclusions such as steel expansions is a practical problem that needs special attention. The solution to the problem of interaction of an edge dislocation with a circular inclusion having circumferentially inhomogeneously imperfect interface is available in the literature. This analytical solution is used in the distributed dislocation technique to obtain the stress intensity factor for the cracked concrete in the presence of inclusion. The interface of the matrix and the inclusion is assumed inhomogeneously imperfect and the stress intensity factor is determined for the cracked concrete for a case of two identical cracks on diametrically opposite sides of the inclusion. Consideration of this general inhomogeneously imperfect interface is the contribution of this paper. The variation of the inhomogeneity parameters is studied and presented. Additionally, the general assumption for the interface is simplified to the special case of perfectly bonded interface. The observations for the perfect interface are coincident with the previously reported results.     

An approach to the elastic-plastic analysis of the plane strain mode-I crack

This paper presents an approach to the solution of the approximate elastic-plastic analysis for the plane strain mode-I crack.     

Interaction between an edge dislocation and a circular inclusion with an inhomogeneously imperfect interface

This research presents an analytical study of the interaction problem of an edge dislocation with a circular inclusion with a circumferentially inhomogeneously imperfect interface. The interface, which is modeled as a spring (interphase) layer with vanishing thickness, is characterized by that in which there is a displacement jump across the interface in the same direction as the corresponding tractions, and the same degree of imperfection is realized in both the normal and tangential directions. Furthermore, the interface parameter is nonuniform along the interface. In order to arrive at an elementary form solution, we introduce a conformal mapping function. Then the stress field as well as the Peach–Koehler force acting on the edge dislocation can be obtained from the derived complex potentials. Calculations demonstrate that the nonuniform interface parameter has a significant influence on the stress field.     

A piezoelectric material strip with a crack perpendicular to its boundary surfaces

A cracked piezoelectric material strip under combining mechanical and electrical loads is considered. The crack is vertical to the top and bottom edges of the strip. The edges of the strip are parallel to the x-axis and perpendicular to the z-axis. When a piezoelectric ceramic is poled, it exhibits transversely isotropic behavior. Among many possible poled axis orientations, a particular orientation when the poling direction lies parallel to x-axis is examined in this paper. Both impermeable crack and permeable crack assumptions are considered. Numerical results are included for three kinds of fracture mechanics specimens, namely an edge-cracked strip, a double edge-cracked strip, and a center-cracked strip, subjected to uniform tensions and uniform electric displacement loads simultaneously, at the far ends. In addition, an edge-cracked strip under pure bending and uniform electric displacement loads at the far ends is also investigated in this paper.     

Analysis of stress intensity factors of a ring-shaped interface crack

In this paper, numerical solutions of singular integral equations are discussed in the analysis of axi-symmetric interface cracks under torsion and tension. The problems of a ring-shaped interface crack are formulated in terms of a system of singular integral equations on the basis of the body force method. In the numerical analysis, unknown body force densities are approximated by the products of the fundamental density functions and power series, where the fundamental densities are chosen to express a two-dimensional interface crack exactly. The accuracy of the present analysis is verified by comparing the present results with the results obtained by other researchers for the limiting cases of the geometries. The calculation shows that the present method gives rapidly converging numerical results for those problems as well as for ordinary crack problems in homogeneous material. The stress intensity factors of a ring-shaped interface crack are shown in tables and charts with varying the material combinations and also geometrical conditions.     

The singularity behavior of an interface crack under a dynamic load

The singularity behavior of a crack on the interface of two different media under dynamic load is investigated. By introducing a small region in which the crack faces make frictionless contact and making use of a kind of integral equations with moving boundaries, it is proved that there are only square-root singularities near the interface crack tips in case that a dynamic load acts on it. Numerical results show that the normal stress in the contact region remains negative. The results of the stress intensity factor and the length of the crack face contact region are given to illustrate the dynamic behavior of the interface crack.This work is supported by the National Natural Science Foundation of China.     

Nonlinear buckling of a spherical shell embedded in an elastic medium with imperfect interface

This work analyzes nonlinear buckling of a single spherical shell imperfectly bonded to an infinite elastic matrix under a compressive remote load. The inclusion is modeled using a nonlinear shell formulation and the matrix is treated as a linear elastic body. Imperfect bonding conditions are realized through a linear spring interface model. A variational method is used to derive the governing differential equations, which are cast into a tractable set of nonlinear algebraic equations using the Galerkin method. An incremental iterative technique based on the modified Newton–Raphson method is employed to find the critical load of the system. The accuracy and convergence properties of the proposed method are validated through finite element analysis. The study is relevant to the analysis of compressive failure of syntactic foams used in marine and aerospace applications. Results are specialized to glass particle-vinyl ester matrix syntactic foams to test the hypothesis as to whether microballoons’ buckling is a dominant failure mechanism in such composites under compression. Parametric studies are conducted to understand the effect of interfacial properties and inclusion wall thickness on the overall mechanical behavior of the composite. Comparisons between analytical findings and experimental results on compressive response of syntactic foams and isolated microballoons indicate that inclusion buckling is unlikely a determinant of compressive failure in vinyl ester-glass systems. In particular, the matrix is found to exert a beneficial stabilizing effect on the inclusions, which fail under brittle fracture before the onset of buckling.     

Impact response of an interface crack in a hybrid piezoelectric laminate

Summary  In a hybrid laminate containing an interfacial crack between piezoelectric and orthotropic layers, the dynamic field intensity factors and energy release rates are obtained for electro-mechanical impact loading. The analysis is performed within the framework of linear piezoelectricity. By using integral transform techniques, the problem is reduced to the solution of a Fredholm integral equation of the second kind, which is obtained from one pair of dual integral equations. Numerical results for the dynamic stress intensity factor show the influence of the geometry and electric field. Received 29 June 2001; accepted for publication 3 December 2001     

Inplane deformation of a circular inhomogeneity with imperfect interface

The plane elastic problem of a circular inhomogeneity with an imperfect interface of spring-constant-type is reduced to the solution of a Somigliana dislocation problem, when the solution for the corresponding problem with a perfect interface is known. The Burger's vector of the Somigliana dislocation is determined so that its components satisfy two interfacial conditions involving the traction components of the corresponding problem with a perfect interface. Employing complex variables, a two-phase potential solution to the Somigliana dislocation inhomogeneity problem is developed for a general form of the Burger's vector. Detailed results are reported for a uniform eigenstrain in the inhomogeneity, and for a remote uniform heat flow in the matrix. In the latter case, the inhomogeneity behaves as a void, when it begins to slide.     

Singularities of an interface crack in electrostrictive materials

In the present work, the singularities of an interface crack between two dissimilar electrostrictive materials under electric loads are investigated. Within the framework of two-dimensional deformation, the problem is solved using the complex variable method. Three crack models, that is, permeable, impermeable and conducting crack models are considered individually. Complex potentials and intensity factors of total stresses are derived by considering both the Maxwell stresses in the surrounding space at infinity and inside the crack. It is found that, for the above three crack models, the singularities of total stress are the same as those in traditional bi-materials with an interface crack; however, the intensities of the total stress depend on the actual crack model used.