Thermodynamic properties of CaTiF5(s)

Calcium titanofluoride CaTiF₅(s) was prepared by solid-state reaction of CaF₂(s) with TiF₃(s) and characterized by X-ray diffraction method. The standard molar isobaric heat capacity $(C_{p\text{,m}}^{\circ })$ of CaTiF₅(s) was determined by a power compensated differential scanning calorimeter in the temperature from 230 K to 710 K. A solid-state galvanic cell with CaF₂ as electrolyte was used to determine the standard molar Gibbs energy of formation $({\mathrm{\Delta }}_{\text{f}}{G}_{\text{m}}^{\circ })$ of CaTiF₅ in the temperature range from 803 K to 1005 K. The galvanic cell can be depicted as:$(-)\text{Pt,}{\text{O}}_2(\text{g,}101.325\text{kPa})/\{\text{CaO(s)}+{\text{CaF}}_2(\text{s})\}//{\text{CaF}}_2//\{{\text{CaTiF}}_5(\text{s})+{\text{CaTiO}}_3(\text{s})\}/{\text{O}}_2(\text{g,}101.325\text{kPa})\text{,Pt}(+)$The second law analysis of present data were carried out to derive the standard entropy $S_{\text{m}}^{\circ }(298.15\text{K})$ and the enthalpy of formation ${\mathrm{\Delta }}_{\text{f}}{H}_{\text{m}}^{\circ }(298.15\text{K})$ and the values derived are 68.7 J · K⁻¹ · mol⁻¹ and −2848.4 kJ · mol⁻¹, respectively.     

Partial molar volumes of organic solutes in water. XX. Glycine(aq) and l-alanine(aq) at temperatures (298 to 443) K and at pressures up to 30 MPa

Density data for dilute aqueous solutions of two amino acids (glycine, l-alanine) obtained using a flow vibrating-tube densimeter are presented together with partial molar volumes at infinite dilution (standard molar volumes, $V_{\text{m,}2}^{°}$) calculated from the measured data. The experiments were performed at temperatures from (298 up to 443) K at pressures close to the saturation line of water, at pressures in the range from (15 to 17) MPa, and at 30 MPa. Values of an analogue of isothermal compressibility, ${\kappa }_{T\text{,}2}^{°}=-(1/V_{\text{m,}2}^{°})(?V_{\text{m,}2}^{°}/?p{)}_T$, are also evaluated. Maxima on the curves $V_{\text{m,}2}^{°}(T)$ and ${\kappa }_{T\text{,}2}^{°}(T)$ are observed and discussed. The new data along with literature values of standard molar volumes and heat capacities are used for generating the recommended parameterization of an equation of state for standard molar thermodynamic properties of the aqueous amino acids.     

Phase relations in the system (chromium + rhodium + oxygen) and thermodynamic properties of CrRhO3

Phase relations in the system (chromium + rhodium + oxygen) at T = 1273 K have been determined by examination of equilibrated samples by optical and scanning electron microscopy, powder X-ray diffraction (XRD), and energy dispersive spectroscopy (EDS). Only one ternary oxide, CrRhO₃ with rhombohedral structure ($R\overline{3}$, a = 0.5031, and c = 1.3767 nm) has been identified. Alloys and the intermetallics along the (chromium + rhodium) binary were in equilibrium with Cr₂O₃. The thermodynamic properties of the CrRhO₃ have been determined in the temperature range (900 to 1300) K by using a solid-state electrochemical cell incorporating calcia-stabilized zirconia as the electrolyte. For the reaction,$\begin{array}{cc}\hfill & 1/2{\text{Cr}}_2{\text{O}}_3(\text{solid})+1/2{\text{Rh}}_2{\text{O}}_3(\text{solid})\to {\text{CrRhO}}_3(\text{solid})\text{,}\hfill \\ \hfill & \mathrm{\Delta }{G}^{°}\pm 140/(\text{J}·{\text{mol}}^{-1})=-31967+5.418(T/\text{K})\text{,}\hfill \end{array}$where Cr₂O₃ has the corundum structure and Rh₂O₃ has the orthorhombic structure. Thermodynamic properties of CrRhO₃ at T = 298.15 K have been evaluated. The compound decomposes on heating to a mixture of Cr₂O₃-rich sesquioxide solid solution, Rh, and O₂. The calculated decomposition temperatures are T = 1567 ± 5 K in pure O₂ and T = 1470 ± 5 K in air at a total pressure p^° = 0.1 MPa. The temperature-composition phase diagrams for the system (chromium + rhodium + oxygen) at different partial pressures of oxygen and an oxygen potential diagram at T = 1273 K are calculated from the thermodynamic information.