迭代Suzuki偶联反应合成全氟环丁基芳基醚齐聚物的研究

对迭代Suzuki偶联反应合成全氟环丁基芳基醚齐聚物的方法进行了研究, 并合成了全氟环丁基芳基醚齐聚物. 首先从对溴苯酚出发, 合成了含有一个全氟环丁基芳基醚结构单元的中间体3. 芳基硼酸与中间体3进行Suzuki偶联反应, 得到了含有一个全氟环丁基芳基醚结构单元的硼酸. 重复与中间体3进行Suzuki偶联反应, 从而合成了全氟环丁基芳基醚二聚体和三聚体. 最后通过热环化二聚反应合成了全氟环丁基芳基醚三聚体、五聚体和七聚体.     

Rhodium‐Catalyzed Transnitrilation of Aryl Boronic Acids with Dimethylmalononitrile

An efficient transnitrilation of aryl boronic acids with dimethylmalononitrile (DMMN) is described. This rhodium‐catalyzed electrophilic cyanation presents a novel approach to prepare aryl nitriles by using a carbon‐bound cyanating reagent which undergoes cross‐coupling with the aryl boronic acid. The reaction expands the degree of functional‐group compatibility exhibited by the transnitrilation of aryl Grignard and aryllithium reagents. A variety of aryl boronic acid derivatives and dialkylmalononitriles were amenable to the transnitrilation.     

Lithium aminoborohydrides 17. Palladium catalyzed borylation of aryl iodides, bromides, and triflates with diisopropylaminoborane prepared from lithium diisopropylaminoborohydride

The Alcaraz-Vaultier borylation of aryl halides and triflates is reported utilizing diisopropylaminoborane (BH₂N(ⁱPr)₂) prepared from the corresponding lithium aminoborohydride (LAB reagent). BH₂N(ⁱPr)₂, prepared by reacting lithium diisopropylaminoborohydride with trimethylsilyl chloride, provided the most consistent isolated yields from this reaction. Catalytic amounts of palladium dichloride produced the highest yields from aryl iodides, while catalytic tris(dibenzylideneacetone)dipalladium(chloroform) provided the best yields for aryl bromides and triflates. This route to boronic acids is mild enough to tolerate various functionalities and for the first time employs aryl triflates as substrates for the Alcaraz-Vaultier borylation. In addition, it was found that both boronic acid and ester compounds could be isolated from the reaction mixture utilizing simple work-up procedures. Treatment of the reaction intermediate with an acid/base work-up provided the corresponding boronic acid, while treating the same intermediate with a diol, such as neopentyl glycol, afforded the corresponding boronic ester.     

Copper(II)-mediated o-arylation of 3-hydroxy-2-oxindoles with boronic acids at room temperature

Synthesis of 3-aryloxy-2-oxindole derivatives from 3-hydroxy-2-oxindoles and aryl boronic acids through copper(II)-promoted reaction is achieved. This reaction provides an efficient protocol for the coupling between aryl boronic acid and tertiary aliphatic alcohol, opening a new avenue to format corresponding 3-phenyl-3-aryloxy-2-oxindole core, which has potentially value in the field of life-science.     

Study on the Regioselectivity of Rhodium-Catalyzed Ring Opening Reactions of C1-Substituted 7-Oxabenzonorbornadienes with Boronic Acids

An optimized condition for the rhodium-catalyzed ring-opening reaction of C₁-substituted oxabicyclic alkenes with aryl boronic acids was developed and the effect of aryl boronic acid as well as the effect of C₁ substitution on the oxabicyclic alkenes was studied. Aryl boronic acids carrying electron-donating substituents provided the ring-opened products in excellent yields regardless of the position, while electron-withdrawing substituents were more susceptible to steric interactions. Although two different regioisomers are possible, all the rhodium-catalyzed ring-opening reactions of C₁ substituted oxabicyclic alkenes studied with aryl boronic acids were found to be highly regioselective, giving single regioisomers in all cases.     

Chemoselective Boronic Ester Synthesis by Controlled Speciation

Control of boronic acid solution speciation is presented as a new strategy for the chemoselective synthesis of boronic esters. Manipulation of the solution equilibria within a cross‐coupling milieu enables the formal homologation of aryl and alkenyl boronic acid pinacol esters. The generation of a new, reactive boronic ester in the presence of an active palladium catalyst also facilitates streamlined iterative catalytic C? C bond formation and provides a method for the controlled oligomerization of sp²‐hybridized boronic esters.     

Heck-type coupling vs. conjugate addition in phosphine-rhodium catalyzed reactions of aryl boronic acids with alpha,beta-unsaturated carbonyl compounds: a systematic investigation

The competition between Heck-type coupling and conjugate addition in phosphine-rhodium catalyzed reactions of aryl boronic acids with alpha,beta-unsaturated carbonyls has been systematically investigated in a toluene-H(2)O biphasic system. Aside from the intrinsic nature of rhodium and the enolization of carbonyls, the phosphine supporting ligand on rhodium, the ratio of aryl boronic acid to alpha,beta-unsaturated carbonyl and the pH value of the aqueous phase were found to affect the competition significantly. Highly selective rhodium-based catalyst systems have therefore been developed for both Heck-type coupling and conjugate addition by synergistically tuning the supporting ligand, the boronic acid to olefin ratio and other reaction conditions. Conjugate addition with selectivity >99% and Heck-type coupling with selectivity of up to 100%, 98% and 84% for acrylates, acrylamides and methyl vinyl ketone, respectively, could be achieved in the rhodium-catalyzed reactions of aryl boronic acids with alpha,beta-unsaturated carbonyls using the corresponding optimized rhodium-based catalyst systems.     

Oxidative cross-coupling of allyl(trimethyl)silanes with aryl boronic acids by palladium catalysis

The first oxidative cross-coupling of allylsilanes with aryl boronic acids has been developed by palladium catalysis. The reaction between β-substituted allyl(trimethyl)silanes and a wide range of aryl boronic acids afforded allylarenes in moderate to good yields and excellent selectivity. On the basis of experimental results and literature reports, it was suggested that the reaction might start from transmetalation of aryl boronic acid with AgOAc followed by transmetalation with Pd(II) to give an arylpalladium acetate complex as a key intermediate. This intermediate underwent either electrophilic addition/desilylation or transmetalation with allylsilane and subsequent reductive elimination to give the final product.     

Palladium-catalyzed site-selective arylation of symmetric dichlorobenzaldehyde to non-symmetric diaryl benzaldehyde via Suzuki coupling

Arylation of 2,6-dichlorobenzaldehyde by aryl boronic acids via site-selective Suzuki coupling catalyzed by PdCl₂ supported on 4 Å molecular sieves produces 2-aryl-6-chlorobenzaldehyde which on subsequent coupling with a different aryl boronic acid in the presence of Pd(OAc)₂–NHC ligand leads to non-symmetric diaryl benzaldehyde in good overall yield.     

Suzuki aryl cross-coupling chemistry using derivatives of 1,1,2,2,9,9,10,10-octafluoro[2.2]paracyclophane

An exploration into the scope of Suzuki aryl cross-coupling chemistry using derivatives of 1,1,2,2,9,9,10,10-octafluoro[2.2]paracyclophane is reported. The coupling of 4-iodo-1,1,2,2,9,9,10,10-octafluoro[2.2]paracyclophane with various aryl boronic acids and boronic acid pinacol esters was successful, with the exception of very sterically demanding systems, such as mesityl. The synthesis of the previously unreported 1,1,2,2,9,9,10,10-octafluoro[2.2]paracyclophanyl-4-boronic acid is described, together with various Suzuki aryl cross-coupling reactions of this new system. Using standard Suzuki methodology, it was possible to prepare dicyclophanes bearing two octafluoro[2.2]paracyclophane units separated by both one and two benzene rings.     

General and highly efficient fluorinated-N-heterocyclic carbene–based catalysts for the palladium-catalyzed Suzuki–Miyaura reaction

A general and highly efficient trifluoromethylated-N-heterocyclic carbene (NHC)-based catalyst for the palladium-catalyzed Suzuki–Miyaura reaction was reported. In the presence of the catalyst, reactions of non-activated aryl chlorides and triflates with aryl boronic acids occurred at room temperature with good to excellent yields (63–98%). In addition, catalysts generated from a combination of Pd(OAc)₂/imidazolium salt 6a is not only effective for the coupling of heteroaryl boronic acid with aryl halides and heteroaryl halides, but also efficient for coupling of other heteroaryl halides and heteroaryl boronic acids. Finally, the catalyst is highly effective for Suzuki–Miyaura reaction of aryl bromides and chlorides with 0.01–0.1 mol % loading if the temperature was raised at refluxed THF/H₂O.     

Efficient imidazolium salts for palladium-catalyzed Mizoroki-Heck and Suzuki-Miyaura cross-coupling reactions

The system, Pd(OAc)2/imidazolium salts (L2), was found as an efficient catalyst in the Heck coupling reaction of olefins with aryl halides and Suzuki reactions of various aryl halides with aryl boronic acids under aerobic condition. This catalytic system demonstrates great tolerance to a wide range of groups on all substrates of aryl halides, alkenes and aryl boronic acids.     

The palladium-catalyzed cross-coupling reactions of trifluoroethyl iodide with aryl and heteroaryl boronic acid esters

The cross-coupling reactions of 1,1,1-trifluoro-2-iodoethane with aryl and heteroaryl boronic acid esters have been successfully achieved. The new protocol allows for a convenient introduction of trifluoroethyl groups into a variety of aryl and heteroaryl moieties under mild conditions.     

CuI-catalyzed direct synthesis of diaryl thioethers from aryl boronic acids and arylsulfonyl chlorides

A CuI-catalyzed direct coupling of aryl boronic acids with arylsulfonyl chlorides for the preparation of diaryl thioethers was developed. The reaction is initiated by a PPh₃ reduction of the arylsulfonyl chloride, followed by a CuI-catalyzed C–S coupling with an aryl boronic acid. Various arylsulfonyl chlorides can directly serve as a sulfur source in this mild and efficient reaction giving the desired products in moderate to good yields. Moreover, this practical method has also been applied to the thioetherification of aryl iodides and acetylacetones.     

Total synthesis of dehydroaltenusin

The first total synthesis of dehydroaltenusin, a natural enzyme inhibitor, is described. The key step involves Suzuki-coupling reaction of an aryl triflate prepared from 2,4,6-trihydroxybenzoic acid with a catechol-derived boronic acid or boronic ester. The synthetic product was evaluated as a potent inhibitor against eukaryotic DNA polymerase α and other DNA polymerases.     

Zirconium-catalyzed Nagata reaction for the synthesis of 2-aryl-1,3,2-aryldioxaborins via a mild three-component condensation of phenols, aldehydes, and boronic acid

An efficient ZrCl₄-catalyzed ortho-hydroxyalkylation of phenols with aldehydes promoted by 3,5-bis(trifluoromethyl)phenyl boronic acid, leading to the formation of 2-aryl-1,3,2-aryldioxaborins, was investigated and optimized. The reaction afforded the desired aryldioxaborins in good to excellent yields under mild conditions at room temperature. The electron-deficient boronic acid promoter was essential. Electron-rich phenols react faster, and both alkyl and aryl aldehydes are suitable substrates. The resulting aryldioxaborins can be further elaborated to produce substituted saligenols, 2-ethoxy chromans, and 2-substituted phenols.     

Efforts directed toward the synthesis of colchicine: application of palladium-catalyzed siloxane cross-coupling methodology

[reaction: see text] Colchicine is an important and synthetically challenging natural product. The key synthetic step in this approach to the synthesis of colchicine involved a palladium-catalyzed cross-coupling reaction between 5-bromotropolone (4) and an aryl siloxane to form the aryl-tropolone bond. The coupling of a variety of highly functionalized aryl siloxane derivatives was investigated and optimized coupling conditions were developed. It was discovered that a palladium catalyst with a high degree of phosphine ligand coordination (5 equiv of phosphine/mol Pd) was necessary to efficiently couple aryl siloxanes with 5-bromotropolone (4). In addition, the coupling approach has provided a direct comparison between siloxane and boronic acid coupling technologies that demonstrated that aryl siloxanes and boronic acids produce similar yields of highly functionalized biaryl products.     

Scope of the palladium-catalyzed aryl borylation utilizing bis-boronic acid

The Suzuki-Miyaura reaction has become one of the more useful tools for synthetic organic chemists. Until recently, there did not exist a direct way to make the most important component in the coupling reaction, namely the boronic acid. Current methods to make boronic acids often employ harsh or wasteful reagents to prepare boronic acid derivatives and require additional steps to afford the desired boronic acid. The scope of the previously reported palladium-catalyzed, direct boronic acid synthesis is unveiled, which includes a wide array of synthetically useful aryl electrophiles. It makes use of the newly available second generation Buchwald XPhos preformed palladium catalyst and bis-boronic acid. For ease of isolation and to preserve the often sensitive C-B bond, all boronic acids were readily converted to their more stable trifluoroborate counterparts.     

Palladium-catalyzed Suzuki cross-coupling of 2-haloselenophenes: synthesis of 2-arylselenophenes, 2,5-diarylselenophenes, and 2-arylselenophenyl ketones

We present herein our results on the Suzuki coupling reaction of 2-haloselenophenes with boronic acids catalyzed by palladium salt and describe a new route established to prepare 2-arylselenophenes and 2,5-diarylselenophenes in good yields. The reaction proceeded cleanly under mild conditions and was performed with aryl boronic acids bearing electron-withdrawing, electron-donating, and neutral substituents, in the presence of Pd(OAc)2, K2CO3/H2O in DME. In addition, by this protocol unsymmetrical aryl ketones were also obtained from 2-iodoselenophene and boronic acids via a carbonylative process.     

Versatile synthesis of 3,5-disubstituted 2-fluoropyridines and 2-pyridones

5-bromo-2-fluoro-3-pyridylboronic acid (3) was prepared in high yield by ortho-lithiation of 5-bromo-2-fluoropyridine (1), followed by reaction with trimethylborate. Suzuki reaction of 3 with a range of aryl iodides gave 3-monosubstituted 5-bromo-2-fluoropyridines 4 in excellent yields. A second Suzuki reaction utilizing the bromo constituent of 4 with aryl and heteroaryl boronic acids provided 3,5-disubstituted 2-fluoropyridines 5, which in turn could be converted to the corresponding 2-pyridones 6.