Densities,excess volumes,isobaric expansivity,and isothermal compressibility of the (1-ethyl-3-methylimidazolium ethylsulfate + methanol) system at temperatures (283.15 to 333.15) K and pressures from (0.1 to 35) MPa

Densities of pure 1-ethyl-3-methylimidazolium ethylsulfate ionic liquid – [C₂mim][EtSO₄] and its mixtures with methanol have been measured with an accuracy of ±0.2 kg · m^?3, over the temperature range (283.15 to 333.15) K and pressure range (0.1 to 35) MPa, using a vibrating tube densimeter. Excess volumes have been calculated directly from the experimental densities. The latter data have been correlated by the Tait equation with the temperature dependent parameters for the pure ionic liquid and by a van Laar-type equation, involving parameters dependent on temperature and pressure for the mixtures. The isobaric expansivity, isothermal compressibility, and related excess properties have been calculated. The exceptionally strong influence of pressure and temperature on these properties has been observed.     

Thermodynamic properties and polymorphism of 1-alkyl-3-methylimidazolium bis(triflamides)

Heat capacities in a range of temperatures of (5 to 370) K, enthalpies and temperatures of phase transitions for 1-ethyl-3-methylimidazolium bis(triflamide) ([C₂mim][NTf₂]) and 1-octyl-3-methylimidazolium bis(triflamide) ([C₈mim][NTf₂]) have been determined by adiabatic calorimetry. [C₂mim][NTf₂] has been found to form four crystalline phases with different fusion temperatures. Formation of the phases can be controlled by the temperature of annealing during crystallization. [C₈mim][NTf₂] forms three sequences of crystalline modifications, each including two polymorphs. Based on results of the measurements, thermodynamic functions for the compounds under study have been calculated.A heat-capacity anomaly near T = 230 K reported earlier for [C₄mim][NTf₂] and [C₆mim][NTf₂] have been found in some crystalline modifications of both the studied compounds. The position of the anomaly depends on the temperature of annealing of the crystals.     

(Liquid + liquid) equilibria for mixtures of dodecane and ethanol with alkylsulfate-based ionic liquids

The ternary (liquid + liquid) equilibrium (LLE) data for mixtures of dodecane (C₁₂H₂₆) and ethanol with ionic liquids 1,3-dimethylimidazolium methylsulfate [Mmim][MeSO₄], 1-ethyl-3-methylimidazolium methylsulfate, [Emim][MeSO₄] and 1-butyl-3-methylimidazolium methylsulfate, [Bmim][MeSO₄], were studied at T = 298.15 K and 0.101 MPa. The selectivity and solute distribution coefficient ratios determined from the data were used to examine the possibility of using these ionic liquids for extraction of ethanol from dodecane. The temperature dependency was investigated by measuring the LLE data for {dodecane + ethanol + [Mmim][MeSO₄]} at T = 313.15 K and 0.101 MPa. The Othmer–Tobias and Hand equations were used to test the consistency of the tie-line data. The tie-line data were correlated with the Non-Random Two Liquid (NRTL) equation which provided a good model and representation for the experimental results.     

Liquid–liquid miscibility and volumetric properties of aqueous solutions of ionic liquids as a function of temperature

The volumetric properties of seven {water + ionic liquid} binary mixtures have been studied as a function of temperature from (293 to 343) K. The phase behaviour of the systems was first investigated using a nephelometric method and excess molar volumes were calculated from densities measured using an Anton Paar densimeter and fitted using a Redlich–Kister type equation. Two ionic liquids fully miscible with water (1-butyl-3-methylimidazolium tetrafluoroborate ([C₁C₄Im][BF₄]) and 1-ethyl-3-methylimidazolium ethylsulfate ([C₁C₂Im][EtSO₄])) and five ionic liquids only partially miscible with water (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₂Im][NTf₂]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₄Im][NTf₂]), 1-butyl-3-methylimidazolium hexafluorophosphate ([C₁C₄Im][PF₆]), 1-butyl-3-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C₁C₄Pyrro][NTf₂]), and butyltrimethylammonium bis(trifluoromethylsulfonyl)imide ([N₄₁₁₁][NTf₂])) were chosen. Small excess volumes (less than 0.5 cm³ · mol^?1 at 298 K) are obtained compared with the molar volumes of the pure components (less than 0.3% of the molar volume of the pure ionic liquid). For all the considered systems, except for {[C₁C₂Im][EtSO₄] + water}, positive excess molar volumes were calculated. Finally, an increase of the non-ideality character is observed for all the systems as temperature increases.     

Heat capacities at 298.15 K of the extended [CnC1im][Ntf2] ionic liquid series

High-precision heat capacities at 298.15 K of the [C_nC₁im][Ntf₂] ionic liquid series were measured with an uncertainty of less than ±0.3%, using a drop heat capacity apparatus that was recently updated. The dependence of the $c_p^o$ values on the alkyl side chain length for the extended ionic liquid series [C_nC₁im][Ntf₂] (with n = 2 to 8, 10, and 12) displays a trend shift at [C₆C₁im][Ntf₂], which is taken as an evidence for percolation limit. Above this limit there is an increase in the methylene group contribution to the molar heat capacity which is in agreement with the higher molar absolute entropies change observed from the (liquid + vapor) equilibrium results. The obtained experimental results support the model that the ionic liquids tend to be segregated into a polar network and non-polar domains, being followed by an increase of the entropy contribution of the non-polar domains.     

Relative hydrophobicity of equilibrium phases in biphasic systems (ionic liquid + water)

Partition coefficients for a series of dinitrophenylated (DNP) amino acids in biphasic systems composed of hydrophobic ionic liquids and water were experimentally determined. The ionic liquids used were three 1-alkyl-3-methylimidazolium tetrafluoroborates, [C_nmim][BF₄], with alkyl chain substituents hexyl, octyl, and decyl. The liquid–liquid phase diagram for the system ([C₁₀mim][BF₄] + water) was experimentally determined. DNP amino acids distribute preferentially to the IL-rich phase and ([C₁₀mim][BF₄] + water) was found to be the system with the lowest partition coefficients for the solutes studied. The experimental partition coefficients decrease as the size of the alkyl side chain in the ionic liquids increases. The free energy of transfer of a methylene group between phases was calculated through the partition coefficients, which provides a measure of the relative hydrophobicity of the equilibrium phases. It was found that the system ([C₁₀mim][BF₄] + water) presents a lower free energy (and thus a lower relative hydrophobicity) than the system ([C₈mim][BF₄] + water). In order to better understand this result, the micellar behavior of the three ionic liquids was studied. Electrical conductivities of several aqueous solutions of the ionic liquids were measured to determine the critical micelle concentration (CMC) and the degree of micelle ionization, α, of the three ionic liquids. From these two properties it was possible to obtain the free energy of micellization, ΔG_mic, for the ionic liquids.     

Thermodynamic properties of 1-butyl-3-methylpyridinium tetrafluoroborate

Pressure, density, temperature (p, ρ, T) data of 1-butyl-3-methylpyridinium tetrafluoroborate [C4mpyr][BF₄] at T = (283.15 to 393.15) K and pressures up to p = 100 MPa are reported with an estimated experimental relative combined standard uncertainty of Δρ/ρ = ±(0.01 to 0.08)% in density. The measurements were carried out with a newly constructed Anton-Paar DMA HPM vibration-tube densimeter. The system was calibrated using double-distilled water, methanol, toluene and aqueous NaCl solutions. An empirical equation of state for fitting of the (p, ρ, T) data of [C4mpyr][BF₄] has been developed as a function of pressure and temperature to calculate the thermal properties of the ionic liquid (IL), such as isothermal compressibility, isobaric thermal expansibility, differences in isobaric and isochoric heat capacities, thermal pressure coefficient and internal pressure. Internal pressure and the temperature coefficient of internal pressure data were used to make conclusions on the molecular characteristics of the IL.     

Thermodynamic properties of 1-alkyl-3-methylimidazolium bromide ionic liquids

Heat capacities and enthalpies of phase transitions for a series of 1-alkyl-3-methylimidazolium bromide ionic liquids have been measured by adiabatic calorimetry. Thermodynamic properties of the compounds were calculated in the temperature range of (5 to 370) K. Water was found to have an additive contribution to the heat capacities of [C₄mim]Br in the liquid state above T_fus and in the solid state below 160 K at w(H₂O) ⩽ 5 · 10⁻³.     

Phase equilibria study of the binary systems (ionic liquid + thiophene): Desulphurization process

(Solid + liquid) equilibria (SLE) and (liquid + liquid) equilibria (LLE) for the binary systems: {ionic liquid (IL) N-butyl-4-methylpyridinium tosylate (p-toluenesulfonate) [BM⁴Py][TOS], or N-butyl-3-methylpyridinium tosylate [BM³Py][TOS], or N-hexyl-3-methylpyridinium tosylate [HM³Py][TOS], or N-butyl-4-methylpyridinium bis{(trifluoromethyl)sulfonyl}imide [BM⁴Py][NTf₂], or 1,4-dimethylpyridinium tosylate [M^1,4Py][TOS], or 2,4,6-collidine tosylate [M^2,4,6Py][TOS], or 1-ethyl-3-methylimidazolium thiocyanate [EMIM][SCN], or 1-butyl-3-methylimidazolium thiocyanate [BMIM][SCN], or 1-hexyl-3-methylimidazolium thiocyanate [HMIM][SCN], or triethylsulphonium bis(trifluoromethylsulfonyl)imide [Et₃S][NTf₂] + thiophene} have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (270 to 390) K. In the case of systems (pyridinium IL, or sulphonium IL + thiophene) the mutual immiscibility with an upper critical solution temperature (UCST) was detected at the very narrow and low mole fraction of the IL. For the binary systems containing (imidazolium thiocyanate IL + thiophene), the mutual immiscibility with the lower critical solution temperature (LCST) was detected at the higher mole fraction range of the IL. The basic thermal properties of the pure ILs, i.e. melting and glass-transition temperatures as well as the enthalpy of fusion have been measured using a differential scanning microcalorimetry technique (DSC). The well-known NRTL equation has been used to correlate experimental SLE/LLE data sets.     

Study on the enthalpy of solution and enthalpy of dilution for the ionic liquid [C3mim][Val] (1-propyl-3-methylimidazolium valine)

A new amino acid ionic liquid (AAIL) [C₃mim][Val] (1-propyl-3-methylimidazolium valine) was prepared by the neutralization method. Using the solution-reaction isoperibol calorimeter, molar solution enthalpies of the ionic liquid [C₃mim][Val] with known amounts of water and with different concentrations in molality were measured at T = 298.15 K. In terms of standard addition method (SAM) and Archer’s method, the standard molar enthalpy of solution for [C₃mim][Val] without water, ${\mathrm{\Delta }}_{\text{s}}{H}_{\text{m}}^{\circ }$ = (−55.7 ± 0.4) kJ · mol⁻¹, was obtained. The hydration enthalpy of the cation [C₃mim]⁺, ΔH₊ ([C₃mim]⁺) = −226 kJ · mol⁻¹, was estimated in terms of Glasser’s theory. Using the RD496-III heat conduction microcalorimeter, the molar enthalpies of dilution, Δ_DH_m(m_i → m_f), of aqueous [C₃mim][Val] with various values of molality were measured. The values of Δ_DH_m(m_i → m_f) were fitted to Pitzer’s ion-interaction model and the values of apparent relative molar enthalpy, ^φL, calculated using Pitzer’s ion-interaction model.     

Activity and stability of horseradish peroxidase in hydrophilic room temperature ionic liquid and its application in non-aqueous biosensing

The activity and stability of horseradish peroxidase (HRP) were investigated in a hydrophilic room temperature ionic liquid 1-butyl-3-methylimidazolium tetrafluroborate ([bmim][BF₄]) by electrochemical methods. Although no detectable activity exhibited in anhydrous [bmim][BF₄], HRP was active in the presence of a small amount of water (4.53%, v/v). And its activity can be improved by immobilization in agarose hydrogel. The immobilized HRP possesses excellent activity at 65 °C. It remained 80.2% of its initial activity after being immersed for 10.5 h in an aqueous mixture of [bmim][BF₄] with some hydrogen peroxide (H₂O₂) under room temperature, implying extremely high stability. Moreover, the immobilized HRP was found to be very sensitive and stable in H₂O-containing [bmim][BF₄] for the detection of H₂O₂, with a wide linear range of 6.10 × 10⁻⁷ to 1.32 × 10⁻⁴ mol l⁻¹ and low detection limit of 1.0 × 10⁻⁷ mol l⁻¹.     

(Vapour + liquid) equilibria,volumetric and compressibility behaviour of binary and ternary aqueous solutions of 1-hexyl-3-methylimidazolium chloride,methyl potassium malonate,and ethyl potassium malonate

(Vapour + liquid) equilibrium data (water activity, vapour pressure, osmotic coefficient, and activity coefficient) of binary aqueous solutions of 1-hexyl-3-methylimidazolium chloride ([C₆mim][Cl]), methyl potassium malonate, and ethyl potassium malonate and ternary {[C₆mim][Cl] + methyl potassium malonate} and {[C₆mim][Cl] + ethyl potassium malonate} aqueous solutions were obtained through the isopiestic method at T = 298.15 K. These results reveal that the ionic liquid behaves as surfactant-like and aggregates in aqueous solutions at molality about 0.4 mol · kg⁻¹. The constant water activity lines of all the ternary systems investigated show small negative deviations from the linear isopiestic relation (Zdanovskii–Stokes–Robinson rule) derived using the semi-ideal hydration model. The density and speed of sound measurements were carried out on solutions of methyl potassium malonate and ethyl potassium malonate in water and of [C₆mim][Cl] in aqueous solutions of 0.25 mol · kg⁻¹ methyl potassium malonate and ethyl potassium malonate at T = (288.15 to 308.15) K at atmospheric pressure. From the experimental density and speed of sound data, the values of the apparent molar volume, apparent molar isentropic compressibility and excess molar volume were evaluated and from which the infinite dilution apparent molar volume and infinite dilution apparent molar isentropic compressibility were calculated at each temperature. Although, there are no clear differences between the values of the apparent molar volume of [C₆mim][Cl] in pure water and in methyl potassium malonate or ethyl potassium malonate aqueous solutions, however, the results show a positive transfer isentropic compressibility of [C₆mim][Cl] from pure water to the methyl potassium malonate or ethyl potassium malonate aqueous solutions. The results have been interpreted in terms of the solute–water and solute–solute interactions.     

Separation of toluene from alkanes using 1-ethyl-3-methylpyridinium ethylsulfate ionic liquid at T = 298.15 K and atmospheric pressure

In this paper, the separation of toluene from aliphatic hydrocarbons (heptane, or octane, or nonane) was analyzed by solvent extraction with 1-ethyl-3-methylpyridinium ethylsulfate ionic liquid, [EMpy][ESO₄]. Liquid?liquid equilibrium (LLE) data for the ternary systems {heptane (1) + toluene (2) + [EMpy][ESO₄] (3)}, {octane (1) + toluene (2) + [EMpy][ESO₄] (3)}, and {nonane (1) + toluene (2) + [EMpy][ESO₄] (3)} were obtained by measurements at T = 298.15 K and atmospheric pressure. The selectivity, % removal of aromatic, and solute distribution ratio, obtained from experimental equilibrium results, were used to determine the ability of [EMpy][ESO₄] as a solvent. The degree of consistency of the experimental LLE values was ascertained using the Othmer–Tobias and Hand equations. The experimental results for the ternary systems were correlated with the NRTL model. Finally, the results obtained were compared with other ionic liquids and other solvents.     

Pd-catalyzed asymmetric alternating co-polymerization of propene with carbon monoxide using ionic liquids

A protocol for Pd-catalyzed stereoselective co-polymerization of propene and carbon monoxide using chiral ligands, such as (2S,3S)-DIOP and (R)-P-Phos in [C₄mim][PF₆]/[C₆mim][PF₆] as an ionic liquid medium was developed. With (2S,3S)-DIOP as chiral ligand and [C₄mim][PF₆] as medium, the Pd-catalyzed co-polymerization of propene and CO gave almost completely regioregular polyketones, and the product polymer showed moderate stereoregularity (61% of ℓ-diads). The highest molar optical rotation = +15.9 and polydispersity = 1.2 were attained when (R)-P-Phos was used as the ligand and [C₆mim]PF₆ as the solvent. The co-polymer exhibited regioregularity of H–H/H–T/T–T (%) = 17:66:17.     

Solubilities of imidazolium-based ionic liquids in aqueous salt solutions at 298.15 K

The solubilities of ionic liquids in the ternary systems (ionic liquid + H₂O + inorganic salt) were reported at 298.15 K and atmospheric pressure. The examined ionic liquids are [C₄mim][PF₆] (1-n-butyl-3-methylimidazolium hexafluorophosphate), [C₈mim][PF₆] (1-n-octyl-3-methylimidazolium hexafluorophosphate), and [C₈mim][BF₄] (1-n-octyl-3-methylimidazolium tetrafluoroborate). The examined inorganic salts are the chloride-based salts (sodium chloride, lithium chloride, potassium chloride, and magnesium chloride) and the sodium-based salts (sodium thiocyanate, sodium nitrate, sodium trifluoroacetate, sodium bromide, sodium iodide, sodium perchlorate, sodium acetate, sodium hydroxide, sodium dihydrogen phosphate, sodium phosphate, sodium tetrafluoroborate, sodium sulfate, and sodium carbonate). The effects of the cations and the anions of the ionic liquids and of the inorganic salts on the solubility of the ionic liquids in the ternary solutions were systematically compared and discussed.     

Molar heat capacity and thermodynamic properties of 1-cyclohexene-1,2-dicarboxylic anhydride [C8H8O3]

The molar heat capacity C_p,m of 1-cyclohexene-1,2-dicarboxylic anhydride was measured in the temperature range from T=(80 to 360) K with a small sample automated adiabatic calorimeter. The melting point T_m, the molar enthalpy Δ_fusH_m and the entropy Δ_fusS_m of fusion for the compound were determined to be (343.46 ± 0.24) K, (11.88 ± 0.02) kJ · mol⁻¹ and (34.60 ± 0.06) J · K⁻¹ · mol⁻¹, respectively. The thermodynamic functions [H_(T)−H_(298.15)] and [S_(T)−S_(298.15)] were derived in the temperature range from T=(80 to 360) K with temperature interval of 5 K. The mass fraction purity of the sample used in the adiabatic calorimetric study was determined to be 0.9928 by using the fractional melting technique. The thermal stability of the compound was investigated by differential scanning calorimeter (DSC) and thermogravimetric (TG) technique, and the process of the mass-loss of the sample was due to the evaporation, instead of its thermal decomposition.     

Apparent molar heat capacities and apparent molar volumes of Pr(ClO4)3(aq), Gd(ClO4)3(aq), Ho(ClO4)3(aq), and Tm(ClO4)3(aq) at T=(288.15, 298.15, 313.15, and 328.15) K and p=0.1 MPa

Acidified aqueous solutions of Pr(ClO₄)₃(aq), Gd(ClO₄)₃(aq), Ho(ClO₄)₃(aq), and Tm(ClO₄)₃(aq) were prepared from the corresponding oxides by dissolution in dilute perchloric acid. Once characterized with respect to trivalent metal cation and acid content, the relative densities of the solutions were measured at T=(288.15, 298.15, 313.15, and 328.15) K and p=0.1 MPa using a Sodev O2D vibrating tube densimeter. The relative massic heat capacities of the aqueous systems were also determined, under the same temperature and pressure conditions, using a Picker Flow Microcalorimeter. All measurements were made on solutions containing rare earth salt in the concentration range 0.01 ⩽ m/(mol · kg⁻¹) ⩽ 0.2. Relative densities and relative massic heat capacities were used to calculate the apparent molar volumes and apparent molar heat capacities of the acidified salt solutions from which the apparent molar properties of the aqueous salt solutions were extracted by the application of Young's Rule. The concentration dependences of the isothermal apparent molar volumes and heat capacities of each aqueous salt solution were modelled using Pitzer ion-interaction equations. These models produced estimates of apparent molar volumes and apparent molar heat capacities at infinite dilution for each set of isothermal V_φ,2 and C_pφ,2 values. In addition, the temperature and concentration dependences of the apparent molar volumes and apparent molar heat capacities of the aqueous rare earth perchlorate salt solutions were modelled using modified Pitzer ion-interaction equations. The latter equations utilized the Helgeson, Kirkham, and Flowers equations of state to model the temperature dependences (at p=0.1 MPa) of apparent molar volumes and apparent molar heat capacities at infinite dilution. The results of the latter models were compared to those previously published in the literature.Apparent molar volumes and apparent heat capacities at infinite dilution for the trivalent metal cations Pr³⁺(aq), Gd³⁺(aq), Ho³⁺(aq), and Tm³⁺(aq) were calculated using the conventions V₂^∘(H⁺(aq)) ≡ 0 and C_p2^∘(H⁺(aq)) ≡ 0 and have been compared to other values reported in the literature.     

Thermodynamic studies of the ionic liquid 1-hexyl-3-methylimidazolium chloride [C6mim][Cl] in polyethylene glycol aqueous solutions

Vapour pressure osmometery (VPO) measurements at T = 308.15 K for {[C₆mim][Cl] + water}, {[C₆mim][Cl] + (0.005, 0.0155, and 0.0263) mol · kg⁻¹ PEG2000 + water} and {[C₆mim][Cl] + (0.0017, 0.0052, and 0.0088) mol · kg⁻¹ PEG6000 + water} systems and isopiestic measurements at T = 298.15 K for {[C₆mim][Cl] + PEG2000 + water} and {[C₆mim][Cl] + PEG6000 + water} systems have been carried out. The VPO measurements were carried out at very low concentrations of PEG and from which the values of the water activities, osmotic coefficients, vapour pressure and activity coefficients were obtained. The data obtained from the VPO method show that over the whole concentration range of the ionic liquid (IL), the activity coefficients of [C₆mim][Cl] in the presence of PEG2000 are increased. Although, at high IL concentrations, the values of the activity coefficient of [C₆mim][Cl] in the presence of PEG6000 are also increased, however for low concentrations of IL the values of the activity coefficient of [C₆mim][Cl] in pure water are larger than those in aqueous PEG6000 solutions. For a known IL concentration, the values of water activity coefficient for the binary {[C₆mim][Cl] + water} system are larger than those for the ternary {[C₆mim][Cl] + PEG + water} systems and decrease by increasing the concentration of PEG or decreasing the molar mass of PEG. The constant water activity lines of the all ternary systems obtained from the isopiestic method show positive deviation from the linear isopiestic relation (Zdanovskii–Stokes–Robinson rule) derived using the semi-ideal hydration model. The results have been interpreted in terms of the solute–water and solute–solute interactions.     

A theoretical study on the molecular structure and vibrational (FT-IR and Raman) spectra of a new organic–inorganic compound of 2[N(C3H7)4]SbCl4

The salt bis-tetrapropylammonium tetrachloroantimonate (III) is crystallized in the monoclinic system with the P2₁/c space group. The unit cell dimensions are: a = 18.1973(5) Å, b = 15.7225(4) Å, c = 13.6491(3) Å, β = 91.65(1)° and Z = 4. The vibrational spectra have been measured at room temperature by FT-infrared spectroscopy (4000–400 cm⁻¹) on polycrystalline samples, and by FT-Raman spectroscopy (3500–30 cm⁻¹) on monocrystals. The structure of the 2[N(C₃H₇)₄]SbCl₄ formed by two types of cations (C₃H₇)₄N⁺ and two types of anions [SbCl₄]⁻ was optimized by density functional theory (DFT) using the B3LYP method. Actually the values obtained by the B3LYP/LanL2MB basis with the aid of a calculation of the potential energy distribution (PED) are in good agreement with the experimental data. A root mean square (rms) difference value was calculated and the small differences between experimental and calculated modes have been interpreted by intermolecular interactions with-in the crystal. A comparison between the results of the 2[N(C₃H₇)₄]SbCl₄ compound and the simulated compounds based on the (CH₃)₄N⁺) and (C₂H₅)₄N⁺ fragments, shows an increase in the wavenumber of the bands assigned to the stretching vibration of the (NC) group for the 2[N(C₃H₇)₄]SbCl₄ compound. The comparison between the [N(C₃H₇)₄]Cl ligand and the 2[N(C₃H₇)₄]SbCl₄ compound of the infrared and Raman spectrum shows an increase in the wavenumber for the bands assigned to the stretching vibration of (CH₃) and the bending vibration of (NC₄) groups in the 2[N(C₃H₇)₄]SbCl₄ compound.     

Extraction of toluene from aliphatic compounds using an ionic liquid as solvent: Influence of the alkane on the (liquid + liquid) equilibrium

In this paper, the feasibility of using 1-ethyl-3-methylimidazolium ethylsulfate ionic liquid, [EMim][ESO₄], as solvent for the extraction of toluene from aliphatic compounds (hexane, heptane, octane, or nonane) was analyzed. (Liquid + liquid) equilibrium (LLE) data for the ternary systems {alkane (1) + toluene (2) + [EMim][ESO₄] (3)} were measured at T = 298.15 K and atmospheric pressure. Selectivity and solute distribution ratio were calculated from the experimental LLE data, and the obtained values were compared to those previously reported using other ionic liquids and sulfolane. The degree of consistency of the experimental LLE data was ascertained using the Othmer–Tobias equation. Finally, the experimental LLE data were satisfactorily correlated with NRTL and UNIQUAC models.