HDPE solution crystallization induced by electrospun PA66 nanofiber

Nanohybrid shish?Ckebab (NHSK), induced by polyamide 66 (PA66) nanofiber, was successfully fabricated in high-density polyethylene (HDPE)/xylene solution via isothermal crystallization. The crystalline morphological features of NHSK were observed by scanning electron microscopy. In the structure of NHSK, PA66 nanofiber serves as shish and HDPE lamellae act as kebabs periodically surrounding the nanofiber. Additionally, it reveals that both HDPE solution concentration and crystallization time have significant effects on the size of HDPE kebab. That is, as the concentration and crystallization time increase, the diameter of the kebab increases. Moreover, when crystallization time further increases, the crystals decorated on PA66 nanofiber exhibit a three-dimensional growth (i.e., aggregate of crystallites) rather than a two-dimensional one (i.e., disk-like lamellae normal to the axis of nanofiber).     

Polymer crystallization-driven, periodic patterning on carbon nanotubes

We report herein a unique means to periodically pattern polymeric materials on individual carbon nanotubes (CNTs) using a controlled polymer crystallization method. One-dimensional (1D) CNTs were periodically decorated with polymer lamellar crystals, resulting in nano-hybrid shish-kebab (NHSK) structures. The periodicity of the polymer lamellae varies from 20 to 150 nm. The kebabs are approximately 5-10 nm thick (along CNT direction) with a lateral size of approximately 20 nm to micrometers, which can be readily controlled by varying crystallization conditions. Both polyethylene and Nylon 66 were successfully decorated on single-walled carbon nanotubes (SWNTs), multiwalled carbon nanotubes (MWNTs), as well as vapor grown carbon nanofibers (CNFs). The formation mechanism was attributed to "size-dependent soft epitaxy". Because NHSK formation conditions depend on CNT structures, it further provides a unique opportunity for CNT separation. The reported method opens a gateway to periodically patterning polymers and different functional groups on individual CNTs in an ordered and controlled manner, an attractive research field that is yet to be explored.     

Properties of meso-tetrakis (4- n -alkanoyloxyphenyl) porphyrin liquid crystal Co and Ni complexes

Six series of meso-tetrakis (4-n-alkanoyloxyphenyl) porphyrin Co and Ni complexes (12 kinds) were reported. Nine of the compounds were found to exhibit liquid crystal properties and display a hexagonal columnar discotic columnar (Col_h) phase. Molecular structure of all synthesized compounds was confirmed by IR, UV, MS, ¹H NIVR, and elemental analysis. These liquid crystalline compounds have been studied by cyclic voltammetry, luminescence, and surface photovoltage spectroscopy. Supported by the National Natural Science Foundation of China (Grant No. 59783001), the Natural Science Foundation of Shandong Province (Grant No. Y2006B41), the Foundation of Shandong Provincial Education Department (Grant No. J06A53), the Natural Science Foundation of Shandong University of Technology (Grant No. 2004KJM15) and Doctor Foundation of Shandong University of Technology     

Supercritical CO2-driven, periodic patterning on one-dimensionals carbon nanomaterials

One-dimensional carbon nano-materials, in particular carbon nanotubes (CNTs) and carbon nanofibers (CNFs), are of scientific and technological interest due to their satisfactory properties and ability to serve as templates for directed assembly. In this work, linear high density polyethylene (PE) was periodically decorated on CNTs and CNFs using a supercritical carbon dioxide (scCO₂)antisolvent-induced polymer epitaxy (SAIPE) method, leading to nano-hybrid shish-kebab (NHSK) structures. The formation mechanism of different morphologies of PE lamellae on CNTs and CNFs has been discussed. Palladium nanoparticles were synthesized and immobilized on the PE/CNF NHSK structure with the assistance of scCO₂. The obtained hierarchical nano-hybrid architecture may find applications in microfabrication and other related fields.     

Chiral assembly of achiral pseudoisocyanine with D- and L-phenylalanine

Supramolecular chirality and molecular self-assembly are important and interesting phenomena in living and non-living systems.In this work,supramolecular chirality of achiral pseudoisocyanine(PIC) J-aggregates was successfully induced by D-,L-phenylalanine(Phe) and other amino acids in NaCl solution.The chiral J-aggregates showed a characteristic,induced circular dichroism(ICD) in the visible region of J-band chromophore which depends on the absolute configuration,concentration and side groups of α-amino ac...     

Honeycomb-patterned films of polystyrene/poly(ethylene glycol): preparation,surface aggregation and protein adsorption

Highly ordered honeycomb-patterned polystyrene (PS)/poly(ethylene glycol) (PEG) films were prepared by a water-assisted method using an improved setup, which facilitated the formation of films with higher regularity, better reproducibility, and larger area of honeycomb structures. Surface aggregation of hydrophilic PEG and adsorption of bovine serum albumin (BSA) on the honeycomb-patterned films were investigated. Field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM) were used to observe the surface morphologies of the films before and after being rinsed with water. As confirmed by the FESEM images and the AFM phase images, PEG was enriched in the pores and could be gradually removed by water. The adsorption of fluorescence-labeled BSA on the films was studied in visual form using laser scanning confocal microscopy. Results clearly demonstrated that the protein-resistant PEG was selectively enriched in the pores. This water-assisted method may be a latent tool to prepare honeycomb-patterned biofunctional surfaces. Supported by the National Natural Science Foundation of China (Grant No. 50803053), the National Natural Science Foundation of China for Distinguished Young Scholars (Grant No. 50625309), the National Postdoctoral Science Foundation of China (Grant Nos. 20070421172 & 20081466) and the National Undergraduate Innovative Test Program     

The mobility of PEG chains versus micellar stability towards the formation of PE‐b‐PEG nanohybrid shish‐kebab on carbon nanotubes

A comparative study of the effect of copolymer composition on nanohybrid shish‐kebab (NHSK) architecture on carbon nanotubes (CNTs) is presented. A semi‐crystalline amphiphilic di‐block copolymer, polyethylene‐b‐polyethylene glycol (PE‐b‐PEG) was used in this study. Copolymer composition was varied on the basis of the molecular weight of individual copolymers and the ratio between PE and PEG. NHSK structure was characterized using a combination of scanning and transmission electron microscopy. The mobility of PEG, which is determined by its chain length was found to have a significant impact on the periodic decoration of the copolymer on CNTs. With higher chain length or molecular weight, PEG chains provided better stability to micelles formed by the copolymer. Further, PEG assisted micellar stability to create a foundation for PE chains to interact and orient along the tube axis of CNTs as a function of the copolymer composition. It was found that the stability of NHSK architecture can also be changed over time at the same crystallization temperature. This work offers novel and fundamental insights towards the mobility of PEG in the copolymer and its disk‐shaped crystal's formation and micellar stability during crystallization with CNTs. This study provides a better understanding of a mechanically tunable NHSK where the architecture of copolymer crystals can be modified by adjusting the molecular weight of PEG.     

RETRACTED ARTICLE: Microenvironment characterization for a novel biocompatible hybrid carbon-silicon material

The compatible carbon-silicon complex materials originated from precursor diglycerylsilane (DGS) and sugar-modified silane N-(3-triethoxysilylpropyl)gluconamide (GLS) have gained substantial popularity by demonstrating admirable properties to stabilize entrapped biomolecules. The microenvironment inside these materials, especially the distribution of sugar moieties inside the matrix, which is likely the most critical factor determining compatibility of these materials, still remains unclear. To deeply investigate the biocompatibility mechanism of these materials, we have adopted two different preparation routes for these materials by introducing GLS into the starting DGS sol stage, but things are different after the DGS gel is formed. A fluorescence probe rhodamine 6G is introduced herein in the DGS sol to monitor the distribution of GLS moieties, as well as the evolution of the microenvironment inside resulting materials. All in all, the findings demonstrated that the timing of GLS addition plays a critical role in controlling the evolution of the inner structure of materials, suggesting that this factor provides a promising route to tune the properties of the resulting materials. Supported by the National Natural Science Foundation of China (Grant No. 20876176), Scientific Research Foundation for the Returned Overseas Chinese Scholars by the State Education Ministry, Key Project of Chinese Ministry of Education (Grant No. 109100), Doctoral Project of Shandong Province (Grant No. 2008BS09013), Research Foundation of Key Laboratory of Carbon Materials, Institute of Coal Chemistry, CAS (Grant No. KFJJ0506), and Natural Science Foundation of Shandong Province (Grant No. Q2007B02)     

Molecular design of organic dyes based on vinylene hexylthiophene bridge for dye-sensitized solar cells

Three donor-(π-spacer)-acceptor (D-π-A) organic dyes, containing different groups (triphenylamine, di(p-tolyl)phenylamine, and 9-octylcarbazole moieties) as electron donors, were designed and synthesized. Nanocrystalline TiO₂ dye-sensitized solar cells were fabricated by using these dyes. It was found that the variation of electron donors in the D-π-A dyes played an important role in modifying and tuning photophysical properties of organic dyes. Under standard global AM 1.5 solar condition, the DSSC based on the dye D2 showed the best photovoltaic performance: a short-circuit photocurrent density (J _sc ) of 13.93 mA/cm², an open-circuit photovoltage (V _oc ) of 0.71 V, and a fill factor (FF) of 0.679, corresponding to solar-to-electric power conversion efficiency (η) of 6.72%. Supported by the Key Project of Hunan Province of China (Grant No. 2008FJ2004), Natural Science Foundation of Hunan Province of China (Grant Nos. 09JJ3020 & 09JJ4005), and Scientific Research Fund of Hunan Provincial Education Department (Grant No. 08C888).     

聚丙烯/高密度聚乙烯高取向共混物的附生结晶

<正> 最近,聚合物之间的附生结晶引起人们的极大兴趣和关注。附生结晶是一种结晶物质在另一种结晶物质上的取向生长,二者之间有特殊的作用。这种附生作用对结晶聚合物共混体系的形态结构和性能有极为重要的影响。本工作以电子显微镜方法研究熔体拉伸直接导致等规聚丙烯(iPP)和高密度聚乙烯(HDPE)共混物附生结晶。     

A dynamical Lie algebraic mehtod for quantum reactive scattering

Ｒａｐｉｄｐｒｏｇｒｅｓｓｉｎｔｈｅｔｈｅｏｒｙｏｆｑｕａｎｔｕｍｒｅａｃｔｉｖｅｓｃａｔｔｅｒｉｎｇｈａｓｂｅｅｎｍａｄｅｉｎｔｈｅｐａｓｔｆｅｗｙｅａｒｓ.Ａｓａｒｅｓｕｌｔｏｆｔｈｅｐｒｏｇｒｅｓｓｏｎｅｃａｎｎｏｗｃａｌｃｕｌａｔｅｅｘａｃｔｓｔａｔｅ＿ｔｏｓｔａｔｅｒｅａｃｔｉｏｎｃｒｏｓｓｓｅｃｔｉｏｎｓｆｏｒａｆｅｗｆｕｎｄａｍｅｎｔａｌｒｅａｃｔｉｏｎｓ.Ａｍｏｎｇｖａｒｉｏｕｓｆｏｒｍｕｌａｔｉｏｎｓｏｆｔｈｅｔｈｅｏｒｅｔｉｃａｌａｐｐｒｏａｃｈ,ｔｈｅＳｍａｔｒｉｘＫｏｈｎｖ…     

The hydrogen sulfate recognition properties of azo-salicylaldehyde schiff base receptors

Azo-salicylaldehyde Schiff base-typed receptors containing an acidic H-bond donor moiety were syn-thesized and characterized. The UV-Vis data indicate that these receptors could act as selective col-orimetric sensors for basic anions and acidic species hydrogen sulfate by different color changes in a water-containing medium. The experiment of Brφnsted acid-base reaction by adding the sodium hy-droxide or perchloric acid revealed that the mechanism of recognition of anions might be deprotona-tion/protonation of the OH fragments by interacting with different anions and that the deprotona-tion/protonation process is fully reversible. The deprotonation/protonation of the receptors is respon-sible for the dramatic color change.     

Facile synthesis of small crystal ZSM-5 zeolite by acid-catalyzed hydrolysis of tetraethylorthosilicate

Small crystal zeolites ZSM-5 with sizes of 150–300 nm were synthesized using the colloidal silicate precursors as the silica source created by the acid-catalyzed hydrolysis of tetraethylorthosilicate with tetrapropylammonium bromide as the structure-directing agent within a short crystallization time of 20–35 h. The precursors and final products were detected by XRD, SEM, ICP and DLS. Supported by the National Natural Science Foundation of China (Grant No. 20776069), Key Natural Science Foundation for Universities of Jiangsu Province (Grant No. 06KJA53012), and Program for Changjiang Scholars and Innovative Research Team in University (Grant No. PCSIRT 0732)     

Synthesis and structures of two supramolecular complexes constructed via hydrogen bond linking

Two supramolecular complexes,[Ni(rac-L)]3[CrO4]2[ClO4]2-4H2O (1) and [meso-H2L]0.5[VO3]-0.16H2O (2) (L= 5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetra-decane),have been prepared in an aqueous solu-tion,and detected by elemental analysis,IR,TG,and single crystal X-ray diffraction analyses. Com-pound 1 shows a one-dimensional hexagonal prism formed by the hydrogen bonding interactions between the secondary amines of rac-L and CrO42-anion/water molecules. Compound 2 displays a three-dimensional structur...     

Synthesis of Fréchet-type dendritic homotriptycenes

A rapid and efficient synthesis of novel dendrimer homotriptycenes is presented. The dendronized 9,10-dihydroanthracen-9-ols 4, having high electron densities in the benzene rings of the Fréchet-type dendrons, exhibited in the presence of acid a quantitative transannular ring closure to the corresponding dendritic homotriptycenes. The electron-donating Fréchet-type dendrons enabled the intramolecular FC alkylation by a regioselective 1,7-elimination of H2O.     

DNA-modified electrodes (VII)

Two kinds of DNA-modified electrodes were prepared by covalent and adsorptive immobilization of DNA onto self-assembled monolayers of 2, 2’-dithiodiethanol on gold electrodes and characterized by cyclic voltammetry, X-ray photoelectron spectroscopy and scanning tunneling microscopy. The results suggest that the methods are satisfactory for the immobilization of DNA on electrodes. Project supported by the National Natural Science Foundation of China (Grant Nos. 39370213; 39770220; 29773034), State Key Laboratory for Physical Chemistry of Solid Surfaces (Xiamen University), and Natural Science Foundation of Hubei Province (Grant NO. 96J037).     

Epitaxial behavior of HDPE on the boundary of highly oriented iPP substrates

The epitaxial crystallization behavior of high-density polyethylene on the boundary of highly oriented isotactic polypropylene (iPP) substrates has been investigated by means of atomic force microscopy (AFM) and transmission electron microscopy (TEM). The results obtained from AFM and TEM indicate that the epitaxial nucleation of HDPE on the highly oriented iPP substrates occurs earlier than that in the pure HDPE phase, i.e., homogeneous nucleation. Therefore the epitaxially grown HDPE lamellae can grow across the boundary of the iPP substrate into the HDPE spherulitic phase with the epitaxial orientation relationship remaining.     

Photoelectrocatalytic oxidation of GMP on an ITO electrode modified with clay/[Ru(phen)<Subscript>2</Subscript>(dC18bpy)]<Superscript>2+</Superscript> hybrid film

An indium tin oxide (ITO) electrode modified with monolayer clay/[Ru(phen)₂(dC18bpy)]²⁺ (phen=1,10-phenanthroline, dC18bpy = 4,4′-dioctadecyl-2,2′ bipyridyl) hybrid film has been fabricated by the Langmuir-Blodgett (LB) method. Atomic force microscopy revealed that the single-layered hybrid film of clay/[Ru(phen)₂(dC18bpy)]²⁺ (denoted as Clay-Ru) was closely packed at a surface pressure of 25 mN·m⁻¹ and had a thickness of 3.4±0.5 nm. Cyclic voltammograms showed that the redox current of Ru(II) complex decreased when incorporated into the clay film, suggesting that the clay layer acts as a barrier against electron transfer. When applied to oxidizing the mononucleotide of guanosine 5′-monophosphate (GMP), a large catalytic oxidative current was achieved on the Clay-Ru(II) modified ITO electrode at the external potential above 900 mV (vs. Ag|AgCl|KCl) and, more significantly, this response was further enhanced by light irradiation (λ>360 nm), in which the photocurrent is increased about 11 times in comparison with that of a bare ITO. Mechanism of the photoelectrocatalytic effect was proposed in terms of the reduction of the photoelectrochemically generated Ru(III) complex in the Clay-Ru film by GMP. Supported by the National Natural Science Foundation of China (Grant Nos. 20471043 and 20843007), Zhejiang Provincial Natural Science Foundation (Grant Nos. Y404118 and Y408177), the “151” Distinguished Person Foundation of Zheji-ang Province of China, Zhejiang Technology Project Foundation (Grant No. 2007C21134) and Wenzhou Technology Project Foundation (Grant No. N2004B040)     

Surface chemistry of nanoscale Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> dispersed in magnetic fluids

The interaction between stabilizers and nanoparticles is one of the important factors to prepare stable magnetic fluids. The magnetic nano-size Fe₃O₄ core with single domain and the average grain size around 8–12 nm were prepared by chemical precipitation method. The O/Fe molar ratio of the particle surface was measured by X-ray photoelectron spectroscopy (XPS). The heat effects of stabilizers adsorption on nanoparticles were measured by solution calorimetry. The excess amount of oxygen was possibly the result of the hydroxygen formed on the surface of the nanoparticles. The heat effects showed that compounds containing carboxyl groups can be adsorbed chemically on magnetite by forming chemical bonds. The other stabilizers involving NH-groups, such as polyethylene-imine, can be adsorbed physically. The exothermic value is about half of the former case. Supported by the National Natural Science Foundation of China (Grant No. 50476039), and Guangdong Provincial Department of Science and Technology (Grant No. 2004A10-703001)     

Synthesis,structure and nonlinear optical properties of two novel two-photon absorption chromophores

Two triphenylamine-based derivatives that can be used as two-photon absorption chromophore,tris{4-[4-(3-trifluoromethyl-3-oxopanoyl)]phenyl}amine (1) and tris{4-[4-(3-phenyl-3-oxopanoyl)] phenyl} amine (2) were successfully synthesized and fully characterized by elemental analysis,IR,1H NMR and MS. The single crystal X-ray diffraction analysis showed that the molecules possess D-(π-A)3 structures. One-and two-photon absorption and fluorescence in various solvents were experimentally investigated. A data rec...