Excess enthalpy,density, and heat capacity for binary systems of alkylimidazolium-based ionic liquids + water

Experimental measurements of excess molar enthalpy, density, and isobaric molar heat capacity are presented for a set of binary systems ionic liquid + water as a function of temperature at atmospheric pressure. The studied ionic liquids are 1-butyl-3-methylpyridinium tetrafluoroborate, 1-ethyl-3-methylimidazolium ethylsulfate, 1-butyl-3-methylimidazolium methylsulfate, 1-butyl-3-methylimidazolium trifluoromethanesulfonate, and 1-ethyl-3-methylimidazolium trifluoromethanesulfonate. Excess molar enthalpy was measured at 303.15 K whereas density and heat capacity were determined within the temperature range (293.15 to 318.15) K. From experimental data, excess molar volume and excess molar isobaric heat capacity were calculated. The analysis of the excess properties reveals important differences between the studied ionic liquids which can be ascribed to their capability to form hydrogen bonds with water molecules.     

Heat capacities of the mixtures of ionic liquids with methanol at temperatures from 283.15 K to 323.15 K

The molar isobaric heat capacities of (methanol + 1-hexyl-3-methylimidazolium tetrafluoroborate) and (methanol + 1-methyl-3-octylimidazolium tetrafluoroborate) mixtures have been determined over the temperature range from 283.15 K to 323.15 K within the whole composition range. The excess molar heat capacities of investigated mixtures have been fitted to the Redlich–Kister equation at several selected temperatures. Positive deviations from the additivity of molar heat capacities have been observed in both examined systems. The results obtained have been discussed in terms of molecular interactions in binary mixtures.     

Densities and viscosities for ionic liquids mixtures containing [eOHmim][BF4], [bmim][BF4] and [bpy][BF4]

Densities and viscosities of binary ionic liquids mixtures, 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate ([eOHmim][BF₄]) + 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), 1-(2-hydroxyethyl)-3-methylimidazolium tetrafluoroborate ([eOHmim][BF₄]) + N-butylpyridinium tetrafluoroborate ([bpy][BF₄]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) + N-butylpyridinium tetrafluoroborate ([bpy][BF₄]) were measured over the entire mole fraction from T = (298.15 to 343.15) K. The excess molar volumes were calculated and correlated by Redlich–Kiser polynomial expansions. The viscosities for pure ionic liquids were analyzed by means of the Vogel–Tammann–Fulcher equation and ideal mixing rules were applied for the ILs mixtures.     

Liquid–liquid miscibility and volumetric properties of aqueous solutions of ionic liquids as a function of temperature

The volumetric properties of seven {water + ionic liquid} binary mixtures have been studied as a function of temperature from (293 to 343) K. The phase behaviour of the systems was first investigated using a nephelometric method and excess molar volumes were calculated from densities measured using an Anton Paar densimeter and fitted using a Redlich–Kister type equation. Two ionic liquids fully miscible with water (1-butyl-3-methylimidazolium tetrafluoroborate ([C₁C₄Im][BF₄]) and 1-ethyl-3-methylimidazolium ethylsulfate ([C₁C₂Im][EtSO₄])) and five ionic liquids only partially miscible with water (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₂Im][NTf₂]), 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₄Im][NTf₂]), 1-butyl-3-methylimidazolium hexafluorophosphate ([C₁C₄Im][PF₆]), 1-butyl-3-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C₁C₄Pyrro][NTf₂]), and butyltrimethylammonium bis(trifluoromethylsulfonyl)imide ([N₄₁₁₁][NTf₂])) were chosen. Small excess volumes (less than 0.5 cm³ · mol^?1 at 298 K) are obtained compared with the molar volumes of the pure components (less than 0.3% of the molar volume of the pure ionic liquid). For all the considered systems, except for {[C₁C₂Im][EtSO₄] + water}, positive excess molar volumes were calculated. Finally, an increase of the non-ideality character is observed for all the systems as temperature increases.     

Activity coefficients at infinite dilution of organic solutes in the ionic liquid 1-ethyl-3-methylimidazolium trifluoromethanesulfonate using gas–liquid chromatography at T = (313.15, 323.15, and 333.15) K

Activity coefficients at infinite dilution were determined for 24 solutes (n-alkanes, alk-1-enes, alk-1-ynes, cycloalkanes, alkylbenzenes, and alcohols) in the ionic liquid 1-ethyl-3-methylimidazolium trifluoromethanesulfonate by gas-liquid chromatography at three different temperatures T = (313.15, 323.15, 333.15) K. The partial molar excess enthalpy values at infinite dilution were calculated from the experimental results over the same temperature range. Selectivities and capacities at infinite dilution for the hexane/benzene and methanol/benzene separation problems were calculated from experimental infinite dilution activity coefficient values. The activity coefficients, enthalpies, selectivities, and capacities are discussed and compared to literature values for other ionic liquids, as well as industrial molecular solvents.     

(Vapor + liquid) equilibria of binary mixtures containing light alcohols and ionic liquids

This work presents (vapor + liquid) equilibrium (VLE) of binary mixtures containing methanol or ethanol and three imidazolium based ionic liquids: 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium acetate, and 1-butyl-3-methylimidazolium hydrogen sulfate. VLE measurements were carried out over the whole range of composition between (283.15 and 298.15) K using a static apparatus. Activity coefficients γ_i of these solvents in the ionic liquids have been determined from the VLE data and correlated using the NRTL model. The results show that the NRTL model can be applied successfully with systems containing ionic liquids.     

Volumetric properties,viscosities and refractive indices of binary liquid mixtures of tetrafluoroborate-based ionic liquids with methanol at several temperatures

Densities, speeds of sound, viscosities and refractive indices of two binary systems 1-butyl-3-methylimidazolium tetrafluoroborate [bmim][BF₄] + methanol and 1-ethyl-3-methylimidazolium tetrafluoroborate [emim][BF₄] + methanol, as well as of all pure components, have been measured covering the whole range of compositions at T = (278.15 to 318.15) K and p = 101 kPa. From this data, excess molar volumes, excess isentropic compressibilities, viscosity deviations and refractive index deviations were calculated and fitted to extended versions of the Redlich–Kister equation. Estimated coefficients of these equations taking into account the dependence on composition and temperature simultaneously were also presented.     

Density and viscosity of three (2,2,2-trifluoroethanol + 1-butyl-3-methylimidazolium) ionic liquid binary systems

Densities and viscosities were determined for binary mixtures of 2,2,2-trifluoroethanol (TFE) and 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) or 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([bmim][NTf₂]) over the entire range of composition. The experimental measurements were carried out at temperatures ranging from 278.15 K to 333.15 K, at atmospheric pressure. The densities and viscosities of the pure ionic liquids and their mixtures with TFE were described successfully by an empirical third-order polynomial and by the Vogel–Fulcher–Tammann equation, respectively. In addition, excess molar volumes and viscosity deviations were determined from densities and viscosities of mixtures, respectively, and fitted by using the Redlich–Kister equation.     

Electrolytic conductivity and molar heat capacity of two aqueous solutions of ionic liquids at room-temperature: Measurements and correlations

As part of our systematic study on physicochemical characterization of ionic liquids, in this work, we report new measurements of electrolytic conductivity and molar heat capacity for aqueous solutions of two 1-ethyl-3-methylimidazolium-based ionic liquids, namely: 1-ethyl-3-methylimidazolium dicyanamide and 1-ethyl-3-methylimidazolium 2-(2-methoxyethoxy) ethylsulfate, at normal atmospheric condition and for temperatures up to 353.2 K. The electrolytic conductivity and molar heat capacity were measured by a commercial conductivity meter and a differential scanning calorimeter (DSC), respectively. The estimated experimental uncertainties for the electrolytic conductivity and molar heat capacity measurements were ±1% and ±2%, respectively. The property data are reported as functions of temperature and composition. A modified empirical equation from another researcher [1] was used to correlate the temperature and composition dependence of the our electrolytic conductivity results. An excess molar heat capacity expression derived using a Redlich–Kister type equation was used to represent the temperature and composition dependence of the measured molar heat capacity and calculated excess molar heat capacity of the solvent systems considered. The correlations applied represent the our measurements satisfactorily as shown by an acceptable overall average deviation of 6.4% and 0.1%, respectively, for electrolytic conductivity and molar heat capacity.     

The thermochemistry of solvation of imidazolium-based ionic liquids in benzene

ABSTRACT

The present work is devoted to the thermochemical study of solvation of ionic liquids (IL) in benzene. The solution enthalpies of 1-ethyl-3-methylimidazolium tricyanomethanide [EMIM][C(CN)₃], 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF₆], 1-octyl-3-methylimidazolium tetrafluoroborate [OMIM][BF₄], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][TfO] in benzene were measured. The solvation enthalpies of imidazolium-based IL were calculated. Molar refractions of imidazolium-based IL form literature data on density and refractive indexes of IL were also calculated. The linear correlation between solvation enthalpy and molar refraction of IL was observed. This correlation can be used to calculate the vaporization enthalpy of imidazolium-based IL from solution calorimetry data.     

Heat capacities of the mixtures of ionic liquids with acetonitrile

Isobaric specific heat capacities were measured for {1-hexyl-3-methylimidazolium tetrafluoroborate (HMIMBF₄) + acetonitrile (MeCN)} and {1-methyl-3-octylimidazolium tetrafluoroborate (OMIMBF₄) + acetonitrile} within the whole range of composition and temperatures from (283.15 to 323.15) K. The excess molar heat capacities were calculated from the experimental results and satisfactorily fitted to Redlich–Kister type polynomials for several selected temperatures. Negative deviations from the additivity of molar heat capacities were observed within the whole composition range of (HMIBMF₄ + MeCN) and (OMIMBF₄ + MeCN). The results obtained have been interpreted in terms of interactions between ionic liquids and acetonitrile.     

Density and surface tension of pure ionic liquid 1-butyl-3-methyl-imidazolium l-lactate and its binary mixture with alcohol and water

The density and surface tension of the pure ionic liquid 1-butyl-3-methyl-imidazolium l-lactate were measured from T (293.15 to 343.15) K. The coefficient of thermal expansion, molecular volume, standard entropy, lattice energy, surface entropy, surface enthalpy, and enthalpy of vaporization were calculated from the experimental values. Density and surface tension were also determined for binary mixtures of {1-butyl-3-methyl-imidazolium l-lactate + water/alcohol (methanol, ethanol, and 1-butanol)} systems over the whole composition range from T (298.15 to 318.15) K at atmospheric pressure. The partial molar volume, excess partial molar volume and apparent molar volume of the component IL and alcohol/water in the binary mixtures were discussed as well as limiting properties at infinite dilution and the thermal expansion coefficients of the four binary mixtures. The surface properties of the four binary mixtures were also discussed.     

Activity coefficients at infinite dilution of organic solutes in the ionic liquid 1-butyl-3-methylimidazolium hexafluoroantimonate using gas–liquid chromatography at T = (313.15, 323.15, and 333.15) K

Activity coefficients at infinite dilution were determined for 27 solutes: n-alkanes, alk-1-enes, alk-1-ynes, cycloalkanes, alkylbenzenes, alcohols, and ketones in the ionic liquid 1-butyl-3-methylimidazolium hexafluoroantimonate, [BMIM][SbF₆], by gas–liquid chromatography at three different temperatures, T = (313.15, 323.15, and 333.15) K. The results are compared to published data on related compounds. The partial molar excess enthalpy values at infinite dilution were calculated from the experimental data over the same temperature range. Selectivities and capacities at infinite dilution were calculated for the hexane/benzene and methanol/benzene systems from experimental infinite dilution activity coefficients and compared to the literature values for related ionic liquids, as well as to data on industrial molecular solvents.     

Density,excess properties,electrical conductivity and viscosity of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide + γ-butyrolactone binary mixtures

Density, electrical conductivity and viscosity of binary liquid mixtures of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [bmim][NTf₂], with γ-butyrolactone (GBL) were measured at temperatures from (293.15 to 323.15) K and at atmospheric pressure over the whole composition range. Excess molar volumes have been calculated from the experimental densities and were fitted with Redlich–Kister polynomial equation. Other volumetric properties, such as isobaric thermal expansion coefficients, partial molar volumes, apparent molar volumes and partial molar volumes at infinite dilution have been also calculated, in order to obtain information about interactions between GBL and selected ionic liquid.     

Experimental methodology for precise determination of density of RTILs as a function of temperature and pressure using vibrating tube densimeters

A specific calibration procedure that allows the accurate determination of densities of room temperature ionic liquids, RTILs, as a function of temperature and pressure using vibrating tube densimeters is presented. This methodology overcomes the problems of common calibration methods when they are used to determine the densities of high density and high viscosity fluids such as RTILs. The methodology is applied for the precise density determination of RTILs 1-ethyl-3-methylimidazolium tetrafluoroborate [Emim][BF₄], 1-butyl-3-methylimidazolium tetrafluoroborate [Bmim][BF₄], 1-hexyl-3-methylimidazolium tetrafluoroborate [Hmim][BF₄], and 1-octyl-3-methylimidazolium tetrafluoroborate [Omim][BF₄] in the temperature and pressure intervals (283.15 to 323.15) K and (0.1 to 60) MPa, respectively. The viscosities of these substances, needed for the estimation of the viscosity-induced errors, were estimated at the same conditions from the experimental measurements in the intervals (283.15 to 323.15) K and (0.1 to 14) MPa and from a specific extrapolation procedure. The uncertainty in the density measurements was estimated in ±0.30 kg · m^?3 which is an excellent value in the working intervals. The results of these RTILs have demonstrated that viscosity-induced errors are relevant and they must be taken into account for a precise density determination. Finally, an alternative tool for a simpler application of this procedure is presented.     

Density and surface tension of pure 1-ethyl-3-methylimidazolium l-lactate ionic liquid and its binary mixtures with water

The density and surface tension of 1-ethyl-3-methylimidazolium l-lactate ([emim][l-lactate]) ionic liquid were determined from T = (283.15 to 333.15) K. The coefficients of thermal expansion were calculated from the experimental density results using an empirical correlation for T = (283.15 to 333.15) K. Molecular volume and standard entropies of the IL were calculated from the experimental density values. The surface properties of IL were investigated. The critical temperature and enthalpy of vaporization were also discussed. Density and surface tension have been measured over the whole composition range for {[emim][l-lactate] + water} binary systems at a temperature of 298.15 K and atmospheric pressure. Excess molar volumes V^E and the surface tension deviations δγ have been determined.     

Thermophysical properties of 1-propylpyridinium tetrafluoroborate

A systematic thermophysical characterization of the ionic liquid 1-propylpyridinium tetrafluoroborate has been developed. Thus, the density, speed of sound, refractive index, surface tension, viscosity, ionic conductivity, isobaric heat capacity have been determined over the temperature range (278.15 to 338.15) K. Moreover, thermal events have been investigated over the temperature range (120 to 320) K. A comparison between experimental results for the ionic liquid and 1-butylpyridinium tetrafluoroborate studied has been carried out to analyze carefully how the structural modifications in the cation influence the behavior of these compounds.     

Effect of temperature on the physical properties of 1-butyl-3-methylimidazolium based ionic liquids with thiocyanate and tetrafluoroborate anions,and 1-hexyl-3-methylimidazolium with tetrafluoroborate and hexafluorophosphate anions

The effect of temperature on the physical properties of some ionic liquids was investigated. Density, refractive index, surface tension, dynamic and kinematic viscosities of 1-butyl-3-methylimidazolium based ionic liquids with thiocyanate and tetrafluoroborate, and 1-hexyl-3-methylimidazolium with tetrafluoroborate and hexafluorophosphate anions were measured at various temperatures (density from T = (278.15 to 363.15) K, refractive index from (293.15 to 343.15) K, surface tension from (283.15 to 333.15) K, dynamic viscosity from (283.15 to 368.15) K, and kinematic viscosity from (298.15 to 363.15) K). The volumetric properties for the ionic liquids were also calculated from the experimental values of the density at T = 298.15 K. The Vogel–Fulcher–Tammann (VFT) equation was applied to correlate experimental values of dynamic and kinematic viscosities as a function of temperature. As well, the relation between density and refractive index was correlated satisfactorily with several empirical equations such as Lorentz–Lorenz, Dale–Gladstone, Eykman, Oster, Arago–Biot, Newton and Modified–Eykman. Finally, the relation between surface tension and viscosity was investigated and the parachor method was used to predict density, refractive index and surface tension of the ionic liquids.     

Osmotic and apparent molar properties of binary mixtures alcohol + 1-butyl-3-methylimidazolium trifluoromethanesulfonate ionic liquid

In this work, physical properties (densities and speeds of sound) for the binary systems {1-propanol, or 2-propanol, or 1-butanol, or 2-butanol, or 1-pentanol + 1-butyl-3-methylimidazolium trifluoromethanesulfonate} were experimentally measured from T = (293.15 to 323.15) K and at atmospheric pressure. These data were used to calculate the apparent molar volume and apparent molar isentropic compression which were fitted to a Redlich–Meyer type equation. This fit was used to obtain the corresponding apparent molar properties at infinite dilution. On the other hand, the osmotic and activity coefficients and vapor pressures of these binary mixtures were also determined at T = 323.15 K using the vapor pressure osmometry technique. The Extended Pitzer model of Archer was employed to correlate the experimental osmotic coefficients. From the parameters obtained in the correlation, the mean molal activity coefficients and the excess Gibbs free energy for the studied mixtures were calculated.     

Experimental measurements of mutual solubility of cyclohexanone,cyclohexene and ionic liquid

This work presents new experimental liquid–liquid equilibrium data for four ternary systems, containing cyclohexanone, cyclohexene and ionic liquids (1-butyl-3-methylimidazolium hexafluorophosphate, 1-butyl-3-methylimidazolium tetrafluoroborate, triethylammonium trifluoromethanesulfonate, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate) at temperature 296.15 K and at atmospheric pressure. Compositions of ternary liquid mixtures were determined using refractometric methods. It was shown that 1-ethyl-3-methylimidazolium trifluoromethanesulfonate and 1-butyl-3-methylimidazolium hexafluorophosphate containing imidazole cations can be considered as solvent for oxidation of cyclohexene to cyclohexanone.