Phase equilibria study of the binary systems (ionic liquid + thiophene): Desulphurization process

(Solid + liquid) equilibria (SLE) and (liquid + liquid) equilibria (LLE) for the binary systems: {ionic liquid (IL) N-butyl-4-methylpyridinium tosylate (p-toluenesulfonate) [BM⁴Py][TOS], or N-butyl-3-methylpyridinium tosylate [BM³Py][TOS], or N-hexyl-3-methylpyridinium tosylate [HM³Py][TOS], or N-butyl-4-methylpyridinium bis{(trifluoromethyl)sulfonyl}imide [BM⁴Py][NTf₂], or 1,4-dimethylpyridinium tosylate [M^1,4Py][TOS], or 2,4,6-collidine tosylate [M^2,4,6Py][TOS], or 1-ethyl-3-methylimidazolium thiocyanate [EMIM][SCN], or 1-butyl-3-methylimidazolium thiocyanate [BMIM][SCN], or 1-hexyl-3-methylimidazolium thiocyanate [HMIM][SCN], or triethylsulphonium bis(trifluoromethylsulfonyl)imide [Et₃S][NTf₂] + thiophene} have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (270 to 390) K. In the case of systems (pyridinium IL, or sulphonium IL + thiophene) the mutual immiscibility with an upper critical solution temperature (UCST) was detected at the very narrow and low mole fraction of the IL. For the binary systems containing (imidazolium thiocyanate IL + thiophene), the mutual immiscibility with the lower critical solution temperature (LCST) was detected at the higher mole fraction range of the IL. The basic thermal properties of the pure ILs, i.e. melting and glass-transition temperatures as well as the enthalpy of fusion have been measured using a differential scanning microcalorimetry technique (DSC). The well-known NRTL equation has been used to correlate experimental SLE/LLE data sets.     

(Solid + liquid) equilibria predictions of ionic liquid containing systems using COSMO-RS

(Solid + liquid) equilibria (SLE) prediction are an important phase equilibria property for ionic liquid (IL) mixtures especially when the IL exists as a solid. In this work, the SLE for the binary systems of (IL + thiophene) consisting of the ILs: n-butyl-4-methylpyridinium tosylate [BM₄Py][TOS], n-butyl-3-methylpyridinium tosylate [BM₃Py][TOS], n-hexyl-3-methylpyridinium tosylate [HM₃Py][TOS], and 1,4-dimethylpyridinium tosylate [M_1,4Py][TOS] are predicted using the quantum chemical based COSMO-RS (COnductor like Screening MOdel for Real Solvents) model. Initially, benchmarking studies are performed on binary mixtures which are known beforehand. The values of the predicted solubility are then compared with the experimental results by calculating the root mean square error (RMSE). The SLE predictions of the solubility of pyrene and dibenzothiophene in five different solvents were carried out giving an average RMSE of 4%. Further the applicability of COSMO-RS to binary systems consisting of (ionic liquid + alcohol) mixtures and (ionic liquid + hydrocarbons) are predicted. The ionic liquids concerned are n-butyl-3-methylpyridinium tosylate [BM₃Py][TOS] while the alcohols and hydrocarbons are 1-butanol, 1-hexanol, 1-octanol, 1-decanol, and benzene, toluene, ethylbenzene, n-propylbenzene respectively. The experimental data for the ionic liquid [BM₄Py][TOS] with thiophene gave the smallest deviation of 10.2%. The overall RMSE for IL–thiophene, IL–alcohol, and IL–hydrocarbons were 15%, 17.2% and 12.9% respectively. Thus the predicted solubility values were found to be in reasonable agreement with the experimental values.     

Phase equilibrium study of the binary systems (N-hexyl-3-methylpyridinium tosylate ionic liquid + water,or organic solvent)

The (solid + liquid) phase equilibrium (SLE) and (liquid + liquid) phase equilibrium (LLE) for the binary systems ionic liquid (IL) N-hexyl-3-methylpyridinium tosylate (p-toluenesulfonate), {([HM³Py][TOS] + water, or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol), or an aromatic hydrocarbon (benzene, toluene, or ethylbenzene, or propylbenzene), or an alkane (n-hexane, n-heptane, n-octane)} have been determined at ambient pressure using a dynamic method. Simple eutectic systems with complete miscibility in the liquid phase were observed for the systems involving water and alcohols. The phase equilibrium diagrams of IL and aromatic or aliphatic hydrocarbons exhibit eutectic systems with immiscibility in the liquid phase with an upper critical solution temperature as for most of the ILs. The correlation of the experimental data has been carried out using the UNIQUAC, Wilson and the non-random two liquid (NRTL) correlation equations. The results reported here have been compared with analogous phase diagrams reported by our group previously for systems containing the tosylate-based ILs.     

Phase equilibria study of the binary systems (1-butyl-3-methylimidazolium tosylate ionic liquid + water,or organic solvent)

(Solid + liquid) phase equilibria (SLE) and (liquid + liquid) phase equilibria (LLE) for the binary systems: ionic liquid (IL) 1-butyl-3-methylimidazolim tosylate (p-toluenesulfonate) {[BMIM][TOS] + water, an alcohol (ethanol, or 1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol), or n-hexane, or an aromatic hydrocarbons (benzene, or toluene, or ethylbenzene, or propylbenzene, or thiophene)} have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (230 to 340) K. For the binary systems containing water, or an alcohol, simple eutectic diagrams were observed with complete miscibility in the liquid phase. As usual, with increasing chain length of the alcohol the solubility decreases. In the case of mixtures {IL + n-hexane, or benzene, or alkylbenzene, or thiophene} the eutectic systems with mutual immiscibility in the liquid phase with an upper critical solution temperature (UCST) were detected. The basic thermal properties of the pure IL, i.e. melting and glass-transition temperatures, as well as the enthalpy of fusion have been measured using a differential scanning microcalorimetry technique (DSC). Density at high temperatures was determined and extrapolated to 298.15 K. Well-known UNIQUAC, Wilson and NRTL equations have been used to correlate experimental SLE data sets for alcohols and water. For the systems containing immiscibility gaps {IL + n-hexane, or benzene, or alkylbenzene, or thiophene}, parameters of the LLE correlation equation have been derived using only the NRTL equation.     

(Vapor + liquid) equilibria of binary mixtures containing light alcohols and ionic liquids

This work presents (vapor + liquid) equilibrium (VLE) of binary mixtures containing methanol or ethanol and three imidazolium based ionic liquids: 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium acetate, and 1-butyl-3-methylimidazolium hydrogen sulfate. VLE measurements were carried out over the whole range of composition between (283.15 and 298.15) K using a static apparatus. Activity coefficients γ_i of these solvents in the ionic liquids have been determined from the VLE data and correlated using the NRTL model. The results show that the NRTL model can be applied successfully with systems containing ionic liquids.     

Vapor pressures and activity coefficients of binary mixtures of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide with acetonitrile and tetrahydrofuran

A new apparatus for the determination of VLE has been constructed which works for absolute pressure measurements as well as for measuring differential pressures. The first results obtained are (vapor + liquid) equilibria (VLE) of binary mixtures containing acetonitrile or tetrahydrofuran and the ionic liquid (IL) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIm][NTf2] by using the absolute pressures method. VLE measurements were carried out over the whole concentration range at four different temperatures between 293.15 K and 313.15 K. Activity coefficients (γ₁) of the solvents in [EMIm][NTf2] and their osmotic coefficients (ϕ₁) have been determined from the VLE data.     

Isothermal (vapour + liquid) equilibrium and thermophysical properties for (1-butyl-3-methylimidazolium iodide + 1-butanol) binary system

Experimental isothermal (vapour + liquid) equilibrium (VLE) data are reported for the binary mixture containing 1-butyl-3-methylimidazolium iodide ([bmim]I) + 1-butanol at three temperatures: (353.15, 363.15, and 373.15) K, in the range of 0 to 0.22 liquid mole fraction of [bmim]I. Additionally, refractive index measurements have been performed at three temperatures: (293.15, 298.15 and 308.15) K in the whole composition range. Densities, excess molar volumes, surface tensions and surface tension deviations of the binary mixture were predicted by Lorenz–Lorentz (n_D-ρ) mixing rule. Dielectric permittivities and their deviations were evaluated by known equations. (Vapour + liquid) equilibrium data were correlated with Wilson thermodynamic model while refractive index data with the 3-parameters Redlich–Kister equation by means of maximum likelihood method. For the VLE data, the real vapour phase behaviour by virial equation of state was considered. The studied mixture presents S-shaped abatement from the ideality. Refractive index deviations, surface tension deviations and dielectric permittivity deviations are positive, while excess molar volumes are negative at all temperatures and on whole composition range. The VLE data may be used in separation processes design, and the thermophysical properties as key parameters in specific applications.     

Ebulliometric determination and prediction of (vapor + liquid) equilibria for binary and ternary mixtures containing alcohols (C1–C4) and dimethyl carbonate

(Vapor + liquid) equilibrium (VLE) data for a ternary mixture, namely {methanol + propan-1-ol + dimethyl carbonate (DMC)}, and four binary mixtures, namely an {alcohol (C₃ or C₄) + DMC}, containing the binary constituent mixtures of the ternary mixture, were measured at p = (40.00 to 93.32) kPa using a modified Swietoslawski-type ebulliometer. The experimental data for the binary systems were correlated using the Wilson model. The Wilson model was also applied to the ternary system to predict the VLE behavior using parameters from the binary mixtures. The modified UNIFAC (Dortmund) model was also tested for the predictions of the VLE behavior of the binary and ternary mixtures. In addition, the experimental VLE data for the ternary and constituent binary mixtures were correlated using the extended Redlich–Kister (ERK) model, which can completely represent the azeotropic points. For the ternary system, a comparison of the experimental and the predicted or correlated boiling points obtained using the Wilson and ERK models showed that the ERK model is more accurate. The valley line, i.e., the curve which divides the patterns of vapor–liquid tie lines, was found in the (methanol + propan-1-ol + DMC) system. This valley line could be represented by the ERK model. Finally, the composition profile for simple distillation of this ternary mixture was obtained by analysis of the residue curves from the estimated Wilson parameters of the constituent binary mixtures.     

Isobaric (vapor + liquid) equilibrium data for the binary system methanol + 2-butyl alcohol and the quaternary system methyl acetate + methanol + 2-butyl alcohol + 2-butyl acetate at P = 101.33 kPa

In this paper, isobaric (vapor + liquid) equilibrium (VLE) data for the binary system methanol + 2-butyl alcohol and the quaternary system methyl acetate + methanol + 2-butyl alcohol + 2-butyl acetate were determined at P = 101.33 kPa in a modified Rose still. The binary VLE data were found to be thermodynamic consistency by the Herrington method. The VLE data for the binary system were correlated by the Wilson and NRTL equations respectively, which were used to predict the VLE data of the quaternary system. The results showed that the Wilson and NRTL models matched well with the (vapor + liquid) phase equilibrium data. The deviations for the vapor-phase compositions and the equilibrium temperatures are reasonably small and the models are both suitable for these systems.     

Vapor pressures,excess enthalpies,and specific heat capacities of the binary working pairs containing the ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate

In present research the binary solutions containing ionic liquid (IL), 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM] [DMP]), are considered as new working pairs for absorption heat pumps or absorption refrigerators. The IL was synthesized in the lab and mixed with water, ethanol, or methanol. Experimental (vapor + liquid) equilibrium (VLE) of these binary systems was measured at different mole fractions ranging from 0.1 to 0.5 and was correlated by the NRTL equation within the average relative deviation of 2%, which means that the (vapor + liquid) equilibrium of these binary solutions containing ionic liquid can be predicted by traditional non-electrolyte solution model. Meanwhile these binary solutions are a negative deviation from Raoult’s law. Excess enthalpy of these binary systems was measured at the temperature of T = 298.15 K and at the pressure of 1 atm. The results indicate that the mixing processes of [EMIM] [DMP] with water, ethanol, or methanol are exothermal, which is a very important characteristic for working pairs used in absorption heat pumps or in absorption refrigerators.     

Isobaric (vapour + liquid) equilibrium for N-methyl-2-pyrrolidone with branched alcohols

The (vapour + liquid) equilibrium (VLE) and boiling temperature measurements have been determined at 95.3 kPa as a function of composition for the binary liquid mixtures of N-methyl-2-pyrrolidone (NMP) with branched alcohols using a Swietoslawski-ebulliometer. The branched alcohols include 2-propanol, 2-butanol, 2-methyl-l- propanol, 2-methyl-2-propanol, and 3-methyl-l-butanol. The experimental temperature-composition (T–x) results were used to estimate Wilson parameters and then used to calculate the equilibrium vapour compositions and the excess Gibbs free energy at T = 298.15 K. The experimental temperature-composition (T, x) results were correlated with the Wilson, the NRTL and the UNIQUAC models. The experimental results are interpreted in terms of intermolecular interactions between constituent molecules.     

Use of selective ionic liquids and ionic liquid/salt mixtures as entrainer in a (vapor + liquid) system to separate n-heptane from toluene

During the last years, a large number of studies have evaluated the ability of ionic liquids (ILs) to separate aromatic from aliphatic hydrocarbons by liquid extraction. Nevertheless, in order to design a global process, a post-extraction step based on the aromatic recovery from the extract stream and the regeneration of the IL is required. Taking into account the negligible vapor pressure of the ILs, the use of separation units based on the difference of volatility among the components of the extract could be an appropriate way. However, that requires additional (vapor + liquid) equilibrium (VLE) data, which are scarce today. In this work, the isothermal VLE data for {n-heptane + toluene + 1-ethyl-3-methylimidazolium thiocyanate ([EMim][SCN])} and {n-heptane + toluene + 1-butyl-3-methylimidazolium thiocyanate ([BMim][SCN])} mixtures were experimentally measured at T = (323.2, 343.2 and 363.2) K over the whole composition range within the rich-IL miscibility region. For that, a static headspace gas chromatograph (HS-GC) was used. In addition, the non-random two liquids (NRTL) thermodynamic model was satisfactory applied to correlate the experimental VLE data.Finally, the effect of thiocyanate-based inorganic salts (AgSCN, Co(SCN)₂ and CuSCN) on the phase behavior of the above mentioned mixtures were also analyzed through the experimental determination of the isothermal VLE of the pseudo-ternary systems {n-heptane + toluene + [EMim][SCN]/salt mixture}.The obtained results show that the use of pure thiocyanate-based ILs as entrainer increases the n-heptane relative volatility from toluene whereas the addition of inorganic salts has not led to an improvement of these results.     

Thermodynamic properties of binary mixtures combining two pyridinium-based ionic liquids and two alkanols

Densities and speeds of sound have been determined for the binary mixtures containing an ionic liquid (1-butyl-3-methylpyridinium tetrafluoroborate or 1-butyl-4-methylpyridinium tetrafluoroborate) and an alkanol (methanol or ethanol) over the temperature range (293.15 to 323.15) K. Excess volumes and excess isentropic compressibilities have been calculated from density and speed of sound data and correlated. All the mixtures show negative values for these excess properties. Furthermore, the isothermal (vapour + liquid) equilibrium has been measured at T = (303.15 and 323.15) K, and the corresponding activity coefficients and excess Gibbs functions have been obtained. In this case, positive excess Gibbs functions have been found. We have carried out an exhaustive interpretation of the experimental results in terms of structural and energetic effects taking also into account the thermodynamic information of pure compounds. Finally, in order to study the influence of both, the presence and the position of methyl group in the cation, we have compared the results of these systems with those obtained for the mixtures formed by 1-butylpyridinium tetrafluoroborate and methanol or ethanol.     

Isobaric (vapour + liquid) equilibria for N-formylmorpholine with ethylbenzene,n-butylbenzene,iso-propylbenzene and 1,2,4-trimethylbenzene at 101.33 kPa

The isobaric (vapour + liquid) equilibrium (VLE) of N-formylmorpholine with aromatics (ethylbenzene, n-butylbenzene, isopropylbenzene, 1,2,4-trimethylbenzene) at 101.33 kPa was investigated. The experimental VLE data for the four binary systems were tested and verified to be thermodynamically consistent by the Herington analysis method. At the same time, the non-random two-liquid (NRTL) and universal quasi-chemical (UNIQUAC) activity coefficient models were used to correlate the experimental data with temperature-independent parameters. The average absolute deviations of the temperature correlated by NRTL model and UNIQUAC model for all the systems are below 0.62 K and the average absolute deviations for the vapour phase compositions are all below 0.083. In addition, the UNIFAC (Do) group contribution model was used to correlate and estimate the VLE data. The N-formylmorpholine was treated as a group (NFM). The group interaction parameters for CH₂-NFM, ACH-NFM and ACCH₂-NFM were regressed. The UNIFAC (Do) model can correlate the experimental data well. The group interaction parameters were used to estimate VLE data of the (o-xylene + N-formylmorpholine), (m-xylene + N-formylmorpholine) and (p-xylene + N-formylmorpholine) binary systems. The estimated data fit well with the literature data. The average absolute deviations of the temperature for N-formylmorpholine with (o-xylene, m-xylene, p-xylene) are 1.67 K, 1.77 K and 1.35 K, respectively, and the average absolute deviations for the vapour phase compositions of o-xylene, m-xylene and p-xylene are 0.0133, 0.0057 and 0.0059, respectively.     

(Vapour + liquid) equilibrium of binary mixtures (1,3-dioxolane or 1,4-dioxane + 2-methyl-1-propanol or 2-methyl-2-propanol) at isobaric conditions

Isobaric (vapour + liquid) equilibrium of (1,3-dioxolane or 1,4-dioxane + 2-methyl-1-propanol or 2-methyl-2-propanol) at 40.0 kPa and 101.3 kPa has been studied with a dynamic recirculating still. The experimental VLE data are thermodynamically consistent. From these data, activity coefficients were calculated and correlated with the Margules, van Laar, Wilson, NRTL and UNIQUAC equations. The VLE results have been compared with the predictions by the UNIFAC and ASOG methods.     

Isothermal and isobaric (vapour + liquid) equilibria of (N,N- dimethylformamide + 2-propanol + 1-butanol)

The isothermal and isobaric (vapour  +  liquid) equilibria (v.l.e.) for (N, N - dimethylformamide  +  2-propanol  +  1-butanol) and the binary constituent mixtures were measured with an inclined ebulliometer. The experimental results are analyzed using the UNIQUAC equation with temperature-dependent binary parameters. The comparison between the experimental and literature results for binary systems is given. The ternary v.l.e. values are predicted from the binary results.     

Thermodynamic properties of 1-butyl-3-methylpyridinium tetrafluoroborate

Pressure, density, temperature (p, ρ, T) data of 1-butyl-3-methylpyridinium tetrafluoroborate [C4mpyr][BF₄] at T = (283.15 to 393.15) K and pressures up to p = 100 MPa are reported with an estimated experimental relative combined standard uncertainty of Δρ/ρ = ±(0.01 to 0.08)% in density. The measurements were carried out with a newly constructed Anton-Paar DMA HPM vibration-tube densimeter. The system was calibrated using double-distilled water, methanol, toluene and aqueous NaCl solutions. An empirical equation of state for fitting of the (p, ρ, T) data of [C4mpyr][BF₄] has been developed as a function of pressure and temperature to calculate the thermal properties of the ionic liquid (IL), such as isothermal compressibility, isobaric thermal expansibility, differences in isobaric and isochoric heat capacities, thermal pressure coefficient and internal pressure. Internal pressure and the temperature coefficient of internal pressure data were used to make conclusions on the molecular characteristics of the IL.     

Density and surface tension of pure ionic liquid 1-butyl-3-methyl-imidazolium l-lactate and its binary mixture with alcohol and water

The density and surface tension of the pure ionic liquid 1-butyl-3-methyl-imidazolium l-lactate were measured from T (293.15 to 343.15) K. The coefficient of thermal expansion, molecular volume, standard entropy, lattice energy, surface entropy, surface enthalpy, and enthalpy of vaporization were calculated from the experimental values. Density and surface tension were also determined for binary mixtures of {1-butyl-3-methyl-imidazolium l-lactate + water/alcohol (methanol, ethanol, and 1-butanol)} systems over the whole composition range from T (298.15 to 318.15) K at atmospheric pressure. The partial molar volume, excess partial molar volume and apparent molar volume of the component IL and alcohol/water in the binary mixtures were discussed as well as limiting properties at infinite dilution and the thermal expansion coefficients of the four binary mixtures. The surface properties of the four binary mixtures were also discussed.     

Isothermal (vapour + liquid) equilibrium (VLE) for binary mixtures containing diethyl carbonate,phenyl acetate,diphenyl carbonate,or ethyl acetate

The isothermal (vapour + liquid) equilibrium (VLE) (P–T–x_i–y_i) was determined the binary systems of (ethyl acetate + diethyl carbonate) from T = (373.2 to 453.2) K, (ethyl acetate + phenyl acetate) at T = 373.2 K, and (diethyl carbonate + phenyl acetate) at T = 373.2 K, while the VLE (P–T–x_i) of three diphenyl carbonate-containing binary systems was also determined experimentally at temperatures from (373.2 to 453.2) K. The experimental results show no azeotrope formation and near ideal solution behaviour for each binary system. These new VLE (P–T–x_i–y_i) data have been passed by the point, area, and infinite dilution thermodynamic consistency tests. The Wilson-HOC, the NRTL-HOC, and the UNIQUAC-HOC models were applied to correlate the VLE results and the optimal values of the model parameters have been determined through data reduction. Comparable results were obtained from these three models.     

Ethanol extraction from its azeotropic mixture with hexane employing different ionic liquids as solvents

In this work, the ionic liquids 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMim][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [BMim][NTf₂], 1-butyl-3-methylpyridinium bis(trifluoromethylsulfonyl)imide, [BMpy][NTf₂], 1-butyl-3-methylpyridinium trifluoromethanesulfonate, [BMpy][TfO], have been investigated for their use as solvents in extraction processes for the ethanol removal from its azeotropic mixture with hexane. Therefore, the experimental determination of the liquid + liquid equilibrium for the ternary systems {hexane (1) + ethanol (2) + [EMim][NTf₂] (3)}, {hexane (1) + ethanol (2) + [BMim][NTf₂] (3)}, {hexane (1) + ethanol (2) + [BMpy][NTf₂] (3)} and {hexane (1) + ethanol (2) + [BMpy][TfO] (3)} was carried out at T = 298.15 K and atmospheric pressure. Classical parameters such as selectivity and solute distribution ratio, derived from the tie-line data, were calculated and afterwards, the structural influence of the ionic liquids on the extraction process was analyzed. Finally, the experimental LLE data were correlated by means of the NRTL and UNIQUAC models.