Volumetric properties of ternary (IL + 2-propanol or 1-butanol or 2-butanol + ethyl acetate) systems and binary (IL + 2-propanol or 1-butanol or 2-butanol) and (1-butanol or 2-butanol + ethyl acetate) systems

The experimental densities for the binary or ternary systems were determined at T = (298.15, 303.15, and 313.15) K. The ionic liquid methyl trioctylammonium bis(trifluoromethylsulfonyl)imide ([MOA]⁺[Tf₂N]⁻) was used for three of the five binary systems studied. The binary systems were ([MOA]⁺[Tf₂N]⁻ + 2-propanol or 1-butanol or 2-butanol) and (1-butanol or 2-butanol + ethyl acetate). The ternary systems were {methyl trioctylammonium bis(trifluoromethylsulfonyl)imide + 2-propanol or 1-butanol or 2-butanol + ethyl acetate}. The binary and ternary excess molar volumes for the above systems were calculated from the experimental density values for each temperature. The Redlich–Kister smoothing polynomial was fitted to the binary excess molar volume data. Virial-Based Mixing Rules were used to correlate the binary excess molar volume data. The binary excess molar volume results showed both negative and positive values over the entire composition range for all the temperatures.The ternary excess molar volume data were successfully correlated with the Cibulka equation using the Redlich–Kister binary parameters.     

Thermodynamic properties of (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures at T = (298.15, 303.15, and 308.15) K

Density ρ, viscosity η, and refractive index n_D, values for (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures over the entire range of mole fraction have been measured at temperatures (298.15, 303.15, and 308.15) K at atmospheric pressure. The speed of sound u has been measured at T = 298.15 K only. Using these data, excess molar volume V^E, deviations in viscosity Δη, Lorentz–Lorenz molar refraction ΔR, speed of sound Δu, and isentropic compressibility Δk_s have been calculated. These results have been fitted to the Redlich and Kister polynomial equation to estimate the binary interaction parameters and standard deviations. Excess molar volumes have exhibited both positive and negative trends in many mixtures, depending upon the nature of the second component of the mixture. For the (tetradecane + chlorobenzene) binary mixture, an incipient inversion has been observed. Calculated thermodynamic quantities have been discussed in terms of intermolecular interactions between mixing components.     

Volumetric behavior of the ternary system (methyl tert-butyl ether + methylbenzene + butan-1-ol) and its binary sub-system (methyl tert-butyl ether + butan-1-ol) within the temperature range (298.15 to 328.15) K

Values of the density and speed of sound were measured for the ternary system (methyl tert-butyl ether + methylbenzene + butan-1-ol) within the temperature range (298.15 to 328.15) K at atmospheric pressure by a vibrating-tube densimeter DSA 5000. Two binary sub-systems were studied and published previously while the binary sub-system (methyl tert-butyl ether + butan-1-ol) is a new study in this work. Excess molar volume, adiabatic compressibility, and isobaric thermal expansivity were calculated from the experimental values of density and speed of sound. The excess quantities were correlated using the Redlich–Kister equation. The experimental excess molar volumes were analyzed by means of both the Extended Real Associated Solution (ERAS) model and the Peng–Robinson equation of state. The novelty of this work is the qualitative prediction of ternary excess molar volumes for the system containing auto-associative compound and two compounds that can hetero-associate. The combination of the ERAS model and Peng–Robinson equation of state could help to qualitatively estimate the real behavior of the studied systems because the experimental results lie between these two predictions.     

Application of the PFV EoS correlation to excess molar volumes of (1-ethyl-3-methylimidazolium ethylsulfate + alkanols) at different temperatures

The experimental densities for the binary systems of an ionic liquid and an alkanol {1-ethyl-3-methylimidazolium ethylsulfate [EMIM]⁺ [EtSO₄]^? + methanol or 1-propanol or 2-propanol} were determined at T = (298.15, 303.15, and 313.15) K. The excess molar volumes for the above systems were then calculated from the experimental density values for each temperature. The Redlich–Kister smoothing polynomial was used to fit the experimental results and the partial molar volumes were determined from the Redlich–Kister coefficients. For all the systems studied, the excess molar volume results were negative over the entire composition range for all the temperatures. The excess molar volumes were correlated with the pentic four parameter virial (PFV) equation of state (EoS) model.     

Excess volumes of mixing in (N,N-dimethylacetamide + methanol + water) and (N,N-dimethylacetamide + ethanol + water) at the temperature 313.15 K

Precise excess volumes of mixing measurements at T = 313.15 K are reported over the whole composition range for binary mixtures: (N,N-dimethylacetamide + water), (N,N-dimethylacetamide + methanol), (N,N-dimethylacetamide + ethanol) and for the ternary mixtures (N,N-dimethylacetamide + methanol + water) and (N,N-dimethylacetamide + ethanol + water). For all the systems, large negative deviations from ideality are observed. The binary results have been fitted using the Redlich–Kister type polynomial. The possibility of predicting the ternary results from the binary ones was examined.     

Excess molar volumes and viscosities of (1,1,2,2-tetrabromoethane + 1-alkanols) at T = (293.15 and 303.15) K

Density and viscosity measurements for binary mixtures of (1,1,2,2-tetrabromoethane + 1-pentanol, or + 1-hexanol, or + 1-heptanol, or + 1-octanol, or + 1-decanol) at T = (293.15 and 303.15) K, have been conducted at atmospheric pressure. The excess molar volumes V^E, have been calculated from the experimental measurements, and the results were fitted to Redlich–Kister equation. The viscosity data were correlated with the model of Grunberg and Nissan, and McAllister four-body model. The excess molar volumes of (1,1,2,2-tetrabromoethane + 1-pentanol, or + 1-haxanol, or + 1-heptanol, or + 1-octanol) had a sigmoidal shape and the values varied from negative to positive with the increase in the molar fraction of 1,1,2,2-tetrabromoethane. The remaining binary mixture of (1,1,2,2-tetrabromoethane + 1-decanol) was positive over the entire composition range. The effects of the 1-alkanol chain length as well as the temperature on the excess molar volume have been studied. The results have been qualitatively used to explain the molecular interaction between the components of these mixtures.     

Isothermal (vapour + liquid) equilibrium and thermophysical properties for (1-butyl-3-methylimidazolium iodide + 1-butanol) binary system

Experimental isothermal (vapour + liquid) equilibrium (VLE) data are reported for the binary mixture containing 1-butyl-3-methylimidazolium iodide ([bmim]I) + 1-butanol at three temperatures: (353.15, 363.15, and 373.15) K, in the range of 0 to 0.22 liquid mole fraction of [bmim]I. Additionally, refractive index measurements have been performed at three temperatures: (293.15, 298.15 and 308.15) K in the whole composition range. Densities, excess molar volumes, surface tensions and surface tension deviations of the binary mixture were predicted by Lorenz–Lorentz (n_D-ρ) mixing rule. Dielectric permittivities and their deviations were evaluated by known equations. (Vapour + liquid) equilibrium data were correlated with Wilson thermodynamic model while refractive index data with the 3-parameters Redlich–Kister equation by means of maximum likelihood method. For the VLE data, the real vapour phase behaviour by virial equation of state was considered. The studied mixture presents S-shaped abatement from the ideality. Refractive index deviations, surface tension deviations and dielectric permittivity deviations are positive, while excess molar volumes are negative at all temperatures and on whole composition range. The VLE data may be used in separation processes design, and the thermophysical properties as key parameters in specific applications.     

Densities and volumetric properties of (N-(2-hydroxyethyl)morpholine + ethanol, + 1-propanol, + 2-propanol, + 1-butanol,and + 2-butanol) at (293.15, 298.15, 303.15, 313.15, and 323.15) K

Densities of binary mixtures of N-(2-hydroxyethyl)morpholine with ethanol, 1-propanol, 2-propanol, 1-butanol, and 2-butanol were measured over the entire composition range at temperatures from (293.15 to 323.15) K and atmospheric pressure using a vibrating-tube densimeter. The excess molar volumes, V^E were calculated from density data and fitted to the Redlich–Kister polynomial equation. Apparent molar volumes, partial molar volume at infinite dilution and the thermal expansion coefficient of the mixtures were also calculated. The V^E values were found to be negative over the entire composition range and at all temperatures studied and become less negative with increasing carbon chain length of the alkanols.     

(Vapor-liquid) equilibria and excess Gibbs free energy functions of (ethanol + glycerol), or (water + glycerol) binary mixtures at several temperatures

The vapor pressures of (ethanol + glycerol) and (water + glycerol) binary mixtures were measured by means of two static devices at temperatures between (273 and 353 (or 363)) K. The data were correlated with the Antoine equation. From these data, excess Gibbs free energy functions (G^E) were calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker method. The (ethanol + glycerol) binary system exhibits positive deviations in G^E where for the (water + glycerol) mixture, the G^E is negative for all temperatures investigated over the whole composition. Additionally, the NRTL, UNIQUAC and Modified UNIFAC (Do) models have been used for the correlation or prediction of the total pressure.     

Excess molar volumes and isentropic compressibility of binary systems {trioctylmethylammonium bis(trifluoromethysulfonyl)imide + methanol or ethanol or 1-propanol} at different temperatures

This paper reports measurements of densities for the binary systems of an ionic liquid and an alkanol at T = (298.15, 303.15, and 313.15) K. The IL is trioctylmethylammonium bis(trifluoromethylsulfonyl)imide [OMA]⁺[Tf₂N]^? and the alkanols are methanol, or ethanol, or 1-propanol. The speed of sound at T = 298.15 K for the same binary systems was also measured. The excess molar volumes and the isentropic compressibilities for the above systems were then calculated from the experimental densities and the speed of sound, respectively. Redlich–Kister smoothing polynomial equation was used to fit the excess molar volume and the deviation in isentropic compressibility data. The partial molar volumes were determined from the Redlich–Kister coefficients. For all the systems studied, the excess molar volumes have both negative and positive values, while the deviations in isentropic compressibility are negative over the entire composition range.     

(Vapour + liquid) equilibrium data for the azeotropic {1,1-difluoroethane (R152a) + 1,1,2,2-Tetrafluoroethane (R134)} system at various temperatures from (258.150 to 288.150) K

(Vapour + liquid) equilibrium (VLE) data for the {1,1-difluoroethane (R152a) + 1,1,2,2-Tetrafluoroethane (R134)} system were measured at T = (258.150 to 288.150) K. The experiment is based on a static–analytic method. Experimental data were correlated with the Peng–Robinson equation of state (PR EoS) and the Huron–Vidal (HV) mixing rule involving the NRTL activity coefficient model. The results show good agreement with experimental results for the binary system at each temperature. It was found that the system has a negative azeotropic behaviour within the temperature range measured here.     

Isothermal and isobaric (vapour + liquid) equilibria of (N,N- dimethylformamide + 2-propanol + 1-butanol)

The isothermal and isobaric (vapour  +  liquid) equilibria (v.l.e.) for (N, N - dimethylformamide  +  2-propanol  +  1-butanol) and the binary constituent mixtures were measured with an inclined ebulliometer. The experimental results are analyzed using the UNIQUAC equation with temperature-dependent binary parameters. The comparison between the experimental and literature results for binary systems is given. The ternary v.l.e. values are predicted from the binary results.     

Thermodynamic properties of mixing for (1-alkanol + an-alkane + a cyclic alkane) atT = 298.15 K. I. (n-Hexane + cyclohexane + 1-butanol)

Experimental values of density, refractive index and speed of sound of (hexane  +  cyclohexane  +  1-butanol) were measured at T =  298.15 K and atmospheric pressure. From the experimental data, the corresponding derived properties (excess molar volumes, changes of refractive index on mixing and changes of isentropic compressibility) were computed. Such derived values were correlated using several polynomial equations. Several empirical methods were used in the calculation of the properties of ternary systems from binary data. The Nitta–Chao group contribution model was applied to predict excess molar volume for this mixture.     

(Liquid + liquid) equilibria of three ternary systems: (heptane + benzene + N-formylmorpholine), (heptane + toluene + N-formylmorpholine), (heptane + xylene + N-formylmorpholine) from T = (298.15 to 353.15) K

(Liquid + liquid) equilibrium (LLE) data for ternary systems: (heptane + benzene + N-formylmorpholine), (heptane + toluene + N-formylmorpholine), and (heptane + xylene + N-formylmorpholine) have been determined experimentally at temperatures ranging from 298.15 K to 353.15 K. Complete phase diagrams were obtained by determining solubility and tie-line data. Tie-line compositions were correlated by Othmer–Tobias and Bachman methods. The universal quasichemical activity coefficient (UNIQUAC) and the non-random two liquids equation (NRTL) were used to predict the phase equilibrium in the system using the interaction parameters determined from experimental data. It is found that UNIQUAC and NRTL used for LLE could provide a good correlation. Distribution coefficients, separation factors, and selectivity were evaluated for the immiscibility region.     

High-pressure (vapor + liquid) equilibria in the (nitrogen + n-heptane) system

In this work, new (vapor + liquid) equilibrium data for the (N₂ + n-heptane) system were experimentally measured over a wide temperature range from (313.6 to 523.7) K and pressures up to 50 MPa. A static-analytic apparatus with visual sapphire windows and pneumatic capillary samplers was used in the experimental measurements. Equilibrium phase compositions and (vapor + liquid) equilibrium ratios are reported. The new results were compared with those reported by other authors. The comparison showed that the pressure–composition data reported in this work are less scattered than those determined by others. Hence, the results demonstrate the reliability of the experimental apparatus at high temperatures and pressures. The experimental data were represented with the PR and PC-SAFT equations of state by using one-fluid mixing rules and a single temperature independent interaction parameter. Results of the representation showed that the PC-SAFT equation was superior to the PR equation in correlating the experimental data of the (N₂ + n-heptane) system.     

Densities,speeds of sound,and refractive indices of the ternary mixtures (toluene + methyl acetate + butyl acetate) and (toluene + methyl acetate + methyl heptanoate) at 298.15 K

Density, ρ, speed of sound, u, and refractive index, n_D, at 298.15 K and atmospheric pressure have been measured over the entire composition range for (toluene + methyl acetate + butyl acetate) and (toluene + methyl acetate + methyl heptanoate) systems. Excess molar volumes, V^E, isentropic compressibility, κ_s, isentropic compressibility deviations, Δκ_s, and changes of refractive index on mixing, Δn_D, for the above systems, have been calculated from experimental data and fitted to Cibulka, Singh et al., and Nagata and Sakura equations, standard deviations from the regression lines are shown. Geometrical solution models, Tsao and Smith, Kholer, Jacob and Fitzner, Rastogi et al. were also applied to predict ternary properties from binary contributions.     

Liquid density of biofuel mixtures: (Dibutyl ether + 1-butanol) system at pressures up to 140 MPa and temperatures from (293.15 to 393.15) K

This work reports new experimental density data (445 points) for binary mixtures of (dibutyl ether + 1-butanol) over the composition range (five compositions; 0.15 ? dibutyl ether mole fraction x ? 0.85), from (293.15 to 393.15) K (every 20 K), and for 15 pressures from (0.1 to 140) MPa (every 10 MPa).An Anton Paar vibrating tube densimeter, calibrated with an uncertainty of ±0.5 kg · m^?3 was used to perform these measurements. The experimental density data were fitted with a Tait-like equation with low standard deviations. Excess volumes have been calculated from the experimental data and fitted by the Redlich–Kister equation. In addition, the isobaric thermal expansivity and the isothermal compressibility have been derived from the Tait-like equation.     

Densities of {poly(ethylene glycol) + water} over the temperature range (283.15 to 363.15) K

Densities of {poly(ethylene glycol) [PEG] + water} prepared with PEG average molar mass (200, 400, 600, and 1500) g · mol^?1 have been measured over the entire composition range over the temperature range (283.15 to 363.15) K at 10 K intervals using a density meter based on electromagnetically-induced oscillations of a U-shaped glass tube and an inbuilt Peltier thermostat. The density versus temperature data of (PEG + water) at each composition for all PEGs were fit to a simple quadratic equation: ρ/(g · cm^?3) = ρ₀/(g · cm^?3) + a(T/K) + b(T/K)². Fits were observed to be satisfactory at each composition for all four (PEG + water). The excess molar volumes of (PEG + water) are observed to be negative and significant over the entire composition range for all four (PEG + water). Irrespective of the temperature, the maximum absolute excess molar volumes are observed in the water-rich region of the mixture and are found to decrease with increasing temperature. This is attributed to the presence of strong interactions within the (PEG + water). Specifically, it is proposed to be due to the H-bonding interactions between the PEG and the water molecules within the mixtures.     

Experimental and predicted excess molar enthalpies for 1,4-dioxane + octane + cyclohexane at 303.15 K

Excess molar enthalpies for the ternary system 1,4-dioxane (1) + n-octane (2) + cyclohexane (3) and for the three constituent binary systems have been measured by a Calvet microcalorimeter at 303.15 K and ambient pressure. The experimental binary results were fitted by the Redlich–Kister equation. The excess molar enthalpies of the ternary system were correlated using the Cibulka equation. The DISQUAC group contribution model was applied to predict the excess molar enthalpy for this mixture.     

(Liquid + liquid) equilibria of (sulfolane + benzene + n-hexane), (N-formylmorpholine + benzene + n-hexane), and (sulfolane + N-formylmorpholine + benzene + n-hexane) at temperatures ranging from (298.15 to 318.15) K: Experimental results and correlation

The experimental (liquid + liquid) equilibrium (LLE) properties for two ternary systems containing (N-formylmorpholine + benzene + n-hexane), (sulfolane + benzene + n-hexane) and a quaternary mixed solvent system (sulfolane + N-formylmorpholine + benzene + n-hexane) were measured at temperature ranging from (298.15 to 318.15) K and at an atmospheric pressure. The experimental distribution coefficients and selectivity factors are presented to evaluate the efficiency of the solvents for extraction of benzene from n-hexane. The LLE results obtained indicate that increasing temperature decreases selectivity for all solvents. The LLE results for the systems studied were used to obtain binary interaction parameters in the UNIQUAC model by minimizing the root mean square deviations (RMSD) between the experimental and calculated results. Using the interaction parameters obtained, the phase equilibria in the systems were calculated and plotted. The calculated compositions based on the UNIQUAC model were found to be in good agreement with the experimental values. The result of the RMSD obtained by comparing the calculated and experimental two-phase compositions is 0.0163 for (N-formylmorpholine + benzene + n-hexane) system and is 0.0120 for (sulfolane + benzene + n-hexane) system.